On the exact distribution of the likelihood ratio criterion for testing

The exact null distribution of the likelihood ratio criter- 2 ion for testing the hypothesis H: y = y~; z = a I, a unknown and UQ a given known vector against the alternative A =f H in a p-vari- ate normal population N (y,z) has been derived in the form of Meijer's G-function using mellin integral transform and also in a chisquare series form. Asymptotic behavior of the distribution of -2 log L has also been discussed. Percentage points for p=2(l)10for various level of significance and various degrees of freedom have been computed, but only selected tables have been presented in this paper.     

A fitted test for the behrens-fisher problem

In 1975, Lee and Gurland proposed a solution to the Behrens-Fisher problem. It had excellent control of size and power and was relatively simple to use. However it requires extensive special tables. This article proposes a modification of this approach. It replaces the tables with easily computed functions of the sample sizes and a standard t table. Control of size and power are equivalent to that obtained by Lee and Gurland. Furthermore, the test is also compared with the Welch's approximate t test and shows better control of size, with similar power curves when sample sizes are at least four from each of the two normal populations.     

Bayesian selection of log-linear models

A general methodology is presented for finding suitable Poisson log-linear models with applications to multiway contingency tables. Mixtures of multivariate normal distributions are used to model prior opinion when a subset of the regression vector is believed to be nonzero. This prior distribution is studied for two- and three-way contingency tables, in which the regression coefficients are interpretable in terms of odds ratios in the table. Efficient and accurate schemes are proposed for calculating the posterior model probabilities. The methods are illustrated for a large number of two-way simulated tables and for two three-way tables. These methods appear to be useful in selecting the best log-linear model and in estimating parameters of interest that reflect uncertainty in the true model.     

RELAXING ASSUMPTIONS IN THE ONE SAMPLE t-TEST

This paper reviews what is currently known about the behaviour of the t-statistic when one is no longer sampling from a normal distribution. Suppose Y is a batch of data on which the t-test is performed. Briefly then, heavy-tailed components of Y give a light-tailed t , positive correlation among Y gives a heavy-tailed t, and positively skewed components of Y give a negatively skewed t. The emphasis is on understanding why one gets this type of behaviour, although some numerical tables are presented to illustrate the conclusions.     

One-sided normal prediction intervals and sample sizes for a third-stage sample

One-sided two-stage prediction intervals for a normal population are extended to a third sampling stage. Procedures and tables are given for two situations. In the first situation, methods for obtaining such intervals are presented, and tables for calculating such prediction intervals are provided. In the second situation, a two-stage prediction interval has been applied, and a third stage is now required. Sample sizes are given for the third stage.     

A Simpler Approximation for Areas under the Standard Normal Curve

A simple approximation for areas under the standard normal curve is presented that is suitable for use when tables and/or calculators are not available or not permitted.     

Construction and selection of quick switching double-sampling system: sample size tightening

A new sampling inspection system involving normal and tightened plans is presented. Performance measures are developed. The average sample number of the newly developed system is compared with those of existing plans. Procedures are indicated an tables are constructed for designing the system indexed by various combinations of parameters.     

Sample size determination for 2k-r experiments with a binomial response

This paper provides closed form expressions for the sample size for two-level factorial experiments when the response is the number of defectives. The sample sizes are obtained by approximating the two-sided test for no effect through tests for the mean of a normal distribution, and borrowing the classical sample size solution for that problem. The proposals are appraised relative to the exact sample sizes computed numerically, without appealing to any approximation to the binomial distribution, and the use of the sample size tables provided is illustrated through an example.     

A p-value for testing the equivalence of the variances of a bivariate normal distribution

A p-value is developed for testing the equivalence of the variances of a bivariate normal distribution. The unknown correlation coefficient is a nuisance parameter in the problem. If the correlation is known, the proposed p-value provides an exact test. For large samples, the p-value can be computed by replacing the unknown correlation by the sample correlation, and the resulting test is quite satisfactory. For small samples, it is proposed to compute the p-value by replacing the unknown correlation by a scalar multiple of the sample correlation. However, a single scalar is not satisfactory, and it is proposed to use different scalars depending on the magnitude of the sample correlation coefficient. In order to implement this approach, tables are obtained providing sub-intervals for the sample correlation coefficient, and the scalars to be used if the sample correlation coefficient belongs to a particular sub-interval. Once such tables are available, the proposed p-value is quite easy to compute since it has an explicit analytic expression. Numerical results on the type I error probability and power are reported on the performance of such a test, and the proposed p-value test is also compared to another test based on a rejection region. The results are illustrated with two examples: an example dealing with the comparability of two measuring devices, and an example dealing with the assessment of bioequivalence.     

Modified cramer-von mises and anderson-darling tests for weibull distributions with unknown location and scale parameters

The standard Cramer-von Mises and Anderson-Darling goodness-of-fit tests require continuous underlying distributions with known parameters. In this paper, tables of critical values are generated for both tests for Weibull distributions with unknown location and scale parameters and known shape parameters. The powers of the Cramer-von Mises, Anderson-Darling, Kolmogorov-Smirnov, and Chi-Square tests for this situation are investigated. The Cramer-von Mises test has most power when the shape is 1.0 and the Anderson-Darling test has most power when the shape is 3.5. Finally, a relation between critical value and inverse shape parameter is presented.     

Exact percentage points for the Kolmogorov test on truncated versions of known continuous distributions with unknown truncation parameters

In this paper we deal with Kolmogorov-Smirnov testson uniformity with completely or partly unknown limits. Tables of exact percentage points are presented or referred using the wellknown determinant formula given by Steck (1971). It is shown that these tables also give the percentage points for the analogous statistics of the test on truncated versions of known continuous distributions with completely or partly unknown truncation limits. We will give some examples of these applications. Among these are the tests on exponentiality and on Pareto distribution with known shape parameter and unknown lower terminal.     

Tables for the Friedman rank test

This note presents tables for Friedman's test for two-way analysis of variance by ranks. These tables are more accurate than those that are presented in the literature. After intensive simulations, we have found for particular critical values some discrepancies with tables published earlier. The tables are also more extensive than those previously available.     

Evaluation of missing data mechanisms in two and three dimensional incomplete tables

The analysis of incomplete contingency tables is a practical and an interesting problem. In this paper, we provide characterizations for the various missing mechanisms of a variable in terms of response and non-response odds for two and three dimensional incomplete tables. Log-linear parametrization and some distinctive properties of the missing data models for the above tables are discussed. All possible cases in which data on one, two or all variables may be missing are considered. We study the missingness of each variable in a model, which is more insightful for analyzing cross-classified data than the missingness of the outcome vector. For sensitivity analysis of the incomplete tables, we propose easily verifiable procedures to evaluate the missing at random (MAR), missing completely at random (MCAR) and not missing at random (NMAR) assumptions of the missing data models. These methods depend only on joint and marginal odds computed from fully and partially observed counts in the tables, respectively. Finally, some real-life datasets are analyzed to illustrate our results, which are confirmed based on simulation studies.     

Mathematical forms of the distribution of the product of two normal variables

This paper finds the mathematical forms of the distribution of the product where x and x follow a bivariate normal distribution In this paper the distribution when PT0 is expressed as an integral, a new, fundamental result. From this general form, six different cases can be distinguished depending on what is known about the parameters and p. The special cases are Aroian $year:1959 and (6) Additionally, we prove that if and as the distribution of the product approaches the Type III distribution. When p=0# Aroian $year:1959 and Aroian and Meeker $year:1977, give tables for various values of 6., 6 . The results in this paper will be used to provide brief tables for p^O in a separate paper     

Bayesian inference for contingency tables with given marginals

Summary In this paper we introduce a class of prior distributions for contingency tables with given marginals. We are interested in the structrre of concordance/discordance of such tables. There is actually a minor limitation in that the marginals are required to assume only rational values. We do argue, though, that this is not a serious drawback for all applicatory purposes. The posterior and predictive distributions given anM-sample are computed. Examples of Bayesian estimates of some classical indices of concordance are also given. Moreover, we show how to use simulation in order to overcome some difficulties which arise in the computation of the posterior distribution.     

Diffuse difference triangle sets

A particular kind of difference triangle sets (DTSs) called diffuse DTS (DDTS) are considered. Their combinatorial structure is underlying the construction of all known types of self-orthogonal diffuse codes. A number of constructions of DDTS are described, and lower and upper bounds on the maximal element of an optimal DDTS are given. The asymptotic behaviour of the maximal element is studied. Finally, tables of DDTS and of their minimal possible maximal elements are presented.     

Selecting all treatments better than a control using existing tables

In this paper subset selection procedures for selecting all treatment populations with means larger than a control population are proposed. The treatments and control are assumed to have a multivariate normal distribution. Various covariance structures are considered. All of the proposed procedures are easily implemented using existing tables of the multivariate normal and multivariate t distributions. Some other procedures which have been proposed require extensive and unavailable tables for their implementation     

A revised simplex algorithm for the absolute deviation curve fitting problem

The statistical properties of quasi-ranges in small samples from a gamma density are the objects of study in this paper.The methods of computing the "Coefficient MatrixnA(j,k), which plays a major role for computing moments and quantiles from such a density using high speed digital computers, are presented. Limited tables of central and non-central moments as well as tables of quantile values, are given. More extensive tables can be easily constructed by using the methods described here when the need arises. Also, a table of values for kurtosis and skewness is presented.     

A bivariate noncentral T-disttrtoution with applications

The particular bivariate noncentral t-distribution associated with two univariate noncentral t variates having a correlation coefficient of one is considered. Some applications and properties are presented together with tables in the same form as Johnson and Welch's tables for a univariate noncentral t-distribution.     

ASN-minimax double sampling plans for variables

X be a continuous quality characteristic, with one-sided lower specification limit, having either normal distribution with known σ or exponential distribution. We report on an algorithm allowing the calculation of the so-called ASN-Minimax plan. This plan has minimal maximal average sample size among all double sampling plans for variables that obey the classical two-points-condition on the operating characteristic. We give examples and tables of the ASN-Minimax plans in the normal as well as in the exponential case. Received: March 20, 2000; revised version: January 22, 2001