Failure Data Analysis with Extended Weibull Distribution

A consecutive k-out-of-n: G system consists of n linearly ordered components functions if and only if at least k consecutive components function. In this article we investigate the consecutive k-out-of-n: G system in a setup of multicomponent stress-strength model. Under this setup, a system consists of n components functions if and only if there are at least k consecutive components survive a common random stress. We consider reliability and its estimation of such a system whenever there is a change and no change in strength. We provide minimum variance unbiased estimation of system reliability when the stress and strength distributions are exponential with unknown scale parameters. A nonparametric minimum variance unbiased estimator is also provided.     

Reliability of weighted k-out-of-n: G systems consisting of two types of components and a cold standby component

In this article, the influence of a cold standby component to the reliability of weighted k-out-of-n: G systems consisting of two different types of components is studied. Weighted k-out-of-n: G systems are generalization of k-out-of-n systems that has attracted substantial interest in reliability theory because of their various applications in engineering. A method based on residual lifetimes of mixed components is presented for computing reliability of weighted k-out-of-n: G systems with two types of components and a cold standby component. Reliability and mean time to failure of different structured systems have been computed. Moreover, obtained results are used for defining optimal system configurations that can minimize the overall system costs.     

On capacity evaluation for multi-state weighted k-out-of-n system

ABSTRACT

Weighted k-out-of-n system has been widely used in various engineering areas. Performance of such system is characterized by the total capacity of the components. Therefore, capacity evaluation is of great importance for research on the behavior of the system over time. Capacity evaluation for binary weighted k-out-of-n system has been reported in the literature. In this paper, to shorten computational time, we first develop a multiplication method for capacity evaluation of binary weighted k-out-of-n system. We then generalize capacity evaluation to multi-state weighted k-out-of-n system. Recursive algorithm and multiplication algorithm are developed for capacity evaluation for such system. Comparison is made of the two methods in different aspects. An illustrative example of an oil transmission system is presented to demonstrate the implementation of the proposed methods.     

Dynamic Reliability Evaluation of Consecutive-k-Within-m-Out-of-n:F System

A consecutive k-within-m-out-of-n:F system consists of n linearly ordered components and fails if and only if there are m consecutive components which include among them at least k failed components. This system model generalizes both consecutive k-out-of-n:F and k-out-of-n:F systems. In this article, we study the dynamic reliability properties of consecutive k-within-m-out-of-n:F system consisting of exchangeable dependent components. We also obtain some stochastic ordering results and use them to get simple approximation formulae for the survival function and mean time to failure of this system.     

Reliability and Some Characteristics of Circular Consecutive-k-Within-m-Out-of-n:F System

A system can be classified with respect to the physical arrangement of its components and the functioning principle. A circular consecutive k-within-m-out-of-n:F system consists of n circularly ordered components and fails if and only if there are m consecutive components that include among them at least k failed components. A circular consecutive k-within-m-out-of-n:F system turns into circular consecutive k-out-of-n:F for m = k and k-out-of-n:F system for m = n. In this study, signature-based analysis of circular consecutive k-within-m-out-of-n:F system is performed. A new approximation to this system is provided based on maximum number of failed components and an illustrative example is given for different values of n, m, k to compare the approximate results with simulated and exact results.     

Mean Time to Failure of Weighted k-out-of-n: G Systems

The purpose of this article is to develop a Monte-Carlo simulation algorithm for computing mean time to failure (MTTF) of weighted-k-out-of-n:G and linear consecutive-weighted-k-out-of-n:G systems. Our algorithm is based on the use of appropriately defined stochastic process which represents the total weight of the system at time t. These stochastic processes are explicitly defined and used along with the ordered component lifetimes to simulate MTTF of the systems with weighted components.     

On the mean residual life of a generalized k-out-of-n system

A generalized k-out-of-n system consists of N modules in which the i th module is composed of n_i components in parallel. The system failswhen at least f components in the whole system or at least k consecutive modules have failed. In this article, we obtain the mean residual life function of such a generalized k-out-of-n system under different conditions, namely, when the number of components in each module is equal or unequal and when the components of the system are independent or exchangeable.     

On the Use of the Importance Measure for Multi-State Repairable k-out-of-n: G Systems

Importance measures in reliability systems are used to identify weak components in contributing to proper functioning of the system. Traditional importance measures mainly concern the change of the system reliability as the change of the reliability of one component and seldom consider the expected number of repairs of the objective component in unit time. This paper proposes an improvement potential rate importance (IPR) to verify the effectiveness of the improvement in system reliability for multi-state repairable k-out-of-n: G systems. Then the comparisons between IPR and Birnbaum importance are discussed. Finally, a case study is given to demonstrate the proposed IPR.     

Selected singular-generalized-hyperbolic distributions with applications to order statistics and reliability

In this paper, the truncated version of the selected multivariate generalized-hyperbolic distributions is introduced. Considering special truncations, the joint distribution of the consecutive order statistics from the multivariate generalized-hyperbolic (GH) distribution is derived. It is shown that this joint distribution can be expressed as mixtures of the truncated selected-GH distributions. All of these truncated distributions are expressed as the selected singular-GH distributions. These results are used to obtain some expressions for the reliability measures such as mean residual life time, mean inactivity time and regression mean residual life for k-out-of-n systems.     

Circular consecutive k-out-of-n systems with exchangeable dependent components

In this paper we study circular consecutive k-out-of-n systems consisting of exchangeable components. We derive explicit expressions for both unconditional and conditional survival functions for 2k+1≥n, while signature based mixture representations for general k are obtained. The applications and computational results concerned with mean residual life function and stochastic ordering are presented.     

The mean general residual lifetime of (n − k + 1)-out-of-n systems with exchangeable components

The study of the reliability properties of (n ? k + 1)-out-of-n systems has gained a great deal of attention, from both theoretical and practical perspectives. In this article, we consider (n ? k + 1)-out-of-n systems with exchangeable components and study the stochastic properties of two forms of residual lifetimes of such systems under the following conditions: n ? r + 1 (r ? k) components of the system are operating at time t > 0, and/or the rth (r < k) component has failed, but the system is working at time t. In addition, some results relating to the functions of the mean general residual lifetimes (MGRL) are derived for these systems. Finally, in accordance with the generalized Farlie–Gumbel–Morgenstern model, we present the reliability properties of the general residual lifetime of (n ? k + 1)-out-of-n systems and investigate the asymptotic behavior of the proposed MGRL functions with exponential marginals.     

On residual lifetimes in sequential (n ? k?+?1)-out-of-n systems

Sequential order statistics is an extension of ordinary order statistics. They model the successive failure times in sequential k-out-of-n systems, where the failures of components possibly affect the residual lifetimes of the remaining ones. In this paper, we consider the residual lifetime of the components after the kth failure in the sequential (n − k + 1)-out-of-n system. We extend some results on the joint distribution of the residual lifetimes of the remaining components in an ordinary (n − k + 1)-out-of-n system presented in Bairamov and Arnold (Stat Probab Lett 78(8):945–952, 2008) to the case of the sequential (n − k + 1)-out-of-n system.     

Extremum sieve estimation in k-out-of-n systems

This article considers the non parametric estimation of absolutely continuous distribution functions of independent lifetimes of non identical components in k-out-of-n systems, 2 ? k ? n, from the observed “autopsy” data. In economics, ascending “button” or “clock” auctions with n heterogeneous bidders with independent private values present 2-out-of-n systems. Classical competing risks models are examples of n-out-of-n systems. Under weak conditions on the underlying distributions, the estimation problem is shown to be well-posed and the suggested extremum sieve estimator is proven to be consistent. This article considers the sieve spaces of Bernstein polynomials which allow to easily implement constraints on the monotonicity of estimated distribution functions.     

Reliability Analysis of Unrepairable Systems with k-out-of-m:G Subsystems Subject to Suspended Animation

Two unrepairable series structure systems with k-out-of-m:G subsystems and spares are investigated. The first one consists of a k-out-of-m:G subsystem and a series subsystem while the other consists of two k-out-of-m:G subsystems. The systems have identical components with identical lifetime distributions and the working components are suspended as soon as the systems are down. Two Markov models are proposed for the reliability analysis of such systems and closed form results on the reliability and the mean time to failure (MTTF) are presented. Numerical examples are given to illustrate the impact of several parameters on the reliability of the systems.     

Optimal number of components in a load-sharing system for maximizing reliability

A $k$-out-of-$n$:G load sharing system is a cluster of $n$ components designed to withstand a certain amount of load in field operation, working only if no fewer than $k$ components work. Previous research on a load sharing system has focused on predicting the time-independent reliability from the stress–strength model or estimating the unknown parameters of the time-dependent reliability for a given load sharing rule. Differently, in this paper, we consider the problem of determining the optimal $n$ to maximize the reliability of both $n$-out-of-$n$:G and ($n$–$1$)-out-of-$n$:G load sharing systems. Since the load of each component decreases in $n$, the proportional hazard model is employed to relate the component failure rate with the load, assuming that the components, which have exponential distributions for given loads, are independent of each other. We then derive a sufficient condition under which a smaller number of components each withstanding a high load is preferred to a larger number of components each withstanding a small load. A numerical example is given for the rocket propulsion system to illustrate the result.     

A Sensitivity Analysis for System Reliability

In terms of the relationship between the lower confidence limits of reliabilities for system and component, using the finite Markov chain imbedding approach, we analyze the sensitivity of reliability for a linear consecutive-k-out-of-n:F system, a circular consecutive-k-out-of-n:F system, and a k-within-consecutive-r-out-of-n:F system. The analysis is based on two parameters: the number of experiments and the number of failed components.     

A Note on the Regression of Order Statistics

This paper examines the relationships between the mean residual life functions of parallel and k-out-of-n systems with the regression of order statistics. Using these relationships, the results and properties about the mean residual life function of those systems can be used for the regression of order statistics and vice versa. Finally, the paper proposes a definition for the mean residual life function of a k-out-of-n system when the number of failed components of the system is known.     

Reliability analysis of consecutive k-out-of-n systems with non-identical components lifetimes

In recent years, the study of reliability properties of consecutive k-out-of-n systems has attracted a great deal of attention from both theoretical and practical perspectives. In this paper we consider linear and circular consecutive k-out-of-n systems. It is assumed that lifetimes of components of the systems are independent but their probability distributions are non-identical. We study the reliability properties of the residual lifetimes of such systems under the condition that at least (n−r+1), r≤n, components of the system are operating. We also investigate the probability that a specific number of components of the above-mentioned system operate at time t, t>0, under the condition that the system is alive at time t.     

Allocating Redundancies to k-out-of-n Systems with Independent and Heterogeneous Components

This paper studies the allocation of independent redundancies with a common life distribution to k-out-of-n systems of independent components with non identical life distributions. A sufficient condition is found for allocating more active redundancies to the weaker component to gain a larger lifetime for k-out-of-n systems, and assigning more standby redundancies to the weaker (stronger) components is proved to yield larger lifetime for series (parallel) systems in the sense of the increasing concave (convex) order. Also, the optimal policy is proved to be majorized by all other policies when the system’s components are stochastically ordered.     

On the Mean Remaining Strength of the k-Out-of-n:F System with Exchangeable Components

In this article, we consider the mean remaining strength of a k-out-of-n:F system in the stress–strength setup for the exchangeable components. We provide some results for parallel and series systems under this setup, where X₁, X₂, …, X_n are the strengths of the components designed under the common stress. An illustrative example is given for the k-out-of- n:F system using the multivariate FGM distribution.