Conditional VAR and Expected Shortfall: A New Functional Approach

We estimate two well-known risk measures, the value-at-risk (VAR) and the expected shortfall, conditionally to a functional variable (i.e., a random variable valued in some semi(pseudo)-metric space). We use nonparametric kernel estimation for constructing estimators of these quantities, under general dependence conditions. Theoretical properties are stated whereas practical aspects are illustrated on simulated data: nonlinear functional and GARCH(1,1) models. Some ideas on bandwidth selection using bootstrap are introduced. Finally, an empirical example is given through data of the S&P 500 time series.     

Modelling beyond regression functions: an application of multimodal regression to speed–flow data

Summary.  For speed–flow data, which are intensively discussed in transportation science, common nonparametric regression models of the type y = m ( x )+noise turn out to be inadequate since simple functional models cannot capture the essential relationship between the predictor and response. Instead a more general setting is required, allowing for multifunctions rather than functions. The tool proposed is conditional modes estimation which, in the form of local modes, yields several branches that correspond to the local modes. A simple algorithm for computing the branches is derived. This is based on a conditional mean shift algorithm and is shown to work well in the application that is considered.     

Bootstrap Prediction Intervals for Factor Models

We propose bootstrap prediction intervals for an observation h periods into the future and its conditional mean. We assume that these forecasts are made using a set of factors extracted from a large panel of variables. Because we treat these factors as latent, our forecasts depend both on estimated factors and estimated regression coefficients. Under regularity conditions, asymptotic intervals have been shown to be valid under Gaussianity of the innovations. The bootstrap allows us to relax this assumption and to construct valid prediction intervals under more general conditions. Moreover, even under Gaussianity, the bootstrap leads to more accurate intervals in cases where the cross-sectional dimension is relatively small as it reduces the bias of the ordinary least-squares (OLS) estimator.     

Asymptotic Results of a Nonparametric Conditional Quantile Estimator for Functional Time Series

We consider the estimation of the conditional quantile function when the covariates take values in some abstract function space. The main goal of this article is to establish the almost complete convergence and the asymptotic normality of the kernel estimator of the conditional quantile under the α-mixing assumption and on the concentration properties on small balls of the probability measure of the functional regressors. Some applications and particular cases are studied. This approach can be applied in time series analysis to the prediction and building of confidence bands. We illustrate our methodology with El Niño data.     

Some Observations on Copula Regression Functions

ABSTRACT

The main objective of this article is to introduce an alternative way of looking at regression analysis by using copulas. To achieve our objective we work on copula regression function, study its properties, and discuss advantages that will come out from our approach.     

Is It Always Necessary to Take Sample Selection into Account?

We compare a simple ordinary least squares (OLS) with the maximum likelihood estimation of the Tobit I and Tobit II regression models, in the selected sample. We propose a new measure to quantify the performance of OLS.     

基于尾部指数回归方法的CVaR估计以及实证研究

 在险价值VaR是一种非常重要的金融风险度量方法,近期也有很多关于动态VaR以及条件VaR (CVaR) 等方面的研究。根据金融资产的收益率具有重尾特征这一事实,本文假定金融资产收益率服从重尾分布,并假定重尾分布的尾部指数随着收益率发生变化。本文基于尾部指数回归模型对重尾分布的尾部指数进行估计,进而得到收益率尾部数据所服从的条件分布,并首次运用该方法对条件VaR进行估计。本文对沪深300指数进行了实证研究,得到CVaR的估计,并对估计得到的CVaR的预测效果作出检验,并与传统VaR估计方法进行了对比,实证结果发现本文的方法的预测效果更好。     

Non Parametric Regression Quantile Estimation for Dependent Functional Data under Random Censorship: Asymptotic Normality

In this paper we study a smooth estimator of the regression quantile function in the censorship model when the covariates take values in some abstract function space. The main goal of this paper is to establish the asymptotic normality of the kernel estimator of the regression quantile, under α-mixing condition and, on the concentration properties on small balls probability measure of the functional regressors. Some applications and particular cases are studied. This study can be applied in time series analysis to the prediction and building confidence bands. Some simulations are drawn to lend further support to our theoretical results and to compare the quality of behavior of the estimator for finite samples with different rates of censoring and sizes.     

An Equivalence of Conditional and Unconditional Maximum Likelihood Estimators via Infinite Replication of Observations

Motivated by an application with complex survey data, we show that for logistic regression with a simple matched-pairs design, infinitely replicating observations and maximizing the conditional likelihood results in an estimator exactly identical to the unconditional maximum likelihood estimator based on the original sample, which is inconsistent. Therefore, applying conditional likelihood methods to a pseudosample with observations replicated a large number of times can lead to an inconsistent estimator; this casts doubt on one possible approach to conditional logistic regression with complex survey data. We speculate that for more general designs, an asymptotic equivalence holds.     

Robust parameter estimation of regression model with AR(p) error terms

In this article, we consider a linear regression model with AR(p) error terms with the assumption that the error terms have a t distribution as a heavy-tailed alternative to the normal distribution. We obtain the estimators for the model parameters by using the conditional maximum likelihood (CML) method. We conduct an iteratively reweighting algorithm (IRA) to find the estimates for the parameters of interest. We provide a simulation study and three real data examples to illustrate the performance of the proposed robust estimators based on t distribution.     

Chapter Notes

Tests for redundancy of variables in linear two-group discriminant analysis are well known and frequently used. We give a survey of similar tests, including the one-sample T ² as a special case, in the situation in which only the mean vector (but no covariance matrix) is available in one sample. Then we show that a relation between linear regression and discriminant functions found by Fisher (1936) can be generalized to this situation. Relating regression and discriminant analysis to a multivariate linear model sheds more light on the relationship between them. Practical and didactical advantages of the regression approach to T ² tests and discriminant analysis are outlined.     

Nonparametric regression for functional data: Automatic smoothing parameter selection

We study regression estimation when the explanatory variable is functional. Nonparametric estimates of the regression operator have been recently introduced. They depend on a smoothing factor which controls its behavior, and the aim of our work is to construct some data-driven criterion for choosing this smoothing parameter. The criterion can be formulated in terms of a functional version of cross-validation ideas. Under mild assumptions on the unknown regression operator, it is seen that this rule is asymptotically optimal. As by-products of this result, we state some asymptotic equivalences for several measures of accuracy for nonparametric estimate of the regression operator. We also present general inequalities for bounding moments of random sums involving functional variables. Finally, a short simulation study is carried out to illustrate the behavior of our method for finite samples.     

Predictive assessment of copula models

Copulas are powerful explanatory tools for studying dependence patterns in multivariate data. While the primary use of copula models is in multivariate dependence modelling, they also offer predictive value for regression analysis. This article investigates the utility of copula models for model‐based predictions from two angles. We assess whether, where, and by how much various copula models differ in their predictions of a conditional mean and conditional quantiles. From a model selection perspective, we then evaluate the predictive discrepancy between copula models using in‐sample and out‐of‐sample predictions both in bivariate and higher‐dimensional settings. Our findings suggest that some copula models are more difficult to distinguish in terms of their overall predictive power than others, and depending on the quantity of interest, the differences in predictions can be detected only in some targeted regions. The situations where copula‐based regression approaches would be advantageous over traditional ones are discussed using simulated and real data. The Canadian Journal of Statistics 47: 8–26; 2019 © 2018 Statistical Society of Canada     

无条件分位数回归：文献综述与应用实例

条件分位数回归(conditional quantile regression,CQR)方法已成为经济学实证研究的常用方法之一。由于CQR结果的经济学阐释基于过多甚至是不必要的控制变量,这与人们所关心的问题有可能并不一致。例如,在劳动经济学对教育回报的研究中,无论个体的年龄,性别与家庭特征如何,教育程度对于个人收入的异质性影响是人们关注的重点,即人们想了解收入关于教育程度的无条件分位数估计。本文旨在介绍近年来发展起来的无条件分位数回归(unconditional quantile regression,UQR)技术并梳理相关文献。特别地,本文介绍三种重要的无条件分位数回归模型：Firpo, Fortin和Lemieux(2009)提出的的再中心化影响函数(recentered influence function, RIF) 回归,Frolich和Melly(2010)提出的无条件分位数处理效应模型与Powell(2010)提出的一般无条件分位数回归。另外,论文还运用一个研究居民收入分配格局变化对其医疗支出影响的实例详细说明了新方法的应用。     

Goodness‐of‐fit methods for matched case‐control studies

The authors propose graphical and numerical methods for checking the adequacy of the logistic regression model for matched case‐control data. Their approach is based on the cumulative sum of residuals over the covariate or linear predictor. Under the assumed model, the cumulative residual process converges weakly to a centered Gaussian limit whose distribution can be approximated via computer simulation. The observed cumulative residual pattern can then be compared both visually and analytically to a certain number of simulated realizations of the approximate limiting process under the null hypothesis. The proposed techniques allow one to check the functional form of each covariate, the logistic link function as well as the overall model adequacy. The authors assess the performance of the proposed methods through simulation studies and illustrate them using data from a cardiovascular study.     

Asymptotic normality of locally modelled regression estimator for functional data

We focus on the nonparametric regression of a scalar response on a functional explanatory variable. As an alternative to the well-known Nadaraya-Watson estimator for regression function in this framework, the locally modelled regression estimator performs very well [cf. [Barrientos-Marin, J., Ferraty, F., and Vieu, P. (2010), ‘Locally Modelled Regression and Functional Data’, Journal of Nonparametric Statistics, 22, 617–632]. In this paper, the asymptotic properties of locally modelled regression estimator for functional data are considered. The mean-squared convergence as well as asymptotic normality for the estimator are established. We also adapt the empirical likelihood method to construct the point-wise confidence intervals for the regression function and derive the Wilk's phenomenon for the empirical likelihood inference. Furthermore, a simulation study is presented to illustrate our theoretical results.     

A note on functional linear regression

This work focuses on the linear regression model with functional covariate and scalar response. We compare the performance of two (parametric) linear regression estimators and a nonparametric (kernel) estimator via a Monte Carlo simulation study and the analysis of two real data sets. The first linear estimator expands the predictor and the regression weight function in terms of the trigonometric basis, while the second one uses functional principal components. The choice of the regularization degree in the linear estimators is addressed.     

Robust group-Lasso for functional regression model

In this article, we consider the problem of selecting functional variables using the L1 regularization in a functional linear regression model with a scalar response and functional predictors, in the presence of outliers. Since the LASSO is a special case of the penalized least-square regression with L1 penalty function, it suffers from the heavy-tailed errors and/or outliers in data. Recently, Least Absolute Deviation (LAD) and the LASSO methods have been combined (the LAD-LASSO regression method) to carry out robust parameter estimation and variable selection simultaneously for a multiple linear regression model. However, variable selection of the functional predictors based on LASSO fails since multiple parameters exist for a functional predictor. Therefore, group LASSO is used for selecting functional predictors since group LASSO selects grouped variables rather than individual variables. In this study, we propose a robust functional predictor selection method, the LAD-group LASSO, for a functional linear regression model with a scalar response and functional predictors. We illustrate the performance of the LAD-group LASSO on both simulated and real data.     

Markov-switching generalized additive models

We consider Markov-switching regression models, i.e. models for time series regression analyses where the functional relationship between covariates and response is subject to regime switching controlled by an unobservable Markov chain. Building on the powerful hidden Markov model machinery and the methods for penalized B-splines routinely used in regression analyses, we develop a framework for nonparametrically estimating the functional form of the effect of the covariates in such a regression model, assuming an additive structure of the predictor. The resulting class of Markov-switching generalized additive models is immensely flexible, and contains as special cases the common parametric Markov-switching regression models and also generalized additive and generalized linear models. The feasibility of the suggested maximum penalized likelihood approach is demonstrated by simulation. We further illustrate the approach using two real data applications, modelling (i) how sales data depend on advertising spending and (ii) how energy price in Spain depends on the Euro/Dollar exchange rate.     

Residual Kriging for Functional Spatial Prediction of Salinity Curves

Recently, several methodologies to perform geostatistical analysis of functional data have been proposed. All of them assume that the spatial functional process considered is stationary. However, in practice, we often have nonstationary functional data because there exists an explicit spatial trend in the mean. Here, we propose a methodology to extend kriging predictors for functional data to the case where the mean function is not constant through the region of interest. We consider an approach based on the classical residual kriging method used in univariate geostatistics. We propose a three steps procedure. Initially, a functional regression model is used to detrend the mean. Then we apply kriging methods for functional data to the regression residuals to predict a residual curve at a non-data location. Finally, the prediction curve is obtained as the sum of the trend and the residual prediction. We apply the methodology to salinity data corresponding to 21 salinity curves recorded at the Ciénaga Grande de Santa Marta estuary, located in the Caribbean coast of Colombia. A cross-validation analysis was carried out to track the performance of the proposed methodology.