Local polynomial regression and simulation–extrapolation

Summary.  The paper introduces a new local polynomial estimator and develops supporting asymptotic theory for nonparametric regression in the presence of covariate measurement error. We address the measurement error with Cook and Stefanski's simulation–extrapolation (SIMEX) algorithm. Our method improves on previous local polynomial estimators for this problem by using a bandwidth selection procedure that addresses SIMEX's particular estimation method and considers higher degree local polynomial estimators. We illustrate the accuracy of our asymptotic expressions with a Monte Carlo study, compare our method with other estimators with a second set of Monte Carlo simulations and apply our method to a data set from nutritional epidemiology. SIMEX was originally developed for parametric models. Although SIMEX is, in principle, applicable to nonparametric models, a serious problem arises with SIMEX in nonparametric situations. The problem is that smoothing parameter selectors that are developed for data without measurement error are no longer appropriate and can result in considerable undersmoothing. We believe that this is the first paper to address this difficulty.     

On correcting measurement error in the persistence rate estimator

In the field of education, it is often of great interest to estimate the percentage of students who start out in the top test quantile at time 1 and who remain there at time 2, which is termed as “persistence rate,” to measure the students’ academic growth. One common difficulty is that students’ performance may be subject to measurement errors. We therefore considered a correlation calibration method and the simulation–extrapolation (SIMEX) method for correcting the measurement errors. Simulation studies are presented to compare various measurement error correction methods in estimating the persistence rate.     

Simulation-Extrapolation via the Bezier Curve in Measurement Error Models

Simulation-extrapolation (SIMEX) is a method for correcting for bias in measurement error models, and parametric SIMEX estimates are often used. In this paper, we propose a nonparametric method for computing the SIMEX estimate via the Bezier curve, which is a popular smoothing technique in the computer graphics area. Comparisons are done for the bias of the limit values of parametric SIMEX estimates and the Bezier estimate in the various nonlinear measurement error models.     

A Semiparametric Approach for Accelerated Failure Time Models with Covariates Subject to Measurement Error

There are relatively few discussions about measurement error in the accelerated failure time (AFT) model, particularly for the semiparametric AFT model. In this article, we propose an adjusted estimation procedure for the semiparametric AFT model with covariates subject to measurement error, based on the profile likelihood approach and simulation and exploration (SIMEX) method. The simulation studies show that the proposed semiparametric SIMEX approach performs well. The proposed approach is applied to a coronary heart disease dataset from the Busselton Health study for illustration.     

An Empirical Comparison of Estimating Methods for the Ramberg–Osgood EIV Model

The standard tensile test is one of the most frequent tools performed for the evaluation of mechanical properties of metals. An empirical model proposed by Ramberg and Osgood fits the tensile test data using a nonlinear model for the strain in terms of the stress. It is an Error-In-Variables (EIV) model because of the uncertainty affecting both strain and stress measurement instruments. The SIMEX, a simulation-based method for the estimation of model parameters, is powerful in order to reduce bias due to the measurement error in EIV models. The plan of this article is the following. In Sec. 2, we introduce the Ramberg–Osgood model and another reparametrization according to different assumptions on the independent variable. In Sec. 3, there is a summary of SIMEX method for the case at hand. Section 4 is a comparison between SIMEX and others estimating methods in order to highlight the peculiarities of the different approaches. In the last section, there are some concluding remarks.     

R package for analysis of data with mixed measurement error and misclassification in covariates: augSIMEX

Measurement error and misclassification arise commonly in various data collection processes. It is well-known that ignoring these features in the data analysis usually leads to biased inference. With the generalized linear model setting, Yi et al. [Functional and structural methods with mixed measurement error and misclassification in covariates. J Am Stat Assoc. 2015;110:681–696] developed inference methods to adjust for the effects of measurement error in continuous covariates and misclassification in discrete covariates simultaneously for the scenario where validation data are available. The augmented simulation-extrapolation (SIMEX) approach they developed generalizes the usual SIMEX method which is only applicable to handle continuous error-prone covariates. To implement this method, we develop an R package, augSIMEX, for public use. Simulation studies are conducted to illustrate the use of the algorithm. This package is available at CRAN.     

SIMEX estimation in case of correlated measurement errors

The simulation-extrapolation (SIMEX) approach of Cook and Stefanski (J. Am. Stat. Assoc. 89:1314–1328, 1994) has proved to be successful in obtaining reliable estimates if variables are measured with (additive) errors. In particular for nonlinear models, this approach has advantages compared to other procedures such as the instrumental variable approach if only variables measured with error are available. However, it has always been assumed that measurement errors for the dependent variable are not correlated with those related to the explanatory variables although such scenario is quite likely. In such a case the (standard) SIMEX suffers from misspecification even for the simple linear regression model. Our paper reports first results from a generalized SIMEX (GSIMEX) approach which takes account of this correlation. We also demonstrate in our simulation study that neglect of the correlation will lead to estimates which may be worse than those from the naive estimator which completely disregards measurement errors.     

Quantile regression estimation for distortion measurement error data

We study the quantile estimation methods for the distortion measurement error data when variables are unobserved and distorted with additive errors by some unknown functions of an observable confounding variable. After calibrating the error-prone variables, we propose the quantile regression estimation procedure and composite quantile estimation procedure. Asymptotic properties of the proposed estimators are established, and we also investigate the asymptotic relative efficiency compared with the least-squares estimator. Simulation studies are conducted to evaluate the performance of the proposed methods, and a real dataset is analyzed as an illustration.     

Bayesian Semiparametric Modelling in Quantile Regression

Abstract. We propose a Bayesian semiparametric methodology for quantile regression modelling. In particular, working with parametric quantile regression functions, we develop Dirichlet process mixture models for the error distribution in an additive quantile regression formulation. The proposed non‐parametric prior probability models allow the shape of the error density to adapt to the data and thus provide more reliable predictive inference than models based on parametric error distributions. We consider extensions to quantile regression for data sets that include censored observations. Moreover, we employ dependent Dirichlet processes to develop quantile regression models that allow the error distribution to change non‐parametrically with the covariates. Posterior inference is implemented using Markov chain Monte Carlo methods. We assess and compare the performance of our models using both simulated and real data sets.     

Perturbation by multiplicative noise and the Simulation Extrapolation method

While most of the literature on measurement error focuses on additive measurement error, we consider in this paper the multiplicative case. We apply the Simulation Extrapolation method (SIMEX)—a procedure which was originally proposed by Cook and Stefanski (J. Am. Stat. Assoc. 89:1314–1328, 1994) in order to correct the bias due to additive measurement error—to the case where data are perturbed by multiplicative noise and present several approaches to account for multiplicative noise in the SIMEX procedure. Furthermore, we analyze how well these approaches reduce the bias caused by multiplicative perturbation. Using a binary probit model, we produce Monte Carlo evidence on how the reduction of data quality can be minimized. For helpful comments, we would like to thank Helmut Küchenhoff, Winfried Pohlmeier, and Gerd Ronning. Sandra Nolte gratefully acknowledges financial support by the DFG. Elena Biewen and Martin Rosemann gratefully acknowledge the financial support by the Federal Ministry of Education and Research (BMBF). The usual disclaimer applies.     

Estimation and variable selection for partially functional linear models

In this paper, a new estimation procedure based on composite quantile regression and functional principal component analysis (PCA) method is proposed for the partially functional linear regression models (PFLRMs). The proposed estimation method can simultaneously estimate both the parametric regression coefficients and functional coefficient components without specification of the error distributions. The proposed estimation method is shown to be more efficient empirically for non-normal random error, especially for Cauchy error, and almost as efficient for normal random errors. Furthermore, based on the proposed estimation procedure, we use the penalized composite quantile regression method to study variable selection for parametric part in the PFLRMs. Under certain regularity conditions, consistency, asymptotic normality, and Oracle property of the resulting estimators are derived. Simulation studies and a real data analysis are conducted to assess the finite sample performance of the proposed methods.     

Automatic Bayesian quantile regression curve fitting

Quantile regression, including median regression, as a more completed statistical model than mean regression, is now well known with its wide spread applications. Bayesian inference on quantile regression or Bayesian quantile regression has attracted much interest recently. Most of the existing researches in Bayesian quantile regression focus on parametric quantile regression, though there are discussions on different ways of modeling the model error by a parametric distribution named asymmetric Laplace distribution or by a nonparametric alternative named scale mixture asymmetric Laplace distribution. This paper discusses Bayesian inference for nonparametric quantile regression. This general approach fits quantile regression curves using piecewise polynomial functions with an unknown number of knots at unknown locations, all treated as parameters to be inferred through reversible jump Markov chain Monte Carlo (RJMCMC) of Green (Biometrika 82:711–732, 1995). Instead of drawing samples from the posterior, we use regression quantiles to create Markov chains for the estimation of the quantile curves. We also use approximate Bayesian factor in the inference. This method extends the work in automatic Bayesian mean curve fitting to quantile regression. Numerical results show that this Bayesian quantile smoothing technique is competitive with quantile regression/smoothing splines of He and Ng (Comput. Stat. 14:315–337, 1999) and P-splines (penalized splines) of Eilers and de Menezes (Bioinformatics 21(7):1146–1153, 2005).     

Bayesian spectral analysis models for quantile regression with Dirichlet process mixtures

This paper presents a Bayesian analysis of partially linear additive models for quantile regression. We develop a semiparametric Bayesian approach to quantile regression models using a spectral representation of the nonparametric regression functions and the Dirichlet process (DP) mixture for error distribution. We also consider Bayesian variable selection procedures for both parametric and nonparametric components in a partially linear additive model structure based on the Bayesian shrinkage priors via a stochastic search algorithm. Based on the proposed Bayesian semiparametric additive quantile regression model referred to as BSAQ, the Bayesian inference is considered for estimation and model selection. For the posterior computation, we design a simple and efficient Gibbs sampler based on a location-scale mixture of exponential and normal distributions for an asymmetric Laplace distribution, which facilitates the commonly used collapsed Gibbs sampling algorithms for the DP mixture models. Additionally, we discuss the asymptotic property of the sempiparametric quantile regression model in terms of consistency of posterior distribution. Simulation studies and real data application examples illustrate the proposed method and compare it with Bayesian quantile regression methods in the literature.     

Variable selection in quantile regression when the models have autoregressive errors

This paper considers a problem of variable selection in quantile regression with autoregressive errors. Recently, Wu and Liu (2009) investigated the oracle properties of the SCAD and adaptive-LASSO penalized quantile regressions under non identical but independent error assumption. We further relax the error assumptions so that the regression model can hold autoregressive errors, and then investigate theoretical properties for our proposed penalized quantile estimators under the relaxed assumption. Optimizing the objective function is often challenging because both quantile loss and penalty functions may be non-differentiable and/or non-concave. We adopt the concept of pseudo data by Oh et al. (2007) to implement a practical algorithm for the quantile estimate. In addition, we discuss the convergence property of the proposed algorithm. The performance of the proposed method is compared with those of the majorization-minimization algorithm (Hunter and Li, 2005) and the difference convex algorithm (Wu and Liu, 2009) through numerical and real examples.     

Bayesian variable selection and estimation in maximum entropy quantile regression

Quantile regression has gained increasing popularity as it provides richer information than the regular mean regression, and variable selection plays an important role in the quantile regression model building process, as it improves the prediction accuracy by choosing an appropriate subset of regression predictors. Unlike the traditional quantile regression, we consider the quantile as an unknown parameter and estimate it jointly with other regression coefficients. In particular, we adopt the Bayesian adaptive Lasso for the maximum entropy quantile regression. A flat prior is chosen for the quantile parameter due to the lack of information on it. The proposed method not only addresses the problem about which quantile would be the most probable one among all the candidates, but also reflects the inner relationship of the data through the estimated quantile. We develop an efficient Gibbs sampler algorithm and show that the performance of our proposed method is superior than the Bayesian adaptive Lasso and Bayesian Lasso through simulation studies and a real data analysis.     

Quantile regression in longitudinal studies with dropouts and measurement errors

ABSTRACT

Quantile regression models, as an important tool in practice, can describe effects of risk factors on the entire conditional distribution of the response variable with its estimates robust to outliers. However, there is few discussion on quantile regression for longitudinal data with both missing responses and measurement errors, which are commonly seen in practice. We develop a weighted and bias-corrected quantile loss function for the quantile regression with longitudinal data, which allows both missingness and measurement errors. Additionally, we establish the asymptotic properties of the proposed estimator. Simulation studies demonstrate the expected performance in correcting the bias resulted from missingness and measurement errors. Finally, we investigate the Lifestyle Education for Activity and Nutrition study and confirm the effective of intervention in producing weight loss after nine month at the high quantile.     

A variant of K nearest neighbor quantile regression

Compared with local polynomial quantile regression, K nearest neighbor quantile regression (KNNQR) has many advantages, such as not assuming smoothness of functions. The paper summarizes the research of KNNQR and has carried out further research on the selection of k, algorithm and Monte Carlo simulations. Additionally, simulated functions are Blocks, Bumps, HeaviSine and Doppler, which stand for jumping, volatility, mutagenicity slope and high frequency function. When function to be estimated has some jump points or catastrophe points, KNNQR is superior to local linear quantile regression in the sense of the mean squared error and mean absolute error criteria. To be mentioned, even high frequency, the superiority of KNNQR could be observed. A real data is analyzed as an illustration.     

Focused Information Criterion and Model Averaging in Quantile Regression

In this article, we study model selection and model averaging in quantile regression. Under general conditions, we develop a focused information criterion and a frequentist model average estimator for the parameters in quantile regression model, and examine their theoretical properties. The new procedures provide a robust alternative to the least squares method or likelihood method, and a major advantage of the proposed procedures is that when the variance of random error is infinite, the proposed procedure works beautifully while the least squares method breaks down. A simulation study and a real data example are presented to show that the proposed method performs well with a finite sample and is easy to use in practice.     

Quantile Regression Methods for Longitudinal Data with Drop-outs: Application to CD4 Cell Counts of Patients Infected with the Human Immunodeficiency Virus

Patients infected with the human immunodeficiency virus (HIV) generally experience a decline in their CD4 cell count (a count of certain white blood cells). We describe the use of quantile regression methods to analyse longitudinal data on CD4 cell counts from 1300 patients who participated in clinical trials that compared two therapeutic treatments: zidovudine and didanosine. It is of scientific interest to determine any treatment differences in the CD4 cell counts over a short treatment period. However, the analysis of the CD4 data is complicated by drop-outs: patients with lower CD4 cell counts at the base-line appear more likely to drop out at later measurement occasions. Motivated by this example, we describe the use of `weighted' estimating equations in quantile regression models for longitudinal data with drop-outs. In particular, the conventional estimating equations for the quantile regression parameters are weighted inversely proportionally to the probability of drop-out. This approach requires the process generating the missing data to be estimable but makes no assumptions about the distribution of the responses other than those imposed by the quantile regression model. This method yields consistent estimates of the quantile regression parameters provided that the model for drop-out has been correctly specified. The methodology proposed is applied to the CD4 cell count data and the results are compared with those obtained from an `unweighted' analysis. These results demonstrate how an analysis that fails to account for drop-outs can mislead.     

Nonparametric Inference for Time-Varying Coefficient Quantile Regression

The article considers nonparametric inference for quantile regression models with time-varying coefficients. The errors and covariates of the regression are assumed to belong to a general class of locally stationary processes and are allowed to be cross-dependent. Simultaneous confidence tubes (SCTs) and integrated squared difference tests (ISDTs) are proposed for simultaneous nonparametric inference of the latter models with asymptotically correct coverage probabilities and Type I error rates. Our methodologies are shown to possess certain asymptotically optimal properties. Furthermore, we propose an information criterion that performs consistent model selection for nonparametric quantile regression models of nonstationary time series. For implementation, a wild bootstrap procedure is proposed, which is shown to be robust to the dependent and nonstationary data structure. Our method is applied to studying the asymmetric and time-varying dynamic structures of the U.S. unemployment rate since the 1940s. Supplementary materials for this article are available online.