Selection of ChSP-1 chain sampling plans for given acceptable quality level and limiting quality level

Procedures and tables are given for the selection of chain sampling plans of type ChSP-1 for given acceptable quality level, producer's risk, limiting quality level and consumer's risk. Selection of ChSP-1 plan is discussed for both proportion nonconforming and the number of nonconformities per unit.     

Selection of multiple deferred state MDS-1 sampling plans for given acceptable quality level and limiting quality level involving minimum risks

A table and a procedure are given for finding the multiple deferred state sampling plan of type MDS-1 involving minimum sum of risks for specified acceptable quality level and limiting quality level.     

Construction and selection of skip-lot sampling inspection plans of type SkSP-2 indexed by indifference quality level and maximum allowable per cent defective

This paper presents tables based on the Poisson model, for the selection of skip-lot sampling plans of type SKSP-2, with a single-sampling plan which has a zero acceptance number as a reference plan. The indifference quality level (IQL) and the maximum allowable per cent defective (MAPD) are the criteria used for fixing the plan. Procedures for the selection of plans for given conditions of (IQL, average outgoing quality limit) and (MAPD, average outgoing quality limit) are also discussed.     

Average outgoing quality of CSP-C continuous sampling plan under short run production processes

A CSP-C continuous sampling plan is a new single-level continuous sampling procedure developed by Govindaraju & Kandasamy (2000) by incorporating the concept of acceptance number to the CSP-1 plan for the application of continuous production processes. In this new plan, the sampling inspection phase is characterized by a maximum allowable number of non-conforming units, c, and a constant sampling rate, f. Govindaraju & Kandasamy (2000) derived the performance measures such as average outgoing quality (AOQ), average fraction inspected (AFI) etc, of the CSP-C plan using a Markov chain model for long run production processes. Yang (1983) has observed that the AOQ and AFI, being long run average measures, are not satisfactory measures of performance for short run production processes. Hence, formulas are derived in this paper, using the renewal theory approach enabling one to compute AOQ and AFI for both long run and short run production processes. Numerical illustrations are also given. By simulation, the accuracy of the short run measures is studied.     

An improved sampling plan by variables inspection with consideration of process yield and quality loss

Repetitive group sampling (RGS) plan, a modified version of single sampling (SS) plan, has been shown to be more efficient than the SS plan for lot sentencing. However, because it does not consider the valuable sample information from preceding lots, that could reduce its sampling efficiency and discriminatory power. Therefore, this study proposes a modified-RGS plan by considering the quality history of preceding lots based on the C_pmk index. Additionally, the mathematical model for the plan parameters is formulated such that the objective function is to minimize the average sample number (ASN), and the required quality levels and risks as specified by producer and consumer are satisfied. The performance of the proposed plan is examined and compared with traditional sampling plans. Finally, an example is presented to illustrate its applicability.     

Selection of a sampling plan indexed with maximum allowable average outgoing quality

SUMMARY This paper introduces a new concept of maximum allowable average outgoing quality MAAOQ , which is the average outgoing quality at the inflection point. The procedure for designing a single sampling plan indexed through the maximum allowable per cent defective and MAAOQ is stated. Tables are constructed for the selection of parameters for the plan, and parametric conversions are also studied.     

Selection of a tightened-normal-tightened system for given values of the acceptable quality level and limiting quality level

A table and a procedure are given to find the tightened-normal-tightened system involving the minimum sum of producer's and consumer's risks for a specified acceptable quality level and limiting quality level.     

Selection of multiple deferred (dependent) state sampling plans for given acceptable quality level and limiting quality level

A table and a procedure are given for finding the multiple deferred (dependent) state sampling plans of type MDS-(c1, c2) involving minimum sum of producer's and consumer's risks for specified acceptable quality level and limiting quality level.     

Procedure for the selection of CSP-M one level skip-lot sampling inspection plans that have a single-sampling plan with acceptance number zero as the reference plan

This paper presents a procedure for the selection of CSP-M one-level skip-lot sampling plans, designated as CSP-MSkSP, that have a single-sampling plan with acceptance number zero as the reference plan. The parameters of the plan are determined when two points on the operating characteristic curve are specified, the two points being (p1,) and (p2,), where p1 is the acceptable quality level, is the producer's risk, p2 is the limiting quality level and is the consumer's risk.     

On the performance of a sampling scheme in statistical quality control using incomplete prior information

Assume that a lower bound is known for the probability that the fraction defective of incoming lots does not exceed a certain level. Sampling plans which incorporate this information have been developed by Krumbholz and Schröder. Taking a linear cost model, the range of the gains that may be achieved using these plans instead of the minimax sampling plan is discussed. Some technical results concerning existence and uniqueness of sampling plans based on incomplete prior information are proved.     

Analytical approach for determining the cost optimum raw material quality level

In this paper, the expected cost of a raw

material quality characteristic is determined and

the cost optimum quality level is found. A series

of piecewise linear functions is used torepresent a general cost function. Examples are given in

which the distributions of quality characteristics are treated as being either

uniform or normal. The relationship between a raw

material characteristic and manufacturing cost is

assumed to be known

Determining cost optimum quality level Manitoba     

Minimum risks chain sampling plans (ChSP-4(c1, c2,)) indexed by acceptable quality level and limiting quality level

summary In this paper, an approach for designing ChSP-4 (c1,c2) plans while minimizing the sum of risks when the sample size is fixed is described. A set of quality level Also, an improved procedure for constructing plans with a given operation ratio is provided.     

Estimating standard error of intra-class correlation coefficients up to three level unbalanced nested clinical trials

ABSTRACT

Very often researchers plan a balanced design for cluster randomization clinical trials in conducting medical research, but unavoidable circumstances lead to unbalanced data. By adopting three or more levels of nested designs, they usually ignore the higher level of nesting and consider only two levels, this situation leads to underestimation of variance at higher levels. While calculating the sample size for three-level nested designs, in order to achieve desired power, intra-class correlation coefficients (ICCs) at individual level as well as higher levels need to be considered and must be provided along with respective standard errors. In the present paper, the standard errors of analysis of variance (ANOVA) estimates of ICCs for three-level unbalanced nested design are derived. To conquer the strong appeal of distributional assumptions, balanced design, equality of variances between clusters and large sample, general expressions for standard errors of ICCs which can be deployed in unbalanced cluster randomization trials are postulated. The expressions are evaluated on real data as well as highly unbalanced simulated data.     

Design of generalized CSP-C continuous sampling plan

In this paper, the concept acceptance number has been incorporated to the single level continuous sampling plan CSP-1. The advantage of the proposed plan, designated as the CSP-C plan, is to achieve a reduction in the average fraction inspected at good quality levels. Nomographs for the design of the proposed plan are presented. The expressions of the performance measures for this new plan such as OC, AOQ and AFI are also provided.     

Modified tables for the selection of quick switching systems for values of the given acceptable quality level and limiting quality level

The paper presents modified tables derived from the work of Romboski and Soundararajan & Arumainayagam for the selection of quick switching systems of type QSS-2, QSS-3 and QSS-4 for given values of acceptable quality level, limiting quality level, producer's risk and consumer's risk. The plans selected from the tables will involve a smaller average sample number at the acceptable quality level.     

Optimal designing of an SkSP-R double sampling plan

In this article, we propose a method of planning and determining the optimum parameters of a SkSP-R skip-lot sampling plan by using the attribute double sampling plan as the reference plan. The SkSP-R plan is a new type of skip-lot sampling plan which has a provision for re-inspecting the submitted lots. The optimal plan parameters of the suggested sampling plan are estimated with the target that the average sample number be minimized and satisfying both the specified producer's as well as the consumer's risks simultaneously. In order to obtain the optimum parameters, tables are also built for different combinations of the acceptable quality level and the limiting quality level in conjunctions with different producer's and consumer's risks. An illustrative example is provided for the implementation of the suggested plan. The advantages of the suggested plan over the existing conventional sampling plans and other existing skip-lot sampling plans are also described.     

Developing of a new system of skip-lot reinspection schemes

The skip-lot sampling plans are widely used in industries for quality inspection of products in order to reduce the sampling costs and inspection efforts when products have good quality history. Also, the skip-lot sampling plan concept is sound and useful and it is economically advantageous to use the skip-lot approach in the design of sampling plans. Thus, the skip-lot sampling plans are useful to minimize the cost of the inspection particularly in costly and destructive testing. Hence, a new system of skip-lot sampling plans designated as SkSP-2-R plan is developed in this article by incorporating the idea of resampling procedure in the skip-lot sampling plans of type SkSP-2. A Markov chain formulation and derivation of performance measures for this new plan are presented. The properties and advantages of the SkSP-2-R plan are studied with single sampling plan as the reference plan. The response-to-change characteristics of the SkSP-2-R plan are also investigated, based on the average run length.     

Two-Stage Variables Acceptance Sampling Plans Using Process Loss Functions

In this article, a variable two-stage acceptance sampling plan is developed when the quality characteristic is evaluated through a process loss function. The plan parameters of the proposed plan are determined by using the two-point approach and tabulated according to various quality levels. Two cases are discussed when the process mean lies at the target value and when it does not, respectively. Extensive tables are provided for both cases and the results are explained with examples. The advantage of the proposed plan is compared with the existing variable single acceptance sampling plan using the process loss function.     

Modified tightened two-level continuous sampling plans

In this paper, a modification is proposed on the tightened two-level continuous sampling plan. The tightened two-level plan is one of the three tightened multi-level continuous sampling plans of Derman et al. (1957) with two sampling levels. A modified tightened two-level continuous sampling plan is considered, for which the rules concerning partial inspection depend, in part, on the length of time it takes to decide that the process quality is good enough that 100% inspection may be suspended (e.g. the time required to find i consecutive items free of defects). Using a Markov chain model, expressions for the performance measures of the modified MLP-T-2 plan are derived. The modified MLP-T-2 plan is shown to be identical to the MLP-T-2 plan. Tables are also presented for the selection of the modified MLP-T-2 plan when the AQL or LQL and AOQL are specified.     

Designing of a mixed-chain sampling plan based on the process capability index with chain sampling as the attributes plan

In this article, we propose a new mixed chain sampling plan based on the process capability index C_pk, where the quality characteristic of interest having double specification limits and follows the normal distribution with unknown mean and variance. In the proposed mixed plan, the chain sampling inspection plan is used for the inspection of attribute quality characteristics. The advantages of this proposed mixed sampling plan are also discussed. Tables are constructed to determine the optimal parameters for practical applications by formulating the problem as a non linear programming in which the objective function to be minimized is the average sample number and the constraints are related to lot acceptance probabilities at acceptable quality level and limiting quality level under the operating characteristic curve. The practical application of the proposed mixed sampling plan is explained with an illustrative example. Comparison of the proposed sampling plan is also made with other existing sampling plans.