Designing of a mixed-chain sampling plan based on the process capability index with chain sampling as the attributes plan

In this article, we propose a new mixed chain sampling plan based on the process capability index C_pk, where the quality characteristic of interest having double specification limits and follows the normal distribution with unknown mean and variance. In the proposed mixed plan, the chain sampling inspection plan is used for the inspection of attribute quality characteristics. The advantages of this proposed mixed sampling plan are also discussed. Tables are constructed to determine the optimal parameters for practical applications by formulating the problem as a non linear programming in which the objective function to be minimized is the average sample number and the constraints are related to lot acceptance probabilities at acceptable quality level and limiting quality level under the operating characteristic curve. The practical application of the proposed mixed sampling plan is explained with an illustrative example. Comparison of the proposed sampling plan is also made with other existing sampling plans.     

Designing of a variables two-plan system by minimizing the average sample number

This article proposes a variables two-plan sampling system called tightened-normal-tightened (TNT) sampling inspection scheme where the quality characteristic follows a normal distribution or a lognormal distribution and has an upper or a lower specification limit. The TNT variables sampling inspection scheme will be useful when testing is costly and destructive. The advantages of the variables TNT scheme over variables single and double sampling plans and attributes TNT scheme are discussed. Tables are also constructed for the selection of parameters of known and unknown standard deviation variables TNT schemes for a given acceptable quality level (AQL) and limiting quality level (LQL). The problem is formulated as a nonlinear programming where the objective function to be minimized is the average sample number and the constraints are related to lot acceptance probabilities at AQL and LQL under the operating characteristic curve.     

Sampling inspection for resubmitted lots

Lot resubmissions are allowed in situations where the original inspection results are suspected or when the supplier is allowed to opt for resampling as per the provisions of the contract etc. This paper examines the situation of resampling of lots and derives the performance measures of a resampling scheme having a single sampling plan for inspection. The usefulness and limitations of resampling of resubmitted lots are also discussed     

Optimal designing of a new mixed variable lot-size chain sampling plan based on the process capability index

In this paper, a new mixed sampling plan based on the process capability index (PCI) C_pk is proposed and the resultant plan is called mixed variable lot-size chain sampling plan (ChSP). The proposed mixed plan comprises of both attribute and variables inspections. The variable lot-size sampling plan can be used for inspection of attribute quality characteristics and for the inspection of measurable quality characteristics, the variables ChSP based on PCI will be used. We have considered both symmetric and asymmetric fraction non conforming cases for the variables ChSP. Tables are developed for determining the optimal parameters of the proposed mixed plan based on two points on the operating characteristic (OC) approach. In order to construct the tables, the problem is formulated as a non linear programming where the average sample number function is considered as an objective function to be minimized and the lot acceptance probabilities at acceptable quality level and limiting quality level under the OC curve are considered as constraints. The practical implementation of the proposed mixed sampling plan is explained with an illustrative real time example. Advantages of the proposed sampling plan are also discussed in terms of comparison with other existing sampling plans.     

A new mixed chain sampling plan based on the process capability index for product acceptance

This article proposes a new mixed chain sampling plan based on the process capability index C_pk, where the quality characteristic of interest follows the normal distribution with unknown mean and variance. The advantages of this proposed mixed sampling plan are also discussed. Tables are constructed to determine the optimal parameters for practical applications. In order to construct the tables, the problem is formulated as a nonlinear programming where the objective function to be minimized is the average sample number and the constraints are related to lot acceptance probabilities at acceptable quality level and limiting quality level under the operating characteristic curve. The practical application of the proposed mixed sampling plan is explained with an illustrative example. Comparison of the proposed sampling plan is also made with other existing sampling plans.     

Procedure for the selection of CSP-M one level skip-lot sampling inspection plans that have a single-sampling plan with acceptance number zero as the reference plan

This paper presents a procedure for the selection of CSP-M one-level skip-lot sampling plans, designated as CSP-MSkSP, that have a single-sampling plan with acceptance number zero as the reference plan. The parameters of the plan are determined when two points on the operating characteristic curve are specified, the two points being (p1,) and (p2,), where p1 is the acceptable quality level, is the producer's risk, p2 is the limiting quality level and is the consumer's risk.     

A flexible sampling scheme for variables inspection with loss consideration

This article develops a variables sampling scheme for resubmitted lots by incorporating the concept of Taguchi loss function. The probability of lot acceptance is derived based on the exact sampling distribution and two-point condition on operating characteristic curve is used to determine the plan parameters that meet both the producer's and consumer's quality and risk requirements. Moreover, the performance of the proposed variables resubmitted sampling plan is investigated and compared with the classical variables single sampling plan. The results indicate that the developed resubmitted sampling plan can provide the same protection with less inspection when the submitted lot is good enough. Tables of the plan parameters under various conditions are provided and the use of the proposed plan is also illustrated with an example.     

Design and Construction of a Variables Repetitive Group Sampling Plan for Unilateral Specification Limit

This paper attempts to develop a repetitive group sampling (RGS) plan by variables inspection for controlling the process fraction defective or the number of nonconformities when the quality characteristic follows a normal distribution and has only the lower or upper specification limit. The proposed sampling plan is derived by the exact sampling distribution rather than the approximation approach. The plan parameters are solved by a nonlinear optimization model which minimizes the average sample number required for inspection and fulfills the classical two-point conditions on the operating characteristic (OC) curve. The efficiency of the proposed variables RGS is examined and also compared with the existing variables single sampling plan in terms of the sample size required for inspection. The results indicate that the proposed variables RGS plan could significantly reduce samples required for inspection compared to the traditional variables single sampling plan.     

Designing an economically optimal repetitive group-sampling plan based on loss functions

Acceptance sampling is a quality assurance tool, which provides a rule for the producer and the consumer to make acceptance or rejection decision about a lot. This paper attempts to develop a more efficient sampling plan, variables repetitive group sampling plan, based on the total loss to the producer and consumer. To design this model, two constraints are considered to satisfy the opposing priorities and requirements of the producer and the consumer by using Acceptable quality level (AQL) and Limiting quality level (LQL) points on operating characteristic (OC) curve. The objective function of this model is constructed based on the total expected loss. In order to illustrate the application of the proposed model, an example is presented. In addition, the effects of process parameters on the optimal solution and the total expected loss are studied by performing a sensitivity analysis. Finally, the efficiency of the proposed model is compared with the variables single sampling plan, the variables double sampling plan and the repetitive group sampling plan of Balamurali and Jun (2006) in terms of average sample number, total expected loss and its difference with ideal OC curve.     

Selection of conditional sampling plans for given AQL and LQL

This paper presents procedures and tables for the selection of conditional sampling plans, viz. conditional double sampling plan, chain-deferred sampling plan, link sampling plan, and ChSP-4A chain sampling plan for given acceptable quality level (AQL), producer's risk, limiting quality level and consumer's risk giving minimum sample size at AQL under the conditions of the Poisson model for the operating characteristic curve.     

Repetitive group sampling procedure for variables inspection

This paper introduces the concept of repetitive group sampling (RGS) for variables inspection. The repetitive group sampling plan for variables inspection will be useful when testing is costly and destructive. The advantages of the variables RGS plan over variables single sampling plan, variables double sampling plan and attributes RGS plan are discussed. Tables are also constructed for the selection of parameters of known and unknown standard deviation variables repetitive group sampling plan indexed by acceptable quality level and limiting quality level.     

Selection of CSP-V continuous sampling plans

MIL-STD-1235C establishes standard procedures for the selection and implementation of single- and multi-level continuous sampling plans, such as CSP-1, CSP-F, CSP-2, CSP-T and CSP-V. CSP-V is a single-level continuous sampling procedure which provides for alternating sequences of 100%inspection (either at full or reduced clearance number) and sampling inspection. It requires a return to 100% inspection whenever a non-confirming unit is found during sampling inspection, but provides for a reduced clearance number upon demonstration of superior product quality. The CSP-V procedure serves as an alternative to the CSP-T procedure where a reduction in sampling frequency has no economic merit. In this paper, expressions for the average outgoing quality, the average fraction inspected and the operating characteristic function are derived using a Markov chain model. Four tables are given to enable the selection of CSP-V plans when the acceptable quality level or the limiting quality level and the

average outgoing quality limit are specified.     

Determination of a new mixed variable lot-size multiple dependent state sampling plan based on the process capability index

This article proposes a new mixed variable lot-size multiple dependent state sampling plan in which the attribute sampling plan can be used in the first stage and the variables multiple dependent state sampling plan based on the process capability index will be used in the second stage for the inspection of measurable quality characteristics. The proposed mixed plan is developed for both symmetric and asymmetric fraction non conforming. The optimal plan parameters can be determined by considering the satisfaction levels of the producer and the consumer simultaneously at an acceptable quality level and a limiting quality level, respectively. The performance of the proposed plan over the mixed single sampling plan based on C_pk and the mixed variable lot size plan based on C_pk with respect to the average sample number is also investigated. Tables are constructed for easy selection of plan parameters for both symmetric and asymmetric fraction non conforming and real world examples are also given for the illustration and practical implementation of the proposed mixed variable lot-size plan.     

Optimal designing of skip-lot sampling plan of type SkSP-2 with group acceptance sampling plan as reference plan under Burr-type XII distribution

In this paper, skip-lot sampling plan of type SkSP-2 with group acceptance sampling plans is proposed when the lifetime of the product follows the Burr-type XII distributions. The optimal parameters of the proposed plan are determined when two points on operating characteristics curve namely acceptable quality level and limiting quality level and the number of testers are specified. We also considered the Burr-type XII distribution to find the plan parameters. Several tables are given for practical use. We compare the results of proposed plan with the existing plans. Results are explained using real-world examples.     

A mixed double sampling plan based on Cpk

Abstract

Acceptance sampling plans are quality tools for the manufacturer and the customer. The ultimate result of reduction of nonconforming items will increase the profit of the manufacturer and enhance the satisfaction of the consumer. In this article, a mixed double sampling plan is proposed in which the attribute double sampling inspection is used in the first stage and a variables sampling plan based on the process capability index C_pk is used in the second stage. The optimal parameters are determined so that the producer’s and the consumer’s risks are to be satisfied with minimum average sample number. The optimal parameters of the proposed plan are estimated using different plan settings using two points on the operating characteristic curve approach. In designing the proposed mixed double sampling plan, we consider the symmetric and asymmetric nonconforming cases under variables inspection. The efficiency of the proposed plan is discussed and compared with the existing sampling plans. Tables are constructed for easy selection of the optimal plan parameters and an industrial example is also included for implementation of the proposed plan.     

Predictive design of single sampling attribute plans

The design of a sampling inspection plan is usually based on the properties of the operating characteristic curve. This approach ensures that the plan has adequate power to discriminate a lot of acceptable quality from a lot rejectable quality. However, the designed plan need not necessarily have adequate predictive power when the sentenced lot is re-inspected using the same sampling plan. The paper introduces a new design approach for the single sampling attributes plan ensuring the decision of acceptance or rejection is consistent for both current and any future inspection of the lot. The proposed design controls the risks of a future sample leading to a contradictory decision of acceptance or rejection of the lot. An increase in sample size is required to achieve the required predictive power if the true lot quality fails to be at very low fraction non-conforming levels. A Bayesian analysis is also provided.     

Selection of csp-t plans

Various continuous sampling plans have been proposed for monitoring the quality of continuous production processes. The multi-level continuous sampling plan of MIL-STD-1235C (1988) is designated as CSP-T Plan. CSP-T plan is a three-level tightened continuous sampling plan. It requires a switch to 100% inspection, at any level, whenever a nonconforming unit is found. This provides quick rectification in the event of a shift in quality. In this paper certain performance characteristics of CSP-T plan are derived using the approach of Stephens (1979) under the assumption that the production process is in statistical control. For the selection of CSP-T plans, two tables are given. These tables can be used to obtain parameters i (clearance interval) and f (sampling fraction) of the CSP-T plan for given acceptable quality level (AQL) with producer’ risk α=0.05 or the limiting quality level(LQL) with consumer’ risk β=0.10 and the outgoing quality limit(AOQL). Two examples are also given to illustrate the selection of plans from these tables     

Developing a variables two-plan sampling system for product acceptance determination

In this paper, a variables tightened-normal-tightened (TNT) two-plan sampling system based on the widely used capability index C_pk is developed for product acceptance determination when the quality characteristic of products has two-sided specification limits and follows a normal distribution. The operating procedure and operating characteristic (OC) function of the variables TNT two-plan sampling system, and the conditions for solving plan parameters are provided. The behavior of OC curves for the variables TNT sampling system under various parameters is also studied, and compared with the variables single tightened inspection plan and single normal inspection plan.     

Selection of tightened two-level continuous sampling plans

Lieberman and Solomon (1955) introduced multi-level continuous sampling plans and Derman et al. (1957) extended them as tightened multi-level continuous plans. MLP-T plan is one of the three tightened multi-level continuous sampling plans of Derman et al. (1957). In this paper, we restrict our discussion to MLP-T plans with two sampling levels. Using a Markov chain model, expressions for the average outgoing quality, the average fraction inspected and the operating characteristic function are derived. Four tables are given to enable selection of MLP-T plans with two sampling levels when the acceptable quality level or the limiting quality level and the average outgoing quality limit are specified.     

Design and evaluation of skip-lot sampling inspection plans with double-sampling plan as the reference plan

This paper presents a design for skip-lot sampling inspection plans with the double-sampling plan as the reference plan, so as to reduce the sample size and produce more efficient plans in return for the same sampling effort. The efficiency of the proposed plan compared with that of the conventional double-sampling plan is also discussed. The need for smaller acceptance numbers under the plan is highlighted. Methods of selecting the plan indexed by the acceptable quality level and limiting quality level, and by the acceptable quality level and average outgoing quality level are also presented.