Matrix mean squared error comparisons of some biased estimators with two biasing parameters

To deal with multicollinearity problem, the biased estimators with two biasing parameters have recently attracted much research interest. The aim of this article is to compare one of the last proposals given by Yang and Chang (2010 Yang, H., and X. Chang. 2010. A new two-parameter estimator in linear regression. Communications in Statistics: Theory and Methods 39 (6):923–34.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) with Liu-type estimator (Liu 2003 Liu, K. 2003. Using Liu-type estimator to combat collinearity. Communications in Statistics: Theory and Methods 32 (5):1009–20.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) and k ? d class estimator (Sakallioglu and Kaciranlar 2008 Sakallioglu, S., and S. Kaciranlar. 2008. A new biased estimator based on ridge estimation. Statistical Papers 49:669–89.[Crossref], [Web of Science ®] , [Google Scholar]) under the matrix mean squared error criterion. As well as giving these comparisons theoretically, we support the results with the extended simulation studies and real data example, which show the advantages of the proposal given by Yang and Chang (2010 Yang, H., and X. Chang. 2010. A new two-parameter estimator in linear regression. Communications in Statistics: Theory and Methods 39 (6):923–34.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) over the other proposals with increasing multicollinearity level.     

MSE Performance and Minimax Regret Significance Points for a HPT Estimator when each Individual Regression Coefficient is Estimated

In this article, we consider a heterogeneous preliminary test (HPT) estimator whose components are the OLS and feasible ridge regression (FRR) estimators, and derive the exact formulae for the moments of the HPT estimator using mathematical method. Since we cannot examine the MSE of the HPT estimator analytically, we execute the numerical evaluation to investigate the MSE performance of the HPT estimator, and compare the MSE performance of the HPT estimator with those of the FRR estimator and the usual OLS estimator. Furthermore, using the minimax regret criterion proposed by Sawa and Hiromatsu (1973 Sawa , T. , Hiromatsu , T. ( 1973 ). Minimax regret significance points for a preliminary test in regression analysis . Econometrica 41 : 1093 – 1101 .[Crossref], [Web of Science ®] , [Google Scholar]), we derive the optimal critical points of the preliminary F test. Our results show that the optimal significance points are greater than 19% and the optimal signicance points decrease as the denominator degrees of freedom of the preliminary F test statistic increases.     

An efficient use of moment's ratios of scrambling variables in a randomized response technique

This paper aimed at providing an efficient new unbiased estimator for estimating the proportion of a potentially sensitive attribute in survey sampling. The suggested randomization device makes use of the means, variances of scrambling variables, and the two scalars lie between “zero” and “one.” Thus, the same amount of information has been used at the estimation stage. The variance formula of the suggested estimator has been obtained. We have compared the proposed unbiased estimator with that of Kuk (1990 Kuk, A.Y.C. (1990). Asking sensitive questions inderectely. Biometrika 77:436–438.[Crossref], [Web of Science ®] , [Google Scholar]) and Franklin (1989 Franklin, L.A. (1989). A comparision of estimators for randomized response sampling with continuous distribution s from a dichotomous population. Commun. Stat. Theor. Methods 18:489–505.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]), and Singh and Chen (2009 Singh, S., Chen, C.C. (2009). Utilization of higher order moments of scrambling variables in randomized response sampling. J. Stat. Plann. Inference. 139:3377–3380.[Crossref], [Web of Science ®] , [Google Scholar]) estimators. Relevant conditions are obtained in which the proposed estimator is more efficient than Kuk (1990 Kuk, A.Y.C. (1990). Asking sensitive questions inderectely. Biometrika 77:436–438.[Crossref], [Web of Science ®] , [Google Scholar]) and Franklin (1989 Franklin, L.A. (1989). A comparision of estimators for randomized response sampling with continuous distribution s from a dichotomous population. Commun. Stat. Theor. Methods 18:489–505.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) and Singh and Chen (2009 Singh, S., Chen, C.C. (2009). Utilization of higher order moments of scrambling variables in randomized response sampling. J. Stat. Plann. Inference. 139:3377–3380.[Crossref], [Web of Science ®] , [Google Scholar]) estimators. The optimum estimator (OE) in the proposed class of estimators has been identified which finally depends on moments ratios of the scrambling variables. The variance of the optimum estimator has been obtained and compared with that of the Kuk (1990 Kuk, A.Y.C. (1990). Asking sensitive questions inderectely. Biometrika 77:436–438.[Crossref], [Web of Science ®] , [Google Scholar]) and Franklin (1989 Franklin, L.A. (1989). A comparision of estimators for randomized response sampling with continuous distribution s from a dichotomous population. Commun. Stat. Theor. Methods 18:489–505.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) estimator and Singh and Chen (2009 Singh, S., Chen, C.C. (2009). Utilization of higher order moments of scrambling variables in randomized response sampling. J. Stat. Plann. Inference. 139:3377–3380.[Crossref], [Web of Science ®] , [Google Scholar]) estimator. It is interesting to mention that the “optimum estimator” of the class of estimators due to Singh and Chen (2009 Singh, S., Chen, C.C. (2009). Utilization of higher order moments of scrambling variables in randomized response sampling. J. Stat. Plann. Inference. 139:3377–3380.[Crossref], [Web of Science ®] , [Google Scholar]) depends on the parameter π under investigation which limits the use of Singh and Chen (2009 Singh, S., Chen, C.C. (2009). Utilization of higher order moments of scrambling variables in randomized response sampling. J. Stat. Plann. Inference. 139:3377–3380.[Crossref], [Web of Science ®] , [Google Scholar]) OE in practice while the proposed OE in this paper is free from such a constraint. The proposed OE depends only on the moments ratios of scrambling variables. This is an advantage over the Singh and Chen (2009 Singh, S., Chen, C.C. (2009). Utilization of higher order moments of scrambling variables in randomized response sampling. J. Stat. Plann. Inference. 139:3377–3380.[Crossref], [Web of Science ®] , [Google Scholar]) estimator. Numerical illustrations are given in the support of the present study when the scrambling variables follow normal distribution. Theoretical and empirical results are very sound and quite illuminating in the favor of the present study.     

Credibility premium for rate-making systems

Credibility formula has been developed in many fields of actuarial sciences. Based upon Payandeh (2010 Payandeh, A.T. (2010). A new approach to the credibility formula. Insur.: Math. Econ. 46(2):334–338.[Crossref], [Web of Science ®] , [Google Scholar]), this article extends concept of credibility formula to relatively premium of a given rate-making system. More precisely, it calculates Payandeh’s (2010 Payandeh, A.T. (2010). A new approach to the credibility formula. Insur.: Math. Econ. 46(2):334–338.[Crossref], [Web of Science ®] , [Google Scholar]) credibility factor for zero-inflated Poisson gamma distributions with respect to several loss functions. A comparison study has been given.     

Stress–strength models with more than two states under exponential distribution

In the stress–strength models, analysis is based on the reliability of the system where the system is either in operational state or in failure state. Ery?lmaz (2011 Ery?lmaz, S. (2011). A new perspective to stress–strength models. Ann. Inst. Stat. Math. 63(1):101–115.[Crossref], [Web of Science ®] , [Google Scholar]) introduced the stress–strength reliability in a different framework assigning more than two states to the system depending on the difference between strength and stress values. Unlike Ery?lmaz (2011 Ery?lmaz, S. (2011). A new perspective to stress–strength models. Ann. Inst. Stat. Math. 63(1):101–115.[Crossref], [Web of Science ®] , [Google Scholar]), the present article deals with the ratio of the strength and stress values when the stress and strength follow independent exponential distributions. This article presents in detail the estimation aspect of the multistate stress–strength reliability function.     

Comment on a generalized stochastic restricted ridge regression estimator

In this note, we make some comments about the paper of Alheety and Kibria (2014 Alheety, M.I., Kibria, B.M.G. (2014). A generalized stochastic restricted ridge regression estimator. Commun. Stat. Theor. Meth. 43:4415–4427.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) and correct the wrongly proved Theorems in that paper.     

A Modification of a Percentile Estimation Procedure Based on Generalized Polya Urns

Adaptive designs find an important application in the estimation of unknown percentiles for an underlying dose-response curve. A nonparametric adaptive design was suggested by Mugno et al. (2004 Mugno, R.A., Zhus, W., Rosenberger, W.F. (2004). Adaptive urn designs for estimating several percentiles of a dose-response curve. Statist. Med. 23(13):2137–2150.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]) to simultaneously estimate multiple percentiles of an unknown dose-response curve via generalized Polya urns. In this article, we examine the properties of the design proposed by Mugno et al. (2004 Mugno, R.A., Zhus, W., Rosenberger, W.F. (2004). Adaptive urn designs for estimating several percentiles of a dose-response curve. Statist. Med. 23(13):2137–2150.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]) when delays in observing responses are encountered. Using simulations, we evaluate a modification of the design under varying group sizes. Our results demonstrate unbiased estimation with minimal loss in efficiency when compared to the original compound urn design.     

On the comparison of Warner's and unrelated question randomized response plans for estimating sensitive finite population proportions

We consider the problem of estimation of a finite population proportion (P) related to a sensitive attribute under Warner's (1965 Warner, S.L. (1965). Randomized response: A survey technique for eliminating evasive answer bias. J. Am. Stat. Assoc. 60:63–69.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) randomized response plan and the unrelated question plan due to Horvitz et al. (1967 Warner, S.L. (1965). Randomized response: A survey technique for eliminating evasive answer bias. J. Am. Stat. Assoc. 60:63–69.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) and prove that for a given probability sampling design, given any linear unbiased estimator (LUE) of P based on Warner's (1965 Warner, S.L. (1965). Randomized response: A survey technique for eliminating evasive answer bias. J. Am. Stat. Assoc. 60:63–69.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) plan with any given value of the plan parameter, there exists an LUE of P based on the unrelated question plan with a uniformly smaller variance for suitable choices of the plan parameters. Assuming that only the attribute is sensitive but its complement is innocuous, the same is also shown to be true when the plan parameters for the two plans are so chosen so that both offer the same specified level of privacy.     

Linear transformation models for survival analysis with tumor growth information in cancer screening study

The complication in analyzing tumor data is that the tumors detected in a screening program tend to be slowly progressive tumors, which is the so-called left-truncated sampling that is inherent in screening studies. Under the assumption that all subjects have the same tumor growth function, Ghosh (2008 Ghosh, D. (2008). Proportional hazards regression for cancer studies. Biometrics 64:141–148.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]) developed estimation procedures for the Cox proportional hazards model. Shen (2011a Shen, P.-S. (2011a). Proportional hazards regression for cancer screening data. J. Stat. Comput. Simul. 18:367–377.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) demonstrated that Ghosh (2008 Ghosh, D. (2008). Proportional hazards regression for cancer studies. Biometrics 64:141–148.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar])'s approach can be extended to the case when each subject has a specific growth function. In this article, under linear transformation model, we present a general framework to the analysis of data from cancer screening studies. We developed estimation procedures under linear transformation model, which includes Cox's model as a special case. A simulation study is conducted to demonstrate the potential usefulness of the proposed estimators.     

The raise estimator estimation,inference, and properties

Several methods using different approaches have been developed to remedy the consequences of collinearity. To the best of our knowledge, only the raise estimator proposed by García et al. (2010 García, C.B., García, J., Soto, J. (2010). The raise method: An alternative procedure to estimate the parameters in presence of collinearity. Qual. Quantity 45(2):403–423.[Crossref], [Web of Science ®] , [Google Scholar]) deals with this problem from a geometric perspective. This article fully develops the raise estimator for a model with two standardized explanatory variables. Inference in the raise estimator is examined, showing that it can be obtained from ordinary least squares methodology. In addition, contrary to what happens in ridge regression, the raise estimator maintains the coefficient of determination value constant. The expression of the variance inflation factor for the raise estimator is also presented. Finally, a comparative study of the raise and ridge estimators is carried out using an example.     

An objective Bayesian estimation in a two-period crossover design

Two-period crossover design is one of the commonly used designs in clinical trials. But, the estimation of treatment effect is complicated by the possible presence of carryover effect. It is known that ignoring the carryover effect when it exists can lead to poor estimates of the treatment effect. The classical approach by Grizzle (1965 Grizzle, J.E. (1965). The two-period change-over design and its use in clinical trials. Biometrics 21:467–480. See Grizzle (1974) for corrections.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]) consists of two stages. First, a preliminary test is conducted on carryover effect. If the carryover effect is significant, analysis is based only on data from period one; otherwise, analysis is based on data from both periods. A Bayesian approach with improper priors was proposed by Grieve (1985 Grieve, A.P. (1985). A Bayesian analysis of the two-period crossover design for clinical trials. Biometrics 41:979–990.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]) which uses a mixture of two models: a model with carryover effect and another without. The indeterminacy of the Bayes factor due to the arbitrary constant in the improper prior was addressed by assigning a minimally discriminatory value to the constant. In this article, we present an objective Bayesian estimation approach to the two-period crossover design which is also based on a mixture model, but using the commonly recommended Zellner–Siow g-prior. We provide simulation studies and a real data example and compare the numerical results with Grizzle (1965 Grizzle, J.E. (1965). The two-period change-over design and its use in clinical trials. Biometrics 21:467–480. See Grizzle (1974) for corrections.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar])’s and Grieve (1985 Grieve, A.P. (1985). A Bayesian analysis of the two-period crossover design for clinical trials. Biometrics 41:979–990.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar])’s approaches.     

Bahadur Representation of Linear Kernel Quantile Estimator for Stationary Processes

In this article, we discuss the method of linear kernel quantile estimator proposed by Parzen (1979 Parzen, E. (1979). Nonparametric statistical data modeling. J. Amer. Statist. Assoc. 74:105121.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]). We establish a Bahadur representation in sense of almost surely convergence with the rate log^{? α}n under the case of S-mixing random variable sequence which was proposed by Berkes (2009 Berkes, I., Hörmann, S., (2009). Asymptotic results for the itpirical process of stationary sequences. Stoch. Process. Their Applic. 119:12981324.[Crossref], [Web of Science ®] , [Google Scholar]). We also obtain the strong consistence of this estimator and its convergence rate.     

Improved Exponential Type Estimators of the Mean of a Sensitive Variable in the Presence of Nonsensitive Auxiliary Information

Recently, Koyuncu et al. (2013 Koyuncu, N., Gupta, S., Sousa, R. (2014). Exponential type estimators of the mean of a sensitive variable in the presence of non-sensitive auxiliary information. Communications in Statistics- Simulation and Computation[PubMed], [Web of Science ®] , [Google Scholar]) proposed an exponential type estimator to improve the efficiency of mean estimator based on randomized response technique. In this article, we propose an improved exponential type estimator which is more efficient than the Koyuncu et al. (2013 Koyuncu, N., Gupta, S., Sousa, R. (2014). Exponential type estimators of the mean of a sensitive variable in the presence of non-sensitive auxiliary information. Communications in Statistics- Simulation and Computation[PubMed], [Web of Science ®] , [Google Scholar]) estimator, which in turn was shown to be more efficient than the usual mean estimator, ratio estimator, regression estimator, and the Gupta et al. (2012 Gupta, S., Shabbir, J., Sousa, R., Corte-Real, P. (2012). Regression estimation of the mean of a sensitive variable in the presence of auxiliary information. Communications in Statistics – Theory and Methods 41:2394–2404.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) estimator. Under simple random sampling without replacement (SRSWOR) scheme, bias and mean square error expressions for the proposed estimator are obtained up to first order of approximation and comparisons are made with the Koyuncu et al. (2013 Koyuncu, N., Gupta, S., Sousa, R. (2014). Exponential type estimators of the mean of a sensitive variable in the presence of non-sensitive auxiliary information. Communications in Statistics- Simulation and Computation[PubMed], [Web of Science ®] , [Google Scholar]) estimator. A simulation study is used to observe the performances of these two estimators. Theoretical findings are also supported by a numerical example with real data. We also show how to, extend the proposed estimator to the case when more than one auxiliary variable is available.     

Fubini theorem for non additive measures in the framework of g-expectation

Since the seminal paper of Ghirardato (1997 Ghirardato, P. 1997. On the independence for non-additive measures, with a Fubini theorem. Journal of Economic Theory 73:261–91.[Crossref], [Web of Science ®] , [Google Scholar]), it is known that Fubini theorem for non additive measures can be available only for functions as “slice-comonotonic” in the framework of product algebra. Later, inspired by Ghirardato (1997 Ghirardato, P. 1997. On the independence for non-additive measures, with a Fubini theorem. Journal of Economic Theory 73:261–91.[Crossref], [Web of Science ®] , [Google Scholar]), Chateauneuf and Lefort (2008 Chateauneuf, A., and J. P. Lefort. 2008. Some Fubini theorems on product σ-algebras for non-additive measures. International Journal of Approximate Reasoning 48:686–96.[Crossref], [Web of Science ®] , [Google Scholar]) obtained some Fubini theorems for non additive measures in the framework of product σ-algebra. In this article, we study Fubini theorem for non additive measures in the framework of g-expectation. We give some different assumptions that provide Fubini theorem in the framework of g-expectation.     

Minimax estimators for the lower-bounded scale parameter of a location-scale family of distributions

This article is concerned with the minimax estimation of a scale parameter under the quadratic loss function where the family of densities is location-scale type. We obtain results for the case when the scale parameter is bounded below by a known constant. Implications for the estimation of a lower-bounded scale parameter of an exponential distribution are presented under unknown location. Furthermore, classes of improved minimax estimators are derived for the restricted parameter using the Integral Expression for Risk Difference (IERD) approach of Kubokawa (1994 Kubokawa, T. (1994). A unified approach to improving equivariant estimators. Ann. Stat. 22:290–299.[Crossref], [Web of Science ®] , [Google Scholar]). These classes are shown to include some existing estimators from literature.     

Universally optimal designs under interference models with and without block effects

The concept of neighbor designs was introduced and defined by Rees (1967 Rees, D.H. (1967). Some designs of use in serology. Biometrics 23:779–791.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]) along with giving some methods of their construction. Henceforth, many methods of construction of neighbor designs as well as of their generalizations are available in the literature. However, there are only few results on their optimality. Therefore, the purpose of this article is to give an overview of study on this problem. Recent results on optimality of specified neighbor balanced designs under various interference models with block effects are presented and then these results are compared with respective models where block effects are not significant.     

Complete moment convergence of moving-average process generated by a class of random variables

In this article, we establish the complete moment convergence of a moving-average process generated by a class of random variables satisfying the Rosenthal-type maximal inequality and the week mean dominating condition. On the one hand, we give the correct proof for the case p = 1 in Ko (2015 Ko, M.H. (2015). Complete moment convergence of moving average process generated by a class of random variables. J. Inequalities Appl. 2015(1):1–9. Article ID 225.[Crossref], [Web of Science ®] , [Google Scholar]); on the other hand, we also consider the case αp = 1 which was not considered in Ko (2015 Ko, M.H. (2015). Complete moment convergence of moving average process generated by a class of random variables. J. Inequalities Appl. 2015(1):1–9. Article ID 225.[Crossref], [Web of Science ®] , [Google Scholar]). The results obtained in this article generalize some corresponding ones for some dependent sequences.     

On extreme order statistics from heterogeneous beta distributions with applications

This paper treats the problem of stochastic comparisons for the extreme order statistics arising from heterogeneous beta distributions. Some sufficient conditions involved in majorization-type partial orders are provided for comparing the extreme order statistics in the sense of various magnitude orderings including the likelihood ratio order, the reversed hazard rate order, the usual stochastic order, and the usual multivariate stochastic order. The results established here strengthen and extend those including Kochar and Xu (2007 Kochar, S.C., Xu, M. (2007). Stochastic comparisons of parallel systems when components have proportional hazard rates. Probab. Eng. Inf. Sci. 21:597–609.[Crossref], [Web of Science ®] , [Google Scholar]), Mao and Hu (2010 Mao, T., Hu, T. (2010). Equivalent characterizations on orderings of order statistics and sample ranges. Probab. Eng. Inf. Sci. 24:245–262.[Crossref], [Web of Science ®] , [Google Scholar]), Balakrishnan et al. (2014 Balakrishnan, N., Barmalzan, G., Haidari, A. (2014). On usual multivariate stochastic ordering of order statistics from heterogeneous beta variables. J. Multivariate Anal. 127:147–150.[Crossref], [Web of Science ®] , [Google Scholar]), and Torrado (2015 Torrado, N. (2015). On magnitude orderings between smallest order statistics from heterogeneous beta distributions. J. Math. Anal. Appl. 426:824–838.[Crossref], [Web of Science ®] , [Google Scholar]). A real application in system assembly and some numerical examples are also presented to illustrate the theoretical results.     

Ridge estimator with correlated errors and two-stage ridge estimator under inequality restrictions

Liew (1976a Liew, C.K. (1976a). A two-stage least-squares estimation with inequality restrictions on parameters. Rev. Econ. Stat. LVIII(2):234–238.[Crossref], [Web of Science ®] , [Google Scholar]) introduced generalized inequality constrained least squares (GICLS) estimator and inequality constrained two-stage and three-stage least squares estimators by reducing primal–dual relation to problem of Dantzig and Cottle (1967 Dantzig, G.B., Cottle, R.W. (1967). Positive (semi-) definite matrices and mathematical programming. In: Abadie, J., ed. Nonlinear Programming (pp. 55–73). Amsterdam: North Holland Publishing Co. [Google Scholar]), Cottle and Dantzig (1974 Cottle, R.W., Dantzig, G.B. (1974). Complementary pivot of mathematical programming. In: Dantzig, G.B., Eaves, B.C., eds. Studies in OptimizationVol. 10. Washington: Mathematical Association of America. [Google Scholar]) and solving with Lemke (1962 Lemke, C.E. (1962). A method of solution for quadratic programs. Manage. Sci. 8(4):442–453.[Crossref], [Web of Science ®] , [Google Scholar]) algorithm. The purpose of this article is to present inequality constrained ridge regression (ICRR) estimator with correlated errors and inequality constrained two-stage and three-stage ridge regression estimators in the presence of multicollinearity. Untruncated variance–covariance matrix and mean square error are derived for the ICRR estimator with correlated errors, and its superiority over the GICLS estimator is examined via Monte Carlo simulation.     

Using the Inverse Maximum Ratio-Λ as a Technique to Quantify Surface Uniformity

Techniques used in variability assessment are subsequently used to draw conclusions regarding the “spread”/uniformity of data curves. Due to the limitations of these techniques, they are not adequate for circumstances where data manifest with multiple peaks. Examples of these manifestations (in three-dimensional space) include under-foot pressure distributions recorded for different types of footwear (Becerro-de-Bengoa-Vallejo et al., 2014 Biau, D.J. (2011). In brief: Standard deviation and standard error. Clinical Orthopaedics and Related Research 469(9):2661–2664.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]; Cibulka et al., 1994 Cibulka, M.T., Sinacore, D.R., Mueller, M.J. (1994). Shin splints and forefoot contact running: A case report. Journal of Orthopaedic &; Sports Physical Therapy 20(2):98–102.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]; Davies et al., 2003 Davies, M.B., Betts, R.P., Scott, I.R. (2003). Optical plantar pressure analysis following internal fixation for displaced intra-articular os calcis fractures. Foot &; Ankle International 24(11):851–856.[PubMed], [Web of Science ®] , [Google Scholar]), surface textures and interfaces designed to impact friction, and and and molecular surface structures such as viral epitopes (Torras and Garcia-Valls, 2004 Torras, C., Garcia-Valls, R. (2004). Quantification of membrane morphology by interpretation of scanning electron microscopy images. Journal of Membrane Science 233(1–2):119–127.[Crossref], [Web of Science ®] , [Google Scholar]; Pacejka, 1997; Fustaffson, 1997). This article proposes a technique for generating a single variable – Λ that will quantify the uniformity of such surfaces. We define and validate this technique using several mathematical and graphical models.