Number of Working Components in Consecutive k-out-of-n System While It Is Working

In this article we study the distribution and expected value of the number of working components at time t in a consecutive k-out-of-n system under the condition that it is working at time t. We provide the exact distribution of the corresponding conditional random variable and compute its expected value for the system consisting of exchangeable dependent components. The results are also extended to any coherent system by the aid of system signature. Finally, we present illustrative and computational results for some systems having Lomax components.     

Condition-based maintenance policy for linear consecutive-k-out-of-n: F system

In the article, a condition-based maintenance policy is proposed for a linear consecutive-k-out-of-n: F system. The failure times of components are assumed to be independent and identically distributed. It is assumed that the component states in the system can be known at any time and the system failure can be detected immediately. The preventive maintenance action is based on the number of working components in minimal cut sets of the system. If there is at least one minimal cut set consisting of only one working component, the system is maintained preventively after a certain time interval. The proposed policy is compared with corrective maintenance and age-based maintenance policies. As an extended case, it is assumed that the component states can only be known by inspection, but the system failure can be detected immediately. In this case, the system is inspected periodically and is also maintained preventively based on the system state at inspection. Numerical examples are studied to evaluate the performance of the proposed policy and investigate the effects of cost parameters on the expected cost rate.     

Failure Data Analysis with Extended Weibull Distribution

A consecutive k-out-of-n: G system consists of n linearly ordered components functions if and only if at least k consecutive components function. In this article we investigate the consecutive k-out-of-n: G system in a setup of multicomponent stress-strength model. Under this setup, a system consists of n components functions if and only if there are at least k consecutive components survive a common random stress. We consider reliability and its estimation of such a system whenever there is a change and no change in strength. We provide minimum variance unbiased estimation of system reliability when the stress and strength distributions are exponential with unknown scale parameters. A nonparametric minimum variance unbiased estimator is also provided.     

On the mean residual life of a generalized k-out-of-n system

A generalized k-out-of-n system consists of N modules in which the i th module is composed of n_i components in parallel. The system failswhen at least f components in the whole system or at least k consecutive modules have failed. In this article, we obtain the mean residual life function of such a generalized k-out-of-n system under different conditions, namely, when the number of components in each module is equal or unequal and when the components of the system are independent or exchangeable.     

Reliability and Some Characteristics of Circular Consecutive-k-Within-m-Out-of-n:F System

A system can be classified with respect to the physical arrangement of its components and the functioning principle. A circular consecutive k-within-m-out-of-n:F system consists of n circularly ordered components and fails if and only if there are m consecutive components that include among them at least k failed components. A circular consecutive k-within-m-out-of-n:F system turns into circular consecutive k-out-of-n:F for m = k and k-out-of-n:F system for m = n. In this study, signature-based analysis of circular consecutive k-within-m-out-of-n:F system is performed. A new approximation to this system is provided based on maximum number of failed components and an illustrative example is given for different values of n, m, k to compare the approximate results with simulated and exact results.     

Conditional residual lifetimes of coherent systems under double monitoring

In this paper, we obtain a mixture representation for the reliability function of the conditional residual lifetime of a coherent system with n independent and identically distributed (i.i.d.) components under double monitoring. We suppose that at time t₁, j components have failed while at time t₂ the system is still alive. Based on these mixture representation, we then study stochastic comparisons of the conditional residual lifetimes of two coherent systems with independent and identical components.     

An Integral Bhattacharyya Type Bound for the Bayes Risk

In this article, some results are derived on stochastic comparisons of the residual and past lifetimes of an (n ? k + 1)-out-of-n system with dependent components. These findings generalize some recent results obtained on systems with independent components and provide some interesting results for a system with dependent components following an Archimedean copula. An illustrative example is provided.     

Generalized likelihood-ratio test of the number of components in finite mixture models

The number of components is an important feature in finite mixture models. Because of the irregularity of the parameter space, the log-likelihood-ratio statistic does not have a chi-square limit distribution. It is very difficult to find a test with a specified significance level, and this is especially true for testing k — 1 versus k components. Most of the existing work has concentrated on finding a comparable approximation to the limit distribution of the log-likelihood-ratio statistic. In this paper, we use a statistic similar to the usual log likelihood ratio, but its null distribution is asymptotically normal. A simulation study indicates that the method has good power at detecting extra components. We also discuss how to improve the power of the test, and some simulations are performed.     

Dynamic Reliability Evaluation of Consecutive-k-Within-m-Out-of-n:F System

A consecutive k-within-m-out-of-n:F system consists of n linearly ordered components and fails if and only if there are m consecutive components which include among them at least k failed components. This system model generalizes both consecutive k-out-of-n:F and k-out-of-n:F systems. In this article, we study the dynamic reliability properties of consecutive k-within-m-out-of-n:F system consisting of exchangeable dependent components. We also obtain some stochastic ordering results and use them to get simple approximation formulae for the survival function and mean time to failure of this system.     

Reliability of weighted k-out-of-n: G systems consisting of two types of components and a cold standby component

In this article, the influence of a cold standby component to the reliability of weighted k-out-of-n: G systems consisting of two different types of components is studied. Weighted k-out-of-n: G systems are generalization of k-out-of-n systems that has attracted substantial interest in reliability theory because of their various applications in engineering. A method based on residual lifetimes of mixed components is presented for computing reliability of weighted k-out-of-n: G systems with two types of components and a cold standby component. Reliability and mean time to failure of different structured systems have been computed. Moreover, obtained results are used for defining optimal system configurations that can minimize the overall system costs.     

Ordering New Conditional Residual Lifetimes of k-out-of-n Systems

This article introduces a new residual life of (n ? k + 1)-out-of-n systems consisting of n independent and identically distributed components, given that the total number of failures of components is not less than l at time t, and the system is still working. Some stochastic comparisons of residual lifetimes are conducted, and behaviors of DLR and ILR are given.     

Standby redundancies at component level versus system level in series system

Abstract

It is known that the redundancy at the component level is better than the system level for the case of active redundancy. However, few results are available for standby redundancy due to the complexity of convolution. This note stochastically compares allocations of standby redundancies in series systems with exponential components at the component level versus the system level in sense of the likelihood ratio ordering. The established results strengthen and extend some known ones in the literature.     

Mean Time to Failure of Weighted k-out-of-n: G Systems

The purpose of this article is to develop a Monte-Carlo simulation algorithm for computing mean time to failure (MTTF) of weighted-k-out-of-n:G and linear consecutive-weighted-k-out-of-n:G systems. Our algorithm is based on the use of appropriately defined stochastic process which represents the total weight of the system at time t. These stochastic processes are explicitly defined and used along with the ordered component lifetimes to simulate MTTF of the systems with weighted components.     

Optimization problems for consecutive-2-out-of-n:G system

Abstract

This paper considers the optimization problems for a consecutive-2-out-of-n:G system where n is considered to be fixed or random. When the number of components is constant, the optimal number of components and the optimal replacement time are discussed by minimizing the expected cost rates. Furthermore, we focus on the above discussions again when n is a random variable. We give an approximate value of MTTF and propose the preventive replacement policy, respectively.     

Estimation of system reliability

In this paper, we estimate the reliability of a system with k components. The system functions when at least s (1≤s≤k) components survive a common random stress. We assume that the strengths of these k components are subjected to a common stress which is independent of the strengths of these k components. If (X ₁,X ₂,…,X _k ) are strengths of k components subjected to a common stress (Y), then the reliability of the system or system reliability is given byR=P[Y<X _(k−s+1)] whereX _(k−s+1) is (k−s+1)-th order statistic of (X ₁,…,X _k ). We estimate R when (X ₁,…,X _k ) follow an absolutely continuous multivariate exponential (ACMVE) distribution of Hanagal (1993) which is the submodel of Block (1975) and Y follows an independent exponential distribution. We also obtain the asymptotic normal (AN) distribution of the proposed estimator.     

A note on the mean past and the mean residual life of a (n − k + 1)-out-of-n system under multi monitoring

In the study of the reliability of technical systems, k-out-of-n systems play an important role. In the present paper, we consider a (n − k + 1)-out-of-n system consisting of n identical components such that the lifetimes of components are independent and have a common distribution function F. It is assumed that the number of monitoring is l and the total number of failures of the components at time t _i is m _i , i = 1, . . . , l − 1. Also at time t _l (t ₁ < . . . < t _l ) the system have failed or the system is still working. Under these conditions, the mean past lifetime, the mean residual lifetime of system and their properties are investigated.     

Reliability Research of Dependent Failure Systems Using Copula

The computation of reliability characteristics of a system that consists of dependent components sometimes becomes difficult, especially when a specific type of dependence is not identified. In this paper, some systems with arbitrary dependent components are studied using copula. In the system, the components are dependent on each other and the dependent relations may be either linear or nonlinear correlation. The efficient formulas are presented to compute the reliability characteristics, such as reliability function, failure rate and meantime to failure of series, parallel and k-out-of-n systems. The reliability functions of dependant systems are compared with independent system. At last, the numerical examples are presented to illustrate the results obtained in this paper.     

Allocating Redundancies to k-out-of-n Systems with Independent and Heterogeneous Components

This paper studies the allocation of independent redundancies with a common life distribution to k-out-of-n systems of independent components with non identical life distributions. A sufficient condition is found for allocating more active redundancies to the weaker component to gain a larger lifetime for k-out-of-n systems, and assigning more standby redundancies to the weaker (stronger) components is proved to yield larger lifetime for series (parallel) systems in the sense of the increasing concave (convex) order. Also, the optimal policy is proved to be majorized by all other policies when the system’s components are stochastically ordered.     

Attainability of the Upper Bounds for the Mean Past Lifetime of Parallel System Components

Among reliability systems, one of the basic systems is a parallel system. In this article, we consider a parallel system consisting of n identical components with independent lifetimes having a common distribution function F. Under the condition that the system has failed by time t, with t being 100pth percentile of F(t = F ^?1(p), 0 < p < 1), we characterize the probability distributions based on the mean past lifetime of the components of the system. These distributions are described in the form of a specific shape on the left of t and arbitrary continuous function on the right tail.     

On the Percentile Residual Lifetime of Parallel Systems

In this paper, we consider a parallel system consisting of n components. Then, the percentile residual lifetime of the system given survival of at least n ? r + 1, r = 1, 2, …, n component(s) has been introduced, and some properties of this measure have been investigated. We show that the system accommodates decreasing percentile residual lifetime function, provided the components have increasing hazard rate functions. Different parallel systems have been compared with each other in terms of the introduced measure. Furthermore, behavior of the percentile residual lifetime of the system and the components have been compared in terms of some reliability notions. Also, a characterization result has been presented.