A Nonparametric Shewhart-Type Signed-Rank Control Chart Based on Runs

Measures of distributional symmetry based on quantiles, L-moments, and trimmed L-moments are briefly reviewed, and (asymptotic) sampling properties of commonly used estimators considered. Standard errors are estimated using both analytical and computer-intensive methods. Simulation is used to assess results when sampling from some known distributions; bootstrapping is used on sample data to estimate standard errors, construct confidence intervals, and test a hypothesis of distributional symmetry. Symmetry measures based on 2- or 3-trimmed L-moments have some advantages over other measures in terms of their existence. Their estimators are generally well behaved, even in relatively small samples.     

CAPABILITY MEASURES FOR m-DEPENDENT STATIONARY PROCESSES

Process capability indices, providing numerical measures on process potential and process performance, have received substantial research attention. Most research assumes that the process is normally distributed and the process data are independent. In real-world applications such as chemical, soft drinks, or tobacco/cigaratte manufacturing processes, process data are often auto-correlated. In this paper, we consider the capability indices Cp, Cpk, Cpm, Cpmk for strictly m-dependent stationary processes. We investigate the statistical properties of their natural estimators. We derive the asymptotic distributions, and establish confidence intervals so that capability testing can be performed.     

A two-stage estimation in the Clayton–Oakes model with marginal linear transformation models for multivariate failure time data

This paper considers the analysis of multivariate survival data where the marginal distributions are specified by semiparametric transformation models, a general class including the Cox model and the proportional odds model as special cases. First, consideration is given to the situation where the joint distribution of all failure times within the same cluster is specified by the Clayton–Oakes model (Clayton, Biometrika 65:141–151, l978; Oakes, J R Stat Soc B 44:412–422, 1982). A two-stage estimation procedure is adopted by first estimating the marginal parameters under the independence working assumption, and then the association parameter is estimated from the maximization of the full likelihood function with the estimators of the marginal parameters plugged in. The asymptotic properties of all estimators in the semiparametric model are derived. For the second situation, the third and higher order dependency structures are left unspecified, and interest focuses on the pairwise correlation between any two failure times. Thus, the pairwise association estimate can be obtained in the second stage by maximizing the pairwise likelihood function. Large sample properties for the pairwise association are also derived. Simulation studies show that the proposed approach is appropriate for practical use. To illustrate, a subset of the data from the Diabetic Retinopathy Study is used.     

Three estimators for the poisson regression model with measurement errors

We consider two consistent estimators for the parameters of the linear predictor in the Poisson regression model, where the covariate is measured with errors. The measurement errors are assumed to be normally distributed with known error variance σ _u ² . The SQS estimator, based on a conditional mean-variance model, takes the distribution of the latent covariate into account, and this is here assumed to be a normal distribution. The CS estimator, based on a corrected score function, does not use the distribution of the latent covariate. Nevertheless, for small σ _u ² , both estimators have identical asymptotic covariance matrices up to the order of σ _u ² . We also compare the consistent estimators to the naive estimator, which is based on replacing the latent covariate with its (erroneously) measured counterpart. The naive estimator is biased, but has a smaller covariance matrix than the consistent estimators (at least up to the order of σ _u ² ).     

The effect of tapering on the semiparametric estimators for nonstationary long memory processes

In this paper, we study, by a Monte Carlo simulation, the effect of the order p of “Zhurbenko-Kolmogorov” taper on the asymptotic properties of semiparametric estimators. We show that p  =  [d + 1/2] + 1 gives the smallest variances and mean squared errors. These properties depend also on the truncation parameter m. Moreover, we study the impact of the short-memory components on the bias and variances of these estimators. We finally carry out an empirical application by using four monthly seasonally adjusted logarithm Consumer Price Index series.      

Diagnostic tools in generalized Weibull linear regression models

We propose some statistical tools for diagnosing the class of generalized Weibull linear regression models [A.A. Prudente and G.M. Cordeiro, Generalized Weibull linear models, Comm. Statist. Theory Methods 39 (2010), pp. 3739–3755]. This class of models is an alternative means of analysing positive, continuous and skewed data and, due to its statistical properties, is very competitive with gamma regression models. First, we show that the Weibull model induces ma-ximum likelihood estimators asymptotically more efficient than the gamma model. Standardized residuals are defined, and their statistical properties are examined empirically. Some measures are derived based on the case-deletion model, including the generalized Cook's distance and measures for identifying influential observations on partial F-tests. The results of a simulation study conducted to assess behaviour of the global influence approach are also presented. Further, we perform a local influence analysis under the case-weights, response and explanatory variables perturbation schemes. The Weibull, gamma and other Weibull-type regression models are fitted into three data sets to illustrate the proposed diagnostic tools. Statistical analyses indicate that the Weibull model fitted into these data yields better fits than other common alternative models.     

Weighted likelihood based inference for P(X < Y)

This contribution deals with the statistical problem of evaluating the stress–strength reliability parameter R = P(X < Y), when both stress and strength data are prone to contamination. Standard likelihood inference can be badly affected by mild data inadequacies, that often occur in the form of several outliers. Then, robust tools are recommended. Here, inference relies on the weighted likelihood methodology. This approach has the advantage to lead to robust estimators, tests, and confidence intervals that share the main asymptotic properties of their classical counterparts. The accuracy of the proposed methodology is illustrated both by numerical studies and real-data applications.     

Semiparametric Smooth Coefficient Stochastic Frontier Model With Panel Data

ABSTRACT

We investigate the semiparametric smooth coefficient stochastic frontier model for panel data in which the distribution of the composite error term is assumed to be of known form but depends on some environmental variables. We propose multi-step estimators for the smooth coefficient functions as well as the parameters of the distribution of the composite error term and obtain their asymptotic properties. The Monte Carlo study demonstrates that the proposed estimators perform well in finite samples. We also consider an application and perform model specification test, construct confidence intervals, and estimate efficiency scores that depend on some environmental variables. The application uses a panel data on 451 large U.S. firms to explore the effects of computerization on productivity. Results show that two popular parametric models used in the stochastic frontier literature are likely to be misspecified. Compared with the parametric estimates, our semiparametric model shows a positive and larger overall effect of computer capital on the productivity. The efficiency levels, however, were not much different among the models. Supplementary materials for this article are available online.     

Estimation of a Conditional Copula and Association Measures

Abstarct. This paper is concerned with studying the dependence structure between two random variables Y ₁ and Y ₂ conditionally upon a covariate X. The dependence structure is modelled via a copula function, which depends on the given value of the covariate in a general way. Gijbels et al. (Comput. Statist. Data Anal., 55, 2011, 1919) suggested two non‐parametric estimators of the ‘conditional’ copula and investigated their numerical performances. In this paper we establish the asymptotic properties of the proposed estimators as well as conditional association measures derived from them. Practical recommendations for their use are then discussed.     

A new extended generalized Gompertz distribution with statistical properties and simulations

Abstract

Statistical distributions are very useful in describing and predicting real world phenomena. In many applied areas there is a clear need for the extended forms of the well-known distributions. Generally, the new distributions are more flexible to model real data that present a high degree of skewness and kurtosis. The choice of the best-suited statistical distribution for modeling data is very important.

In this article, we proposed an extended generalized Gompertz (EGGo) family of EGGo. Certain statistical properties of EGGo family including distribution shapes, hazard function, skewness, limit behavior, moments and order statistics are discussed. The flexibility of this family is assessed by its application to real data sets and comparison with other competing distributions. The maximum likelihood equations for estimating the parameters based on real data are given. The performances of the estimators such as maximum likelihood estimators, least squares estimators, weighted least squares estimators, Cramer-von-Mises estimators, Anderson-Darling estimators and right tailed Anderson-Darling estimators are discussed. The likelihood ratio test is derived to illustrate that the EGGo distribution is better than other nested models in fitting data set or not. We use R software for simulation in order to perform applications and test the validity of this model.     

Marshall–Olkin Extended Lomax Distribution and Its Application to Censored Data

The problem of making statistical inference about θ =P(X > Y) has been under great investigation in the literature using simple random sampling (SRS) data. This problem arises naturally in the area of reliability for a system with strength X and stress Y. In this study, we will consider making statistical inference about θ using ranked set sampling (RSS) data. Several estimators are proposed to estimate θ using RSS. The properties of these estimators are investigated and compared with known estimators based on simple random sample (SRS) data. The proposed estimators based on RSS dominate those based on SRS. A motivated example using real data set is given to illustrate the computation of the newly suggested estimators.     

Statistical Inference for Expectile‐based Risk Measures

Expectiles were introduced by Newey and Powell in 1987 in the context of linear regression models. Recently, Bellini et al. revealed that expectiles can also be seen as reasonable law‐invariant risk measures. In this article, we show that the corresponding statistical functionals are continuous w.r.t. the 1‐weak topology and suitably functionally differentiable. By means of these regularity results, we can derive several properties such as consistency, asymptotic normality, bootstrap consistency and qualitative robustness of the corresponding estimators in nonparametric and parametric statistical models.     

Estimating a positive normal mean

Let X ₁, X ₂, ..., X _n be a random sample from a normal population with mean μ and variance σ ². In many real life situations, specially in lifetime or reliability estimation, the parameter μ is known a priori to lie in an interval [a, ∞). This makes the usual maximum likelihood estimator (MLE) ̄ an inadmissible estimator of μ with respect to the squared error loss. This is due to the fact that it may take values outside the parameter space. Katz (1961) and Gupta and Rohatgi (1980) proposed estimators which lie completely in the given interval. In this paper we derive some new estimators for μ and present a comparative study of the risk performance of these estimators. Both the known and unknown variance cases have been explored. The new estimators are shown to have superior risk performance over the existing ones over large portions of the parameter space.     

A New Family of BAN Estimators for Polytomous Logistic Regression Models based on ϕ- Divergence Measures

In this paper we study polytomous logistic regression model and the asymptotic properties of the minimum ϕ-divergence estimators for this model. A simulation study is conducted to analyze the behavior of these estimators as function of the power-divergence measure ϕ_(λ) Research partially done when was visiting the Bowling Green State University as the Distinguished Lukacs Professor     

Generalized minimum distance estimators of a linear model with correlated errors

R^p of a linear regression model of the type Y = Xθ + ɛ, where X is the design matrix, Y the vector of the response variable and ɛ the random error vector that follows an AR(1) correlation structure. These estimators are asymptotically analyzed, by proving their strong consistency, asymptotic normality and asymptotic efficiency. In a simulation study, a better behaviour of the Mean Squared Error of the proposed estimator with respect to that of the generalized least squares estimators is observed. Received: November 16, 1998; revised version: May 10, 2000     

Estimation of parameters of bivariate normal distribution using concomitants of record values

In this paper, we discuss the concomitants of record values arising from the well-known bivariate normal distribution BVND(μ₁, μ₂,σ₁,σ₂, ρ). We have obtained the best linear unbiased estimators of μ₂ and σ₂ when ρ is known and derived some unbiased linear estimators of ρ when μ₂ and σ₂ are known, based on the concomitants of first n record values. The variances of these estimators have been obtained.     

Testing symmetry based on empirical likelihood

In this paper, we propose a general kth correlation coefficient between the density function and distribution function of a continuous variable as a measure of symmetry and asymmetry. We first propose a root-n moment-based estimator of the kth correlation coefficient and present its asymptotic results. Next, we consider statistical inference of the kth correlation coefficient by using the empirical likelihood (EL) method. The EL statistic is shown to be asymptotically a standard chi-squared distribution. Last, we propose a residual-based estimator of the kth correlation coefficient for a parametric regression model to test whether the density function of the true model error is symmetric or not. We present the asymptotic results of the residual-based kth correlation coefficient estimator and also construct its EL-based confidence intervals. Simulation studies are conducted to examine the performance of the proposed estimators, and we also use our proposed estimators to analyze the air quality dataset.     

Confidence Sets Based on Thresholding Estimators in High-Dimensional Gaussian Regression Models

We study confidence intervals based on hard-thresholding, soft-thresholding, and adaptive soft-thresholding in a linear regression model where the number of regressors k may depend on and diverge with sample size n. In addition to the case of known error variance, we define and study versions of the estimators when the error variance is unknown. In the known-variance case, we provide an exact analysis of the coverage properties of such intervals in finite samples. We show that these intervals are always larger than the standard interval based on the least-squares estimator. Asymptotically, the intervals based on the thresholding estimators are larger even by an order of magnitude when the estimators are tuned to perform consistent variable selection. For the unknown-variance case, we provide nontrivial lower bounds and a small numerical study for the coverage probabilities in finite samples. We also conduct an asymptotic analysis where the results from the known-variance case can be shown to carry over asymptotically if the number of degrees of freedom n ? k tends to infinity fast enough in relation to the thresholding parameter.     

Bias reduction in kernel density estimation

In this paper, we propose two kernel density estimators based on a bias reduction technique. We study the properties of these estimators and compare them with Parzen–Rosenblatt's density estimator and Mokkadem, A., Pelletier, M., and Slaoui, Y. (2009, ‘The stochastic approximation method for the estimation of a multivariate probability density’, J. Statist. Plann. Inference, 139, 2459–2478) is density estimators. It turns out that, with an adequate choice of the parameters of the two proposed estimators, the rate of convergence of two estimators will be faster than the two classical estimators and the asymptotic MISE (Mean Integrated Squared Error) will be smaller than the two classical estimators. We corroborate these theoretical results through simulations.     

A general central limit theorem and a subsampling variance estimator for α‐mixing point processes

We establish a central limit theorem for multivariate summary statistics of nonstationary α‐mixing spatial point processes and a subsampling estimator of the covariance matrix of such statistics. The central limit theorem is crucial for establishing asymptotic properties of estimators in statistics for spatial point processes. The covariance matrix subsampling estimator is flexible and model free. It is needed, for example, to construct confidence intervals and ellipsoids based on asymptotic normality of estimators. We also provide a simulation study investigating an application of our results to estimating functions.