The Design of the Multivariate Synthetic Exponentially Weighted Moving Average Control Chart

A multivariate synthetic exponentially weighted moving average (MSEWMA) control chart is presented in this study. The MSEWMA control chart consists of a multivariate exponentially weighted moving average (MEWMA) control chart and a conforming run length control chart. The average run length of the MSEWMA control chart is obtained using a Markov chain approach. From the numerical comparisons, it is shown that the MSEWMA control chart is more efficient than the multivariate synthetic T ² control chart and the MEWMA control chart for detecting shifts in the process mean vector.     

The economic design of multivariate binomial EWMA VSSI control charts

Since multi-attribute control charts have received little attention compared with multivariate variable control charts, this research is concerned with developing a new methodology to employ the multivariate exponentially weighted moving average (MEWMA) charts for m-attribute binomial processes; the attributes being the number of nonconforming items. Moreover, since the variable sample size and sampling interval (VSSI) MEWMA charts detect small process mean shifts faster than the traditional MEWMA, an economic design of the VSSI MEWMA chart is proposed to obtain the optimum design parameters of the chart. The sample size, the sampling interval, and the warning/action limit coefficients are obtained using a genetic algorithm such that the expected total cost per hour is minimized. At the end, a sensitivity analysis has been carried out to investigate the effects of the cost and the model parameters on the solution of the economic design of the VSSI MEWMA chart.     

A Multivariate Adaptive Exponentially Weighted Moving Average Control Chart

A multivariate extension of the adaptive exponentially weighted moving average (AEWMA) control chart is proposed. The new multivariate scheme can detect small and large shifts in the process mean vector effectively. The proposed scheme can be viewed as a smooth combination of a multivariate exponentially weighted moving average (MEWMA) chart and a Shewhart χ²-chart. The optimal design of the proposed chart is given according to a pre-specified in-control average run length and two shift sizes; a small and large shift each measured in terms of the non centrality parameter. The signal resistance of the newly proposed multivariate chart is also given. Comparisons among the new chart, the MEWMA chart, and the combined Shewhart-MEWMA (S-MEWMA) chart in terms of the standard and worst-case average run length profiles are presented. In addition, the three charts are compared with respect to their worst-case signal resistance values. The proposed chart gives somewhat better worst-case ARL and signal resistance values than the competing charts. It also gives better standard ARL performance especially for moderate and large shifts. The effectiveness of our proposed chart is illustrated through an example with simulated data set.     

The Effect of Methods for Handling Missing Values on the Performance of the MEWMA Control Chart

This article is concerned with the effect of the methods for handling missing values in multivariate control charts. We discuss the complete case, mean substitution, regression, stochastic regression, and the expectation–maximization algorithm methods for handling missing values. Estimates of mean vector and variance–covariance matrix from the treated data set are used to build the multivariate exponentially weighted moving average (MEWMA) control chart. Based on a Monte Carlo simulation study, the performance of each of the five methods is investigated in terms of its ability to obtain the nominal in-control and out-of-control average run length (ARL). We consider three sample sizes, five levels of the percentage of missing values, and three types of variable numbers. Our simulation results show that imputation methods produce better performance than case deletion methods. The regression-based imputation methods have the best overall performance among all the competing methods.     

Parameter optimization for a modified MEWMA control chart based on a PSO algorithm

The standard multivariate exponentially weighted moving average (MEWMA) control chart with a constant smoothing parameter or diagonal matrix is based on the assumption that the samples obey standard normal distribution. With improvements in manufacturing quality and product complexity, there is always correlativity among quality characteristics, and samples will not always obey standard normal distribution. Considering the correlativity among quality characteristics, a new modified general MEWMA (GEWMA) control chart is proposed, and its performance is analyzed. Based on the Particle Swarm Optimization (PSO) algorithm, a smoothing matrix optimized under certain conditions is selected and applied to a sample analysis. As a result of the parameter combination chosen by PSO, the statistic function of the GEWMA control chart is better than that of the full matrix MEWMA (FEWMA) control chart.     

Optimal Statistical Design of a Multivariate EWMA Chart Based on ARL and MRL

Statistical design is applied to a multivariate exponentially weighted moving average (MEWMA) control chart. The chart parameters are control limit H and smoothing constant r. The choices of the parameters depend on the number of variables p and the size of the process mean shift δ. The MEWMA statistic is modeled as a Markov chain and the Markov chain approach is used to determine the properties of the chart. Although average run length has become a traditional measure of the performance of control schemes, some authors have suggested other measures, such as median and other percentiles of the run length distribution to explain run length properties of a control scheme. This will allow a thorough study of the performance of the control scheme. Consequently, conclusions based on these measures would provide a better and comprehensive understanding of a scheme. In this article, we present the performance of the MEWMA control chart as measured by the average run length and median run length. Graphs are given so that the chart parameters of an optimal MEWMA chart can be determined easily.     

Monitoring simple linear profiles using variable sample size schemes

ABSTRACT

Profile monitoring is one of the new research areas in statistical process control. Most of the control charts in this area are designed with fixed sampling rate which makes the control chart slow in detecting small to moderate shifts. In order to improve the performance of the conventional fixed control charts, adaptive features are proposed in which, one or more design parameters vary during the process. In this paper the variable sample size feature of EWMA₃ and MEWMA schemes are proposed for monitoring simple linear profiles. The EWMA₃ method is based on the combination of three exponentially weighted moving average (EWMA) charts for monitoring three parameters of a simple linear profile separately and the Multivariate EWMA (MEWMA) chart is based on the using a single chart to monitor the coefficients and variance of a general linear profile. Also a two-sided control chart is proposed for monitoring the standard deviation in the EWMA₃ method. The performance of the proposed charts is compared in terms of the average time to signal. Numerical examples show that using adaptive features increase the power of control charts in detecting the parameter shifts. Finally, the performance of the proposed variable sample size schemes is illustrated through a real case in the leather industry.     

An Empirical-Likelihood-Based Multivariate EWMA Control Scheme

Nonparametric control charts are useful in statistical process control (SPC) when there is a lack of or limited knowledge about the underlying process distribution, especially when the process measurement is multivariate. This article develops a new multivariate SPC methodology for monitoring location parameter based on adapting a well-known nonparametric method, empirical likelihood (EL), to on-line sequential monitoring. The weighted version of EL ratio test is used to formulate the charting statistic by incorporating the exponentially weighted moving average control (EWMA) scheme, which results in a nonparametric counterpart of the classical multivariate EWMA (MEWMA). Some theoretical and numerical studies show that benefiting from using EL, the proposed chart possesses some favorable features. First, it is a data-driven scheme and thus is more robust to various multivariate non-normal data than the MEWMA chart under the in-control (IC) situation. Second, it is transformation-invariant and avoids the estimation of covariance matrix from the historical data by studentizing internally, and hence its IC performance is less deteriorated when the number of reference sample is small. Third, in comparison with the existing approaches, it is more efficient in detecting small and moderate shifts for multivariate non-normal process.     

A multivariate exponentially weighted moving average control chart for monitoring process variability

This paper introduces a new multivariate exponentially weighted moving average (EWMA) control chart. The proposed control chart, called an EWMA V-chart, is designed to detect small changes in the variability of correlated multivariate quality characteristics. Through examples and simulations, it is demonstrated that the EWMA V-chart is superior to the |S|-chart in detecting small changes in process variability. Furthermore, a counterpart of the EWMA V-chart for monitoring process mean, called the EWMA M-chart is proposed. In detecting small changes in process variability, the combination of EWMA M-chart and EWMA V-chart is a better alternative to the combination of MEWMA control chart (Lowry et al. , 1992) and |S|-chart. Furthermore, the EWMA M- chart and V-chart can be plotted in one single figure. As for monitoring both process mean and process variability, the combined MEWMA and EWMA V-charts provide the best control procedure.     

The extended GWMA control chart

This study extends the generally weighted moving average (GWMA) control chart by imitating the double exponentially weighted moving average (DEWMA) technique. The proposed chart is called the double generally weighted moving average (DGWMA) control chart. Simulation is employed to evaluate the average run length characteristics of the GWMA, DEWMA and DGWMA control charts. An extensive comparison of these control charts reveals that the DGWMA control chart with time-varying control limits is more sensitive than the GWMA and the DEWMA control charts for detecting medium shifts in the mean of a process when the shifts are between 0.5 and 1.5 standard deviations. Additionally, the GWMA control chart performs better when the mean shifts are below the 0.5 standard deviation, and the DEWMA control performs better when the mean shifts are above the 1.5 standard deviation. The design of the DGWMA control chart is also discussed.     

Multivariate Synthetic |S| Control Chart with Variable Sampling Interval

A variable sampling interval (VSI) feature is introduced to the multivariate synthetic generalized sample variance |S| control chart. This multivariate synthetic control chart is a combination of the |S| sub-chart and the conforming run length sub-chart. The VSI feature enhances the performance of the multivariate synthetic control chart. The comparative results show that the VSI multivariate synthetic control chart performs better than other types of multivariate control charts for detecting shifts in the covariance matrix of a multivariate normally distributed process. An example is given to illustrate the operation of the VSI multivariate synthetic chart.     

Double sampling max chart

This study proposes a double sampling (DS) Max chart for monitoring shifts in the process mean and standard deviation. The design of the DS Max chart depends on five parameters, i.e. first and second sample sizes, warning limit at Stage 1, upper control limits at Stages 1 and 2. The optimization design of the DS Max chart is conducted using a genetic algorithm by minimizing the average run length. The comparison shows that the DS Max chart performs better than the existing charts in the literature. An example is provided to illustrate the application of the DS Max chart.     

Using the predictive distribution to determine control limits for the Bayesian MEWMA chart

Bayesian control charts have been proposed for monitoring multivariate processes with the multivariate exponentially weighted moving average (MEWMA) statistic. It has been suggested that we use limits based on the predictive distribution of the MEWMA statistic. This analysis, however is based on the erroneous result that the average run length (ARL) is a function of the exceedance probability, that is, the probability that the first point exceeds the control limit. We show how this result can be corrected and we discuss how the Bayesian MEWMA chart with limits based on the predictive distribution compares with other multivariate control chart procedures.     

Combined synthetic and |S| chart for monitoring process dispersion

This article proposes a multivariate control chart, the syn-|S| chart, which comprises a standard |S| subchart and a multivariate synthetic sample generalized variance |S| (synthetic |S|) subchart, for detecting shifts in the covariance matrix of a multivariate normally distributed process. A procedure for the optimal design of the syn-|S| chart by minimizing the average extra quadratic loss is provided. The syn-|S| chart has better overall performance compared to the synthetic |S| chart and the standard |S| chart, based on the zero-state and steady-state modes. An example is given to illustrate the operation of the synthetic |S| chart.     

Mixed multivariate EWMA-CUSUM control charts for an improved process monitoring

Multivariate exponential weighted moving average and cumulative sum charts are the most common memory type multivariate control charts. They make use of the present and past information to detect small shifts in the process parameter(s). In this article, we propose two new multivariate control charts using a mixed version of their design setups. The plotting statistics of the proposed charts are based on the cumulative sum of the multivariate exponentially weighted moving averages. The performances of these schemes are evaluated in terms of average run length. The proposals are compared with their existing counterparts, including HotellingT², MCUSUM, MEWMA, and MC1 charts. An application example is also presented for practical considerations using a real dataset.     

A weibull process failure mechanism for the economic design of mewma control charts

The design parameters of the multivariate exponentially weighted moving average (MEWMA) control chart may be chosen according to economic and/or statistical considerations. The economic model proposed for the design of the'MEWMA chart assumes a Markovian process failure mechanism following an exponential distribution. We'assess the sensitivity of the resulting economic design for the MEWMA to deviations from this assumption. In particular, the generalization, from an exponential to a Weibull distribution of process failure, is used to study the selection of MEWMA chart parameters given process cost and time information. We conclude that the quality of the resulting design (in terms of expected cost) is not substantially affected by mis-specification of the distribution of process failure.     

A new double sampling control chart for monitoring process mean using auxiliary information

Statistical quality control charts have been widely accepted as a potentially powerful process monitoring tool because of their excellent speed in tracking shifts in the underlying process parameter(s). In recent studies, auxiliary-information-based (AIB) control charts have shown superior run length performances than those constructed without using it. In this paper, a new double sampling (DS) control chart is constructed whose plotting-statistics requires information on the study variable and on any correlated auxiliary variable for efficiently monitoring the process mean, namely AIB DS chart. The AIB DS chart also encompasses the classical DS chart. We discuss in detail the construction, optimal design, run length profiles, and the performance evaluations of the proposed chart. It turns out that the AIB DS chart performs uniformly better than the DS chart when detecting different kinds of shifts in the process mean. It is also more sensitive than the classical synthetic and AIB synthetic charts when detecting a particular shift in the process mean. Moreover, with some realistic beliefs, the proposed chart outperforms the exponentially weighted moving average chart. An illustrative example is also presented to explain the working and implementation of the proposed chart.     

The Synthetic Mean Square Error Control Chart

A synthetic mean square error (MSE) control chart is presented in this study for monitoring the changes in the mean and standard deviation of a normally distributed process. The synthetic MSE control chart is a combination of the standard MSE control chart and the conforming run length (CRL) control chart. From the numerical comparisons, the synthetic MSE control chart is always more efficient than the standard MSE control chart in detecting shifts in the process mean and standard deviation. The synthetic MSE chart also performs better than the exponentially weighted moving average-semicircle (EWMA-SC) chart, except for some cases where the process mean shifts are small.     

On-line monitoring data quality of high-dimensional data streams

ABSTRACT

In recent years, effective monitoring of data quality has increasingly attracted attention of researchers in the area of statistical process control. Among the relevant research on this topic, none used multivariate methods to control the multidimensional data quality process, but instead relied on multiple univariate control charts. Based on a novel one-sided multivariate exponentially weighted moving average (MEWMA) chart, we propose a conditional false discovery rate-adjusted scheme to on-line monitor the data quality of high-dimensional data streams. With thousands of input data streams, the average run length loses its usefulness because one will likely have out-of-control signals at each time period. Hence, we first control the percentage of signals that are false alarms. Then, we compare the power of the proposed MEWMA scheme with that of two alternative methods. Compared with two competitors, numerical results show that the proposed MEWMA scheme has higher average power.     

Monitoring process mean using generally weighted moving average chart for exponentially distributed characteristics

In this article, we will present a control chart using normal transformation and generally weighted moving average (GWMA) statistic when the quality characteristic follows the exponential distribution. We will develop the necessary measures to monitor the mean of the process using GWMA statistic and analyze the performance using simulation. The average run lengths for monitoring process average are given for various process shifts. The performance of the proposed chart is examined and compared with the existing control chart. The proposed control chart is effective for the monitoring of small shifts in the mean process. The application of the proposed chart is illustrated with the help of simulated data.