Allocating Redundancies to k-out-of-n Systems with Independent and Heterogeneous Components

This paper studies the allocation of independent redundancies with a common life distribution to k-out-of-n systems of independent components with non identical life distributions. A sufficient condition is found for allocating more active redundancies to the weaker component to gain a larger lifetime for k-out-of-n systems, and assigning more standby redundancies to the weaker (stronger) components is proved to yield larger lifetime for series (parallel) systems in the sense of the increasing concave (convex) order. Also, the optimal policy is proved to be majorized by all other policies when the system’s components are stochastically ordered.     

The mean general residual lifetime of (n − k + 1)-out-of-n systems with exchangeable components

The study of the reliability properties of (n ? k + 1)-out-of-n systems has gained a great deal of attention, from both theoretical and practical perspectives. In this article, we consider (n ? k + 1)-out-of-n systems with exchangeable components and study the stochastic properties of two forms of residual lifetimes of such systems under the following conditions: n ? r + 1 (r ? k) components of the system are operating at time t > 0, and/or the rth (r < k) component has failed, but the system is working at time t. In addition, some results relating to the functions of the mean general residual lifetimes (MGRL) are derived for these systems. Finally, in accordance with the generalized Farlie–Gumbel–Morgenstern model, we present the reliability properties of the general residual lifetime of (n ? k + 1)-out-of-n systems and investigate the asymptotic behavior of the proposed MGRL functions with exponential marginals.     

Failure Data Analysis with Extended Weibull Distribution

A consecutive k-out-of-n: G system consists of n linearly ordered components functions if and only if at least k consecutive components function. In this article we investigate the consecutive k-out-of-n: G system in a setup of multicomponent stress-strength model. Under this setup, a system consists of n components functions if and only if there are at least k consecutive components survive a common random stress. We consider reliability and its estimation of such a system whenever there is a change and no change in strength. We provide minimum variance unbiased estimation of system reliability when the stress and strength distributions are exponential with unknown scale parameters. A nonparametric minimum variance unbiased estimator is also provided.     

Reliability Evaluation for a Multi-State System Under Stress-Strength Setup

The two most commonly used reliability models in engineering applications are binary k-out-of-n:G and consecutive k-out-of-n:G systems. Multi-state k-out-of-n:G and multi-state consecutive k-out-of-n:G systems have been proposed as an extension of these systems and they have been found to be more flexible tool for modeling engineering systems. In this article, multi-state systems, in particular, multi-state k-out-of-n:G and multi-state consecutive k-out-of-n:G, are considered in a stress-strength setup. The states of the system are classified considering the number of components whose strengths above (below) the multiple stresses available in an environment. The exact state probabilities are provided and the results are illustrated for various stress-strength distributions. Maximum likelihood estimators of state probabilities are also presented.     

Dynamic Reliability Evaluation of Consecutive-k-Within-m-Out-of-n:F System

A consecutive k-within-m-out-of-n:F system consists of n linearly ordered components and fails if and only if there are m consecutive components which include among them at least k failed components. This system model generalizes both consecutive k-out-of-n:F and k-out-of-n:F systems. In this article, we study the dynamic reliability properties of consecutive k-within-m-out-of-n:F system consisting of exchangeable dependent components. We also obtain some stochastic ordering results and use them to get simple approximation formulae for the survival function and mean time to failure of this system.     

Reliability of weighted k-out-of-n: G systems consisting of two types of components and a cold standby component

In this article, the influence of a cold standby component to the reliability of weighted k-out-of-n: G systems consisting of two different types of components is studied. Weighted k-out-of-n: G systems are generalization of k-out-of-n systems that has attracted substantial interest in reliability theory because of their various applications in engineering. A method based on residual lifetimes of mixed components is presented for computing reliability of weighted k-out-of-n: G systems with two types of components and a cold standby component. Reliability and mean time to failure of different structured systems have been computed. Moreover, obtained results are used for defining optimal system configurations that can minimize the overall system costs.     

A Note on the Regression of Order Statistics

This paper examines the relationships between the mean residual life functions of parallel and k-out-of-n systems with the regression of order statistics. Using these relationships, the results and properties about the mean residual life function of those systems can be used for the regression of order statistics and vice versa. Finally, the paper proposes a definition for the mean residual life function of a k-out-of-n system when the number of failed components of the system is known.     

On residual lifetimes in sequential (n ? k?+?1)-out-of-n systems

Sequential order statistics is an extension of ordinary order statistics. They model the successive failure times in sequential k-out-of-n systems, where the failures of components possibly affect the residual lifetimes of the remaining ones. In this paper, we consider the residual lifetime of the components after the kth failure in the sequential (n − k + 1)-out-of-n system. We extend some results on the joint distribution of the residual lifetimes of the remaining components in an ordinary (n − k + 1)-out-of-n system presented in Bairamov and Arnold (Stat Probab Lett 78(8):945–952, 2008) to the case of the sequential (n − k + 1)-out-of-n system.     

Ordering New Conditional Residual Lifetimes of k-out-of-n Systems

This article introduces a new residual life of (n ? k + 1)-out-of-n systems consisting of n independent and identically distributed components, given that the total number of failures of components is not less than l at time t, and the system is still working. Some stochastic comparisons of residual lifetimes are conducted, and behaviors of DLR and ILR are given.     

Mean Time to Failure of Weighted k-out-of-n: G Systems

The purpose of this article is to develop a Monte-Carlo simulation algorithm for computing mean time to failure (MTTF) of weighted-k-out-of-n:G and linear consecutive-weighted-k-out-of-n:G systems. Our algorithm is based on the use of appropriately defined stochastic process which represents the total weight of the system at time t. These stochastic processes are explicitly defined and used along with the ordered component lifetimes to simulate MTTF of the systems with weighted components.     

Vine copula constructions of higher-dimensional dependent reliability systems

Copulas have proved to be very successful tools for the flexible modeling of dependence. Bivariate copulas have been deeply researched in recent years, while building higher-dimensional copulas is still recognized to be a difficult task. In this paper, we study the higher-dimensional dependent reliability systems using a type of decomposition called “vine,” by which a multivariate distribution can be decomposed into a cascade of bivariate copulas. Some equations of system reliability for parallel, series, and k-out-of-n systems are obtained and then decomposed based on C-vine and D-vine copulas. Finally, a shutdown system is considered to illustrate the results obtained in the paper.     

On the mean residual life of a generalized k-out-of-n system

A generalized k-out-of-n system consists of N modules in which the i th module is composed of n_i components in parallel. The system failswhen at least f components in the whole system or at least k consecutive modules have failed. In this article, we obtain the mean residual life function of such a generalized k-out-of-n system under different conditions, namely, when the number of components in each module is equal or unequal and when the components of the system are independent or exchangeable.     

On the Mean Remaining Strength of the k-Out-of-n:F System with Exchangeable Components

In this article, we consider the mean remaining strength of a k-out-of-n:F system in the stress–strength setup for the exchangeable components. We provide some results for parallel and series systems under this setup, where X₁, X₂, …, X_n are the strengths of the components designed under the common stress. An illustrative example is given for the k-out-of- n:F system using the multivariate FGM distribution.     

A note on the mean residual life function of a coherent system with exchangeable or nonidentical components

This article investigates some properties of the mean residual life function of (n−k+1)-out-of-n systems, when the lifetimes of the system components are independent random variables but not necessarily identically distributed and when the joint distribution of the component lifetimes is exchangeable, extending the results of Asadi and Goliforushani (2008) [On the mean residual life function of coherent systems. IEEE Transactions on Reliability 57 (4) 574-580] for the case of independent and identically distributed components. The extension to a coherent system with exchangeable components is also given.     

An Integral Bhattacharyya Type Bound for the Bayes Risk

In this article, some results are derived on stochastic comparisons of the residual and past lifetimes of an (n ? k + 1)-out-of-n system with dependent components. These findings generalize some recent results obtained on systems with independent components and provide some interesting results for a system with dependent components following an Archimedean copula. An illustrative example is provided.     

Some representation theorems in terms of mean residual lifetime and mean inactivity time of coherent systems

Abstract

In this paper, we consider a k-out-of-n system consisting of n identical components with independent lifetimes. We show that when the underlying distribution function F(t) is absolutely continuous, then it can be univocally determined by some particular mean residual lives or mean inactivity times of the system. It is then shown that these results may be extended to coherent (or mixed) systems.     

Simultaneous estimation of several CDF’s: homogeneity constraint

Let {x_ij(1 ? j ? n_i)|i = 1, 2, …, k} be k independent samples of size n_j from respective distributions of functions F_j(x)(1 ? j ? k). A classical statistical problem is to test whether these k samples came from a common distribution function, F(x) whose form may or may not be known. In this paper, we consider the complementary problem of estimating the distribution functions suspected to be homogeneous in order to improve the basic estimator known as “empirical distribution function” (edf), in an asymptotic setup. Accordingly, we consider four additional estimators, namely, the restricted estimator (RE), the preliminary test estimator (PTE), the shrinkage estimator (SE), and the positive rule shrinkage estimator (PRSE) and study their characteristic properties based on the mean squared error (MSE) and relative risk efficiency (RRE) with tables and graphs. We observed that for k ? 4, the positive rule SE performs uniformly better than both shrinkage and the unrestricted estimator, while PTEs works reasonably well for k < 4.     

E-Bayesian estimation for system reliability and availability analysis based on exponential distribution

The main purpose of this article is to introduce the E-Bayesian approach to gain flexibility in the reliability-availability system estimation. This approach will be used in series systems, parallel systems, and k-out-of-m systems, based on exponential distribution under squared error loss function, when time is continuous. We use three prior distributions to investigate its impact on the E-Bayesian approach, those prior distributions cover a big spectrum of possibilities. We show in real examples and also by simulations, how the procedure behaves. In the simulation study also we explore the impact on this estimation approach, when the number of components of the system increases.     

Reliability Research of k-out-of-n: G Supply Chain System Based on Copula

Supply chain management has received considerable attention in the literature and it is meaningful and important to be able to measure the reliability of supply chains. In the article, the suppliers in the supply chain systems are not independent of each other and the dependency relation may be either linear or nonlinear correlation. From the view of the distribution service process, a copula-based method is proposed for analyzing the reliability of supply chains. In this article, by introducing the model of k-out-of-n: G system into the studies of supply chains, an evaluation method is suggested and the reliability indexes are obtained. Finally, a numerical example is presented to illustrate the results obtained in this article.     

A Non‐parametric ANOVA‐type Test for Regression Curves Based on Characteristic Functions

This article studies a new procedure to test for the equality of k regression curves in a fully non‐parametric context. The test is based on the comparison of empirical estimators of the characteristic functions of the regression residuals in each population. The asymptotic behaviour of the test statistic is studied in detail. It is shown that under the null hypothesis, the distribution of the test statistic converges to a finite combination of independent chi‐squared random variables with one degree of freedom. The coefficients in this linear combination can be consistently estimated. The proposed test is able to detect contiguous alternatives converging to the null at the rate n ^{? 1 ∕ 2}. The practical performance of the test based on the asymptotic null distribution is investigated by means of simulations.