Minimum average fraction inspected for TCSP-1 plan

This paper presents the calculation of the average outgoing quality limit (AOQL) for the tightened single-level continuous sampling plan (TCSP-1 plan) based on a numerical method. A solution procedure is developed to find the parameters (i, f, k) that will meet the AOQL requirement, while also minimizing the average fraction inspected (AFI) for the TCSP-1 plan when the process average [pbar] (> AOQL) is known.     

Comparison between count of cumulative conforming sampling plans and Dodge–Romig single sampling plan

In this research, a new sampling system is introduced based on the concept of count of cumulative conforming control charts (CCC-charts). The proposed method is based on Markov modeling and negative binomial distribution. The proposed sampling system is compared with traditional sampling methods like Dodge–Romig single sampling plan based on lot tolerance percent defective (LTPD) and Dodge–Romig single sampling plan based on average outgoing quality limit (AOQL) and its superiority for larger values of lot sizes and process average is denoted using a comparison study.     

Minimum Average Total Inspection of Variable Lot-size Sampling Plan for Continuous Production

This paper explores the problem of minimizing the average total inspection (ATI) of Read & Beattie's variable lot-size sampling plan for continuous production. The solution procedure is developed to find the optimal parameters (n,  c) that will meet the average outgoing quality limit (AOQL) requirement, while also minimizing the ATI for this variable lot-size plan.     

Minimum average fraction inspected for short-run CSP-1 plan

This paper presents details of the calculation of the average outgoing quality limit (AOQL) for a short-run CSP-1 plan based on Y ang's renewal process approach. A solution procedure is developed to find the unique combination (i,f) that will meet the AOQL requirement, while also minimizing the average fraction inspected for the shortrun CSP-1 plan when the process average p (> AOQL) and production run length R are known.     

A generalized procedure for selection of attribute double sampling plan

A compact table, yielding attribute double sampling plan indexed by AQL, AOQL and LQL and double sampling scheme indexed by AQL is presented. Method of selecting the plans are indicated through examples.     

Modified tightened two-level continuous sampling plans

In this paper, a modification is proposed on the tightened two-level continuous sampling plan. The tightened two-level plan is one of the three tightened multi-level continuous sampling plans of Derman et al. (1957) with two sampling levels. A modified tightened two-level continuous sampling plan is considered, for which the rules concerning partial inspection depend, in part, on the length of time it takes to decide that the process quality is good enough that 100% inspection may be suspended (e.g. the time required to find i consecutive items free of defects). Using a Markov chain model, expressions for the performance measures of the modified MLP-T-2 plan are derived. The modified MLP-T-2 plan is shown to be identical to the MLP-T-2 plan. Tables are also presented for the selection of the modified MLP-T-2 plan when the AQL or LQL and AOQL are specified.     

Selection of multiple deferred (dependent) state sampling plans

This paper presents procedures and tables for the selection of minimum sample size multiple deferred (dependent) state sampling plan of type MDS and MDS - 1 for various entry conditions such as (AQL, LQL), (AQL, AOQL) etc.     

Selection of csp-t plans

Various continuous sampling plans have been proposed for monitoring the quality of continuous production processes. The multi-level continuous sampling plan of MIL-STD-1235C (1988) is designated as CSP-T Plan. CSP-T plan is a three-level tightened continuous sampling plan. It requires a switch to 100% inspection, at any level, whenever a nonconforming unit is found. This provides quick rectification in the event of a shift in quality. In this paper certain performance characteristics of CSP-T plan are derived using the approach of Stephens (1979) under the assumption that the production process is in statistical control. For the selection of CSP-T plans, two tables are given. These tables can be used to obtain parameters i (clearance interval) and f (sampling fraction) of the CSP-T plan for given acceptable quality level (AQL) with producer’ risk α=0.05 or the limiting quality level(LQL) with consumer’ risk β=0.10 and the outgoing quality limit(AOQL). Two examples are also given to illustrate the selection of plans from these tables     

Design of a CSP-1 plan based on regret-balanced criterion

This article explores the problem of designing a CSP-1 plan with the specified average outgoing quality limit (AOQL), the acceptable quality level (AQL), and the limiting quality level (LQL) value. By adopting the regret-balanced criterion under the producer's and consumer's interests of quality, we can design the optimal CSP-1 plan.     

Continuous inspection of Markov processes with a clearance interval

Dodge's continuous sampling plan-1 (CSP-1) with clearance interval zero may be inefficient if there is serial correlation between successive units which are Markov dependent and a clearance interval greater than zero is appropriate. For such a situation, the average outgoing quality limit (AOQL) expression has been obtained and, when the serial correlation coefficient of the Markov chain is assumed to be known a priori, it is numerically demonstrated that smaller AOQL values are achieved numerically for values of the clearance interval from 1 to 4, by improving the perform-ance ofCSP-L     

Dodge-Romig AOQL single sampling plans for inspection by variables

Acceptance sampling plans for inspection by variables, which minimize the mean inspection cost per lot of process average quality (assuming that the remainder of rejected lots is inspected), are derived under the condition that the maximum value of the mean fraction defective after sampling inspection, replacing all defective items found by good ones, shall be equal top _L . These plans are tabulated for chosen values of the given parameters, and compared with the Dodge-Romig AOQL attribute sampling plans. From the comparison it follows that under the same protection of consumer the AOQL plans for inspection by variables are in some situations more economical than the corresponding Dodge-Romig plans.     

Determination of single sampling attributes plans for given (aql. aoql)

This paper presents tables and a computer program for determining single sampling plans for given AQL, producer's risk and AOQL for the case of nonconforming units and nonconformities. Comparison with Soundararajan's (1981) procedures for selection of single sampling plans for given (AQL, AOQL) is also given     

Minimum Variance and VOQL Chain Sampling Plans–ChSP-4(c 1, c 2)

In this article the outgoing quality and the total inspection for the chain sampling plan ChSP-4(c ₁, c ₂) are introduced as well-defined random variables. The probability distributions of outgoing quality and total inspection are stated based on total rectification of non conforming units. The variances of these random variables are studied. The aim of this article is to develop procedures for minimum variance ChSP-4(c ₁, c ₂) sampling plans and their determination. In addition to minimum variance sampling plans, a procedure is developed for designing plans with a designated maximum variance, a VOQL (Variance of Outgoing Quality Limit) plan. The VOQL concept is analogous to the AOQL (Average Outgoing Quality Limit) except in the VOQL plan, it is the maximum variance which is established instead of the usual maximum AOQ.     

Design and Construction of a Variables Repetitive Group Sampling Plan for Unilateral Specification Limit

This paper attempts to develop a repetitive group sampling (RGS) plan by variables inspection for controlling the process fraction defective or the number of nonconformities when the quality characteristic follows a normal distribution and has only the lower or upper specification limit. The proposed sampling plan is derived by the exact sampling distribution rather than the approximation approach. The plan parameters are solved by a nonlinear optimization model which minimizes the average sample number required for inspection and fulfills the classical two-point conditions on the operating characteristic (OC) curve. The efficiency of the proposed variables RGS is examined and also compared with the existing variables single sampling plan in terms of the sample size required for inspection. The results indicate that the proposed variables RGS plan could significantly reduce samples required for inspection compared to the traditional variables single sampling plan.     

Double sampling attributes plans indexed by aql and aoql

Tables yielding double sampling attributes inspection plans indexed by AQL and AOQL are presented. The corresponding LQL values are also presented in the table.     

Multiple Sampling Inspection Plans for Attributes

A set of tables is presented enabling one to design multiple (Group sequential) sampling plans when various entry parameters are given. Table yielding item by item sequential sampling plans indexed by (AQL, AOQL) is also presented.     

A new sampling plan under the exponential distribution

This article considers a sampling plan when the quality characteristic follows the exponential distribution. We provide the exact approach and propose an approximated approach. In the proposed approximation, a new statistic combined with a Weibull transformation is used for the normal approximation. The plan parameters are obtained through the two-point approach at the acceptable quality level (AQL) and the limiting quality level (LQL). The tables for plan parameters are reported according to various values of the AQL and the LQL when the producer's and the consumer's risks are given. A real example is given to illustrate the proposed approximation approach.     

Dodge-roming AOQL plans for inspection by variables from numerical point of view

In this paper we shall deal with the AOQL single sampling plans for inspection by variables when the remainder of rejected lots is inspected. We shall report on an algorithm allowing calculation¹ of these plans. For the calculation we shall derive a new theorem (see Theorem 4) and we shall use an original method. Prepared with support from the Grant Agency of the Czech Republic. The calculation is considerably difficult, we must use sequently three numerical methods.     

Designing of a mixed-chain sampling plan based on the process capability index with chain sampling as the attributes plan

In this article, we propose a new mixed chain sampling plan based on the process capability index C_pk, where the quality characteristic of interest having double specification limits and follows the normal distribution with unknown mean and variance. In the proposed mixed plan, the chain sampling inspection plan is used for the inspection of attribute quality characteristics. The advantages of this proposed mixed sampling plan are also discussed. Tables are constructed to determine the optimal parameters for practical applications by formulating the problem as a non linear programming in which the objective function to be minimized is the average sample number and the constraints are related to lot acceptance probabilities at acceptable quality level and limiting quality level under the operating characteristic curve. The practical application of the proposed mixed sampling plan is explained with an illustrative example. Comparison of the proposed sampling plan is also made with other existing sampling plans.     

Designing a multiple state repetitive group sampling plan based on the coefficient of variation

A multiple state repetitive group sampling (MSRGS) plan is developed on the basis of the coefficient of variation (CV) of the quality characteristic which follows a normal distribution with unknown mean and variance. The optimal plan parameters of the proposed plan are solved by a nonlinear optimization model, which satisfies the given producer's risk and consumer's risk at the same time and minimizes the average sample number required for inspection. The advantages of the proposed MSRGS plan over the existing sampling plans are discussed. Finally an example is given to illustrate the proposed plan.