Copula-Based Bivariate ZIP Control Chart for Monitoring Rare Events

One difficulty with developing multivariate attribute control charts is the lack of the related joint distribution. So, if it would be possible to generate the joint distribution of two (or more) attribute characteristics, then a bivaraite (or multivariate) attribute control chart can be developed based on Types I and II errors. Copula function is a solution to the matter. In this article, applying the copula function approach, we achieve the joint distribution of two correlated zero inflated Poisson (ZIP) distributions. Then, using this joint distribution, we develop a bivaraite control chart which can be used for monitoring correlated rare events. This copula-based bivariate ZIP control chart is compared with the simultaneous use of two separate univariate ZIP control charts. Based on the average run length (ARL) measure, it is shown that the proposed control chart is much better than the simultaneous use of two separate univariate charts. In addition, a real case study related to the environmental air in a sterilization process is investigated to show the applicability of the developed control chart.     

A mixed GWMA–CUSUM control chart for monitoring the process mean

The memory-type control charts are widely used in the process and service industries for monitoring the production processes. The reason is their sensitivity to quickly react against the small process disturbances. Recently, a new cumulative sum (CUSUM) chart has been proposed that uses the exponentially weighted moving average (EWMA) statistic, called the EWMA–CUSUM chart. Similarly, in order to further enhance the sensitivity of the EWMA–CUSUM chart, we propose a new CUSUM chart using the generally weighted moving average (GWMA) statistic, called the GWMA–CUSUM chart, for efficiently monitoring the process mean. The GWMA–CUSUM chart encompasses the existing CUSUM and EWMA–CUSUM charts. Extensive Monte Carlo simulations are used to explore the run length profiles of the GWMA–CUSUM chart. Based on comprehensive run length comparisons, it turns out that the GWMA–CUSUM chart performs substantially better than the CUSUM, EWMA, GWMA, and EWMA–CUSUM charts when detecting small shifts in the process mean. An illustrative example is also presented to explain the implementation and working of the EWMA–CUSUM and GWMA–CUSUM charts.     

Data-analytic aspects of the Shiryayev-Roberts control chart: surveillance of a non-homogeneous Poisson process

The Shiryayev-Roberts control chart has been proposed as a powerful competitor of the Shewhart control chart and the CUSUM procedure, on theoretical grounds. We demonstrate here the application of a Shiryayev-Roberts control chart to a non-homogeneous Poisson process. We show that, from a data-analytic point of view, the Shiryayev-Roberts surveillance scheme has several advantages over classical CUSUM charts. A case study of power failure times in a computer centre is used to illustrate our main points.     

Monitoring parameter shift with Poisson integer-valued GARCH models

This study examines the statistical process control chart used to detect a parameter shift with Poisson integer-valued GARCH (INGARCH) models and zero-inflated Poisson INGARCH models. INGARCH models have a conditional mean structure similar to GARCH models and are well known to be appropriate to analyzing count data that feature overdispersion. Special attention is paid in this study to conditional and general likelihood ratio-based (CLR and GLR) CUSUM charts and the score function-based CUSUM (SFCUSUM) chart. The performance of each of the proposed methods is evaluated through a simulation study, by calculating their average run length. Our findings show that the proposed methods perform adequately, and that the CLR chart outperforms the GLR chart when there is an increased shift of parameters. Moreover, the use of the SFCUSUM chart in particular is found to lead to a lower false alarm rate than the use of the CLR chart.     

A new adaptive EWMA control chart using auxiliary information for monitoring the process mean

The adaptive memory-type control charts, including the adaptive exponentially weighted moving average (EWMA) and cumulative sum (CUSUM) charts, have gained considerable attention because of their excellent speed in providing overall good detection over a range of mean shift sizes. In this paper, we propose a new adaptive EWMA (AEWMA) chart using the auxiliary information for efficiently monitoring the infrequent changes in the process mean. The idea is to first estimate the unknown process mean shift using an auxiliary information based mean estimator, and then adaptively update the smoothing constant of the EWMA chart. Using extensive Monte Carlo simulations, the run length profiles of the AEWMA chart are computed and explored. The AEWMA chart is compared with the existing control charts, including the classical EWMA, CUSUM, synthetic EWMA and synthetic CUSUM charts, in terms of the run length characteristics. It turns out that the AEWMA chart performs uniformly better than these control charts when detecting a range of mean shift sizes. An illustrative example is also presented to demonstrate the working and implementation of the proposed and existing control charts.     

Conditional design of the CUSUM median chart for the process position when process parameters are unknown

In practice, different practitioners will use different Phase I samples to estimate the process parameters, which will lead to different Phase II control chart's performance. Researches refer to this variability as between-practitioners-variability of control charts. Since between-practitioners-variability is important in the design of the CUSUM median chart with estimated process parameters, the standard deviation of average run length (SDARL) will be used to study its properties. It is shown that the CUSUM median chart requires a larger amount of Phase I samples to sufficiently reduce the variation in the in-control ARL of the CUSUM median chart. Considering the limitation of the amount of the Phase I samples, a bootstrap approach is also used here to adjust the control limits of the CUSUM median chart. Comparisons are made for the CUSUM and Shewhart median charts with estimated parameters when using the adjusted- and unadjusted control limits and some conclusions are made.     

Measurement error effect on the CUSUM control chart

The performance of the cumulative sum (CUSUM) control chart for the mean when measurement error exists is investigated. It is shown that the CUSUM chart is greatly affected by the measurement error. A similar result holds for the case of the CUSUM chart for the mean with linearly increasing variance. In this paper, we consider multiple measurements to reduce the effect of measurement error on the charts performance. Finally, a comparison of the CUSUM and EWMA charts is presented and certain recommendations are given.     

A window-limited generalized likelihood ratio test for monitoring Poisson processes with linear drifts

There is gradually increasing attention devoted to the monitoring of Poisson process due to its wide applications in industry quality control and health-care surveillance. However, most of the study focuses on the case with step shifts in Poisson means. Relatively little attention has been paid to the case with linear drifts in Poisson means. This paper extends the window-limited generalized likelihood ratio (WGLR) test from the monitoring of normal means to Poisson processes, with focus on linear drifts. The comparison results with the adaptive cumulative sum (ACUSUM) charts and the weighted CUSUM (WCUSUM) charts show that the WGLR chart generally provides better detection performance than the other alternative methods in both the zero-state and steady-state cases.     

Enhanced adaptive CUSUM charts for process mean

A statistical quality control chart is an important tool of the statistical process control, which is widely used to control and monitor a production process. The CUSUM chart is designed to detect a specific shift, provided that the shift size is known in advance. In practice, however, shift sizes are rarely known. It is then customary to use an adaptive CUSUM chart, which can effectively detect a range of shift sizes. In this paper, we enhance the sensitivities of the improved adaptive CUSUM mean charts using an auxiliary-information-based (AIB) mean estimator. The run length performances of the proposed charts are compared with those of the AIB adaptive and non-adaptive CUSUM charts in terms of the average run length (ARL), extra quadratic loss, and integral relative ARL. These run length comparisons reveal that the proposed charts are more sensitive than the existing charts when detecting different kinds of shift in the process mean. An example is given to demonstrate the implementation of existing and proposed charts.     

Optimal CUSUM and adaptive CUSUM charts with auxiliary information for process mean

The CUSUM chart is good enough to detect small-to-moderate shifts in the process parameter(s) as it can be optimally designed to detect a particular shift size. The adaptive CUSUM (ACUSUM) chart provides good detection over a range of shift sizes because of its ability to update the reference parameter using the estimated process shift. In this paper, we propose auxiliary-information-based (AIB) optimal CUSUM (OCUSUM) and ACUSUM charts, named AIB-OCUSUM and AIB-ACUSUM charts, using a difference estimator of the process mean. The performance comparisons between existing and proposed charts are made in terms of the average run length (ARL), extra quadratic loss and integral relative ARL measures. It is found that the AIB-OCUSUM and AIB-ACUSUM charts are more sensitive than the AIB-CUSUM and ACUSUM charts, respectively. Moreover, the AIB-ACUSUM chart surpasses the AIB-OCUSUM chart when detecting a range of mean shift sizes. Illustrative examples are given to support the theory.     

Comparison of different control charts for a Weibull process with type-I censoring

Some control charts have been proposed to monitor the mean of a Weibull process with type-I censoring. One type of control charts is to monitor changes in the scale parameter because it indicates changes in the mean. With this approach, we compare different control charts such as Shewhart-type and exponentially weighted moving average (EWMA) charts based on conditional expected value (CEV) and cumulative sum (CUSUM) chart based on likelihood-ratio. A simulation approach is employed to compute control limits and average run lengths. The results show that the CUSUM chart has the best performance. However, the EWMA-CEV chart is recommendable for practitioners with its competitive performance and ease of use advantage. An illustrative example is also provided.     

On increasing the sensitivity of mixed EWMA–CUSUM control charts for location parameter

Control chart is an important statistical technique that is used to monitor the quality of a process. Shewhart control charts are used to detect larger disturbances in the process parameters, whereas cumulative sum (CUSUM) and exponential weighted moving average (EWMA) are meant for smaller and moderate changes. In this study, we enhanced mixed EWMA–CUSUM control charts with varying fast initial response (FIR) features and also with a runs rule of two out of three successive points that fall above the upper control limit. We investigate their run-length properties. The proposed control charting schemes are compared with the existing counterparts including classical CUSUM, classical EWMA, FIR CUSUM, FIR EWMA, mixed EWMA–CUSUM, 2/3 modified EWMA, and 2/3 CUSUM control charting schemes. A case study is presented for practical considerations using a real data set.     

A HEWMA-CUSUM control chart for the Weibull distribution

The Weibull distribution is one of the most popular distributions for lifetime modeling. However, there has not been much research on control charts for a Weibull distribution. Shewhart control is known to be inefficient to detect a small shift in the process, while exponentially weighted moving average (EWMA) and cumulative sum control chart (CUSUM) charts have the ability to detect small changes in the process. To enhance the performance of a control chart for a Weibull distribution, we introduce a new control chart based on hybrid EWMA and CUSUM statistic, called the HEWMA-CUSUM chart. The performance of the proposed chart is compared with the existing chart in terms of the average run length (ARL). The proposed chart is found to be more sensitive than the existing chart in ARL. A simulation study is provided for illustration purposes. A real data is also applied to the proposed chart for practical use.     

Evaluation of control charts under linear trend

The performance of several control charting schemes is studied when the process mean changes as a linear trend. The control charts considered include the Shewhart chart, the Shewhart chart supplemented with runs rules, the cumulative sum (CUSUM) chart, the exponentially weighted moving average (EWMA) chart, and a generalized control chart.     

Distribution-Free Exceedance CUSUM Control Charts for Location

Distribution-free (nonparametric) control charts can be useful to the quality practitioner when the underlying distribution is not known. A Phase II nonparametric cumulative sum (CUSUM) chart based on the exceedance statistics, called the exceedance CUSUM chart, is proposed here for detecting a shift in the unknown location parameter of a continuous distribution. The exceedance statistics can be more efficient than rank-based methods when the underlying distribution is heavy-tailed and/or right-skewed, which may be the case in some applications, particularly with certain lifetime data. Moreover, exceedance statistics can save testing time and resources as they can be applied as soon as a certain order statistic of the reference sample is available. Guidelines and recommendations are provided for the chart's design parameters along with an illustrative example. The in- and out-of-control performances of the chart are studied through extensive simulations on the basis of the average run-length (ARL), the standard deviation of run-length (SDRL), the median run-length (MDRL), and some percentiles of run-length. Further, a comparison with a number of existing control charts, including the parametric CUSUM chart and a recent nonparametric CUSUM chart based on the Wilcoxon rank-sum statistic, called the rank-sum CUSUM chart, is made. It is seen that the exceedance CUSUM chart performs well in many cases and thus can be a useful alternative chart in practice. A summary and some concluding remarks are given.     

Weighted adaptive multivariate CUSUM charts with variable sampling intervals

The adaptive multivariate CUSUM (AMCUSUM) chart has received considerable attention because of its superior sensitivity against a range of mean shift sizes than that of the conventional non-adaptive multivariate CUSUM (MCUSUM) chart. Recently, weighted AMCUSUM (WAMCUSUM) charts with a fixed sampling interval (FSI) have been proposed, called the WAMCUSUM-FSI charts, which provide more sensitivity than the AMCUSUM-FSI charts. In this paper, we extend this work and propose WAMCUSUM charts with variable sampling interval (VSI), named the WAMCUSUM-VSI charts, for efficiently monitoring the mean of a multivariate normally distributed process. The Monte Carlo simulation method is used to compute the average time to signal (ATS) and the adjusted ATS (AATS) profiles of the existing and proposed charts. It is found that the WAMCUSUM-VSI charts perform substantially and nearly uniformly better than the WAMCUSUM-FSI charts in terms of the ATS and AATS performance criterion. An example is given to explain the implementation of the WAMCUSUM charts with fixed and VSIs.     

Average run lengths for cusum control charts applied to residuals

A common approach to building control charts for autocorrelated data is to apply classical SPC to the residuals from a time series model of the process. However, Shewhart charts and even CUSUM charts are less sensitive to small shifts in the process mean when applied to residuals than when applied to independent data. Using an approximate analytical model, we show that the average run length of a CUSUM chart for residuals can be reduced substantially by modifying traditional chart design guidelines to account for the degree of autocorrelation in the data.     

Fast Initial Response Features for Poisson GWMA Control Charts

The Poisson GWMA (PGWMA) control chart is an extension model of Poisson EWMA chart. It is substantially sensitive to small process shifts for monitoring Poisson observations. Recently, some approaches have been proposed to modify EWMA charts with fast initial response (FIR) features. In this article, we employ these approaches in PGWMA charts and introduce a novel chart called Poisson double GWMA (PDGWMA) chart for comparison. Using simulation, various control schemes are designed and their average run lengths (ARLs) are computer and compared. It is shown that the PDGWMA chart is the first choice in detecting small shifts especially when the shifts are downward, and the PGWMA chart with adjusted time-varying control limits performs excellently in detecting great process shifts during the initial stage.     

Statistical control charts for monitoring the mean of a stationary process

Recently statistical process control (SPC) methodologies have been developed to accommodate autocorrelated data. A primary method to deal with autocorrelated data is the use of residual charts. Although this methodology has the advantage that it can be applied to any autocorrelated data it needs time series modeling efforts. In addition for a X residual chart the detection capability is sometimes small compared to the X chart and EWMA chart. Zhang (1998) proposed the EWMAST chart which is constructed by charting the EWMA statistic for stationary processes to monitor the process mean. The performance of the EWMAST chart the X chart the X residual chart and other charts were compared in Zhang (1998). In this paper comparisons are made among the EWMAST chart the CUSUM residual chart and EWMA residual chart as well as the X residual chart and X chart via the average run length.