Mixture inverse Gaussian for unobserved heterogeneity in the autoregressive conditional duration model

In this paper, we assume that the duration of a process has two different intrinsic components or phases which are independent. The first is the time it takes for a trade to be initiated in the market (for example, the time during which agents obtain knowledge about the market in which they are operating and accumulate information, which is coherent with Brownian motion) and the second is the subsequent time required for the trade to develop into a complete duration. Of course, if the first time is zero then the trade is initiated immediately and no initial knowledge is required. If we assume a specific compound Bernoulli distribution for the first time and an inverse Gaussian distribution for the second, the resulting convolution model has a mixture of an inverse Gaussian distribution with its reciprocal, which allows us to specify and test the unobserved heterogeneity in the autoregressive conditional duration (ACD) model.

Our proposals make it possible not only to capture various density shapes of the durations but also easily to accommodate the behaviour of the tail of the distribution and the non monotonic hazard function. The proposed model is easy to fit and characterizes the behaviour of the conditional durations reasonably well in terms of statistical criteria based on point and density forecasts.     

Defective models induced by gamma frailty term for survival data with cured fraction

In this paper, we propose a defective model induced by a frailty term for modeling the proportion of cured. Unlike most of the cure rate models, defective models have advantage of modeling the cure rate without adding any extra parameter in model. The introduction of an unobserved heterogeneity among individuals has bring advantages for the estimated model. The influence of unobserved covariates is incorporated using a proportional hazard model. The frailty term assumed to follow a gamma distribution is introduced on the hazard rate to control the unobservable heterogeneity of the patients. We assume that the baseline distribution follows a Gompertz and inverse Gaussian defective distributions. Thus we propose and discuss two defective distributions: the defective gamma-Gompertz and gamma-inverse Gaussian regression models. Simulation studies are performed to verify the asymptotic properties of the maximum likelihood estimator. Lastly, in order to illustrate the proposed model, we present three applications in real data sets, in which one of them we are using for the first time, related to a study about breast cancer in the A.C.Camargo Cancer Center, São Paulo, Brazil.     

Analysis of Bivariate Survival Data using Shared Inverse Gaussian Frailty Model

In this article, we consider shared frailty model with inverse Gaussian distribution as frailty distribution and log-logistic distribution (LLD) as baseline distribution for bivariate survival times. We fit this model to three real-life bivariate survival data sets. The problem of analyzing and estimating parameters of shared inverse Gaussian frailty is the interest of this article and then compare the results with shared gamma frailty model under the same baseline for considered three data sets. Data are analyzed using Bayesian approach to the analysis of clustered survival data in which there is a dependence of failure time observations within the same group. The variance component estimation provides the estimated dispersion of the random effects. We carried out a test for frailty (or heterogeneity) using Bayes factor. Model comparison is made using information criteria and Bayes factor. We observed that the shared inverse Gaussian frailty model with LLD as baseline is the better fit for all three bivariate data sets.     

非参数随机条件持续期模型及其迭代算法

 随机条件持续期（SCD）模型能有效刻画超高频时间序列中持续期的变化,但该模型假定期望持续期生成机制固定,且模型参数估计存在一定的困难。文章在不假定条件均值形式和冲击项分布的基础上结合核估计方法提出了非参数SCD模型及其迭代求解方法。然后,基于TEACD(1,1)模型生成的模拟数据,将非参数SCD模型与用卡尔漫滤波进行伪似然估计的参数SCD模型和用Gibbs抽样进行马尔科夫蒙特卡罗估计的参数SCD模型的拟合效果进行比较,实证表明在大样本条件下非参数SCD模型的拟合效果与用MCMC估计的参数SCD模型的拟合结果相差不大,但明显优于用QML估计的参数SCD模型的拟合结果,且非参数SCD模型能为参数SCD模型的参数设定提供参考。     

Estimation in a model for a semi-Markov process with covariates under right-censoring

A semi-Markov model with covariates is proposed for a multi-state process with a finite number of states such that the transition probabilities between the states and the distribution functions of the duration times between the occurrence of two states depend on a discrete covariate. The hazard rates for the time elapsed between two successive states depend on the covariate through a proportional hazards model involving a set of regression parameters, while the transition probabilities depend on the covariate in an unspecified way. We propose estimators for these parameters and for the cumulative hazard functions of the sojourn times. A difficulty comes from the fact that when a sojourn time in a state is right-censored, the next state is unknown. We prove that our estimators are consistent and asymptotically Gaussian under the model constraints.     

Critical time distribution of the mixture inverse Gaussian hazard rate

We have examined the maximum likelihood estimation of the critical time of the hazard rate for the mixture inverse Gaussian (MIG) model. We have obtained the limiting distribution, and showed the consistency of the estimator. Received: September 1, 1999; revised version: August 21, 2000     

Properties and applications of the Poisson-reciprocal inverse Gaussian distribution

The barely known continuous reciprocal inverse Gaussian distribution is used in this paper to introduce the Poisson-reciprocal inverse Gaussian discrete distribution. Several of its most relevant statistical properties are examined, some of them directly inherited from the reciprocal of the inverse Gaussian distribution. Furthermore, a mixed Poisson regression model that uses the reciprocal inverse Gaussian as mixing distribution is presented. Parameters estimation in this regression model is performed via an EM type algorithm. In light of the numerical results displayed in the paper, the distributions introduced in this work are competitive with the classical negative binomial and Poisson-inverse Gaussian distributions.     

Marshall–Olkin q-Weibull distribution and max–min processes

In this paper, we introduce a new probability model known as Marshall–Olkin q-Weibull distribution. Various properties of the distribution and hazard rate functions are considered. The distribution is applied to model a biostatistical data. The corresponding time series models are developed to illustrate its application in times series modeling. We also develop different types of autoregressive processes with minification structure and max–min structure which can be applied to a rich variety of contexts in real life. Sample path properties are examined and generalization to higher orders are also made. The model is applied to a time series data on daily discharge of Neyyar river in Kerala, India.     

Shared frailty models based on reversed hazard rate for modified inverse Weibull distribution as baseline distribution

The unknown or unobservable risk factors in the survival analysis cause heterogeneity between individuals. Frailty models are used in the survival analysis to account for the unobserved heterogeneity in individual risks to disease and death. To analyze the bivariate data on related survival times, the shared frailty models were suggested. The most common shared frailty model is a model in which frailty act multiplicatively on the hazard function. In this paper, we introduce the shared gamma frailty model and the inverse Gaussian frailty model with the reversed hazard rate. We introduce the Bayesian estimation procedure using Markov chain Monte Carlo (MCMC) technique to estimate the parameters involved in the model. We present a simulation study to compare the true values of the parameters with the estimated values. We also apply the proposed models to the Australian twin data set and a better model is suggested.     

Multivariate inverse Gaussian distribution as a limit of multivariate waiting time distributions

Multivariate inverse Gaussian distribution proposed by Minami [2003. A multivariate extension of inverse Gaussian distribution derived from inverse relationship. Commun. Statist. Theory Methods 32(12), 2285–2304] was derived through multivariate inverse relationship with multivariate Gaussian distributions and characterized as the distribution of the location at a certain stopping time of a multivariate Brownian motion. In this paper, we show that the multivariate inverse Gaussian distribution is also a limiting distribution of multivariate Lagrange distributions, which is a family of waiting time distributions, under certain conditions.     

Estimating the minimum and maximum location parameters for two ig-exponential scale mixtures

Suppose that we have two components, each having a two-parameter exponential distribution. Suppose further that these components are conditionally independent, sharing a common random hazard rate and possessing unequal, fixed, unknown location parameters. We develop estimators for the minimum and maximum of these location parameters when the random hazard rate has an inverse Gaussian distribution. Performance comparisons are made among the proposed estimators. Maximum likelihood estimators are shown to be inadmissible.     

Inhomogeneous Dependence Modeling with Time-Varying Copulae

Measuring dependence in multivariate time series is tantamount to modeling its dynamic structure in space and time. In risk management, the nonnormal behavior of most financial time series calls for non-Gaussian dependences. The correct modeling of non-Gaussian dependences is, therefore, a key issue in the analysis of multivariate time series. In this article we use copula functions with adaptively estimated time-varying parameters for modeling the distribution of returns. Furthermore, we apply copulae to the estimation of Value-at-Risk of portfolios and show their better performance over the RiskMetrics approach.     

A Multivariate Extension of Inverse Gaussian Distribution Derived from Inverse Relationship

Abstract

We propose a new multivariate extension of the inverse Gaussian distribution derived from a certain multivariate inverse relationship. First we define a multivariate extension of the inverse relationship between two sets of multivariate distributions, then define a reduced inverse relationship between two multivariate distributions. We derive the multivariate continuous distribution that has the reduced multivariate inverse relationship with a multivariate normal distribution and call it a multivariate inverse Gaussian distribution. This distribution is also characterized as the distribution of the location of a multivariate Brownian motion at some stopping time. The marginal distribution in one direction is the inverse Gaussian distribution, and the conditional distribution in the space perpendicular to this direction is a multivariate normal distribution. Mean, variance, and higher order cumulants are derived from the multivariate inverse relationship with a multivariate normal distribution. Other properties such as reproductivity and infinite divisibility are also given.     

Using quantile regression for duration analysis

Summary Quantile regression methods are emerging as a popular technique in econometrics and biometrics for exploring the distribution of duration data. This paper discusses quantile regression for duration analysis allowing for a flexible specification of the functional relationship and of the error distribution. Censored quantile regression addresses the issue of right censoring of the response variable which is common in duration analysis. We compare quantile regression to standard duration models. Quantile regression does not impose a proportional effect of the covariates on the hazard over the duration time. However, the method cannot take account of time-varying covariates and it has not been extended so far to allow for unobserved heterogeneity and competing risks. We also discuss how hazard rates can be estimated using quantile regression methods. This paper benefitted from the helpful comments by an anonymous referee. Due to space constraints, we had to omit the details of the empirical application. These can be found in the long version of this paper, Fitzenberger and Wilke (2005). We gratefully acknowledge financial support by the German Research Foundation (DFG) through the research project ‘Microeconometric modelling of unemployment durations under consideration of the macroeconomic situation’. Thanks are due to Xuan Zhang for excellent research assistance. All errors are our sole responsibility.     

Poisson-mixed Inverse Gaussian Regression Model and Its Application

In this article, we have developed a Poisson-mixed inverse Gaussian (PMIG) distribution. The mixed inverse Gaussian distribution is a mixture of the inverse Gaussian distribution and its length-biased counterpart. A PMIG regression model is developed and the maximum likelihood estimation of the parameters is studied. A dataset dealing with the number of hospital stays among the elderly population is analyzed by using the PMIG and the PIG (Poisson-inverse Gaussian) regression models and it has been shown that the PMIG model fits the data better than the PIG model.     

Additive Outlier Detection and Estimation for the Logarithmic Autoregressive Conditional Duration Model

This study investigates the influences of additive outliers on financial durations. An outlier test statistic and an outlier detection procedure are proposed to detect and estimate outlier effects for the logarithmic Autoregressive Conditional Duration (Log-ACD) model. The proposed test statistic has an exact sampling distribution and performs very well, in terms of size and power, in a series of Monte Carlo simulations. Furthermore, the test statistic is robust to several alternative distribution assumptions. An empirical application shows that parameter estimates without considering outliers tend to be biased.     

Inverse gaussian accelerated test models based on cumulative damage

The failure of a system under environmental stress often can be described by an accelerated test model which incorporates the environmental variable L. Here, the failure of such a system at environmental level L is modeled as the first passage of accumulated damage to a critical threshold value. Assuming a discrete additive damage model leads to a Birnbaum–Saunders-type distribution for the failure time which can be closely approximated by an inverse Gaussian-type model. However, if a continuous damage model based on a Gaussian process is assumed, a more general family of inverse Gaussian accelerated test models is obtained. Three sets of failure data are discussed to illustrate the usefulness of this general family.     

Generalized normal ARMA model applied to the areas of economy,hydrology, and public policy

The main purpose of this article is the presentation of a new class of time series models which is the merge output of the generalized normal distribution with ideas from the GARMA model. Symmetrically, tails that may be lighter or heavier than the Gaussian distribution, and Gaussian and Laplace distributions as special cases, are the main advantages of the use of generalized normal distribution. The proposed model is called generalized normal autoregressive moving average (GN-ARMA). We exemplify the application of the proposed model adjusting it to the three time series, which are from the areas of economy, hydrology, and public policy.     

Exponentiated Weibull regression for time-to-event data

The Weibull, log-logistic and log-normal distributions are extensively used to model time-to-event data. The Weibull family accommodates only monotone hazard rates, whereas the log-logistic and log-normal are widely used to model unimodal hazard functions. The increasing availability of lifetime data with a wide range of characteristics motivate us to develop more flexible models that accommodate both monotone and nonmonotone hazard functions. One such model is the exponentiated Weibull distribution which not only accommodates monotone hazard functions but also allows for unimodal and bathtub shape hazard rates. This distribution has demonstrated considerable potential in univariate analysis of time-to-event data. However, the primary focus of many studies is rather on understanding the relationship between the time to the occurrence of an event and one or more covariates. This leads to a consideration of regression models that can be formulated in different ways in survival analysis. One such strategy involves formulating models for the accelerated failure time family of distributions. The most commonly used distributions serving this purpose are the Weibull, log-logistic and log-normal distributions. In this study, we show that the exponentiated Weibull distribution is closed under the accelerated failure time family. We then formulate a regression model based on the exponentiated Weibull distribution, and develop large sample theory for statistical inference. We also describe a Bayesian approach for inference. Two comparative studies based on real and simulated data sets reveal that the exponentiated Weibull regression can be valuable in adequately describing different types of time-to-event data.     

Modelling stochastic volatility using generalized t distribution

In modelling financial return time series and time-varying volatility, the Gaussian and the Student-t distributions are widely used in stochastic volatility (SV) models. However, other distributions such as the Laplace distribution and generalized error distribution (GED) are also common in SV modelling. Therefore, this paper proposes the use of the generalized t (GT) distribution whose special cases are the Gaussian distribution, Student-t distribution, Laplace distribution and GED. Since the GT distribution is a member of the scale mixture of uniform (SMU) family of distribution, we handle the GT distribution via its SMU representation. We show this SMU form can substantially simplify the Gibbs sampler for Bayesian simulation-based computation and can provide a mean of identifying outliers. In an empirical study, we adopt a GT–SV model to fit the daily return of the exchange rate of Australian dollar to three other currencies and use the exchange rate to US dollar as a covariate. Model implementation relies on Bayesian Markov chain Monte Carlo algorithms using the WinBUGS package.