Optimal choice of sample fraction in univariate financial tail index estimation

This study introduces a technique to estimate the Pareto distribution of the stock exchange index by using the maximum-likelihood Hill estimator. Recursive procedures based on the goodness-of-fit statistics are used to determine the optimal threshold fraction of extreme values to be included in tail estimation. These procedures are applied to three indices in the Malaysian stock market which included the consideration of a drastic economic event such as the Asian financial crisis. The empirical results evidenced alternating varying behavior of heavy-tailed distributions in the regimes for both upper and lower tails.     

More powerful modifications of unit root tests allowing structural change

It is well known that more powerful variants of Dickey–Fuller unit root tests are available. We apply two of these modifications, on the basis of simple maximum statistics and weighted symmetric estimation, to Perron tests allowing for structural change in trend of the additive outlier type. Local alternative asymptotic distributions of the modified test statistics are derived, and it is shown that their implementation can lead to appreciable finite sample and asymptotic gains in power over the standard tests. Also, these gains are largely comparable with those from GLS-based modifications to Perron tests, though some interesting differences do arise. This is the case for both exogenously and endogenously chosen break dates. For the latter choice, the new tests are applied to the Nelson–Plosser data.     

Phase I monitoring and change point estimation of autocorrelated poisson regression profiles

The objective of this paper is to study the Phase I monitoring and change point estimation of autocorrelated Poisson profiles where the response values within each profile are autocorrelated. Two charts, the SLRT and the Hotelling's T², are proposed along with an algorithm for parameter estimation. The detecting power of the proposed charts is compared using simulations in terms of the signal probability criterion. The performance of the SLRT method in estimating the change point in the regression parameters is also evaluated. Moreover, a real data example is presented to illustrate the application of the methods.     

Estimation for change point of discretely observed ergodic diffusion processes

We treat the change point problem in ergodic diffusion processes from discrete observations. Tonaki et al. (2021a) proposed adaptive tests for detecting changes in the diffusion and drift parameters in ergodic diffusion process models. When any change in the diffusion or drift parameter is detected by this or any other method, the next question to consider is where the change point is located. Therefore, we propose the method to estimate the change point of the parameter for two cases: the case where there is a change in the diffusion parameter, and the case where there is no change in the diffusion parameter but a change in the drift parameter. Furthermore, we present rates of convergence and distributional results of the change point estimators. Some examples and simulation results are also given.     

Detecting structural change in linear models

Consider a sequence of independent observations which change their marginal distribution at most once somewhere in the sequence and one is not certain where the change has occurred. One would be interested in detecting the change and determining the two distributions which would describe the sequence. On the other hand if no change had occurred, one would want to know the common distribution of the observations. This study develops a Bayesian test for detecting a switch from one linear model to another. The test is based on the marginal posterior mass function of the switch point and the posterior probability of a stable model. This test and an informal sequential procedure of Smith are illustrated with data generated from an unstable linear regression model, which changes the linear relationship between the dependent and independent variables     

Monotonic change point estimation of generalized linear model-based regression profiles

In this article, a maximum likelihood estimator is derived in the generalized linear model-based regression profiles under monotonic change in Phase II. The performance of the proposed estimator is comprehensively investigated through some special cases, and compared with estimators under step change and drift. The results show that the proposed estimator has better performance in small and medium shifts under different increasing changes. Finally, the applicability of the proposed estimator is illustrated using a real case.     

Robust estimation of a multilevel model with structural change

We postulate a spatiotemporal multilevel model and estimate using forward search algorithm and MLE imbedded into the backfitting algorithm. Forward search algorithm ensures robustness of the estimates by filtering the effect of temporary structural changes in the estimation of the group-level covariates, the individual-level covariates and spatial parameters. Backfitting algorithm provides computational efficiency of estimation procedure assuming an additive model. Simulation studies show that estimates are robust even in the presence of structural changes induced for example by epidemic outbreak. The model also produced robust estimates even for small sample and short time series common in epidemiological settings.     

Nonparametric estimation of a change point in positive shift models

Six nonparametric estimators of the change point are compared via Monte Carlo simulation in positive shift models of widely different taillengths. It is found that the best estimator in terms of smallest mean-squared error depends on the taillength of the underlying distribution. Overall, an estimator of Lombard (1987) based on a Wilcoxon scores rank statistic is recommended.     

Detection of change points using rank methods

In this paper, the detection and estimation of change points of local parameters are studied by means of localization procedures and rank statistics. These techniques are also applied to detection and estimation of the change points of scale parameters and that of location parameters of directional data.     

Non-parametric testing for the number of change points in a sequence of independent random variables

A non-parametric procedure is derived for testing for the number of change points in a sequence of independent continuously distributed variables when there is no prior information available. The procedure is based on the Kruskal–Wallis test, which is maximized as a function of all possible places of the change points. The procedure consists of a sequence of non-parametric tests of nested hypotheses corresponding to a decreasing number of change points. The properties of this procedure are analyzed by Monte Carlo methods and compared to a parametric procedure for the case that the variables are exponentially distributed. The critical values are given for sample sizes up to 200.     

Bias reduction in the estimation of a shape second-order parameter of a heavy-tailed model

In extreme value theory, the shape second-order parameter is a quite relevant parameter related to the speed of convergence of maximum values, linearly normalized, towards its limit law. The adequate estimation of this parameter is vital for improving the estimation of the extreme value index, the primary parameter in statistics of extremes. In this article, we consider a recent class of semi-parametric estimators of the shape second-order parameter for heavy right-tailed models. These estimators, based on the largest order statistics, depend on a real tuning parameter, which makes them highly flexible and possibly unbiased for several underlying models. In this article, we are interested in the adaptive choice of such tuning parameter and the number of top order statistics used in the estimation procedure. The performance of the methodology for the adaptive choice of parameters is evaluated through a Monte Carlo simulation study.     

Simultaneous sparse model selection and coefficient estimation for heavy-tailed autoregressive processes

We propose a sparse coefficient estimation and automated model selection procedure for autoregressive processes with heavy-tailed innovations based on penalized conditional maximum likelihood. Under mild moment conditions on the innovation processes, the penalized conditional maximum likelihood estimator satisfies a strong consistency, O_P(N^?1/2) consistency, and the oracle properties, where N is the sample size. We have the freedom in choosing penalty functions based on the weak conditions on them. Two penalty functions, least absolute shrinkage and selection operator and smoothly clipped average deviation, are compared. The proposed method provides a distribution-based penalized inference to AR models, which is especially useful when the other estimation methods fail or under perform for AR processes with heavy-tailed innovations [Feigin, Resnick. Pitfalls of fitting autoregressive models for heavy-tailed time series. Extremes. 1999;1:391–422]. A simulation study confirms our theoretical results. At the end, we apply our method to a historical price data of the US Industrial Production Index for consumer goods, and obtain very promising results.     

Fourier–type tests involving martingale difference processes

We develop testing procedures which detect if the observed time series is a martingale difference sequence. Furthermore, tests are developed that detect change–points in the conditional expectation of the series given its past. The test statistics are formulated following the approach of Fourier–type conditional expectations first proposed by Bierens (1982 Bierens, H. J. (1982). Consistent model speci?cation tests. J. Econometr. 20:105–134.[Crossref], [Web of Science ®] , [Google Scholar]) and have the advantage of computational simplicity. The limit behavior of the test statistics is investigated under the null hypothesis as well as under alternatives. Since the asymptotic null distribution contains unknown parameters, a bootstrap procedure is proposed in order to actually perform the test. The performance of the bootstrap version of the test is compared in finite samples with other methods for the same problem. A real–data application is also included.     

Modelling udder infection data using copula models for quadruples

We study copula models for correlated infection times in the four udder quarters of dairy cows. Both a semi-parametric and a nonparametric approach are considered to estimate the marginal survival functions, taking into account the effect of a binary udder quarter level covariate. We use a two-stage estimation approach and we briefly discuss the asymptotic behaviour of the estimators obtained in the first and the second stage of the estimation. A pseudo-likelihood ratio test is used to select an appropriate copula from the power variance copula family that describes the association between the outcomes in a cluster. We propose a new bootstrap algorithm to obtain the p-value for this test. This bootstrap algorithm also provides estimates for the standard errors of the estimated parameters in the copula. The proposed methods are applied to the udder infection data. A small simulation study for a setting similar to the setting of the udder infection data gives evidence that the proposed method provides a valid approach to select an appropriate copula within the power variance copula family.     

The power of two exact tests for structural change in the presence of heteroskedasticity

This paper compares analytically the power of the Jayatissa (1977) and Tsurumi (1984) tests for structural change in a heteroskedastic normal linear regression model with two equal-sized independent sub-samples. It is shown that the non-centrality parameter of the Tsurumi test cannot exceed that of the Jayatissa test and some conditions are obtained under which one test dominates the other.     

On optimising the estimation of high quantiles of a probability distribution

One of the major aims of one-dimensional extreme-value theory is to estimate quantiles outside the sample or at the boundary of the sample. The underlying idea of any method to do this is to estimate a quantile well inside the sample but near the boundary and then to shift it somehow to the right place. The choice of this “anchor quantile” plays a major role in the accuracy of the method. We present a bootstrap method to achieve the optimal choice of sample fraction in the estimation of either high quantile or endpoint estimation which extends earlier results by Hall and Weissman (1997) in the case of high quantile estimation. We give detailed results for the estimators used by Dekkers et al. (1989). An alternative way of attacking problems like this one is given in a paper by Drees and Kaufmann (1998).     

Testing for a change point in a sequence of exponential random variables with repeated values

Two test statistics are proposed for the change-point problem with repeated values when the data follow an exponential distribution. The properties of these two statistics have been studied and their asymptotic distributions under the alternative have been derived. The powers of the two test statistics are compared. Real-data examples are presented to illustrate the application of these tests.     

Detecting change points and monitoring biomedical data

Bayesian and likelihood approaches to on-line detecting change points in time series are discussed and applied to analyze biomedical data. Using a linear dynamic model, the Bayesian analysis outputs the conditional posterior probability of a change at time t ? 1, given the data up to time t and the status of changes occurred before time t ? 1. The likelihood method is based on a change-point regression model and tests whether there is no change-point.