Reliability and Some Characteristics of Circular Consecutive-k-Within-m-Out-of-n:F System

A system can be classified with respect to the physical arrangement of its components and the functioning principle. A circular consecutive k-within-m-out-of-n:F system consists of n circularly ordered components and fails if and only if there are m consecutive components that include among them at least k failed components. A circular consecutive k-within-m-out-of-n:F system turns into circular consecutive k-out-of-n:F for m = k and k-out-of-n:F system for m = n. In this study, signature-based analysis of circular consecutive k-within-m-out-of-n:F system is performed. A new approximation to this system is provided based on maximum number of failed components and an illustrative example is given for different values of n, m, k to compare the approximate results with simulated and exact results.     

Dynamic Reliability Evaluation of Consecutive-k-Within-m-Out-of-n:F System

A consecutive k-within-m-out-of-n:F system consists of n linearly ordered components and fails if and only if there are m consecutive components which include among them at least k failed components. This system model generalizes both consecutive k-out-of-n:F and k-out-of-n:F systems. In this article, we study the dynamic reliability properties of consecutive k-within-m-out-of-n:F system consisting of exchangeable dependent components. We also obtain some stochastic ordering results and use them to get simple approximation formulae for the survival function and mean time to failure of this system.     

Reliability Evaluation for a Multi-State System Under Stress-Strength Setup

The two most commonly used reliability models in engineering applications are binary k-out-of-n:G and consecutive k-out-of-n:G systems. Multi-state k-out-of-n:G and multi-state consecutive k-out-of-n:G systems have been proposed as an extension of these systems and they have been found to be more flexible tool for modeling engineering systems. In this article, multi-state systems, in particular, multi-state k-out-of-n:G and multi-state consecutive k-out-of-n:G, are considered in a stress-strength setup. The states of the system are classified considering the number of components whose strengths above (below) the multiple stresses available in an environment. The exact state probabilities are provided and the results are illustrated for various stress-strength distributions. Maximum likelihood estimators of state probabilities are also presented.     

Reliability of weighted k-out-of-n: G systems consisting of two types of components and a cold standby component

In this article, the influence of a cold standby component to the reliability of weighted k-out-of-n: G systems consisting of two different types of components is studied. Weighted k-out-of-n: G systems are generalization of k-out-of-n systems that has attracted substantial interest in reliability theory because of their various applications in engineering. A method based on residual lifetimes of mixed components is presented for computing reliability of weighted k-out-of-n: G systems with two types of components and a cold standby component. Reliability and mean time to failure of different structured systems have been computed. Moreover, obtained results are used for defining optimal system configurations that can minimize the overall system costs.     

Condition-based maintenance policy for linear consecutive-k-out-of-n: F system

In the article, a condition-based maintenance policy is proposed for a linear consecutive-k-out-of-n: F system. The failure times of components are assumed to be independent and identically distributed. It is assumed that the component states in the system can be known at any time and the system failure can be detected immediately. The preventive maintenance action is based on the number of working components in minimal cut sets of the system. If there is at least one minimal cut set consisting of only one working component, the system is maintained preventively after a certain time interval. The proposed policy is compared with corrective maintenance and age-based maintenance policies. As an extended case, it is assumed that the component states can only be known by inspection, but the system failure can be detected immediately. In this case, the system is inspected periodically and is also maintained preventively based on the system state at inspection. Numerical examples are studied to evaluate the performance of the proposed policy and investigate the effects of cost parameters on the expected cost rate.     

On capacity evaluation for multi-state weighted k-out-of-n system

ABSTRACT

Weighted k-out-of-n system has been widely used in various engineering areas. Performance of such system is characterized by the total capacity of the components. Therefore, capacity evaluation is of great importance for research on the behavior of the system over time. Capacity evaluation for binary weighted k-out-of-n system has been reported in the literature. In this paper, to shorten computational time, we first develop a multiplication method for capacity evaluation of binary weighted k-out-of-n system. We then generalize capacity evaluation to multi-state weighted k-out-of-n system. Recursive algorithm and multiplication algorithm are developed for capacity evaluation for such system. Comparison is made of the two methods in different aspects. An illustrative example of an oil transmission system is presented to demonstrate the implementation of the proposed methods.     

A Note on the Regression of Order Statistics

This paper examines the relationships between the mean residual life functions of parallel and k-out-of-n systems with the regression of order statistics. Using these relationships, the results and properties about the mean residual life function of those systems can be used for the regression of order statistics and vice versa. Finally, the paper proposes a definition for the mean residual life function of a k-out-of-n system when the number of failed components of the system is known.     

On residual lifetimes in sequential (n ? k?+?1)-out-of-n systems

Sequential order statistics is an extension of ordinary order statistics. They model the successive failure times in sequential k-out-of-n systems, where the failures of components possibly affect the residual lifetimes of the remaining ones. In this paper, we consider the residual lifetime of the components after the kth failure in the sequential (n − k + 1)-out-of-n system. We extend some results on the joint distribution of the residual lifetimes of the remaining components in an ordinary (n − k + 1)-out-of-n system presented in Bairamov and Arnold (Stat Probab Lett 78(8):945–952, 2008) to the case of the sequential (n − k + 1)-out-of-n system.     

On the mean residual life of a generalized k-out-of-n system

A generalized k-out-of-n system consists of N modules in which the i th module is composed of n_i components in parallel. The system failswhen at least f components in the whole system or at least k consecutive modules have failed. In this article, we obtain the mean residual life function of such a generalized k-out-of-n system under different conditions, namely, when the number of components in each module is equal or unequal and when the components of the system are independent or exchangeable.     

Failure Data Analysis with Extended Weibull Distribution

A consecutive k-out-of-n: G system consists of n linearly ordered components functions if and only if at least k consecutive components function. In this article we investigate the consecutive k-out-of-n: G system in a setup of multicomponent stress-strength model. Under this setup, a system consists of n components functions if and only if there are at least k consecutive components survive a common random stress. We consider reliability and its estimation of such a system whenever there is a change and no change in strength. We provide minimum variance unbiased estimation of system reliability when the stress and strength distributions are exponential with unknown scale parameters. A nonparametric minimum variance unbiased estimator is also provided.     

Mean Time to Failure of Weighted k-out-of-n: G Systems

The purpose of this article is to develop a Monte-Carlo simulation algorithm for computing mean time to failure (MTTF) of weighted-k-out-of-n:G and linear consecutive-weighted-k-out-of-n:G systems. Our algorithm is based on the use of appropriately defined stochastic process which represents the total weight of the system at time t. These stochastic processes are explicitly defined and used along with the ordered component lifetimes to simulate MTTF of the systems with weighted components.     

The mean general residual lifetime of (n − k + 1)-out-of-n systems with exchangeable components

The study of the reliability properties of (n ? k + 1)-out-of-n systems has gained a great deal of attention, from both theoretical and practical perspectives. In this article, we consider (n ? k + 1)-out-of-n systems with exchangeable components and study the stochastic properties of two forms of residual lifetimes of such systems under the following conditions: n ? r + 1 (r ? k) components of the system are operating at time t > 0, and/or the rth (r < k) component has failed, but the system is working at time t. In addition, some results relating to the functions of the mean general residual lifetimes (MGRL) are derived for these systems. Finally, in accordance with the generalized Farlie–Gumbel–Morgenstern model, we present the reliability properties of the general residual lifetime of (n ? k + 1)-out-of-n systems and investigate the asymptotic behavior of the proposed MGRL functions with exponential marginals.     

Some Properties of Order Statistics When the Sample Size Is Random

ABSTRACT

The study of r-out-of-n systems is of utmost importance in reliability theory. In this note, we study closure of different partial orders under the formation of r-out-of-N and (N ? s)-out-of-N systems when the number of components N, forming the system, is a random variable having support {k, k + 1,…}, where k is a fixed positive integer, r ∈ {1,…, k} and s ∈ {0, 1,…, k ? 1}. This generalizes quite a few results already known in the literature. We also study the closure of different partial orders when two systems are formed out of different random number of components.     

Allocating Redundancies to k-out-of-n Systems with Independent and Heterogeneous Components

This paper studies the allocation of independent redundancies with a common life distribution to k-out-of-n systems of independent components with non identical life distributions. A sufficient condition is found for allocating more active redundancies to the weaker component to gain a larger lifetime for k-out-of-n systems, and assigning more standby redundancies to the weaker (stronger) components is proved to yield larger lifetime for series (parallel) systems in the sense of the increasing concave (convex) order. Also, the optimal policy is proved to be majorized by all other policies when the system’s components are stochastically ordered.     

On the Mean Remaining Strength of the k-Out-of-n:F System with Exchangeable Components

In this article, we consider the mean remaining strength of a k-out-of-n:F system in the stress–strength setup for the exchangeable components. We provide some results for parallel and series systems under this setup, where X₁, X₂, …, X_n are the strengths of the components designed under the common stress. An illustrative example is given for the k-out-of- n:F system using the multivariate FGM distribution.     

Extremum sieve estimation in k-out-of-n systems

This article considers the non parametric estimation of absolutely continuous distribution functions of independent lifetimes of non identical components in k-out-of-n systems, 2 ? k ? n, from the observed “autopsy” data. In economics, ascending “button” or “clock” auctions with n heterogeneous bidders with independent private values present 2-out-of-n systems. Classical competing risks models are examples of n-out-of-n systems. Under weak conditions on the underlying distributions, the estimation problem is shown to be well-posed and the suggested extremum sieve estimator is proven to be consistent. This article considers the sieve spaces of Bernstein polynomials which allow to easily implement constraints on the monotonicity of estimated distribution functions.     

Ordering New Conditional Residual Lifetimes of k-out-of-n Systems

This article introduces a new residual life of (n ? k + 1)-out-of-n systems consisting of n independent and identically distributed components, given that the total number of failures of components is not less than l at time t, and the system is still working. Some stochastic comparisons of residual lifetimes are conducted, and behaviors of DLR and ILR are given.     

Nonparametric model checking for k-out-of-n systems

It is an important problem in reliability analysis to decide whether for a given k-out-of-n system the static or the sequential k-out-of-n model is appropriate. Often components are redundantly added to a system to protect against failure of the system. If the failure of any component of the system induces a higher rate of failure of the remaining components due to increased load, the sequential k-out-of-n model is appropriate. The increase of the failure rate of the remaining components after a failure of some component implies that the effects of the component redundancy are diminished. On the other hand, if all the components have the same failure distribution and whenever a failure occurs, the remaining components are not affected, the static k-out-of-n model is adequate. In this paper, we consider nonparametric hypothesis tests to make a decision between these two models. We analyze test statistics based on the profile score process as well as test statistics based on a multivariate intensity ratio and derive their asymptotic distribution. Finally, we compare the different test statistics.     

On the Use of the Importance Measure for Multi-State Repairable k-out-of-n: G Systems

Importance measures in reliability systems are used to identify weak components in contributing to proper functioning of the system. Traditional importance measures mainly concern the change of the system reliability as the change of the reliability of one component and seldom consider the expected number of repairs of the objective component in unit time. This paper proposes an improvement potential rate importance (IPR) to verify the effectiveness of the improvement in system reliability for multi-state repairable k-out-of-n: G systems. Then the comparisons between IPR and Birnbaum importance are discussed. Finally, a case study is given to demonstrate the proposed IPR.