Statistical test based on intuitionistic fuzzy hypotheses

In this paper, the classical statistical test based on intuitionistic fuzzy hypotheses in relation to the underlying population parametric is extended. In this approach, the type-I, type-II, power of test, and p-value are extended for intuitionistic fuzzy hypotheses. Throughout the paper, some applied examples are provided for both parametric and non parametric cases to clarify the discussions.     

Consistent and robust variable selection in regression based on Wald test

Selection of relevant predictor variables for building a model is an important problem in the multiple linear regression. Variable selection method based on ordinary least squares estimator fails to select the set of relevant variables for building a model in the presence of outliers and leverage points. In this article, we propose a new robust variable selection criterion for selection of relevant variables in the model and establish its consistency property. Performance of the proposed method is evaluated through simulation study and real data.     

A generalized test variable approach for grain yield comparisons of rice

Traditionally, an assessment for grain yield of rice is to split it into the yield components, including the number of panicles per plant, the number of spikelets per panicle, the 1000-grain weight and the filled-spikelet percentage, such that the yield performance can be individually evaluated through each component, and the products of yield components are employed for grain yield comparisons. However, when using the standard statistical methods, such as the two-sample t-test and analysis of variance, the assumptions of normality and variance homogeneity cannot be fully justified for comparing the grain yields, leading to that the empirical sizes cannot be adequately controlled. In this study, based on the concepts of generalized test variables and generalized p-values, a novel statistical testing procedure is developed for grain yield comparisons of rice. The proposed method is assessed by a series of numerical simulations. According to the simulation results, the proposed method performs reasonably well in Type I error control and empirical power. In addition, a real-life field experiment is analyzed by the proposed method, some productive rice varieties are screened out and suggested for a follow-up investigation.     

WLAD-LASSO method for robust estimation and variable selection in partially linear models

This paper focuses on robust estimation and variable selection for partially linear models. We combine the weighted least absolute deviation (WLAD) regression with the adaptive least absolute shrinkage and selection operator (LASSO) to achieve simultaneous robust estimation and variable selection for partially linear models. Compared with the LAD-LASSO method, the WLAD-LASSO method will resist to the heavy-tailed errors and outliers in the parametric components. In addition, we estimate the unknown smooth function by a robust local linear regression. Under some regular conditions, the theoretical properties of the proposed estimators are established. We further examine finite-sample performance of the proposed procedure by simulation studies and a real data example.     

A more powerful unconditional exact test of homogeneity for 2 × c contingency table analysis

The classical unconditional exact p-value test can be used to compare two multinomial distributions with small samples. This general hypothesis requires parameter estimation under the null which makes the test severely conservative. Similar property has been observed for Fisher's exact test with Barnard and Boschloo providing distinct adjustments that produce more powerful testing approaches. In this study, we develop a novel adjustment for the conservativeness of the unconditional multinomial exact p-value test that produces nominal type I error rate and increased power in comparison to all alternative approaches. We used a large simulation study to empirically estimate the 5th percentiles of the distributions of the p-values of the exact test over a range of scenarios and implemented a regression model to predict the values for two-sample multinomial settings. Our results show that the new test is uniformly more powerful than Fisher's, Barnard's, and Boschloo's tests with gains in power as large as several hundred percent in certain scenarios. Lastly, we provide a real-life data example where the unadjusted unconditional exact test wrongly fails to reject the null hypothesis and the corrected unconditional exact test rejects the null appropriately.     

Generalized variable method inference for the location parameter of the general half-normal distribution

This paper considers the development of inferential techniques based on the generalized variable method (GV-Method) for the location parameter of the general half-normal distribution. We are interested in hypothesis testing of, and interval estimation for, the location parameter. Body fat data, urinary excretion rate data, and simulated data are used to illustrate the application and to demonstrate the advantages of the proposed GV-Method over the large-sample method and the Bayesian method.     

A simultaneous variable selection methodology for linear mixed models

Selecting an appropriate structure for a linear mixed model serves as an appealing problem in a number of applications such as in the modelling of longitudinal or clustered data. In this paper, we propose a variable selection procedure for simultaneously selecting and estimating the fixed and random effects. More specifically, a profile log-likelihood function, along with an adaptive penalty, is utilized for sparse selection. The Newton-Raphson optimization algorithm is performed to complete the parameter estimation. By jointly selecting the fixed and random effects, the proposed approach increases selection accuracy compared with two-stage procedures, and the usage of the profile log-likelihood can improve computational efficiency in one-stage procedures. We prove that the proposed procedure enjoys the model selection consistency. A simulation study and a real data application are conducted for demonstrating the effectiveness of the proposed method.     

A new variable selection method for uniform designs

As an important class of space-filling designs, uniform designs (UDs) choose a set of points over a certain domain such that these points are uniformly scattered, under a specific discrepancy measure. They have been applied successfully in many industrial and scientific experiments since they appeared in 1980. A noteworthy and practical advantage is their ability to investigate a large number of high-level factors simultaneously with a fairly economical set of experimental runs. As a result, UDs can be properly used as experimental plans that are intended to derive the significant factors from a list of many potential ones. To this end, a new screening procedure is introduced via penalized least squares. A simulation study is conducted to support the proposed method, which reveals that it can be considered quite promising and expedient, as judged in terms of Type I and Type II error rates.     

A three-stage variable selection method for supersaturated designs

A supersaturated design (SSD) is a design whose run size is not enough for estimating all main effects. Such a design is commonly used in screening experiments to screen active effects based on the effect sparsity principle. Traditional approaches, such as the ordinary stepwise regression and the best subset variable selection, may not be appropriate in this situation. In this article, a new variable selection method is proposed based on the idea of staged dimensionality reduction. Simulations and several real data studies indicate that the newly proposed method is more effective than the existing data analysis methods.     

A nonparametric test for detecting changes in location

Procedure for the changepoint problem based on Mann-Whitney-Wilcoxon statistics is studied in Schechtman and Wolfe (1981). In this paper we give tables for the null distributions of the statistics for the one-sided and two-sided alternatives. We also report on some Monte Carlo power comparisons involving another nonparametric competitor, proposed by Pettitt (1979).     

A link-free sparse group variable selection method for single-index model

For regression problems with grouped covariates, we adapt the idea of sparse group lasso (SGL) [10 J. Friedman, T. Hastie, and R. Tibshirani, A note on the group lasso and a sparse group lasso, Tech. Rep., Statistics Department, Stanford University, 2010. [Google Scholar]] to the framework of the sufficient dimension reduction. Assuming that the regression falls into a single-index structure, we propose a method called the sparse group sufficient dimension reduction to conduct group and within-group variable selections simultaneously without assuming a specific link function. Simulation studies show that our method is comparable to the SGL under the regular linear model setting and outperforms SGL with higher true positive rates and substantially lower false positive rates when the regression function is nonlinear. One immediate application of our method is to the gene pathway data analysis where genes naturally fall into groups (pathways). An analysis of a glioblastoma microarray data is included for illustration of our method.     

A misspecification test for the higher order co-moments of the factor model

The traditional estimation of higher order co-moments of non-normal random variables by the sample analog of the expectation faces a curse of dimensionality, as the number of parameters increases steeply when the dimension increases. Imposing a factor structure on the process solves this problem; however, it leads to the challenging task of selecting an appropriate factor model. This paper contributes by proposing a test that exploits the following feature: when the factor model is correctly specified, the higher order co-moments of the unexplained return variation are sparse. It recommends a general to specific approach for selecting the factor model by choosing the most parsimonious specification for which the sparsity assumption is satisfied. This approach uses a Wald or Gumbel test statistic for testing the joint statistical significance of the co-moments that are zero when the factor model is correctly specified. The asymptotic distribution of the test is derived. An extensive simulation study confirms the good finite sample properties of the approach. This paper illustrates the practical usefulness of factor selection on daily returns of random subsets of S&P 100 constituents.     

Influential subsets on the variable selection

When one or few observations are deleted in the multiple linear regression model, they can affect the variable selection. In this paper we derived the formula for the Mallows C_p criterion when k observations are deleted and express it as a functionn of basic building blocks such as residuals and leverages. Also, two real date sets are used to see how the selected model changes as few observations re deleted.     

A simulation based method for assessing the statistical significance of logistic regression models after common variable selection procedures

Classification models can demonstrate apparent prediction accuracy even when there is no underlying relationship between the predictors and the response. Variable selection procedures can lead to false positive variable selections and overestimation of true model performance. A simulation study was conducted using logistic regression with forward stepwise, best subsets, and LASSO variable selection methods with varying total sample sizes (20, 50, 100, 200) and numbers of random noise predictor variables (3, 5, 10, 15, 20, 50). Using our critical values can help reduce needless follow-up on variables having no true association with the outcome.     

Looking for max-semistability: A new test for the extreme value condition

To test the extreme value condition, Cramér-Von Mises type tests were recently proposed by Drees et al. (2006) and Dietrich et al. (2002). Hüsler and Li (2006) presented a simulation study on the behavior of these tests and verified that they are not robust for models in the domain of attraction of a max-semistable distribution function. In this work we develop a test statistic that distinguishes quite well distribution functions which belong to a max-stable domain of attraction from those in a max-semistable one. The limit law is deduced and the results from a numerical simulation study are presented.     

A consistent test for heteroscedasticity in semi-parametric regression with nonparametric variance function based on the kernel method

It is important to detect the variance heterogeneity in regression models. Heteroscedasticity tests have been well studied in parametric and nonparametric regression models. This paper presents a consistent test for heteroscedasticity for nonlinear semi-parametric regression models with nonparametric variance function based on the kernel method. The properties of the test are investigated through Monte Carlo simulations. The test methods are illustrated with a real example.     

Bayesian variable selection for the Cox regression model with missing covariates

In this paper, we develop Bayesian methodology and computational algorithms for variable subset selection in Cox proportional hazards models with missing covariate data. A new joint semi-conjugate prior for the piecewise exponential model is proposed in the presence of missing covariates and its properties are examined. The covariates are assumed to be missing at random (MAR). Under this new prior, a version of the Deviance Information Criterion (DIC) is proposed for Bayesian variable subset selection in the presence of missing covariates. Monte Carlo methods are developed for computing the DICs for all possible subset models in the model space. A Bone Marrow Transplant (BMT) dataset is used to illustrate the proposed methodology.