ROBUST ANALYSIS OF THE BIFURCATING AUTOREGRESSIVE MODEL IN CELL LINEAGE STUDIES

A robust estimation procedure for the bifurcating autoregressive model in cell lineage studies is proposed. The method is illustrated by application to a real data set and is compared with least squares estimates in a small simulation study.     

Focused Information Criterion and Model Averaging in Quantile Regression

In this article, we study model selection and model averaging in quantile regression. Under general conditions, we develop a focused information criterion and a frequentist model average estimator for the parameters in quantile regression model, and examine their theoretical properties. The new procedures provide a robust alternative to the least squares method or likelihood method, and a major advantage of the proposed procedures is that when the variance of random error is infinite, the proposed procedure works beautifully while the least squares method breaks down. A simulation study and a real data example are presented to show that the proposed method performs well with a finite sample and is easy to use in practice.     

Simple Robust Tests for Autocorrelated Errors in Time Series Design Intervention Models

A simple, robust test for the autocorrelation parameter in an intervention time-series model (AB design) is proposed. It is analogous to the traditional tests and can easily be computed by using the freeware R. In the same way as traditional tests of autocorrelation are based on least squares (LS) fits of a linear model, our robust test is based on the highly efficient Wilcoxon fit of the linear model. We present the results of a Monte Carlo study which show that our robust test inherits the good efficiency properties of this Wilcoxon fit. Its empirical power is only slightly less than the empirical power of the least squares test over situations with normally distributed errors while it exhibited much more power over situations with error distributions having tails heavier than those of a normal distribution. It also showed robustness of validity over all null situations simulated. We also present the results of the application of our test to a real data set which illustrates the robustness of our test.     

A monte carlo study of robust and least squares response surface methods

Response surface methodology is useful for exploring a response over a region of factor space and in searching for extrema. Its generality, makes it applicable to a variety of areas. Classical response surface methodology for a continuous response variable is generally based on least squares fitting. The sensitivity of least squares to outlying observations carries over to the surface procedures. To overcome this sensitivity, we propose response surface methodology based on robust procedures for continuous response variables. This robust methodology is analogous to the methodology based on least squares, while being much less sensitive to outlying observations. The results of a Monte Carlo study comparing it and classical surface methodologies for normal and contaminated normal errors are presented. The results show that as the proportion of contamination increases, the robust methodology correctly identifies a higher proportion of extrema than the least squares methods and that the robust estimates of extrema tend to be closer to the true extrema than the least squares methods.     

Tests of hypotheses based on ranks in the general linear model

A unified approach is developed for testing hypotheses in the general linear model based on the ranks of the residuals. It complements the nonparametric estimation procedures recently reported in the literature. The testing and estimation procedures together provide a robust alternative to least squares. The methods are similar in spirit to least squares so that results are simple to interpret. Hypotheses concerning a subset of specified parameters can be tested, while the remaining parameters are treated as nuisance parameters. Asymptotically, the test statistic is shown to have a chi-square distribution under the null hypothesis. This result is then extended to cover a sequence of contiguous alternatives from which the Pitman efficacy is derived. The general application of the test requires the consistent estimation of a functional of the underlying distribution and one such estimate is furnished.     

Robust Regression Using Data Partitioning and M-Estimation

We propose a new robust regression estimator using data partition technique and M estimation (DPM). The data partition technique is designed to define a small fixed number of subsets of the partitioned data set and to produce corresponding ordinary least square (OLS) fits in each subset, contrary to the resampling technique of existing robust estimators such as the least trimmed squares estimator. The proposed estimator shares a common strategy with the median ball algorithm estimator that is obtained from the OLS trial fits only on a fixed number of subsets of the data. We examine performance of the DPM estimator in the eleven challenging data sets and simulation studies. We also compare the DPM with the five commonly used robust estimators using empirical convergence rates relative to the OLS for clean data, robustness through mean squared error and bias, masking and swamping probabilities, the ability of detecting the known outliers, and the regression and affine equivariances.     

Consistent and robust variable selection in regression based on Wald test

Selection of relevant predictor variables for building a model is an important problem in the multiple linear regression. Variable selection method based on ordinary least squares estimator fails to select the set of relevant variables for building a model in the presence of outliers and leverage points. In this article, we propose a new robust variable selection criterion for selection of relevant variables in the model and establish its consistency property. Performance of the proposed method is evaluated through simulation study and real data.     

Empirical study of robust estimation methods for PAR models with application to the air quality area

Abstract

This paper compares three estimators for periodic autoregressive (PAR) models. The first is the classical periodic Yule-Walker estimator (YWE). The second is a robust version of YWE (RYWE) which uses the robust autocovariance function in the periodic Yule-Walker equations, and the third is the robust least squares estimator (RLSE) based on iterative least squares with robust versions of the original time series. The daily mean particulate matter concentration (PM10) data is used to illustrate the methodologies in a real application, that is, in the Air Quality area.     

Robust inference in an heteroscedastic measurement error model

In this paper we deal with robust inference in heteroscedastic measurement error models. Rather than the normal distribution, we postulate a Student t distribution for the observed variables. Maximum likelihood estimates are computed numerically. Consistent estimation of the asymptotic covariance matrices of the maximum likelihood and generalized least squares estimators is also discussed. Three test statistics are proposed for testing hypotheses of interest with the asymptotic chi-square distribution which guarantees correct asymptotic significance levels. Results of simulations and an application to a real data set are also reported.     

Estimation of regression parameters in the presence of outliers in the response

In this paper, we consider a regression model with non-spherical covariance structure and outliers in the response. The generalized least squares estimator obtained from the full data set is generally not used in the presence of outliers and an estimator based on only the non-outlying observations is preferred. Here we propose as an estimator a convex combination of the full set and the deleted set estimators and compare its performance with the other two.     

Generalised Rank Regression Estimator with Standard Error Adjusted Lasso

One of the standard variable selection procedures in multiple linear regression is to use a penalisation technique in least‐squares (LS) analysis. In this setting, many different types of penalties have been introduced to achieve variable selection. It is well known that LS analysis is sensitive to outliers, and consequently outliers can present serious problems for the classical variable selection procedures. Since rank‐based procedures have desirable robustness properties compared to LS procedures, we propose a rank‐based adaptive lasso‐type penalised regression estimator and a corresponding variable selection procedure for linear regression models. The proposed estimator and variable selection procedure are robust against outliers in both response and predictor space. Furthermore, since rank regression can yield unstable estimators in the presence of multicollinearity, in order to provide inference that is robust against multicollinearity, we adjust the penalty term in the adaptive lasso function by incorporating the standard errors of the rank estimator. The theoretical properties of the proposed procedures are established and their performances are investigated by means of simulations. Finally, the estimator and variable selection procedure are applied to the Plasma Beta‐Carotene Level data set.     

Two-Stage Welsh's Trimmed Mean for the Simultaneous Equations Model

This paper discusses the large sample theory of the two-stage Welsh's trimmed mean for the limited information simultaneous equations model. Besides having asymptotic normality, this trimmed mean, as the two-stage least squares estimator, is a generalized least squares estimator. It also acts as a robust Aitken estimator for the simultaneous equations model. Examples illustrate real data analysis and large sample inferences based on this trimmed mean.     

Support vector regression based residual control charts

Control charts for residuals, based on the regression model, require a robust fitting technique for minimizing the error resulting from the fitted model. However, in the multivariate case, when the number of variables is high and data become complex, traditional fitting techniques, such as ordinary least squares (OLS), lose efficiency. In this paper, support vector regression (SVR) is used to construct robust control charts for residuals, called SVR-chart. This choice is based on the fact that the SVR is designed to minimize the structural error whereas other techniques minimize the empirical error. An application shows that SVR methods gives competitive results in comparison with the OLS and the partial least squares method, in terms of standard deviation of the error prediction and the standard error of performance. A sensitivity study is conducted to evaluate the SVR-chart performance based on the average run length (ARL) and showed that the SVR-chart has the best ARL behaviour in comparison with the other residuals control charts.     

On distribution-weighted partial least squares with diverging number of highly correlated predictors

Summary.  Because highly correlated data arise from many scientific fields, we investigate parameter estimation in a semiparametric regression model with diverging number of predictors that are highly correlated. For this, we first develop a distribution-weighted least squares estimator that can recover directions in the central subspace, then use the distribution-weighted least squares estimator as a seed vector and project it onto a Krylov space by partial least squares to avoid computing the inverse of the covariance of predictors. Thus, distrbution-weighted partial least squares can handle the cases with high dimensional and highly correlated predictors. Furthermore, we also suggest an iterative algorithm for obtaining a better initial value before implementing partial least squares. For theoretical investigation, we obtain strong consistency and asymptotic normality when the dimension p of predictors is of convergence rate O { n ^1/2/ log ( n )} and o ( n ^1/3) respectively where n is the sample size. When there are no other constraints on the covariance of predictors, the rates n ^1/2 and n ^1/3 are optimal. We also propose a Bayesian information criterion type of criterion to estimate the dimension of the Krylov space in the partial least squares procedure. Illustrative examples with a real data set and comprehensive simulations demonstrate that the method is robust to non-ellipticity and works well even in 'small n –large p ' problems.     

Diagnostics for non-linear regression

Sensitivity analysis in regression is concerned with assessing the sensitivity of the results of a regression model (e.g., the objective function, the regression parameters, and the fitted values) to changes in the data. Sensitivity analysis in least squares linear regression has seen a great surge of research activities over the last three decades. By contrast, sensitivity analysis in non-linear regression has received very little attention. This paper deals with the problem of local sensitivity analysis in non-linear regression. Closed-form general formulas are provided for the sensitivities of three standard methods for the estimation of the parameters of a non-linear regression model based on a set of data. These methods are the least squares, the minimax, and the least absolute value methods. The effectiveness of the proposed measures is illustrated by application to several non-linear models including the ultrasonic data and the onion yield data. The proposed sensitivity measures are shown to deal effectively with the detection of influential observations in non-linear regression models.     

Robust regression:a weighted least squares approach

Robust regression has not had a great impact on statistical practice, although all statisticians are convinced of its importance. The procedures for robust regression currently available are complex, and computer intensive. With a modification of the Gaussian paradigm, taking into consideration outliers and leverage points, we propose an iteratively weighted least squares method which gives robust fits. The procedure is illustrated by applying it on data sets which have been previously used to illustrate robust regression methods.It is hoped that this simple, effective and accessible method will find its use in statistical practice.     

A Review Of Some Robust Data Analysis And Multiple Outlier Detection Procedures

Some recent contributions to robust data analysis and multiple outlier detection are discussed. Two methods of analysis producing robust estimates and sets of weights which may be inspected for outliers are described and compared. Some examples of their application are given to support the recommendation that both ordinary least squares and a robust method of analysis should be part of routine data analysis.     

Semiparametric Time-Varying Coefficients Regression Model for Longitudinal Data

Abstract.  In this paper, we consider a semiparametric time-varying coefficients regression model where the influences of some covariates vary non-parametrically with time while the effects of the remaining covariates follow certain parametric functions of time. The weighted least squares type estimators for the unknown parameters of the parametric coefficient functions as well as the estimators for the non-parametric coefficient functions are developed. We show that the kernel smoothing that avoids modelling of the sampling times is asymptotically more efficient than a single nearest neighbour smoothing that depends on the estimation of the sampling model. The asymptotic optimal bandwidth is also derived. A hypothesis testing procedure is proposed to test whether some covariate effects follow certain parametric forms. Simulation studies are conducted to compare the finite sample performances of the kernel neighbourhood smoothing and the single nearest neighbour smoothing and to check the empirical sizes and powers of the proposed testing procedures. An application to a data set from an AIDS clinical trial study is provided for illustration.     

An extended sweep operator for the cross validation of variable selection in linear regression

In its application to variable selection in the linear model, cross-validation is traditionally applied to an individual model contained in a set of potential models. Each model in the set is cross-validated independently of the rest and the model with the smallest cross-validated sum of squares is selected. In such settings, an efficient algorithm for cross-validation must be able to add and to delete single points quickly from a mixed model. Recent work in variable selection has applied cross-validation to an entire process of variable selection, such as Backward Elimination or Stepwise regression (Thall, Simon and Grier, 1992). The cross-validated version of Backward Elimination, for example, divides the data into an estimation and validation set and performs a complete Backward Elimination on the estimation set, while computing the cross-validated sum of squares at each step with the validation set. After doing this process once, a different validation set is selected and the process is repeated. The final model selection is based on the cross-validated sum of squares for all Backward Eliminations. An optimal algorithm for this application of cross-validation need not be efficient in adding and deleting observations from a single model but must be efficient in computing the cross-validation sum of squares from a series of models using a common validation set. This paper explores such an algorithm based on the sweep operator.     

Estimation of parameters in a generalized GMANOVA model based on an outer product analogy and least squares

This paper investigates estimation of parameters in a combination of the multivariate linear model and growth curve model, called a generalized GMANOVA model. Making analogy between the outer product of data vectors and covariance yields an approach to directly do least squares to covariance. An outer product least squares estimator of covariance (COPLS estimator) is obtained and its distribution is presented if a normal assumption is imposed on the error matrix. Based on the COPLS estimator, two-stage generalized least squares estimators of the regression coefficients are derived. In addition, asymptotic normalities of these estimators are investigated. Simulation studies have shown that the COPLS estimator and two-stage GLS estimators are alternative competitors with more efficiency in the sense of sample mean, standard deviations and mean of the variance estimates to the existing ML estimator in finite samples. An example of application is also illustrated.