Online control by attributes in the presence of classification errors with variable inspection interval

ABSTRACT

The procedure for online control by attribute consists of inspecting a single item at every m items produced (m ≥ 2). On each inspection, it is determined whether the fraction of the produced conforming items decreased. If the inspected item is classified as non conforming, the productive process is adjusted so that the conforming fraction returns to its original status. A generalization observed in the literature is to consider inspection errors and vary the inspection interval. This study presents an extension of this model by considering that the inspected item can be rated independently r (r ≥ 1) times. The process is adjusted every time the number of conforming classifications is less than a, 1 ≤ a ≤ r. This method uses the properties of an ergodic Markov chain to obtain the expression for the average cost of this control system. The genetic algorithm methodology is used to search for the optimal parameters that minimize the expected cost. The procedure is illustrated by a numerical example.     

Bias Reduction for the Maximum Likelihood Estimator of the Parameters of the Generalized Rayleigh Family of Distributions

We derive analytic expressions for the biases, to O(n^{? 1}), of the maximum likelihood estimators of the parameters of the generalized Rayleigh distribution family. Using these expressions to bias-correct the estimators is found to be extremely effective in terms of bias reduction, and generally results in a small reduction in relative mean squared error. In general, the analytic bias-corrected estimators are also found to be superior to the alternative of bias-correction via the bootstrap.     

Dependent Right Censorship in the MOMW Distribution

In this paper, we consider paired survival data, in which pair members are subject to the same right censoring time, but they are dependent on each other. Assuming the Marshall–Olkin Multivariate Weibull distribution for the joint distribution of the lifetimes (X₁, X₂) and the censoring time X₃, we derive the joint density of the actual observed data and obtain maximum likelihood estimators, Bayes estimators and posterior regret Gamma minimax estimators of the unknown parameters under squared error loss and weighted squared error loss functions. We compare the performances of the maximum likelihood estimators and Bayes estimators numerically in terms of biases and estimated Mean Squared Error Loss.     

On the estimation of serial correlation in Markov-dependent production processes

In this paper, we present a study about the estimation of the serial correlation for Markov chain models which is used often in the quality control of autocorrelated processes. Two estimators, non-parametric and multinomial, for the correlation coefficient are discussed. They are compared with the maximum likelihood estimator [U.N. Bhat and R. Lal, Attribute control charts for Markov dependent production process, IIE Trans. 22 (2) (1990), pp. 181–188.] by using some theoretical facts and the Monte Carlo simulation under several scenarios that consider large and small correlations as well a range of fractions (p) of non-conforming items. The theoretical results show that for any value of p≠0.5 and processes with autocorrelation higher than 0.5, the multinomial is more precise than maximum likelihood. However, the maximum likelihood is better when the autocorrelation is smaller than 0.5. The estimators are similar for p=0.5. Considering the average of all simulated scenarios, the multinomial estimator presented lower mean error values and higher precision, being, therefore, an alternative to estimate the serial correlation. The performance of the non-parametric estimator was reasonable only for correlation higher than 0.5, with some improvement for p=0.5.     

Deficiencies of minimum discrepancy estimators

Suppose the multinomial parameters p_r (θ) are functions of a real valued parameter 0, r = 1,2, …, k. A minimum discrepancy (m.d.) estimator θ of θ is defined as one which minimises the discrepancy function D = Σ n_rf(p_r/n_r), for a suitable function f where n_r is the relative frequency in r-th cell, r = 1,2, …, k. All the usual estimators like maximum likelihood (m. l), minimum chi-square (m. c. s.)., etc. are m.d. estimators. All m.d. estimators have the same asymptotic (first order) efficiency. They are compared on the basis of their deficiencies, a concept recently introduced by Hodges and Lehmann [2]. The expression for least deficiency at any θ is derived. It is shown that in general uniformly least deficient estimators do not exist. Necessary and sufficient conditions on p_r (0) for m. t. and m. c. s. estimators to be uniformly least deficient are obtained.     

A restricted Liu estimator for binary regression models and its application to an applied demand system

In this article, we propose a restricted Liu regression estimator (RLRE) for estimating the parameter vector, β, in the presence of multicollinearity, when the dependent variable is binary and it is suspected that β may belong to a linear subspace defined by Rβ?=?r. First, we investigate the mean squared error (MSE) properties of the new estimator and compare them with those of the restricted maximum likelihood estimator (RMLE). Then we suggest some estimators of the shrinkage parameter, and a simulation study is conducted to compare the performance of the different estimators. Finally, we show the benefit of using RLRE instead of RMLE when estimating how changes in price affect consumer demand for a specific product.     

Bias-corrected maximum likelihood estimation of the parameters of the generalized Pareto distribution

ABSTRACT

We derive analytic expressions for the biases, to O(n^?1), of the maximum likelihood estimators of the parameters of the generalized Pareto distribution. Using these expressions to bias-correct the estimators in a selective manner is found to be extremely effective in terms of bias reduction, and can also result in a small reduction in relative mean squared error (MSE). In terms of remaining relative bias, the analytic bias-corrected estimators are somewhat less effective than their counterparts obtained by using a parametric bootstrap bias correction. However, the analytic correction out-performs the bootstrap correction in terms of remaining %MSE. It also performs credibly relative to other recently proposed estimators for this distribution. Taking into account the relative computational costs, this leads us to recommend the selective use of the analytic bias adjustment for most practical situations.     

Feasible robust estimator in restricted semiparametric regression models based on the LTS approach

Under some nonstochastic linear restrictions based on either additional information or prior knowledge in a semiparametric regression model, a family of feasible generalized robust estimators for the regression parameter is proposed. The least trimmed squares (LTS) method proposed by Rousseeuw as a highly robust regression estimator is a statistical technique for fitting a regression model based on the subset of h observations (out of n) whose least-square fit possesses the smallest sum of squared residuals. The coverage h may be set between n/2 and n. The LTS estimator involves computing the hyperplane that minimizes the sum of the smallest h squared residuals. For practical purpose, it is assumed that the covariance matrix of the error term is unknown and thus feasible estimators are replaced. Then, we develop an algorithm for the LTS estimator based on feasible methods. Through the Monte Carlo simulation studies and a real data example, performance of the feasible type of robust estimators is compared with the classical ones in restricted semiparametric regression models.     

Estimation of the process incapability index

Greenwich and Jahr-Schaffrath (1995) introduced a new index C _pp a simple transformation of the index C _pm , which provides an uncontaminated separation between information concerning process accuracy and process precision. Under the assumption of normality, we first show that the estimators of C _pp proposed by Greenwich and Jahr-Schaffrath (1995) are UMVU estimators. We also show that for the inaccuracy index, the variance of the unbiased estimator is smaller than the mean squared error (MSE) of the natural (biased) estimator for n > 3. In addition, we obtain the r-th moment and the probability density function of these estimators.     

A Class of Estimators Using Auxiliary Information for Estimating Finite Population Variance in Presence of Measurement Errors

This article addresses the problem of estimating the population variance using auxiliary information in the presence of measurement errors. When the measurement error variance associated with study variable is known, a class of estimators of the population variance using auxiliary information has been proposed. We obtain the bias and mean squared errors of the suggested class of estimators upto the terms of order n ^?1, and also optimum estimators in asymptotic sense of the class with approximate mean squared error formula.     

Hypothesis Testing in Functional Comparative Calibration Models

The purpose of this article is to investigate hypothesis testing in functional comparative calibration models. Wald type statistics are considered which are asymptotically distributed according to the chi-square distribution. The statistics are based on maximum likelihood, corrected score approach, and method of moment estimators of the model parameters, which are shown to be consistent and asymptotically normally distributed. Results of analytical and simulation studies seem to indicate that the Wald statistics based on the method of moment estimators and the corrected score estimators are, as expected, less efficient than the Wald type statistic based on the maximum likelihood estimators for small n. Wald statistic based on moment estimators are simpler to compute than the other Wald statistics tests and their performance improves significantly as n increases. Comparisons with an alternative F statistics proposed in the literature are also reported.     

On-Line Process Control using Attributes with Misclassification Errors: An Economical Design for Short-Run Production

On-line process control consists of inspecting a single item for every m (integer and m ≥ 2) produced items. Based on the results of the inspection, it is decided whether the process is in-control (the fraction of conforming items is p ₁; State I) or out-of-control (the fraction of conforming items is p ₂ < p ₁; State II). If the inspected item is non conforming, it is determined that the process is out-of-control, and the production process is stopped for an adjustment; otherwise, production continues. As most designs of on-line process control assume a long-run production, this study can be viewed as an extension because it is concerned with short-run production and the decision regarding the process is subject to misclassification errors. The probabilistic model of the control system employs properties of an ergodic Markov chain to obtain the expression of the average cost of the system per unit produced, which can be minimised as a function of the sampling interval, m. The procedure is illustrated by a numerical example.     

Estimating a positive normal mean

Let X ₁, X ₂, ..., X _n be a random sample from a normal population with mean μ and variance σ ². In many real life situations, specially in lifetime or reliability estimation, the parameter μ is known a priori to lie in an interval [a, ∞). This makes the usual maximum likelihood estimator (MLE) ̄ an inadmissible estimator of μ with respect to the squared error loss. This is due to the fact that it may take values outside the parameter space. Katz (1961) and Gupta and Rohatgi (1980) proposed estimators which lie completely in the given interval. In this paper we derive some new estimators for μ and present a comparative study of the risk performance of these estimators. Both the known and unknown variance cases have been explored. The new estimators are shown to have superior risk performance over the existing ones over large portions of the parameter space.     

Developing a restricted two-parameter Liu-type estimator: A comparison of restricted estimators in the binary logistic regression model

In the context of estimating regression coefficients of an ill-conditioned binary logistic regression model, we develop a new biased estimator having two parameters for estimating the regression vector parameter β when it is subjected to lie in the linear subspace restriction Hβ = h. The matrix mean squared error and mean squared error (MSE) functions of these newly defined estimators are derived. Moreover, a method to choose the two parameters is proposed. Then, the performance of the proposed estimator is compared to that of the restricted maximum likelihood estimator and some other existing estimators in the sense of MSE via a Monte Carlo simulation study. According to the simulation results, the performance of the estimators depends on the sample size, number of explanatory variables, and degree of correlation. The superiority region of our proposed estimator is identified based on the biasing parameters, numerically. It is concluded that the new estimator is superior to the others in most of the situations considered and it is recommended to the researchers.     

A Class of s–K Type Principal Components Estimators in the Linear Model

In this article, we introduce a new class of estimators called the s–K type principal components estimators to combat multicollinearity, which include the principal components regression (PCR) estimator, the r–k estimator and the s–K estimator as special cases. Necessary and sufficient conditions for the superiority of the new estimator over the PCR estimator, the r–k estimator and the s–K estimator are derived in the sense of the mean squared error matrix criterion. A Monte Carlo simulation study and a numerical example are given to illustrate the performance of the proposed estimator.     

Bias Correction in the Type I Generalized Logistic Distribution

Four strategies for bias correction of the maximum likelihood estimator of the parameters in the Type I generalized logistic distribution are studied. First, we consider an analytic bias-corrected estimator, which is obtained by deriving an analytic expression for the bias to order n ^?1; second, a method based on modifying the likelihood equations; third, we consider the jackknife bias-corrected estimator; and fourth, we consider two bootstrap bias-corrected estimators. All bias correction estimators are compared by simulation. Finally, an example with a real data set is also presented.     

A note on some modified Pulak and Al-Sultan's model

Pulak and Al-Sultan presented a rectifying inspection plan applying in the determination of optimum process mean. However, they did not point out whether the non-conforming items in the sample of accepted lot are replaced or eliminated from the lot and neglected the quality loss within specification limits. In this paper, we further propose the modified Pulak and Al-Sultan model with quadratic quality loss function. There are four cases considered in the modified model: (1) the non-conforming items in the sample of accepted lot are neither replaced nor eliminated from the lot; (2) the non-conforming items in the sample of accepted lot are not replaced but are eliminated from the lot; (3) the non-conforming items in the sample of accepted lot are replaced by conforming ones; (4) the non-conforming items in the sample of accepted lot are replaced by non-inspected items. The numerical results and sensitivity analysis of parameters show that their solutions are slightly different.     

Comparison of Maximum Likelihood with Conditional Pairwise Likelihood Estimation of Person Parameters in the Rasch Model

This paper is concerned with person parameter estimation in the binary Rasch model. The loss of efficiency of a pseudo, quasi, or composite likelihood approach investigated. By means of a Monte Carlo study, two quasi likelihood estimators are compared to two well-established maximum likelihood approaches, one of which being a weighted likelihood procedure. The results show that the observed values of the root mean squared error are practically equivalent for the compared estimators in the case of a sufficiently large number of items.     

Minimum-Distance Estimator for Stable Exponent

Assume that X ₁, X ₂,…, X _n is a sequence of i.i.d. random variables with α-stable distribution (α ∈ (0,2], the stable exponent, is the unknown parameter). We construct minimum distance estimators for α by minimizing the Kolmogorov distance or the Cramér–von-Mises distance between the empirical distribution function G _n , and a class of distributions defined based on the sum-preserving property of stable random variables. The minimum distance estimators can also be obtained by minimizing a U-statistic estimate of an empirical distribution function involving the stable exponent. They share the same invariance property with the maximum likelihood estimates. In this article, we prove the strong consistency of the minimum distance estimators. We prove the asymptotic normality of our estimators. Simulation study shows that the new estimators are competitive to the existing ones and perform very closely even to the maximum likelihood estimator.     

A new economic scheme for CCC charts with run rules based on average number of inspected items

New statistical techniques and procedures have been developed to control high-yield processes along with looking for process improvement opportunities and minimizing production cost. Cumulative count of conforming control chart is generally a technique for high-quality processes, when nonconforming items are rarely produced. The objective of this study is to design control chart based on cumulative count of conforming items and run rules that develops an economic model based on the average number of inspected items to design m-of-m CCC chart in order to facilitate minimum average cost per item produced. The optimal design parameters for different values of nonconforming fraction and different cost parameters in each scenario are determined. Finally, to analyze the behavior of optimal economic solutions, sensitivity analysis of the model parameters is performed.