Mixture designs with orthogonal blocks

Constructions of blocked mixture designs are considered in situations where BLUEs of the block effect contrasts are orthogonal to the BLUEs of the regression coefficients. Orthogonal arrays (OA), Balanced Arrays (BAs), incidence matrices of balanced incomplete block designs (BIBDs), and partially balanced incomplete block designs (PBIBDs) are used. Designs with equal and unequal block sizes are considered. Also both cases where the constants involved in the orthogonality conditions depend and do not depend on the factors have been taken into account. Some standard (already available) designs can be obtained as particular cases of the designs proposed here.     

Construction on non-adaptive hypergeometric group testing desings for identifying at most two defectives

In the literature a systematic method of obtaining a group testing design is not available at present. Weideman and Raghavarao (1987a, b) gave methods for the construction of non - adaptive hypergeometric group testing designs for identifying at most two defectives by using a dual method. In the present investigation we have developed a method of construction of group testing designs from (i) Hypercubic Designs for t ≡ 3 (mod 6) and (ii) Balanced Incomplete Block Designs for t ≡ 1 (mod 6) and t ≡ 3 (mod 6). These constructions are accomplished by the use of dual designs. The designs so constructed satisfy specified properties and attained an optimal bound as discussed by Weidman and Raghavarao (1987a,b). Here it is also shown that the condition for pairwise disjoint sets of BIBD for t ≡ 1 (mod 6) given by Weideman and Raghavarao (1987b) is not true for all such designs.     

A note on the robustness of PBIBD(2)s against breakdown in the event of observation loss

Robustness against design breakdown following observation loss is investigated for Partially Balanced Incomplete Block Designs with two associate classes (PBIBD(2)s). New results are obtained which add to the body of knowledge on PBIBD(2)s. In particular, using an approach based on the E‐value of a design, all PBIBD(2)s with triangular and Latin square association schemes are established as having optimal block breakdown number. Furthermore, for group divisible designs not covered by existing results in the literature, a sufficient condition for optimal block breakdown number establishes that all members of some design sub‐classes have this property.     

The connectedness and optimality of a class of row-column designs

Balanced Incomplete Block Designs have been employed as row-column designs by a number of researchers. In this paper necessary and sufficient conditions for the connectedness of such designs are obtained, and methods for their optimisation are presented. The optimal design is shown to be always connected.     

Construction of Balanced Incomplete Block Designs Using Cyclic Shifts

Balanced incomplete block designs (BIBDs) play important role in design of experiments, especially in field experiments. These designs ensure that treatments are compared with equal precision. Several methods are available in the literature to construct BIBDs but in this article some infinite series of these designs are presented by method of cyclic shifts. This method expresses some standard properties of a design just through examining the sets of shifts rather than studying the whole design.     

The Construction of Optimal Balanced Incomplete Block Designs When Adjacent Observations are Correlated

An algorithm is described for the optimal rearrangement of the treatments within each block of a Balanced Incomplete Block Design when a specified “nearest neighbour” correlation structure exists among observations from plots in the same block. The procedure uses results obtained by Kiefer & Wynn (1981). Designs obtained using the algorithm are found to compare favourably with those produced by combinatorial methods given in Cheng (1983). The algorithm produces optimal designs for all BIBD parameter sets, including those not covered by the results of Kiefer & Wynn or Cheng.     

A SEQUENTIAL METHOD OF CONSTRUCTING OPTIMAL BLOCK DESIGNS

An algorithm for the construction of a wide class of block designs including Balanced Incomplete Blocks (BIB) is described. The algorithm which allows the experimenter to give weights for a set of treatment contrasts uses an initial starting design to generate an optimal block design sequentially. The performance of the algorithm is illustrated by examples, and designs constructed by the algorithm compare favourably with designs generated by other methods.     

Note on reduction of dimensionality for second-order response surface design model

To reduce the dimensionality of the second-order response surface design model, variance component indices under imposing and non imposing restrictions on the moment matrix toward the orthogonality are derived and presented and the same is illustrated with suitable examples in this article.     

Optimal Block Designs With Interference Effects From Neighboring Units Under a Non Additive Model

Here, the optimality of block design with interference effect from neighboring unit under a general non additive model is investigated, which allows for the presence of interactions among the treatments applied in the adjacent plots. A non additive model with interference × direct effects of treatments is considered as these effects contribute significantly to the response. A class of complete block designs balanced for interference effects from left neighboring unit is shown to be universally optimal for the estimation of direct and interference effects of treatments and two such series of designs have been constructed. Furthermore, considering direct treatment × block non additivity with interference effects, the optimality is studied and the optimal designs are obtained.     

On the block structure of proper block designs

In this paper we consider proper block designs and derive an upper bound for the number of blocks which can have a fixed number of symbols common with a given block of the design. To arrive at the desired bound, a generalization of an integer programming theorem due to Bush (1976) is first obtained. The integer programming theorem is then used to derive the main result of this paper. The bound given here is then compared with a similar bound obtained by Kageyama and Tsuji (1977).     

On the construction of a class of efficient row-column designs

In this paper a method for the construction of a class of row-column designs with good statistical properties and high efficiency is presented. The class of designs produced is shown to exhibit balance, orthogonality and adjusted orthogonality. The efficiencies of these designs are investigated in detail, and they are shown to be very high, and possibly maximal in some cases.     

On the recovery of intra- and interblock information in n-ary designs

This note presents an extension of Q-method of analysis for binary designs given by Rao (1956) to n-ary balanced and partially balanced block designs. Here a linked n-ary block (LNB) design is defined as the dual of balanced n-ary (BN) design. Having a note on Yates’ (1939, 1940) method of P-analysis, we further extend the expressions for binary linked block (LB) designs given by Rao (1956) to linked n-ary block (LNB) designs which admit easy estimation of parameters for these type of all n-ary designs.     

Regular E-Optimal Spring Balance Weighing Designs with Correlated Errors

The problems linked with an E-optimal spring balance weighing design with correlated errors are discussed. The topic is focus on the determining the maximal eigenvalue of the inverse of the information matrix of estimators. The constructing method of the E-optimal design, based on the incidence matrices of balanced incomplete block designs, is presented.     

Some methods for constructing C-designs

Block designs having a property described by Caliński (1971) and Saha (1976), referred to as C-property, are further considered. A necessary and sufficient condition for a block design to have the C-property is given by Saha (1976) and another by Ceranka and Koz?owska (1983). In this paper some methods for constructing such block designs are presented.     

Construction of central composite designs for balanced orthogonal blocks

Box & Hunter (1957) recommended a set of orthogonally blocked central composite designs (CCD) when the region of interest is spherical. In order to achieve rotatability along with orthogonal blocking, the block size for those designs becomes unequal and it may not be attractive or practical to use such unequally blocked designs in many practical situations. In this paper, a construction method of orthogonally blocked CCD under the assumption of equal block size is proposed and an index of block orthogonality is introduced.     

Balanced and partially balanced incomplete block designs with autocorrelation errors

The paper aims to find variance balanced and variance partially balanced incomplete block designs when observations within blocks are autocorrelated and we call them BIBAC and PBIBAC designs. Orthogonal arrays of type I and type II when used as BIBAC designs have smaller average variance of elementary contrasts of treatment effects compared to the corresponding Balanced Incomplete Block (BIB) designs with homoscedastic, uncorrelated errors. The relative efficiency of BIB designs compared to BIBAC designs depends on the block size k and the autocorrelation ρ and is independent of the number of treatments. Further this relative efficiency increases with increasing k. Partially balanced incomplete block designs with autocorrelated errors are introduced using partially balanced incomplete block designs and orthogonal arrays of type I and type II.     

A class of single replicate orthogonal designs

A simple method is given to calculate the number of degrees of freedom confounded with blocks of a specific factorial effect in a single replicate orthogonal design. Two classes of designs having partial orthogonality are also discussed     

On the analysis of experiments in affine resolvable designs

The paper gives explicit formulae for analysing an experiment carried out in an affine resolvable proper block design. They follow from a randomization model, decomposed into stratum submodels. Analyses within the four relevant strata, and then the combined analysis, are considered in details. The paper is essentially an extension of some results presented in recent books, by Caliński and Kageyama [2000. Block Designs: A Randomization Approach, Volume I: Analysis. Lecture Notes in Statistics, vol. 150. Springer, New York; 2003. Block Designs: A Randomization Approach, Volume II: Design. Lecture Notes in Statistics, vol. 170. Springer, New York].     

On the efficiency of some non-orthogonal split-plot×split-block designs with control treatments

Many split-plot×split-block (SPSB) type experiments used in agriculture, biochemistry or plant protection are designed to study new crop plant cultivars or chemical agents. In these experiments it is usually very important to compare test treatments with the so-called control treatments. It happens yet that experimental material is limited and it does not allow using a complete (orthogonal) SPSB design. In the paper we propose a non-orthogonal SPSB design for consideration. Two cases of the design are presented here, i.e. when its incompleteness is connected with a crossed treatment structure only or with a nested treatment structure only. It is assumed the factors' levels connected with the incompleteness of the design are split into two groups: a set of test treatments and a set of control treatments. The method of constructions involves applying augmented block designs for some factors' levels. In a modelling data obtained from such experiments the structure of experimental material and appropriate randomization scheme of the different kinds of units before they enter the experiment are taken into account. With respect to the analysis of the obtained randomization model the approach typical to the multistratum experiments with orthogonal block structure is adapted. The proposed statistical analysis of linear model obtained includes estimation of parameters, testing general and particular hypotheses defined by the (basic) treatment contrasts with special reference to the notion of general balance.     

On use of symmetrical balanced incomplete block design in construction of sampling design realising pre-assigned sets of inclusion probabilities of first two orders.

Gupta, Nigam and Kumar (1982) proposed a sampling scheme using certain combinatorial properties of balanced incomplete block design (BIBD) which realises first order inclusion probabilities proportional to measure of size(IPPS). Here their results have been extended by presenting samplng schemes realising pre-assigned sets of inclusion probabilities of first two orders.