An adaptive multivariate CUSUM control chart for signaling a range of location shifts

ABSTRACT

In this work, we proposed an adaptive multivariate cumulative sum (CUSUM) statistical process control chart for signaling a range of location shifts. This method was based on the multivariate CUSUM control chart proposed by Pignatiello and Runger (1990 Pignatiello, J.J., Runger, G.C. (1990). Comparisons of multivariate CUSUM charts. J. Qual. Technol. 22(3):173–186.[Taylor & Francis Online], [Web of Science ®] , [Google Scholar]), but we adopted the adaptive approach similar to that discussed by Dai et al. (2011 Dai, Y., Luo, Y., Li, Z., Wang, Z. (2011). A new adaptive CUSUM control chart for detecting the multivariate process mean. Qual. Reliab. Eng. Int. 27(7):877–884.[Crossref], [Web of Science ®] , [Google Scholar]), which was based on a different CUSUM method introduced by Crosier (1988 Crosier, R.B. (1988). Multivariate generalizations of cumulative sum quality-control schemes. Technometrics 30(3):291–303.[Taylor & Francis Online], [Web of Science ®] , [Google Scholar]). The reference value in this proposed procedure was changed adaptively in each run, with the current mean shift estimated by exponentially weighted moving average (EWMA) statistic. By specifying the minimal magnitude of the mean shift, our proposed control chart achieved a good overall performance for detecting a range of shifts rather than a single value. We compared our adaptive multivariate CUSUM method with that of Dai et al. (2001 Dai, Y., Luo, Y., Li, Z., Wang, Z. (2011). A new adaptive CUSUM control chart for detecting the multivariate process mean. Qual. Reliab. Eng. Int. 27(7):877–884.[Crossref], [Web of Science ®] , [Google Scholar]) and the non adaptive versions of these two methods, by evaluating both the steady state and zero state average run length (ARL) values. The detection efficiency of our method showed improvements over the comparative methods when the location shift is unknown but falls within an expected range.     

Fast Initial Response Features for Poisson GWMA Control Charts

The Poisson GWMA (PGWMA) control chart is an extension model of Poisson EWMA chart. It is substantially sensitive to small process shifts for monitoring Poisson observations. Recently, some approaches have been proposed to modify EWMA charts with fast initial response (FIR) features. In this article, we employ these approaches in PGWMA charts and introduce a novel chart called Poisson double GWMA (PDGWMA) chart for comparison. Using simulation, various control schemes are designed and their average run lengths (ARLs) are computer and compared. It is shown that the PDGWMA chart is the first choice in detecting small shifts especially when the shifts are downward, and the PGWMA chart with adjusted time-varying control limits performs excellently in detecting great process shifts during the initial stage.     

Attribute Control Chart for Multivariate Poisson Distribution

In this study, a control chart is constructed to monitor multivariate Poisson count data, called the MP chart. The control limits of the MP chart are developed by an exact probability method based on the sum of defects or non conformities for each quality characteristic. Numerical examples are used to illustrate the MP chart. The MP chart is evaluated by the average run length (ARL) in simulation. The result indicates that the MP chart is more appropriate than the Shewhart-type control chart when the correlation between variables exists.     

Poisson GWMA Control Chart

A generally weighted moving average (GWMA) control chart for monitoring Poisson observations is introduced. Using simulation, its average run lengths and standard deviations of run lengths are compared with those of other control charts for Poisson data. It is shown that the Poisson GWMA chart outperforms other control charts, especially when the process shift is small.     

Progressive Variance Control Charts for Monitoring Process Dispersion

In a process, the deviation from location or scale parameters affects the quality of the process and waste resources. So it is essential to monitor such processes for possible changes due to any assignable causes. Control charts are the most famous tool used to meet this intention. It is useless to monitor process location until the assurance that process dispersion is in-control. This study proposes some new two-sided memory control charts named as progressive variance (PV) control charts which are based on sample variance to monitor changes in process dispersion assuming normality of quality characteristic to be monitored. Simulation studies are made, and an example is discussed to evaluate the performance of the proposed charts. The comparison of the proposed chart is made with exponentially weighted moving average- and cumulative sum-type charts for process dispersion. The study shows that performance of the proposed charts are uniformly better than its competitors for detecting positive shifts while for detecting negative shift in the variance their performance is better for small shifts and reasonably good for moderated shifts.     

CUSUM Control Charts for Multivariate Poisson Distribution

A cumulative sum control chart for multivariate Poisson distribution (MP-CUSUM) is proposed. The MP-CUSUM chart is constructed based on log-likelihood ratios with in-control parameters, Θ₀, and shifts to be detected quickly, Θ₁. The average run length (ARL) values are obtained using a Markov Chain-based method. Numerical experiments show that the MP-CUSUM chart is effective in detecting parameter shifts in terms of ARL. The MP-CUSUM chart with smaller Θ₁ is more sensitive than that with greater Θ₁ to smaller shifts, but more insensitive to greater shifts. A comparison shows that the proposed MP-CUSUM chart outperforms an existing MP chart.     

One-sided EWMA control charts for monitoring Poisson processes with varying sample sizes

ABSTRACT

Recently considerable research has been devoted to monitoring increases of incidence rate of adverse rare events. This paper extends some one-sided upper exponentially weighted moving average (EWMA) control charts from monitoring normal means to monitoring Poisson rate when sample sizes are varying over time. The approximated average run length bounds are derived for these EWMA-type charts and compared with the EWMA chart previously studied. Extensive simulations have been conducted to compare the performance of these EWMA-type charts. An illustrative example is given.     

Effect of Inspection Error on Out-of-Control Average Run Length of CUSUM Charts

The cumulative sum (CUSUM) chart is commonly used for detecting small or moderate shifts in the fraction of defective manufactured items. However, its construction relies on the error-free inspection assumption, which can seldom be met in practice. In this article, we discuss the construction of an upward CUSUM chart in the presence of inspection error, study the effects of inspection error on the out-of-control ARL of the CUSUM chart, and present a formula for determining the sampling size that compensates for the effect of inspection error on the out-of-control ARL.     

Exponentially weighted moving average charts for correlated multivariate Poisson processes

In this article, we study exponentially weighted moving average (EWMA) control schemes to monitor the multivariate Poisson distribution with a general covariance structure, so that the practitioner can simultaneously monitor multiple correlated attribute processes more effectively. The statistical performance of the charts is assessed in terms of the run length properties and compared against other mainstream attribute control schemes. The application of the proposed methods to real-life and simulated datasets is demonstrated.     

Sample Size Determination for Comparing Two Poisson Rates with Underreported Counts

The optimal sample size comparing two Poisson rates when the counts are underreported is investigated. We consider two sampling scenarios. We first consider the case where only underreported data will be sampled and rely on informative prior distributions to obtain posterior identifiability. We also consider the case where an expensive infallible search method and a fallible method are available. An interval based sample size criterion is used in both sampling scenarios. Since the posterior distributions of the two rates are functions of confluent hypergeometric and hypergeometric functions simulation based methods are necessary to perform the sample size determination scheme.     

Run rules based phase II c and np charts when process parameters are unknown

Abstract

The performance of attributes control charts is usually evaluated under the assumption of known process parameters (i.e., the nominal proportion of non conforming units or the nominal average number of nonconformities). However, in practice, these process parameters are rarely known and have to be estimated from an in-control Phase I data set. The major contributions of this paper are (a) the derivation of the run length properties of the Run Rules Phase II c and np charts with estimated parameters, particularly focusing on the ARL, SDRL, and 0.05, 0.5, and 0.95 quantiles of the run length distribution; (b) the investigation of the number m of Phase I samples that is needed by these charts in order to obtain similar in-control ARLs to the known parameters case; and (c) the proposition of new specific chart parameters that allow these charts to have approximately the same in-control ARLs as the ones obtained in the known parameters case.     

Monitoring Nonlinear Profiles with Random Effects by Nonparametric Regression

The monitoring of process/product profiles is presently a growing and promising area of research in statistical process control. This study is aimed at developing monitoring schemes for nonlinear profiles with random effects. We utilize the technique of principal components analysis to analyze the covariance structure of the profiles and propose monitoring schemes based on principal component (PC) scores. The number of the PC scores used in constructing control charts is crucial to the detecting power. In the Phase I analysis of historical data, due to the dependency of the PC-scores, we adopt the usual Hotelling T ² chart to check the stability. For Phase II monitoring, we study individual PC-score control charts, a combined chart scheme that combines all the PC-score charts, and a T ² chart. Although an individual PC-score chart may be perfect for monitoring a particular mode of variation, a chart that can detect general shifts, such as the T ² chart and the combined chart scheme, is more feasible in practice. The performances of the schemes under study are evaluated in terms of the average run length.     

An Examination of the Robustness to Non Normality of the EWMA Control Charts for the Dispersion

ABSTRACT

The EWMA control chart is used to detect small shifts in a process. It has been shown that, for certain values of the smoothing parameter, the EWMA chart for the mean is robust to non normality. In this article, we examine the case of non normality in the EWMA charts for the dispersion. It is shown that we can have an EWMA chart for dispersion robust to non normality when non normality is not extreme.     

Economic-Statistical Design of EWMA Control Charts Based on Taguchi's Loss Function

This paper proposes an economic-statistical design of the EWMA chart with time-varying control limits in which the Taguchi's quadratic loss function is incorporated into the economic-statistical design based on Lorenzen and Vance's economical model. A nonlinear programming with statistical performance constraints is developed and solved to minimize the expected total quality cost per unit time. This model, which is divided into three parts, depends on whether production continues during the period when the assignable cause is being searched for and/or repaired. Through a computational procedure, the optimal decision variables, including the sample size, the sampling interval, the control limit width, and the smoothing constant, can be solved for by each model. It is showed that the optimal economic-statistical design solution can be found from the set of optimal solutions obtained from the statistical design, and both the optimal sample size and sampling interval always decrease as the magnitude of shift increases.     

Control charts for generalized exponential distribution percentiles

The generalized exponential (GE) distribution, which was introduced by Mudholkar and Srivastava in 1993 Mudholkar, G. S., Srivastava, D. K. (1993). Exponentiated Weibull family for analyzing bathtub failure data. IEEE Transactions on Reliability 42:299–302. [Google Scholar], has been studied for various applications of lifetime modelings. In this article, five control charts, that comprise the Shewhart-type chart and four parametric bootstrap charts based on maximum likelihood estimation method, the moment estimation method, probability plot method, and least-square error method for the GE percentiles, are investigated. An extensive Monte Carlo simulation study is conducted to compare the performance among all five control charts in terms of average run length. Finally, an example is given for illustration.     

A control chart for COM-Poisson distribution using a modified EWMA statistic

In this paper, a control chart has been developed for the Conway–Maxwell Poisson (COM-Poisson) distribution using the modified exponentially weighted moving average statistic. The proposed chart provides an efficient detection of smaller changes in the location parameter of the COM-Poisson distribution. The performance of the proposed control chart has been evaluated by the average and the standard deviation of the run length distribution for various parameters. Better detecting ability has also been compared with the existing control chart using EWMA statistic. Using simulation, we also showed the detecting ability over the traditional EWMA chart.     

A control chart for multivariate Poisson distribution using repetitive sampling

Control charts using repetitive group sampling have attracted a great deal of attention during the last few years. In the present article, we attempt to develop a control chart for the multivariate Poisson distribution using the repetitive group sampling scheme. In the proposed control chart, the monitoring statistic from the multivariate Poisson distribution has been used for the quick detection of the deteriorated process to avoid losses. The control coefficients have been estimated using the specified in-control average run lengths. The procedure of the proposed control chart has been explained by using the real-world example and a simulated data set. It has been observed that the proposed control chart is an efficient development for the quick detection of the nonrandom change in the manufacturing process.     

Copula-Based Bivariate ZIP Control Chart for Monitoring Rare Events

One difficulty with developing multivariate attribute control charts is the lack of the related joint distribution. So, if it would be possible to generate the joint distribution of two (or more) attribute characteristics, then a bivaraite (or multivariate) attribute control chart can be developed based on Types I and II errors. Copula function is a solution to the matter. In this article, applying the copula function approach, we achieve the joint distribution of two correlated zero inflated Poisson (ZIP) distributions. Then, using this joint distribution, we develop a bivaraite control chart which can be used for monitoring correlated rare events. This copula-based bivariate ZIP control chart is compared with the simultaneous use of two separate univariate ZIP control charts. Based on the average run length (ARL) measure, it is shown that the proposed control chart is much better than the simultaneous use of two separate univariate charts. In addition, a real case study related to the environmental air in a sterilization process is investigated to show the applicability of the developed control chart.     

On the Run Length of a State-Space Control Chart for Multivariate Autocorrelated Data

The literature on statistical process control (SPC) describes the negative effects of autocorrelation in terms of the increase in false alarms. This has been treated by the individual modeling of each series or the application of VAR models. In the former case, the analysis of the cross correlation structure between the variables is altered. In the latter, if the cross correlation is not strong, the filtering process may modify the weakest relations. In order to improve these aspects, state-space models have been introduced in multivariate statistical process control (MSPC). This article presents a proposal for building a control chart for innovations, estimating its average run length to highlight its advantages over the VAR approach mentioned above.