On a class of variance balanced incomplete block designs

In this paper variance balanced incomplete block designs have been constructed for situations when suitable BIB designs do not exist for a given number of treatments, because of the contraints bk=vr, λ(v-1) = r(k-l). These variance balanced designs are in unequal block sizes and unequal replications.     

Some optimal block designs with nested rows and columns for research on alternative methods of limiting slug damage

Some criteria of optimality of a block design with nested rows and columns are considered. The criteria are based on the eigenvalues of the information matrix C or on the eigenvalues of the matrix C with respect to a diagonal matrix R of treatment replications. New constructions of some optimal block designs with nested rows and columns are presented for application to special plant protection experiments.     

General orthogonal designs for parameter estimation of ANOVA models under weighted sum-to-zero constraints

ABSTRACT

Traditional studies on optimal designs for ANOVA parameter estimation are based on the framework of equal probabilities of appearance for each factor's levels. However, this premise does not hold in a variety of experimental problems, and it is of theoretical and practical interest to investigate optimal designs for parameters with unequal appearing odds. In this paper, we propose a general orthogonal design via matrix image, in which all columns’ matrix images are orthogonal with each other. Our main results show that such designs have A- and E-optimalities on the estimation of ANOVA parameters which have unequal appearing odds. In addition, we develop two simple methods to construct the proposed designs. The optimality of the design is also validated by a simulation study.     

Generalized neighbor designs with block size 3

A generalized neighbor design relaxes the equality condition on the number of times two treatments as neighbors in the design. In this article, we have considered the construction of some classes of generalized neighbor designs with block size k=3 by using the method of cyclic shifts. The distinguishing feature of this construction method is that the properties of a design can easily be obtained from the sets of shifts instead of constructing the actual blocks of the design. A catalog of generalized neighbor designs with block size k=3 is compiled for v∈{5,6,…,18} treatments and for different replications. We provide the reader with a simpler method of construction, and in general the catalog that gives an open choice to the experimenter for selecting any class of neighbor designs.     

A simple method to obtain minimum aberration split-plot designs

ABSTRACT

Split-plot designs have been utilized in factorial experiments with some factors applied to larger units and others to smaller units. Such designs with low aberration are preferred when the experimental size and the number of factors considered in both whole plot and subplot are determined. The minimum aberration split-plot designs can be obtained using either computer algorithms or the exhausted search. In this article, we propose a simple, easy-to-operate approach by using two ordered sequences of columns from two orthogonal arrays in obtaining minimum aberration split-plot designs for experiments of sizes 16 and 32.     

E- and R-optimality of block designs for treatment-control comparisons

Abstract

We study optimal block designs for comparing a set of test treatments with a control treatment. We provide the class of all E-optimal approximate block designs, which is characterized by simple linear constraints. Based on this characterization, we obtain a class of E-optimal exact designs for unequal block sizes. In the studied model, we provide a statistical interpretation for wide classes of E-optimal designs. Moreover, we show that all approximate A-optimal designs and a large class of A-optimal exact designs for treatment-control comparisons are also R-optimal. This reinforces the observation that A-optimal designs perform well even for rectangular confidence regions.     

Designs for symmetrical parallel line assays obtainable through group divisible designs

A wide class of block designs for symmetrical parallel line assays with even number of doses, obtainable through group divisible designs is considered. Several new designs can thus be obtained using group divisibledesigns. Group divisible designs are also shown to provide a unification of many exisiting designs which follow as special cases.     

ON INCOMPLETE BLOCK DESIGNS FOR SYMMETRIC PARALLEL LINE ASSAYS

Incomplete block designs for symmetric parallel line assays, which estimate L_p, L₁and L1/1 with full efficiency, are constructed in a unified manner. Necessary and sufficient conditions are given for existence. A complete solution is presented when the number of doses is even. A general systematic method of construction is given when the number of doses is odd, and all possible designs for up to 15 doses of each preparation are tabulated.     

A note on circular neighbor balanced designs

ABSTRACT

This paper describes some methods of constructing circular neighbor balanced and circular partially neighbor balanced block designs for estimation of direct and neighbor effects of the treatments. A class of circular neighbor balanced block designs with unequal block sizes is also proposed.     

Block designs for incomplete factorial treatment structures with two factors

Abstract

In this paper, the problem of obtaining efficient block designs for incomplete factorial treatment structure with two factors excluding one treatment combination for estimation of dual versus single treatment contrasts is considered. The designs have been obtained using the A-optimal completely randomized designs and modified strongest treatment interchange algorithm. A catalog of efficient block designs has been prepared for m₁?=?3, 4 and m₂?=?2, b?≤?10 and k?≤?9 and for m₁?=?3,4 and m₂?=?3, 4, b?≤?10 and k?≤?10.     

Optimal orthogonal block designs for four-mixture components in two blocks based on F-squares for Becker's models and K-model

Orthogonal block designs in mixture experiments have been extensively studied by various authors. Aggarwal et al. [M.L. Aggarwal, P. Singh, V. Sarin, and B. Husain, Mixture designs in orthogonal blocks using F-squares, METRON – Int. J. Statist. LXVII(2) (2009), pp. 105–128] considered the case of components assuming the same volume fractions and obtained mixture designs in orthogonal blocks using F-squares. In this paper, we have used the class of designs presented by Aggarwal et al. and have obtained D-, A- and E-optimal orthogonal block designs for four components in two blocks for Becker's mixture models and K-model, respectively. Orthogonality conditions for the considered models are also given.     

Construction of incomplete Sudoku square and partially balanced incomplete block designs

Abstract

The present article deals with the study of association among the elements of a Sudoku square. In this direction, we have defined an association scheme and constructed incomplete Sudoku square designs which are capable of studying four explanatory variables and also happen to be the designs for two-way elimination of heterogeneity. Some series of Partially Balanced Incomplete Block (PBIB) designs have also been obtained.     

Algorithmic construction of optimal block designs for two-colour cDNA microarray experiments using the linear mixed effects model

ABSTRACT

In this study, methods for efficient construction of A-, MV-, D- and E-optimal or near-optimal block designs for two-colour cDNA microarray experiments with array as the block effect are considered. Two algorithms, namely the array exchange and treatment exchange algorithms together with the complete enumeration technique are introduced. For large numbers of arrays or treatments or both, the complete enumeration method is highly computer intensive. The treatment exchange algorithm computes the optimal or near-optimal designs faster than the array exchange algorithm. The two methods however produce optimal or near-optimal designs with the same efficiency under the four optimality criteria.     

Random balanced resampling: A new method for estimating variance components in unbalanced designs

Variance components in factorial designs with balanced data are commonly estimated by equating mean squares to expected mean squares. For unbalanced data, the usual extensions of this approach are the Henderson methods, which require formulas that are rather involved. Alternatively, maximum likelihood estimation based on normality has been proposed. Although the algorithm for maximum likelihood is computationally complex, programs exist in some statistical packages. This article introduces a simpler method, that of creating a balanced data set by resampling from the original one. Revised formulas for expected mean squares are presented for the two-way case; they are easily generalized to larger factorial designs. The results of a number of simulation studies indicate that, in certain types of designs, the proposed method has performance advantages over both the Henderson Method I and maximum likelihood estimators.     

A nonparametric procedure for the analysis of balanced crossover designs

The authors propose nonparametric tests for the hypothesis of no direct treatment effects, as well as for the hypothesis of no carryover effects, for balanced crossover designs in which the number of treatments equals the number of periods p, where p ≥ 3. They suppose that the design consists of n replications of balanced crossover designs, each formed by m Latin squares of order p. Their tests are permutation tests which are based on the n vectors of least squares estimators of the parameters of interest obtained from the n replications of the experiment. They obtain both the exact and limiting distribution of the test statistics, and they show that the tests have, asymptotically, the same power as the F‐ratio test.     

Planning step-stress test plans under Type-I censoring for the log-location-scale case

In this paper, we consider a k-level step-stress accelerated life-testing (ALT) experiment with unequal duration steps τ=(τ₁, …, τ _k ). Censoring is allowed only at the change-stress point in the final stage. A general log-location-scale lifetime distribution with mean life which is a linear function of stress, along with a cumulative exposure model, is considered as the working model. Under this model, the determination of the optimal choice of τ for both Weibull and lognormal distributions are addressed using the variance–optimality criterion. Numerical results show that for a general log-location-scale distributions, the optimal k-step-stress ALT model with unequal duration steps reduces just to a 2-level step-stress ALT model.     

D-optimal designs for covariate models

The problem of finding D-optimal or D-efficient designs in the presence of covariates is considered under a completely randomized design set-up with v treatments, k covariates and N experimental units. In contrast to Lopes Troya [Lopes Troya, J., 1982, Optimal designs for covariates models. Journal of Statistical Planning and Inference, 6, 373–419.], who considered this problem in the equireplicate case, we do not assume that N/v is an integer, and this allows us to study situations where no equireplicate design exists. Even when N/v is an integer, it is seen quite counter-intuitively that there are situations where a non-equireplicate design outperforms the best equireplicate design under the D-criterion.     

Nonparametric methods in multivariate factorial designs for large number of factor levels

We propose different multivariate nonparametric tests for factorial designs and derive their asymptotic distribution for the situation where the number of replications is limited, whereas the number of treatments goes to infinity (large a, small n case). The tests are based on separate rankings for the different variables, and they are therefore invariant under separate monotone transformations of the individual variables.     

Mixture designs with orthogonal blocks

Constructions of blocked mixture designs are considered in situations where BLUEs of the block effect contrasts are orthogonal to the BLUEs of the regression coefficients. Orthogonal arrays (OA), Balanced Arrays (BAs), incidence matrices of balanced incomplete block designs (BIBDs), and partially balanced incomplete block designs (PBIBDs) are used. Designs with equal and unequal block sizes are considered. Also both cases where the constants involved in the orthogonality conditions depend and do not depend on the factors have been taken into account. Some standard (already available) designs can be obtained as particular cases of the designs proposed here.     

Optimum designs for estimating EDp based on raw optical density data

For raw optical density (ROD) data, such as those generated in biological assays employing an ELISA plate reader, ED_p-optimal designs are identified for a family of homogeneous non-linear models with two parameters. In every case, the theoretical ED_p-optimal design is a design with one or two support points. These theoretical optimal designs might not be suitable for many practical applications. To overcome this shortcoming, we have specified ED_p-optimal designs within the class of k-point equally spaced and uniform designs. The efficiency robustness of these designs with respect to initial nominal values of the parameters have been investigated.