Admissible tests for the mean with additional information

Let X be a po-normal random vector with unknown µ and unknown covariance matrix ∑ and let X be partitioned as X = (X^′ ₍₁₎, …, X^′ _(r))′ where X_(j)is a subvector of X with dimension p_jsuch that ∑^r _j=1Pj = P0. Some admissible tests are derived for testing H₀: μ = 0 versus H₁: μ ¦0 based on a sample drawn from the whole vector X of dimension p and r additional samples drawn from X₍₁₎, X₍₂₎, …, X(r) respectively, All (r+1) samples are assumed to be independent. The distribution of some of the tests' statistics involved are also derived.     

Identifying the time of a step change with multivariate single control charts

Change point estimation procedures simplify the efforts to search for and identify special causes in multivariate statistical process monitoring. After a signal is generated by the simultaneously used control charts or a single control chart, add-on change point procedure estimates the time of the change. In this study, multivariate joint change point estimation performance for simultaneous monitoring of both location and dispersion is compared under the assumption that various single charts are used to monitor the process. The change detection performance for several structural changes for the mean vector and covariance matrix is also discussed. It is concluded that choice of the control chart to obtain a signal may affect the change point detection performance.     

Hayter and Tsui's test with double sampling for the vector mean of multivariate normal population

Abstract

In this paper, we introduce a version of Hayter and Tsui's statistical test with double sampling for the vector mean of a population under multivariate normal assumption. A study showed that this new test was more or as efficient than the well-known Hotelling's T² with double sampling. Some nice features of Hayter and Tsui's test are its simplicity of implementation and its capability of identifying the errant variables when the null hypothesis is rejected. Taking that into consideration, a new control chart called HTDS is also introduced as a tool to monitor multivariate process vector mean when using double sampling.     

Multivariate analysis with an autoregressive covariance model

This paper addresses the problem of testing the multivariate linear hypothesis when the errors follow an antedependence model (Gabriel, 1961, 1962). Antedependence can be formulated as a nonstationary autoregressive model of general order. Three test statistics are derived that provide analogs to three commonly used MANOVA statistics: Wilks' Lambda, the Lawley-Hotelling Trace, and Pillai's Trace. Formulas are given for each of these statistics that show how they can be obtained From any statistical computing package that calculates the usual MANOVA statistics. These antedependent statistics would be appropriate in analyzing certain multivariate data sets in which repeated measurements are taken on the same subjects over a period of time.     

A Comparative Study of Different Methodologies for Fault Diagnosis in Multivariate Quality Control

Different methodologies for fault diagnosis in multivariate quality control have been proposed in recent years. These methods work in the space of the original measured variables and have performed reasonably well when there is a reduced number of mildly correlated quality and/or process variables with a well-conditioned covariance matrix. These approaches have been introduced by emphasizing their positive or negative virtues, generally on an individual basis, so it is not clear for the practitioner the best method to be used. This article provides a comprehensive study of the performance of diverse methodological approaches when tested on a large number of distinct simulated scenarios. Our primary aim is to highlight key weaknesses and strengths in these methods as well as clarifying their relationships and the requirements for their implementation in practice.     

A note on a parametric extension of rank tests to the analysis of multifactor experiments within blocks

A general rank test procedure based on an underlying multinomial distribution is suggested for randomized block experiments with multifactor treatment combinations within each block. The Wald statistic for the multinomial is used to test hypotheses about the within–block rankings. This statistic is shown to be related to the one–sample Hotellingt's T² statistic, suggesting a method for computing the test statistic using the standard statistical computer packages.     

Modeling longitudinal binomial responses: implications from two dueling paradigms

The generalized estimating equations (GEEs) and generalized linear mixed-effects model (GLMM) are the two most popular paradigms to extend models for cross-sectional data to a longitudinal setting. Although the two approaches yield well-interpreted models for continuous outcomes, it is quite a different story when applied to binomial responses. We discuss major modeling differences between the GEE- and GLMM-derived models by presenting new results regarding the model-driven differences. Our results show that GLMM induces some artifacts in the marginal models at assessment times, making it inappropriate when applied to such responses from real study data. The different interpretations of parameters resulting from the conceptual difference between the two modeling approaches also carry quite significant implications and ramifications with respect to data and power analyses. Although a special case involving a scale difference in parameters between GEE and GLMM has been noted in the literature, its implications in real data analysis has not been thoroughly addressed. Further, this special case has a very limited covariate structure and does not apply to most real studies, especially multi-center clinical trials. The new results presented fill a substantial gap in the literature regarding the model-driven differences between the two dueling paradigms.     

Detection and Interpretation of a Multivariate Signal Using Combined Charts

A control procedure is presented in this article that is based on jointly using two separate control statistics in the detection and interpretation of signals in a multivariate normal process. The procedure detects the following three situations: (i) a mean vector shift without a shift in the covariance matrix; (ii) a shift in process variation (covariance matrix) without a mean vector shift; and (iii) both a simultaneous shift in the mean vector and covariance matrix as the result of a change in the parameters of some key process variables. It is shown that, following the occurrence of a signal on either of the separate control charts, the values from both of the corresponding signaling statistics can be decomposed into interpretable elements. Viewing the two decompositions together helps one to specifically identify the individual components and associated variables that are being affected. These components may include individual means or variances of the process variables as well as the correlations between or among variables. An industrial data set is used to illustrate the procedure.     

A statistical method for the serial comparison of vector cardiograms

In the absence of quantitative clinical standards to detect serial changes in cardiograms, statistical procedures are proposed as an alternative. These procedures are preceded by a dimension reducing orthonormal transformation of the original digitized cardiogram into a lower dimensional feature space. In feature space, mul-tivariate test criteria are given for the detection of changes in covariance matrices or mean vectors of the cardiograms. The flexibility is provided to compare the cardiograms of the same individual pairwise or simultaneously. Some pertinent remarks are also made about controlling the overall level of significance and its impact on the application of these techniques to cardiograms of USAF pilots.     

THE CONTROL CHART FOR INDIVIDUAL OBSERVATIONS FROM A MULTIVARIATE NON-NORMAL DISTRIBUTION

The Hotelling's T²statistic has been used in constructing a multivariate control chart for individual observations. In Phase II operations, the distribution of the T²statistic is related to the F distribution provided the underlying population is multivariate normal. Thus, the upper control limit (UCL) is proportional to a percentile of the F distribution. However, if the process data show sufficient evidence of a marked departure from multivariate normality, the UCL based on the F distribution may be very inaccurate. In such situations, it will usually be helpful to determine the UCL based on the percentile of the estimated distribution for T². In this paper, we use a kernel smoothing technique to estimate the distribution of the T²statistic as well as of the UCL of the T²chart, when the process data are taken from a multivariate non-normal distribution. Through simulations, we examine the sample size requirement and the in-control average run length of the T²control chart for sample observations taken from a multivariate exponential distribution. The paper focuses on the Phase II situation with individual observations.     

A Double Multivariate Exponentially Weighted Moving Average (dMEWMA) Control Chart for a Process Location Monitoring

A new control scheme, dMEWMA, for detecting shifts in the mean vector of multivariately normally distributed quality characteristics is presented. It is shown that the ARL performance of dMEWMA depends on the mean and variance-covariance matricies only through the non-centrality parameter value. Through Monte Carlo simulations, the performance of dMEWMA for detecting various shifts is compared to the competing control schemes, MEWMA and Hotelling's χ². It is concluded that dMEWMA outperforms MEWMA and Hotelling's χ² control schemes for small and larger shifts. In comparison to MEWMA control schemes, dMEWMA schemes are optimal for larger values of the smoothing parameter λ and perform much better for very small shifts in the process mean. Finally, an example to illustrate the construction of the dMEWMA control scheme is introduced.     

Comparing several experimental groups with a control in the multivariate case

This paper presents a multivariate extension of Dunnett's test for comparing simultaneously k treatment group means with a single control group mean. A test based on Hotelling T²statistics is presented and approximate critical values are evaluated for the case of equal numbers of observations in each group, for the .05 and .01 levels of significance, for 1 to 5 variates, for 1 to 10 treatment groups, and for varying degrees of freedom. The accuracy of the procedure for generating approximate critical values is assessed via simulation studies conducted for selected cases and an example is presented using real data.     

C434. Local bounds on power of T2 in scale families

In this paper, we have developed a likelihood ratio factorization technique for variable selection for multiple observations model. The asymptotic distribution of the selection criterion is also given. This technique has been applied to a marketing data set for illustration of the technique developed.     

Bivariate copulas on the Hotelling's T2 control chart

In this paper, we propose five types of copulas on the Hotelling's T² control chart when observations are from exponential distribution and use the Monte Carlo simulation to compare the performance of the control chart, which is based on the Average Run Length (ARL) for each copula. Five types of copulas function for specifying dependence between random variables are used and measured by Kendall's tau. The results show that the copula approach can be fitted the observation and we can use copula as an option for application on Hotelling's T² control chart.     

Generalized cochran-mantel-haenszel test statistics for correlated categorical data

Three new test statistics are introduced for correlated categorical data in stratified R×C tables. They are similar in form to the standard generalized Cochran-Mantel-Haenszel statistics but modified to handle correlated outcomes. Two of these statistics are asymptotically valid in both many-strata (sparse data) and large-strata limiting models. The third one is designed specifically for the many-strata case but is valid even with a small number of strata. This latter statistic is also appropriate when strata are assumed to be random.     

A Multivariate Synthetic Control Chart for Monitoring Process Mean Vector

In this article, a multivariate synthetic control chart is developed for monitoring the mean vector of a normally distributed process. The proposed chart is a combination of the Hotelling's T ² chart and Conforming Run Length chart. The operation, design, and performance of the chart are described. Average run length comparisons between some other existing control charts and the synthetic T ² chart are presented. They indicate that the synthetic T ² chart outperforms Hotelling's T ² chart and T ² chart with supplementary runs rules.     

Bootstrap-Based T 2 Multivariate Control Charts

Control charts have been used effectively for years to monitor processes and detect abnormal behaviors. However, most control charts require a specific distribution to establish their control limits. The bootstrap method is a nonparametric technique that does not rely on the assumption of a parametric distribution of the observed data. Although the bootstrap technique has been used to develop univariate control charts to monitor a single process, no effort has been made to integrate the effectiveness of the bootstrap technique with multivariate control charts. In the present study, we propose a bootstrap-based multivariate T ² control chart that can efficiently monitor a process when the distribution of observed data is nonnormal or unknown. A simulation study was conducted to evaluate the performance of the proposed control chart and compare it with a traditional Hotelling's T ² control chart and the kernel density estimation (KDE)-based T ² control chart. The results showed that the proposed chart performed better than the traditional T ² control chart and performed comparably with the KDE-based T ² control chart. Furthermore, we present a case study to demonstrate the applicability of the proposed control chart to real situations.     

Diagnosis of Multivariate Control Chart Signal Based on Dummy Variable Regression Technique

Abstract

It is common to monitor several correlated quality characteristics using the Hotelling's T ² statistic. However, T ² confounds the location shift with scale shift and consequently it is often difficult to determine the factors responsible for out of control signal in terms of the process mean vector and/or process covariance matrix. In this paper, we propose a diagnostic procedure called ‘D-technique’ to detect the nature of shift. For this purpose, two sets of regression equations, each consisting of regression of a variable on the remaining variables, are used to characterize the ‘structure’ of the ‘in control’ process and that of ‘current’ process. To determine the sources responsible for an out of control state, it is shown that it is enough to compare these two structures using the dummy variable multiple regression equation. The proposed method is operationally simpler and computationally advantageous over existing diagnostic tools. The technique is illustrated with various examples.     

On confidence regions for the mean of a multivariate time series

We consider the problem of setting up a confidence region for the mean of amultivariate timeseries ont he basis of a part-realisation of that series.A procedure for setting up a confidence interval for the mean of a univariate time series Is implicitin Jones(1976).We present an analogous procedure for setting up a confidence region for the mean of a multivariatet ime series.This procedure is base donastatistic which is an analogue of Hotelling'sT'.Our results are applied to a comparison of climate means obtained from experiments with a General Circulation Model of the earth's atmosphere.     

A comparison study of effectiveness and robustness of robust economic designs of T2 chart using genetic algorithm

ABSTRACT

Recently, researchers have tried to design the T² chart economically to achieve the minimum possible quality cost; however, when T² chart is designed, it is important to consider multiple scenarios. This research presents the robust economic designs of the T² chart where there is more than one scenario. An illustrative example is used to demonstrate the effect of the model parameters on the optimal designs. The genetic algorithm optimization method is employed to obtain the optimal designs. Simulation studies show that the robust economic designs of T² chart are more effective than traditional economic design in practice.