A Nonparametric Synthetic Control Chart Using Sign Statistic

This article presents a synthetic control chart for detection of shifts in the process median. The synthetic chart is a combination of sign chart and conforming run-length chart. The performance evaluation of the proposed chart indicates that the synthetic chart has a higher power of detecting shifts in process median than the Shewhart charts based on sign statistic as well as the classical Shewhart X-bar chart for various symmetric distributions. The improvement is significant for shifts of moderate to large shifts in the median. The robustness studies of the proposed synthetic control chart against outliers indicate that the proposed synthetic control chart is robust against contamination by outliers.     

A new synthetic control chart for monitoring process mean using auxiliary information

ABSTRACT

Quality control charts have been widely recognized as a potentially powerful statistical process monitoring tool in statistical process control because of their superior ability in detecting shifts in the process parameters. Recently, auxiliary-information-based control charts have been proposed and shown to have excellent speed in detecting process shifts than those based without it. In this paper, we design a new synthetic control chart that is based on a statistic that utilizes information from both the study and auxiliary variables. The proposed synthetic chart encompasses the classical synthetic chart. The construction, optimal design, run length profiles, and the performance evaluation of the new chart are discussed in detail. It turns out that the proposed synthetic chart performs uniformly better than the classical synthetic chart when detecting different kinds of shifts in the process mean under both zero-state and steady-state run length performances. Moreover, with reasonable assumptions, the proposed chart also surpasses the exponentially weighted moving average control chart. An application with a simulated data set is also presented to explain the implementation of the proposed control chart.     

Non parametric double generally weighted moving average sign charts based on process proportion

Non parametric control charts have received increasing attention in the field of statistical process control. This paper presents a non parametric double generally weighted moving average (DGWMA) sign chart for monitoring small deviations when the quality characteristics of a process are unknown. The statistical performance of the non parametric DGWMA sign chart is evaluated and compared with those of other charts, including the exponentially weighted moving average (EWMA), generally weighted moving average (GWMA), and double EWMA (DEWMA) sign charts. Simulation studies indicate that the non parametric DGWMA sign chart with a large design and median adjustment parameters is always more sensitive than other charts in detecting small changes.     

Economic statistical design of x ¥ control charts for systems with gamma ( 5 ,2) in-control times

In this paper, gamma ( 5 ,2) distribution is considered as a failure model for the economic statistical design of x ¥ control charts. The study shows that the statistical performance of control charts can be improved significantly, with only a slight increase in the cost, by adding constraints to the optimization problem. The use of an economic statistical design instead of an economic design results in control charts that may be less expensive to implement, that have lower false alarm rates, and that have a higher probability of detecting process shifts. Numerical examples are presented to support this proposition. The results of economic statistical design are compared with those of a pure economic design. The effects of adding constraints for statistical performance measures, such as Type I error rate and the power of the chart, are extensively investigated.     

Economic design of VSI X̄ control chart with correlated non-normal data under multiple assignable causes

It has been recently revealed that the Shewhart control charts with variable sampling interval (VSI) perform better than the traditional Shewhart chart with the fixed sampling interval in detecting shifts in the process. In most of these research works, the normality and independency of the process data or measurements are assumed and that the process is subjected to only one assignable cause. While, in practice, these assumptions usually do not hold, some recent studies are focused on working with only one or two of these violations. In this paper, the situation in which the process data are correlated and follow a non-normal distribution and that there is multiplicity of assignable causes in the process is considered. For this case, a cost model for the economic design of the VSI X? control chart is developed, where the Burr distribution is employed to represent the non-normal distribution of the process data. To obtain the optimal values of the design parameters, a genetic algorithm is employed in which the response surface methodology is applied. A numerical example is presented to show the applicability and effectiveness of the proposed methodology. Sensitivity analysis is also carried out to evaluate the effects of cost and input parameters on the performance of the chart.     

Economic statistical design of the T2 control chart under the Weibull shock model with multiple assignable causes

A proper monitoring of stochastic systems is the control charts of statistical process control and drift in characteristics of output may be due to one or several assignable causes. Although much research has been done on the design of control charts, the economic statistical design of the T2 control chart under the Weibull shock model with multiple assignable causes has not yet been addressed. Therefore, we tried to deal with it in this paper and thus we developed a cost model based on the variable sampling interval. We also give an example to support the practical use of T2 chart under the Weibull shock model with multiple assignable causes. Based on the optimization of the average cost per unit of time and taking into account the different combination values of Weibull distribution parameters, optimal values of design parameters were derived and calculated. Then, the cost models under the influence of single assignable cause and multiple assignable causes under the same cost and time parameters were compared. Also, a sensitivity analysis was conducted in which the variability of loss cost and design parameters due to change of cost and time and Weibull distribution parameters were evaluated.     

Robust algorithms for economic designing of a nonparametric control chart for abrupt shift in location

The existing statistical process control procedures typically rely on the fundamental assumption of a parametric distribution of the quality characteristic. However, when there is a lack of knowledge about the underlying distribution (as full knowledge is not available in practice), the performance of these parametric charts is very likely to be heavily degraded. Motivated by this problem, a one-sided nonparametric monitoring procedure using the single sample sign statistic is proposed for detecting a shift in the location parameter of a continuous distribution. An economic model of the control chart is developed to optimize the sample size, sampling interval, and control limits. Three data-dependent estimation approaches for the unknown parameter are evaluated and discussed. Simulation results exhibit that our proposed procedure generally performs well under a great variety of continuous distributions and hence it is recommended as an alternative scheme especially when the knowledge of the underlying distribution is imperfect. Furthermore, beneficial recommendations of estimation approach selection are provided for practical implementation of the control chart.     

A median loss control chart for monitoring quality loss under skewed distributions

The quality and loss of products are crucial factors separating competitive companies in global market. Firms widely employ a loss function to measure the loss caused by a deviation of the quality variable from the target value. Monitoring this deviation from the process target value is important from the view of Taguchi’s philosophy. In reality, there are many situations where the distribution of the quality variable may not be normal but skewed. This paper aims at developing a median loss (ML) control chart for monitoring quality loss under skewed distributions. Both the cases with fixed and variable sampling intervals are considered. Numerical results show that the ML chart with (optimal) variable sampling intervals performs better than the ML chart in detecting small to moderate shifts in the process loss centre or in the difference of mean and target and/or variance of a process variable. The ML chart and the ML chart with variable sampling intervals also illustrate the best performance in detection out-of-control process for a process quality variable with a left-skewed distribution. A numerical example illustrates the application of the proposed control chart.     

Economic and economic-statistical designs of the T2 control charts with SVSSI sampling scheme

Recent studies have shown that the adaptive T² chart with two different sampling interval and three sample sizes (SVSSI) shows a good performance in detecting small to large shifts in the process mean. This paper investigates the economic and economic statistical designs of the SVSSI T² charts. We use the Markov chain approach to developing the cost model proposed by Costa and Rahim (Journal of applied statistics 2001; 28: 875–885). A genetic algorithm approach is used to find the optimal solutions. Using numerical examples, we illustrate the performance of the proposed model and compare the statistical, economic, and economic statistical designs of the SVSSI T² chart with respect to the economic and statistical criteria. Furthermore, we compare the performance of the SVSSI T² chart with the other T² control schemes.     

The robust economic statistical design of the Hotelling's T2 chart

ABSTRACT

Economic statistical designs aim at minimizing the cost of process monitoring when a specific scenario or a set of estimated process and cost parameters is given. But, in practice the process may be affected by more than one scenario which may lead to severe cost penalties if the wrong design is used. Here, we investigate the robust economic statistical design (RESD) of the T² chart in an attempt to reduce these cost penalties when there are multiple scenarios. Our method is to employ the genetic algorithm (GA) optimization method to minimize the total expected monitoring cost across all distinct scenarios. We illustrate the effectiveness of the method using two numerical examples. Simulation studies indicate that robust economic statistical designs should be encouraged in practice.     

Economic design based on a multivariate Bayesian VSI chart with a dual control limit

In this paper, a multivariate Bayesian variable sampling interval (VSI) control chart for the economic design and optimization of statistical parameters is designed. Based on the VSI sampling strategy of a multivariate Bayesian control chart with dual control limits, the optimal expected cost function is constructed. The proposed model allows the determination of the scheme parameters that minimize the expected cost per time of the process. The effectiveness of the Bayesian VSI chart is estimated through economic comparisons with the Bayesian fixed sampling interval and the Hotelling's T² chart. This study is an in-depth study on a Bayesian multivariate control chart with variable parameter. Furthermore, it is shown that significant cost improvement may be realized through the new model.     

Economic and economic statistical design of T 2 control chart with two adaptive sample sizes

The Hotelling's T ² control chart, a direct analogue of the univariate Shewhart X¯ chart, is perhaps the most commonly used tool in industry for simultaneous monitoring of several quality characteristics. Recent studies have shown that using variable sampling size (VSS) schemes results in charts with more statistical power when detecting small to moderate shifts in the process mean vector. In this paper, we build a cost model of a VSS T ² control chart for the economic and economic statistical design using the general model of Lorenzen and Vance [The economic design of control charts: A unified approach, Technometrics 28 (1986), pp. 3–11]. We optimize this model using a genetic algorithm approach. We also study the effects of the costs and operating parameters on the VSS T ² parameters, and show, through an example, the advantage of economic design over statistical design for VSS T ² charts, and measure the economic advantage of VSS sampling versus fixed sample size sampling.     

Profile Monitoring Using Nonparametric Bootstrap T 2 Control Chart

In certain statistical process control applications, performance of a product or process can be monitored effectively using a linear profile or a linear relationship between a response variable and one or more explanatory variables. In this article, we design a nonparametric bootstrap control chart for monitoring simple linear profiles based on T ² statistic. We evaluate the performance of the proposed method in phase II. The average and standard deviation of the run length under different shifts in the intercept, slope, and standard deviation are considered as the performance measures. Simulation results show that the performance of the proposed bootstrap control chart improves as the size of the available data increases.     

Evaluation of CUSUM Charts for Finite-Horizon Processes

This article analyses and evaluates the properties of a CUSUM chart designed for monitoring the process mean in short production runs. Several statistical measures of performance that are appropriate when the process operates for a finite-time horizon are proposed. The methodology developed in this article can be used to evaluate the performance of the CUSUM scheme for any given set of chart parameters from both an economic and a statistical point of view, and thus, allows comparisons with various other charts.     

The Economic Design of the MSE Control Chart

In this article, an economic design model of the MSE control chart is proposed. The formulated cost function includes the cost incurred in production process and the loss borne by customers because of the shift of means and the drift of variation. The economic bounds where the process is shut down if the search indicates the presence of an assignable cause are also being considered. A program written in Matlab 7.0 is used to determine the optimum parameters including the sample size n, the sample interval h and the width of the control limits k. Finally, an example is given to illustrate the proposed economic design and sensitivity analysis is carried out.     

The extended GWMA control chart

This study extends the generally weighted moving average (GWMA) control chart by imitating the double exponentially weighted moving average (DEWMA) technique. The proposed chart is called the double generally weighted moving average (DGWMA) control chart. Simulation is employed to evaluate the average run length characteristics of the GWMA, DEWMA and DGWMA control charts. An extensive comparison of these control charts reveals that the DGWMA control chart with time-varying control limits is more sensitive than the GWMA and the DEWMA control charts for detecting medium shifts in the mean of a process when the shifts are between 0.5 and 1.5 standard deviations. Additionally, the GWMA control chart performs better when the mean shifts are below the 0.5 standard deviation, and the DEWMA control performs better when the mean shifts are above the 1.5 standard deviation. The design of the DGWMA control chart is also discussed.     

Development of a multiattribute synthetic-np chart

Over the last few decades, multiattribute control charts have been widely recommended in practice. They outperform the simultaneous uniattribute charts for monitoring multiattribute processes in many applications. Jolayemi [A statistical model for the design of multiattribute control charts. Indian J Stat. 1999;61:351–365] developed a statistical model for the design of a multiattribute np (Mnp) chart. Based on this model, a multiattribute synthetic (MSyn) chart is proposed in this article. Furthermore, the main features of the MSyn chart and Mnp chart are integrated to build a multiattribute Syn-np (MSyn-np) chart. The results of the comparative studies indicate that the new MSyn-np chart significantly outperforms the Mnp chart and MSyn chart by 83% and 27%, respectively, in terms of the average number of defectives over a wide range of process shifts under different circumstances.     

Economic and economic–statistical designs of VSI Bayesian control chart using Monte Carlo method and ABC algorithm

The usual practice in using a Bayesian control chart to monitor a process is done by taking samples from the process with fixed sampling intervals. Recent studies on traditional control charts have shown that variable sampling interval (VSI) scheme compared to classical scheme (fixed ratio sampling, FRS) helps practitioners to detect process shifts more quickly. In this paper, the effectiveness of VSI scheme on performance of Bayesian control chart has been studied, based on economic (ED) and economic–statistical designs (ESD). Monte Carlo method and artificial bee colony algorithm have been utilized to obtain optimal design parameters of Bayesian control chart (sample size, sampling intervals, warning limit and control limit) since the statistic of this approach does not have any specified distribution. Finally, VSI Bayesian control chart has been compared to FRS Bayesian and VSI X-bar approaches based on ED and ESD, separately. According to the results, it has been found that the performance of VSI Bayesian scheme is better than FRS Bayesian and VSI X-bar approaches.     

Determining Optimal Number of Samples for Constructing Multivariate Control Charts

Normally, an average run length (ARL) is used as a measure for evaluating the detecting performance of a multivariate control chart. This has a direct impact on the false alarm cost in Phase II. In this article, we first conduct a simulation study to calculate both in-control and out-of-control ARLs under various combinations of process shifts and number of samples. Then, a trade-off analysis between sampling inspection and false alarm costs is performed. Both the simulation results and trade-off analysis suggest that the optimal number of samples for constructing a multivariate control chart in Phase I can be determined.     

An integrated model for economic design of chi-square control chart and maintenance planning

Considered process in this article is a two-stage dependent process. Each item in this process has two quality characteristics as x and y while x and y are related to the stage 1 and 2, respectively. Each stage has two operational states as the in-control state and out-of-control state and transition time from the in-control state to the out-of-control state follows a general continues distribution function. The process is monitored using a chi-square control chart. An integrated model that coordinates the decisions related to the economic design of the used control chart and maintenance planning is presented. For the evaluation of the integrated model performance, a stand-alone maintenance model is also presented, and the performance of these two models is compared with each other.