首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
When a process is monitored with a T 2 control chart in a Phase II setting, the MYT decomposition is a valuable diagnostic tool for interpreting signals in terms of the process variables. The decomposition splits a signaling T 2 statistic into independent components that can be associated with either individual variables or groups of variables. Since these components are T 2 statistics with known distributions, they can be used to determine which of the process variable(s) contribute to the signal. However, this procedure cannot be applied directly to Phase I since the distributions of the individual components are unknown. In this article, we develop the MYT decomposition procedure for a Phase I operation, when monitoring a random sample of individual observations and identifying outliers. We use a relationship between the T 2 statistic in Phase I with the corresponding T 2 statistic resulting when an observation is omitted from this sample to derive the distributions of these components and demonstrate the Phase I application of the MYT decomposition.  相似文献   

2.
The Hotelling's T2statistic has been used in constructing a multivariate control chart for individual observations. In Phase II operations, the distribution of the T2statistic is related to the F distribution provided the underlying population is multivariate normal. Thus, the upper control limit (UCL) is proportional to a percentile of the F distribution. However, if the process data show sufficient evidence of a marked departure from multivariate normality, the UCL based on the F distribution may be very inaccurate. In such situations, it will usually be helpful to determine the UCL based on the percentile of the estimated distribution for T2. In this paper, we use a kernel smoothing technique to estimate the distribution of the T2statistic as well as of the UCL of the T2chart, when the process data are taken from a multivariate non-normal distribution. Through simulations, we examine the sample size requirement and the in-control average run length of the T2control chart for sample observations taken from a multivariate exponential distribution. The paper focuses on the Phase II situation with individual observations.  相似文献   

3.
In this study we discuss the group sequential procedures for comparing two treatments based on multivariate observations in clinical trials. Also we suppose that a response vector on each of two treatments has a multivariate normal distribution with unknown covariance matrix. Then we propose a group sequential x2 statistic in order to carry out repeated significance test for hypothesis of no difference between two population mean vectors. In order to realize the group sequential test where average sample number is reduced, we propose another modified group sequential x2 statistic by extension of Jennison and Turnbull ( 1991 ). After construction of repeated confidence boundaries for making the repeated significance test, we compare two group sequential procedures based on two statistics regarding the average sample number and the power of the test in the simulations.  相似文献   

4.
《统计学通讯:理论与方法》2012,41(13-14):2465-2489
The Akaike information criterion, AIC, and Mallows’ C p statistic have been proposed for selecting a smaller number of regressors in the multivariate regression models with fully unknown covariance matrix. All of these criteria are, however, based on the implicit assumption that the sample size is substantially larger than the dimension of the covariance matrix. To obtain a stable estimator of the covariance matrix, it is required that the dimension of the covariance matrix is much smaller than the sample size. When the dimension is close to the sample size, it is necessary to use ridge-type estimators for the covariance matrix. In this article, we use a ridge-type estimators for the covariance matrix and obtain the modified AIC and modified C p statistic under the asymptotic theory that both the sample size and the dimension go to infinity. It is numerically shown that these modified procedures perform very well in the sense of selecting the true model in large dimensional cases.  相似文献   

5.
A new diagnostic method for VARMA(p,q) time series models is introduced. The procedure is based on a statistic that generalizes to a multivariate setting the properties of the usual univariate ARMA(p,q) residual correlations. A multiple version of the cumulative periodogram statistic is also suggested. Simulation studies and one real data application are presented.  相似文献   

6.
A control procedure is presented in this article that is based on jointly using two separate control statistics in the detection and interpretation of signals in a multivariate normal process. The procedure detects the following three situations: (i) a mean vector shift without a shift in the covariance matrix; (ii) a shift in process variation (covariance matrix) without a mean vector shift; and (iii) both a simultaneous shift in the mean vector and covariance matrix as the result of a change in the parameters of some key process variables. It is shown that, following the occurrence of a signal on either of the separate control charts, the values from both of the corresponding signaling statistics can be decomposed into interpretable elements. Viewing the two decompositions together helps one to specifically identify the individual components and associated variables that are being affected. These components may include individual means or variances of the process variables as well as the correlations between or among variables. An industrial data set is used to illustrate the procedure.  相似文献   

7.
Wilks’ ratio statistic can be defined in terms of the ratio of the sample generalized variances of two non-independent estimators of the same covariance matrix. Recently this statistic has been proposed as a control statistic for monitoring changes in the covariance matrix of a multivariate normal process in a Phase II situation, particularly when the dimension is larger than the sample size. In this article we derive a technique for decomposing Wilks’ ratio statistic into the product of independent factors that can be associated with the components of the covariance matrix. With these results, we demonstrate that, when a signal is detected in a control procedure for the Phase II monitoring of process variability using the ratio statistic, the signaling value can be decomposed and the process variables contributing to the signal can be specifically identified.  相似文献   

8.
A new statistic, (p), is developed for variable selection in a system-of-equations model. The standardized total mean square error in the (p)statistic is weighted by the covariance matrix of dependent variables instead of the error covariance matrix of the true model as in the original definition. The new statistic can be also used for model selection in the non-nested models. The estimate of (p), SC(p), is derived and shown to become SCε(p) in the similar form of Cp in a single-equation model when the covariance matrix of sampled dependent variables is replaced by the error covariance matrix under the full model.  相似文献   

9.
Test statistics for sphericity and identity of the covariance matrix are presented, when the data are multivariate normal and the dimension, p, can exceed the sample size, n. Under certain mild conditions mainly on the traces of the unknown covariance matrix, and using the asymptotic theory of U-statistics, the test statistics are shown to follow an approximate normal distribution for large p, also when p?n. The accuracy of the statistics is shown through simulation results, particularly emphasizing the case when p can be much larger than n. A real data set is used to illustrate the application of the proposed test statistics.  相似文献   

10.
In statistical process control applications, the multivariate T 2 control chart based on Hotelling's T 2 statistic is useful for detecting the presence of special causes of variation. In particular, use of the T 2 statistic based on the successive differences covariance matrix estimator has been shown to be very effective in detecting the presence of a sustained step or ramp shift in the mean vector. However, the exact distribution of this statistic is unknown. In this article, we derive the maximum value of the T 2 statistic based on the successive differences covariance matrix estimator. This distributional property is crucial for calculating an approximate upper control limit of a T 2 control chart based on successive differences, as described in Williams et al. (2006 Williams , J. D. , Woodall , W. H. , Birch , J. B. , Sullivan , J. H. ( 2006 ). On the distribution of T 2 statistics based on successive differences . J. Qual. Technol. 38 : 217229 .[Taylor & Francis Online], [Web of Science ®] [Google Scholar]).  相似文献   

11.
The estimation of the location vector of a p-variate elliptically contoured distribution (ECD) is considered using independent random samples from two multivariate elliptically contoured populations when it is apriori suspected that the location vectors of the two populations are equal. For the setting where the covariance structure of the populations is the same, we define the maximum likelihood, Stein-type shrinkage and positive-rule shrinkage estimators. The exact expressions for the bias and quadratic risk functions of the estimators are derived. The comparison of the quadratic risk functions reveals the dominance of the Stein-type estimators if p ≥ 3. A graphical illustration of the risk functions under a “typical” member of the elliptically contoured family of distributions is provided to confirm the analytical results.  相似文献   

12.
Abstract

It is common to monitor several correlated quality characteristics using the Hotelling's T 2 statistic. However, T 2 confounds the location shift with scale shift and consequently it is often difficult to determine the factors responsible for out of control signal in terms of the process mean vector and/or process covariance matrix. In this paper, we propose a diagnostic procedure called ‘D-technique’ to detect the nature of shift. For this purpose, two sets of regression equations, each consisting of regression of a variable on the remaining variables, are used to characterize the ‘structure’ of the ‘in control’ process and that of ‘current’ process. To determine the sources responsible for an out of control state, it is shown that it is enough to compare these two structures using the dummy variable multiple regression equation. The proposed method is operationally simpler and computationally advantageous over existing diagnostic tools. The technique is illustrated with various examples.  相似文献   

13.
In this paper, we consider testing the equality of two mean vectors with unequal covariance matrices. In the case of equal covariance matrices, we can use Hotelling’s T2 statistic, which follows the F distribution under the null hypothesis. Meanwhile, in the case of unequal covariance matrices, the T2 type test statistic does not follow the F distribution, and it is also difficult to derive the exact distribution. In this paper, we propose an approximate solution to the problem by adjusting the degrees of freedom of the F distribution. Asymptotic expansions up to the term of order N? 2 for the first and second moments of the U statistic are given, where N is the total sample size minus two. A new approximate degrees of freedom and its bias correction are obtained. Finally, numerical comparison is presented by a Monte Carlo simulation.  相似文献   

14.
In multiple linear regression analysis each lower-dimensional subspace L of a known linear subspace M of ? n corresponds to a non empty subset of the columns of the regressor matrix. For a fixed subspace L, the C p statistic is an unbiased estimator of the mean square error if the projection of the response vector onto L is used to estimate the expected response. In this article, we consider two truncated versions of the C p statistic that can also be used to estimate this mean square error. The C p statistic and its truncated versions are compared in two example data sets, illustrating that use of the truncated versions may result in models different from those selected by standard C p .  相似文献   

15.
In this paper we use Monte Carlo Simulation methodology to compare the effectiveness of five multivariate quality control methods, namely Hotelling T 2, Multivariate Shewhart Char, Discriminant Analysis, Decomposition Method, and Multivariate Ridge Residual Chart-developed by Authors-, for controlling the mean vector in a multivariate process. P-dimensional multivariate normal data generated using different covariance structures. Various amount of shift in the mean vector is induced and the resulting Average Run Length (ARL) is computed. The effectiveness of each method with regard to ARL is discussed.  相似文献   

16.
A characterization of the distribution of the multivariate quadratic form given by X A X′, where X is a p × n normally distributed matrix and A is an n × n symmetric real matrix, is presented. We show that the distribution of the quadratic form is the same as the distribution of a weighted sum of non central Wishart distributed matrices. This is applied to derive the distribution of the sample covariance between the rows of X when the expectation is the same for every column and is estimated with the regular mean.  相似文献   

17.
18.
In this article, we consider the problem of testing the mean vector in the multivariate normal distribution, where the dimension p is greater than the sample size N. We propose a new test TBlock and obtain its asymptotic distribution. We also compare the proposed test with other two tests. The simulation results suggest that the performance of the new test is comparable to the existing two tests, and under some circumstances it may have higher power. Therefore, the new statistic can be employed in practice as an alternative choice.  相似文献   

19.
Traditional multivariate control charts are based upon the assumption that the observations follow a multivariate normal distribution. In many practical applications, however, this supposition may be difficult to verify. In this paper, we use control charts based on robust estimators of location and scale to improve the capability of detection observations out of control under non-normality in the presence of multiple outliers. Concretely, we use a simulation process to analyse the behaviour of the robust alternatives to Hotelling's T 2, which use minimum volume ellipsoidal (MVE) and minimum covariance determinant (MCD) in the presence of observations with a Student's t-distribution. The results show that these robust control charts are good alternatives for small deviations from normality due to the fact that the percentage of out-of-control observations detected for these charts in the Phase II are higher.  相似文献   

20.
Tests based on the Anderson–Darling statistic, a third moment statistic and the classical Pearson–Fisher X 2 statistic, along with its third-order component, are considered. A small critical value and power study are given. Some examples illustrate important applications.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号