Asymptotically optimal policy for stochastic job shop scheduling problem to minimize makespan

This paper studies the large-scale stochastic job shop scheduling problem with general number of similar jobs, where the processing times of the same step are independently drawn from a known probability distribution, and the objective is to minimize the makespan. For the stochastic problem, we introduce the fluid relaxation of its deterministic counterpart, and define a fluid schedule for the fluid relaxation. By tracking the fluid schedule, a policy is proposed for the stochastic job shop scheduling problem. The expected value of the gap between the solution produced by the policy and the optimal solution is proved to be O(1), which indicates the policy is asymptotically optimal in expectation.     

An asymptotically optimal algorithm for large-scale mixed job shop scheduling to minimize the makespan

This paper considers the large-scale mixed job shop scheduling problem with general number of jobs on each route. The problem includes ordinary machines, batch machines (with bounded or unbounded capacity), parallel machines, and machines with breakdowns. The objective is to find a schedule to minimize the makespan. For the problem, we define a virtual problem and a corresponding virtual schedule, based on which our algorithm TVSA is proposed. The performance analysis of the algorithm shows the gap between the obtained solution and the optimal solution is O(1), which indicates the algorithm is asymptotically optimal.     

A heuristic to minimize total flow time in permutation flow shop

In this paper, we address an n-job, m-machine permutation flow shop scheduling problem for the objective of minimizing the total flow time. We propose a modification of the best-known method of Framinan and Leisten [An efficient constructive heuristic for flowtime minimization in permutation flow shops. Omega 2003;31:311–7] for this problem. We show, through computational experimentation, that this modification significantly improves its performance while not affecting its time-complexity.     

Minimizing makespan in an ordered flow shop with?machine-dependent processing times

We consider a generalization of the proportionate flow shop problem with the makespan objective. Each job has a processing requirement and each machine has a characteristic value. In our case, we assume that the time a job occupies a machine is equal to the processing requirement of the job plus a setup time that is equal to the characteristic value of that machine. In this paper, we consider permutation schedules and show that the problem is solvable in polynomial time when the number of machines is fixed.     

Analysis of antithetic sequences in flowshop scheduling to minimize makespan

The antithetic properties of flowshop sequences are investigated to improve the classical Monte Carlo method for solving the n -job, m -machine problem with minimization of makespan. The major issues considered are (1) establishing a negative correlation of the makespan values of forward and reverse sequences; (2) developing the Antithetical Monte Carlo (AMC) method, which can be used to quickly estimate the mean of the makespan distribution by exploiting the antithetic property of sequences; (3) using AMC to find low makespan values; (4) determining a threshold value of makespan beyond which it would be likely to find an optimal or near optimal makespan when reversing a sequence. Statistical tests indicate that the performance of AMC is superior to that of the classical Monte Carlo method. Possible applications of this concept are discussed including extensions to other mathematical problems with antithetic properties.     

An ant colony optimization approach for the proportionate multiprocessor open shop

Multiprocessor open shop makes a generalization to classical open shop by allowing parallel machines for the same task. Scheduling of this shop environment to minimize the makespan is a strongly NP-Hard problem. Despite its wide application areas in industry, the research in the field is still limited. In this paper, the proportionate case is considered where a task requires a fixed processing time independent of the job identity. A novel highly efficient solution representation is developed for the problem. An ant colony optimization model based on this representation is proposed with makespan minimization objective. It carries out a random exploration of the solution space and allows to search for good solution characteristics in a less time-consuming way. The algorithm performs full exploitation of search knowledge, and it successfully incorporates problem knowledge. To increase solution quality, a local exploration approach analogous to a local search, is further employed on the solution constructed. The proposed algorithm is tested over 100 benchmark instances from the literature. It outperforms the current state-of-the-art algorithm both in terms of solution quality and computational time.

     

An FPTAS for uniform machine scheduling to minimize makespan with linear deterioration

This paper consider m uniform (parallel) machine scheduling with linear deterioration to minimize the makespan. In an uniform machine environment, all machines have different processing speeds. Linear deterioration means that job’s actual processing time is a linear increasing function on its execution starting time. We propose a fully polynomial-time approximation scheme (FPTAS) to show the problem is NP-hard in the ordinary sense.     

Scheduling tool changes and special jobs on a single machine to minimize makespan

This paper considers a variation of the classical single machine scheduling problem with tool changes. In the variation, two sets of jobs, namely special jobs and normal jobs, are considered. By special jobs, we mean that each special job must be processed within the first prefixed time units of a tool life. To solve the scheduling problem with small size and moderate size, we propose two mathematical programming models. To solve the scheduling problem with large size, we propose three sets of algorithms and focus on the performance of six algorithms based on the studies of a new bin packing problem. Worst-case analysis is conducted. Numerical experiment shows that each of the six algorithms can solve instances with up to 5000 jobs in about 0.5 s with an average relative error less than 4%.     

Parallel-machine parallel-batching scheduling with family jobs and release dates to minimize makespan

We consider the scheduling of n family jobs with release dates on m identical parallel batching machines. Each batching machine can process up to b jobs simultaneously as a batch. In the bounded model, b<n, and in the unbounded model, b=∞. Jobs from different families cannot be placed in the same batch. The objective is to minimize the maximum completion time (makespan). When the number of families is a constant, for both bounded model and unbounded model, we present polynomial-time approximation schemes (PTAS).     

An asymptotic PTAS for batch scheduling with nonidentical job sizes to minimize makespan

Motivated by the existence of an APTAS (Asymptotic PTAS) for bin packing problem, we consider the batch scheduling problem with nonidentical job sizes to minimize makespan. For the proportional special version, i.e., there exists a fixed number α such that p _j =α s _j for every 1≤j≤n, we first present a lower bound of 3/2 for the approximation ratio and then design an APTAS. Supported by NNSF of China (No.10671108).     

Online tradeoff scheduling on a single machine to minimize makespan and maximum lateness

In this paper, we consider the following single machine online tradeoff scheduling problem. A set of n independent jobs arrive online over time. Each job \(J_{j}\) has a release date \(r_{j}\), a processing time \(p_{j}\) and a delivery time \(q_{j}\). The characteristics of a job are unknown until it arrives. The goal is to find a schedule that minimizes the makespan \(C_{\max } = \max _{1 \le j \le n} C_{j}\) and the maximum lateness \(L_{\max } = \max _{1 \le j \le n} L_{j}\), where \(L_{j} = C_{j} + q_{j}\). For the problem, we present a nondominated \(( \rho , 1 + \displaystyle \frac{1}{\rho } )\)-competitive online algorithm for each \(\rho \) with \( 1 \le \rho \le \displaystyle \frac{\sqrt{5} + 1}{2}\).     

Online scheduling with chain precedence constraints of equal-length jobs on parallel machines to minimize makespan

We study the online scheduling problem on m identical parallel machines to minimize makespan, i.e., the maximum completion time of the jobs, where m is given in advance and the jobs arrive online over time. We assume that the jobs, which arrive at some nonnegative real times, are of equal-length and are restricted by chain precedence constraints. Moreover, the jobs arriving at distinct times are independent, and so, only the jobs arriving at a common time are restricted by the chain precedence constraints. In the literature, a best possible online algorithm of a competitive ratio 1.3028 is given for the case \(m=2\). But the problem is unaddressed for \(m\ge 3\). In this paper, we present a best possible online algorithm for the problem with \(m\ge 3\), where the algorithm has a competitive ratio of 1.3028 for \(3\le m\le 5\) and 1.3146 for \(m\ge 6\).     

Job sequencing to minimize tool changeovers in flexible manufacturing systems

The combination of group technology and heuristic is used to schedule jobs on a machine equipped with an automatic tool changer &amp;lpar;ATC&amp;rpar;. The problem is prominent in flexible manufacturing systems where the efficiency in operation is, in part, obtained by use of ATC. The procedure presented here is efficient and does not require complex mathematics.     

On the NEH heuristic for minimizing the makespan in permutation flow shops

Over the last 20 years the NEH heuristic of Nawaz, Enscore, and Ham published in this journal has been commonly regarded as the best heuristic for minimizing the makespan in permutation flow shops. In recent years some authors claimed to develop new heuristics that are competitive or outperform NEH. Our study reveals that these claims are not justified. We also address the issue of a fair comparison of the NEH results with those obtained by metaheuristics. Finally we conduct a thorough analysis of NEH leading to its modification which secures the optimality in the two-machine case and improves the general performance.     

一种求解柔性工作车间调度问题的混合遗传算法

针对柔性工作车间调度问题(Flexible job-shop scheduling problem, FJSP),提出了一种基于混合遗传算法的求解方案,在初始种群中引入基于启发式规则生成的优良个体,并使用有效的交叉、变异算子避免不可行个体的产生,同时利用混沌序列的随机性和遍历性特点,在遗传进化的过程中增加基于混沌序列的邻域搜索功能,以提高遗传算法的执行效率.通过仿真实验验证了该算法的可行性和有效性.     

一种求解双目标flow shop排序问题的进化算法

提出一种求解双目标flow shop排序的递进多目标进化算法.算法采用改进的精英复制策略,在实现精英保留的前提下降低了计算复杂性;通过递进进化模式增加群体多样性,改善了算法收敛性;通过群体进化过程中对非劣解集进行竞争型可变邻域启发式搜索,增强了算法局部搜索性能.采用新算法和参照算法NSGA-II对31个标准双目标flow shop算例进行优化.研究结果表明,新算法在所有算例的求解中均获得了优于NSGA-II的非劣解集,验证了算法的有效性.     

The flexible blocking job shop with transfer and set-up times

The Flexible Blocking Job Shop (FBJS) considered here is a job shop scheduling problem characterized by the availability of alternative machines for each operation and the absence of buffers. The latter implies that a job, after completing an operation, has to remain on the machine until its next operation starts. Additional features are sequence-dependent transfer and set-up times, the first for passing a job from a machine to the next, the second for change-over on a machine from an operation to the next. The objective is to assign machines and schedule the operations in order to minimize the makespan. We give a problem formulation in a disjunctive graph and develop a heuristic local search approach. A feasible neighborhood is constructed, where typically a critical operation is moved (keeping or changing its machine) together with some other operations whose moves are “implied”. For this purpose, we develop the theoretical framework of job insertion with local flexibility, based on earlier work of Gröflin and Klinkert on insertion. A tabu search that consistently generates feasible neighbor solutions is then proposed and tested on a larger test set. Numerical results support the validity of our approach and establish first benchmarks for the FBJS.     

Single machine group scheduling to minimize mean flow time subject to due date constraints

This paper considers a single machine group scheduling problem. All jobs are classified into groups and the jobs within a group are processed contiguously on the machine. A sequence-independent setup time is incurred between each two consecutively scheduled groups. This paper presents a solution procedure which utilizes Smith's algorithm and a proposed modified Smith's algorithm to find an optimal job sequence and an optimal group sequence which minimizes the mean flow time of jobs subject to the constraint that no jobs are tardy. The complexity of the algorithm is shown to have a polynomial running time in the number of groups and jobs.     

Synchronization of material flow to aid production planning in a job shop

This paper discusses how synchronizing finish times for correspondingly numbered process operations of mating component parts (batches) can help a job shop take advantage of some aspects of the just-in-time philosophy.This paper proposes that the synchronization of process operations of mating parts (batches) can be an effective production planning tool that may actually decrease total throughput time where manufacturers are attempting to decrease in-process inventory. An example problem is included to demonstrate the situation.A production planner must keep in perspective all production orders when trying to decrease in-process inventory. The throughput times of all orders may be increased, while too much effort is concentrated on reducing in-process inventory costs of individual orders.