A new sampling method for estimating the population mean

A double L ranked set sampling (DLRSS) method is suggested for estimating the population mean. The DLRSS is compared with the simple random sampling (SRS), ranked set sampling (RSS) and L ranked set sampling (LRSS) methods based on the same number of measured units. The conditions for which the suggested estimator performs better than the other estimators are derived. It is found that, the suggested DLRSS estimator is an unbiased of the population mean, and is more efficient than its counterparts using SRS, RSS, and LRSS methods. Real data sets are used for illustration.     

Estimation of the population mean and median using truncation-based ranked set samples

In this paper, a new sampling method is suggested, namely truncation-based ranked set samples (TBRSS) for estimating the population mean and median. The suggested method is compared with the simple random sampling (SRS), ranked set sampling (RSS), extreme ranked set sampling (ERSS) and median-ranked set sampling (MRSS) methods. It is shown that for estimating the population mean when the underlying distribution is symmetric, TBRSS estimator is unbiased and it is more efficient than the SRS estimator based on the same number of measured units. For asymmetric distributions considered in this study, TBRSS estimator is more efficient than the SRS for all considered distributions except for exponential distribution when the selection coefficient gets large. When compared with ERSS and MRSS methods, TBRSS performs well with respect to ERSS for all considered distributions except for U(0, 1) distribution, while TBRSS efficiency is higher than that of MRSS for U(0, 1) distribution. For estimating the population median, the TBRSS estimators have higher efficiencies when compared with SRS and ERSS. A real data set is used to illustrate the suggested method.     

Robust extreme ranked set sampling

In this paper, a robust extreme ranked set sampling (RERSS) procedure for estimating the population mean is introduced. It is shown that the proposed method gives an unbiased estimator with smaller variance, provided the underlying distribution is symmetric. However, for asymmetric distributions a weighted mean is given, where the optimal weights are computed by using Shannon's entropy. The performance of the population mean estimator is discussed along with its properties. Monte Carlo simulations are used to demonstrate the performance of the RERSS estimator relative to the simple random sample (SRS), ranked set sampling (RSS) and extreme ranked set sampling (ERSS) estimators. The results indicate that the proposed estimator is more efficient than the estimators based on the traditional sampling methods.     

Selected Ranked Set Sampling

This paper proposes a sampling procedure called selected ranked set sampling (SRSS), in which only selected observations from a ranked set sample (RSS) are measured. This paper describes the optimal linear estimation of location and scale parameters based on SRSS, and for some distributions it presents the required tables for optimal selections. For these distributions, the optimal SRSS estimators are compared with the other popular simple random sample (SRS) and RSS estimators. In every situation the estimators based on SRSS are found advantageous at least in some respect, compared to those obtained from SRS or RSS. The SRSS method with errors in ranking is also described. The relative precision of the estimator of the population mean is investigated for different degrees of correlations between the actual and erroneous ranking. The paper reports the minimum value of the correlation coefficient between the actual and the erroneous ranking required for achieving better precision with respect to the usual SRS estimator and with respect to the RSS estimator.     

A Horvitz-Thompson Estimator of the Population Mean Using Inclusion Probabilities of Ranked Set Sampling

In this study, we define the Horvitz-Thompson estimator of the population mean using the inclusion probabilities of a ranked set sample in a finite population setting. The second-order inclusion probabilities that are required to calculate the variance of the Horvitz-Thompson estimator were obtained. The Horvitz-Thompson estimator, using the inclusion probabilities of ranked set sample, tends to be more efficient than the classical ranked set sampling estimator especially in a positively skewed population with small sizes. Also, we present a real data example with the volatility of gasoline to illustrate the Horvitz-Thompson estimator based on ranked set sampling.     

Estimating the population proportion in modified ranked set sampling methods

In this paper, proportion estimators and associated variance estimators are proposed for a binary variable with a concomitant variable based on modified ranked set sampling methods, which are extreme ranked set sampling (ERSS), median ranked set sampling (MRSS), percentile ranked set sampling (Per-RSS) and L ranked set sampling (LRSS) methods. The Monte Carlo simulation study is performed to compare the performance of the estimators based on bias, mean squared error, and relative efficiency for different levels of correlation coefficient, set and cycle sizes under normal and log-normal distributions. Moreover, the study is supported with real data application.     

Two-stage cluster sampling with hybrid ranked set sampling in the secondary sampling frame

In surveys of natural resources in agriculture, ecology, fisheries, forestry, environmental management, etc., cost-effective sampling methods are of major concern. In this paper, we propose a two-stage cluster sampling (TSCS) in integration with the hybrid ranked set sampling (HRSS)—named TSCS-HRSS—in the second stage of sampling for estimating the population mean. The TSCS-HRSS scheme encompasses several existing ranked set sampling (RSS) schemes and may help in selecting a smaller number of units to rank. It is shown both theoretically and numerically that the TSCS-HRSS provides an unbiased estimator of the population mean and it is more precise than the mean estimators based on TSCS with SRS and RSS schemes. An unbiased estimator of the variance of the proposed mean estimator is also derived. A similar trend is observed when studying the impact of imperfect rankings on the performance of the TSCS-HRSS based mean estimator.     

Estimation of system reliability for exponential distributions based on L ranked set sampling

Abstract

In the case where strength and stress both follow exponential distributions, this paper considers the maximum likelihood estimator (MLE) of the system reliability based on L ranked set sampling (LRSS). The proposed MLE is shown to have existence, uniqueness and asymptotic normality, and its asymptotic variance is obtained by the Fisher information matrix of LRSS. The values of asymptotic relative efficiencies show that the proposed MLE is always more efficient than the MLE using simple random sampling (SRS). However, the MLE using LRSS cannot be written in closed form. Therefore, the modified MLE is proposed using the technique replaced some terms in the maximum likelihood equations by their expectations. The newly modified MLE using LRSS is shown to be superior to the MLE using SRS. Finally, the proposed method is applied to a real data set on metastatic renal carcinoma study.     

Nonparametric Estimation for Random Censored Data Based on Ranking Set Sampling

In the case where the population distribution is unknown, the Kaplan–Meier estimator of the reliability function based on a ranked set sample with random right-censored data is first proposed. It is shown to be a unique self-consistent estimator. Then, the censored RSS estimator of the population mean is constructed. A simulation study is conducted to compare the performance of the proposed estimators with the corresponding estimators based on a simple random sample. It is shown that the ranked set sampling has higher efficiency. Finally, the proposed method is applied to a renal carcinoma study.     

Estimation of mean based on modified robust extreme ranked set sampling

In this paper, double robust extreme ranked set sampling (DRERSS) and its properties for estimating the population mean are considered. It turns out that, when the underlying distribution is symmetric, DRERSS gives unbiased estimators of the population mean. Also, it is found that DRERSS is more efficient than the simple random sampling (SRS), ranked set sampling (RSS), and extreme ranked set sampling (ERSS) methods. For asymmetric distributions considered in this study, the DRERSS has a small bias and it is more efficient than SRS, RSS, and ERSS. A real data set is used to illustrate the DRERSS method.     

Estimating the population proportion in pair ranked set sampling with application to air quality monitoring

In this paper, we consider the problem of estimating the population proportion in pair ranked set sampling design. An unbiased estimator for the population proportion is proposed, and its theoretical properties are studied. It is shown that the estimator is more (less) efficient than its counterpart in simple random sampling (ranked set sampling). Asymptotic normality of the estimator is also established. Application of the suggested procedure is illustrated using a data set from an environmental study.     

Quantile Estimation Using Ranked Set Samples from a Population with Known Mean

Ranked set sampling (RSS) is a cost-efficient technique for data collection when the units in a population can be easily judgment ranked by any cheap method other than actual measurements. Using auxiliary information in developing statistical procedures for inference about different population characteristics is a well-known approach. In this work, we deal with quantile estimation from a population with known mean when data are obtained according to RSS scheme. Through the simple device of mean-correction (subtract off the sample mean and add on the known population mean), a modified estimator is constructed from the standard quantile estimator. Asymptotic normality of the new estimator and its asymptotic efficiency relative to the original estimator are derived. Simulation results for several underlying distributions show that the proposed estimator is more efficient than the traditional one.     

Ranked set sampling with random subsamples

A ranked sampling procedure with random subsamples is proposed to estimate the population mean. Four methods of obtaining random subsamples are described. Several estimators of the mean of the population based on random subsamples in ranked set sampling are proposed. These estimators are compared with the mean of a simple random sample for estimating the mean of symmetric and skew distributions. Extensive simulation under several subsampling distributions, sample sizes, and symmetric and skew distributions shows that the estimators of the mean based on random subsamples are more accurate than existing methods.     

General procedure for estimating the population mean using ranked set sampling

In this paper, we suggest a class of estimators for estimating the population mean ? of the study variable Y using information on X?, the population mean of the auxiliary variable X using ranked set sampling envisaged by McIntyre [A method of unbiased selective sampling using ranked sets, Aust. J. Agric. Res. 3 (1952), pp. 385–390] and developed by Takahasi and Wakimoto [On unbiased estimates of the population mean based on the sample stratified by means of ordering, Ann. Inst. Statist. Math. 20 (1968), pp. 1–31]. The estimator reported by Kadilar et al. [Ratio estimator for the population mean using ranked set sampling, Statist. Papers 50 (2009), pp. 301–309] is identified as a member of the proposed class of estimators. The bias and the mean-squared error (MSE) of the proposed class of estimators are obtained. An asymptotically optimum estimator in the class is identified with its MSE formulae. To judge the merits of the suggested class of estimators over others, an empirical study is carried out.     

Unbiased Estimation of the Distribution Function of an Exponential Population Using Order Statistics with Application in Ranked Set Sampling

In this paper we consider the problem of unbiased estimation of the distribution function of an exponential population using order statistics based on a random sample. We present a (unique) unbiased estimator based on a single, say ith, order statistic and study some properties of the estimator for i = 2. We also indicate how this estimator can be utilized to obtain unbiased estimators when a few selected order statistics are available as well as when the sample is selected following an alternative sampling procedure known as ranked set sampling. It is further proved that for a ranked set sample of size two, the proposed estimator is uniformly better than the conventional nonparametric unbiased estimator, further, for a general sample size, a modified ranked set sampling procedure provides an unbiased estimator uniformly better than the conventional nonparametric unbiased estimator based on the usual ranked set sampling procedure.     

辅以排序集样本的分层抽样方法研究

分层抽样中,样本在各层中的不同获取方式会对估计量的精度和试验费用产生一定的影响,而已有的理论方法大多不能在提高精度的同时降低调查费用。为此,将排序抽样与分层抽样方法相结合,提出了辅以排序集样本的分层抽样方案,并得到了总体均值的估计量以及这一估计量的良好性质。这些结果表明,与单一的分层随机抽样相比,这种抽样设计的估计量具有更高的精度,同时也节约了各层抽样调查的费用。     

Estimation of Finite Population Mean in Stratified Random Sampling with Two Auxiliary Variables under Double Sampling Design

In this article, a chain ratio-product type exponential estimator is proposed for estimating finite population mean in stratified random sampling with two auxiliary variables under double sampling design. Theoretical and empirical results show that the proposed estimator is more efficient than the existing estimators, i.e., usual stratified random sample mean estimator, Chand (1975) chain ratio estimator, Choudhary and Singh (2012) estimator, chain ratio-product-type estimator, Sahoo et al. (1993) difference type estimator, and Kiregyera (1984) regression-type estimator. Two data sets are used to illustrate the performances of different estimators.     

Estimation of Population Variance from Multi-ranker Ranked Set Sampling Designs

In this article, we develop an estimator for a population variance based on a multi-ranker ranked set sampling design. In a multi-ranker design, the units are ranked by more than one ranker allowing ties whenever the confidence level of the rankers is low. The ranking information of all rankers is then combined in a meaningful way to create a single measure. This measure is used to construct the sampling design and a new estimator for the population variance. The article investigates the bias and relative efficiency of the proposed variance estimator. It is shown that the new estimator performs as good as or better than its competitors in the literature.     

Stratified pair ranked set sampling

Stratified pair ranked set sampling is introduced and applied in estimating the population mean. Mathematical properties of the suggested estimator are treated. The estimator and its competitors are also compared through some numerical studies. Usefulness of the proposed design is illustrated using a cost analysis.     

Robust extreme double ranked set sampling

As a well-known method for selecting representative samples of populations, ranked set sampling (RSS) has been considered increasingly in recent years. This (RSS) method has proved to be more efficient than the usual simple random sampling (SRS) for estimating most of the population parameters. In order to have a more efficient estimate of the population mean, a new sampling scheme called as robust extreme double ranked set sampling (REDRSS) is introduced and investigated in this paper. A simulation study shows that using REDRSS scheme gives more efficient estimates of population mean with smaller variance than the usual SRS, RSS and most other sampling schemes based on RSS estimators in non-uniform (symmetric or non-symmetric) distributions.