Statistical quality control based on ranked set sampling

Different quality control charts for the sample mean are developed using ranked set sampling (RSS), and two of its modifications, namely median ranked set sampling (MRSS) and extreme ranked set sampling (ERSS). These new charts are compared to the usual control charts based on simple random sampling (SRS) data. The charts based on RSS or one of its modifications are shown to have smaller average run length (ARL) than the classical chart when there is a sustained shift in the process mean. The MRSS and ERSS methods are compared with RSS and SRS data, it turns out that MRSS dominates all other methods in terms of the out-of-control ARL performance. Real data are collected using the RSS, MRSS, and ERSS in cases of perfect and imperfect ranking. These data sets are used to construct the corresponding control charts. These charts are compared to usual SRS chart. Throughout this study we are assuming that the underlying distribution is normal. A check of the normality for our example data set indicated that the normality assumption is reasonable.     

Efficiency of ranked set sampling in entropy estimation and goodness-of-fit testing for the inverse Gaussian law

When measuring units are expensive or time consuming, while ranking them is relatively easy and inexpensive, it is known that ranked set sampling (RSS) is preferable to simple random sampling (SRS). Many authors have suggested several extensions of RSS. As a variation, Al-Saleh and Al-Kadiri [Double ranked set sampling, Statist. Probab. Lett. 48 (2000), pp. 205–212] introduced double ranked set sampling (DRSS) and it was extended by Al-Saleh and Al-Omari [Multistage ranked set sampling, J. Statist. Plann. Inference 102 (2002), pp. 273–286] to multistage ranked set sampling (MSRSS). The entropy of a random variable (r.v.) is a measure of its uncertainty. It is a measure of the amount of information required on the average to determine the value of a (discrete) r.v.. In this work, we discuss entropy estimation in RSS design and aforementioned extensions and compare the results with those in SRS design in terms of bias and root mean square error (RMSE). Motivated by the above observed efficiency, we continue to investigate entropy-based goodness-of-fit test for the inverse Gaussian distribution using RSS. Critical values for some sample sizes determined by means of Monte Carlo simulations are presented for each design. A Monte Carlo power analysis is performed under various alternative hypotheses in order to compare the proposed testing procedure with the existing methods. The results indicate that tests based on RSS and its extensions are superior alternatives to the entropy test based on SRS.     

A new sampling method for estimating the population mean

A double L ranked set sampling (DLRSS) method is suggested for estimating the population mean. The DLRSS is compared with the simple random sampling (SRS), ranked set sampling (RSS) and L ranked set sampling (LRSS) methods based on the same number of measured units. The conditions for which the suggested estimator performs better than the other estimators are derived. It is found that, the suggested DLRSS estimator is an unbiased of the population mean, and is more efficient than its counterparts using SRS, RSS, and LRSS methods. Real data sets are used for illustration.     

On the Kaplan–Meier estimator based on ranked set samples

When quantification of all sampling units is expensive but a set of units can be ranked, without formal measurement, ranked set sampling (RSS) is a cost-efficient alternate to simple random sampling (SRS). In this paper, we study the Kaplan–Meier estimator of survival probability based on RSS under random censoring time setup, and propose nonparametric estimators of the population mean. We present a simulation study to compare the performance of the suggested estimators. It turns out that RSS design can yield a substantial improvement in efficiency over the SRS design. Additionally, we apply the proposed methods to a real data set from an environmental study.     

Estimation of mean based on modified robust extreme ranked set sampling

In this paper, double robust extreme ranked set sampling (DRERSS) and its properties for estimating the population mean are considered. It turns out that, when the underlying distribution is symmetric, DRERSS gives unbiased estimators of the population mean. Also, it is found that DRERSS is more efficient than the simple random sampling (SRS), ranked set sampling (RSS), and extreme ranked set sampling (ERSS) methods. For asymmetric distributions considered in this study, the DRERSS has a small bias and it is more efficient than SRS, RSS, and ERSS. A real data set is used to illustrate the DRERSS method.     

Regression estimators in extreme and median ranked set samples

The ranked set sampling (RSS) method as suggested by McIntyre (1952) may be modified to come up with new sampling methods that can be made more efficient than the usual RSS method. Two such modifications, namely extreme and median ranked set sampling methods, are considered in this study. These two methods are generally easier to use in the field and less prone to problems resulting from errors in ranking. Two regression-type estimators based on extreme ranked set sampling (ERSS) and median ranked set sampling (MRSS) for estimating the population mean of the variable of interest are considered in this study and compared with the regression-type estimators based on RSS suggested by Yu & Lam (1997). It turned out that when the variable of interest and the concomitant variable jointly followed a bivariate normal distribution, the regression-type estimator of the population mean based on ERSS dominates all other estimators considered.     

Ranked set sampling with unequal samples for skew distributions

A ranked set sampling procedure with unequal samples for positively skew distributions (RSSUS) is proposed and used to estimate the population mean. The estimators based on RSSUS are compared with the estimators based on ranked set sampling (RSS) and median ranked set sampling (MRSS) procedures. It is observed that the relative precisions of the estimators based on RSSUS are higher than those of the estimators based on RSS and MRSS procedures.     

New two-stage sampling designs based on neoteric ranked set sampling

Neoteric ranked set sampling (NRSS) is a recently developed sampling plan, derived from the well-known ranked set sampling (RSS) scheme. It has already been proved that NRSS provides more efficient estimators for population mean and variance compared to RSS and other sampling designs based on ranked sets. In this work, we propose and evaluate the performance of some two-stage sampling designs based on NRSS. Five different sampling schemes are proposed. Through an extensive Monte Carlo simulation study, we verified that all proposed sampling designs outperform RSS, NRSS, and the original double RSS design, producing estimators for the population mean with a lower mean square error. Furthermore, as with NRSS, two-stage NRSS estimators present some bias for asymmetric distributions. We complement the study with a discussion on the relative performance of the proposed estimators. Moreover, an additional simulation based on data of the diameter and height of pine trees is presented.     

Robust extreme double ranked set sampling

As a well-known method for selecting representative samples of populations, ranked set sampling (RSS) has been considered increasingly in recent years. This (RSS) method has proved to be more efficient than the usual simple random sampling (SRS) for estimating most of the population parameters. In order to have a more efficient estimate of the population mean, a new sampling scheme called as robust extreme double ranked set sampling (REDRSS) is introduced and investigated in this paper. A simulation study shows that using REDRSS scheme gives more efficient estimates of population mean with smaller variance than the usual SRS, RSS and most other sampling schemes based on RSS estimators in non-uniform (symmetric or non-symmetric) distributions.     

Estimation of the means of the bivariate normal using moving extreme ranked set sampling with concomitant variable

The estimation of the means of the bivariate normal distribution, based on a sample obtained using a modification of the moving extreme ranked set sampling technique (MERSS) is considered. The modification involves using a concomitant random variable. Nonparametric-type methods as well as the maximum likelihood estimation are considered. The estimators obtained are compared to their counterparts based on simple random sampling (SRS). It appears that the suggested estimators are more efficient. Also, MERSS with concomitant variable is easier to use in practice than the usual ranked set sampling (RSS) with concomitant variable. The issue of robustness of the procedure is addressed. Real trees data set is used for illustration.     

Estimation of bivariate characteristics using ranked set sampling

The superiority of ranked set sampling (RSS) over simple random sampling (SRS) for estimating the mean of a population is well known. This paper introduces and investigates a bivariate version of RSS for estimating the means of two characteristics simultaneously. It turns out that this technique is always superior to SRS and the usual univariate RSS of the same size. The performance of this procedure for a specific distribution can be evaluated using simulation or numerical computation. For the bivariate normal distribution, the efficiency of the procedure with respect to that of SRS is evaluated exactly for set size m = 2 and 3. The paper shows that the proposed estimator is more efficient than the regression RSS estimators proposed by Yu & Lam (1997) and Chen (2001). Real data that consist of heights and diameters of 399 trees are used to illustrate the procedure. The procedure can be generalized to the case of multiple characteristics.     

Concomitant record ranked set sampling

In this work, we define a new method of ranked set sampling (RSS) which is suitable when the characteristic (variable) Y of primary interest on the units is jointly distributed with an auxiliary characteristic X on which one can take its measurement on any number of units, so that units having record values on X alone are ranked and retained for making measurement on Y. We name this RSS as concomitant record ranked set sampling (CRRSS). We propose estimators of the parameters associated with the variable Y of primary interest based on observations of the proposed CRRSS which are applicable to a very large class of distributions viz. Morgenstern family of distributions. We illustrate the application of CRRSS and our estimation technique of parameters, when the basic distribution is Morgenstern-type bivariate logistic distribution. A primary data collected by CRRSS method is demonstrated and the obtained data used to illustrate the results developed in this work.     

On Entropy-Based Test of Exponentiality in Ranked Set Sampling

When the sampling units can be easily ranked than quantified, ranked set sampling (RSS) is a viable alternative to the traditional simple random sampling (SRS). Much effort has been made for modifying basic RSS protocol with the aim of deriving more efficient estimators of the population attributes. Entropy has been seminal in developing measures of distributional disparities as a tool for statistical inference. This article is concerned with testing exponentiality based on sample entropy under some RSS-based designs. A simulation study shows that the proposed tests possess good power properties against several alternatives as compared with the ordinary test based on SRS.     

Partial groups ranked set sampling and mean estimation

Ranked set sampling (RSS) is an advanced sampling method which is very effective for estimating mean of the population when exact measurement of observation is difficult and/or expensive. Balanced Groups RSS (BGRSS) is one of the modification of RSS where only the lowest, the median and the largest ranked units are taken into account. Although BGRSS is advantageous and useful for some specific cases, it has strict restrictions regarding the set size which could be problematic for sampling plans. In this study, we make an improvement on BGRSS and propose a new design called Partial Groups RSS which offers a more flexible sampling plan providing the independence of the set size and sample size. Partial Groups RSS also has a cost advantage over BGRSS. We construct a Monte Carlo simulation study comparing the performance of the mean estimators of the proposed sampling design and BGRSS according to their sampling costs and mean squared errors for various type of distributions. In addition, we give a biometric data application for investigating the efficiency of Partial Groups RSS in real life applications.     

Estimation of the shape and scale parameters of Pareto distribution using ranked set sampling

In the current paper, the estimation of the shape and location parameters α and c, respectively, of the Pareto distribution will be considered in cases when c is known and when both are unknown. Simple random sampling (SRS) and ranked set sampling (RSS) will be used, and several traditional and ad hoc estimators will be considered. In addition, the estimators of α, when c is known using an RSS version based on the order statistic that maximizes the Fisher information for a fixed set size, will be considered. These estimators will be compared in terms of their biases and mean square errors. The estimators based on RSS can be real competitors against those based on SRS.     

Estimation of the distribution function under hybrid ranked set sampling

Recently, a hybrid ranked set sampling (HRSS) scheme has been proposed in the literature. The HRSS scheme encompasses several existing ranked set sampling (RSS) schemes, and it is a cost-effective alternative to the classical RSS and double RSS schemes. In this paper, we propose an improved estimator for estimating the cumulative distribution function (CDF) using HRSS. It is shown, both theoretically and numerically, that the CDF estimator under HRSS scheme is unbiased and its variance is always less than the variance of the CDF estimator with simple random sampling (SRS). An unbiased estimator of the variance of CDF estimator using HRSS is also derived. Using Monte Carlo simulations, we also study the performances of the proposed and existing CDF estimators under both perfect and imperfect rankings. It turns out that the proposed CDF estimator is by far a superior alternative to the existing CDF estimators with SRS, RSS and L-RSS schemes. For a practical application, a real data set is considered on the bilirubin level of babies in neonatal intensive care.     

Power comparison of the Kolmogorov–Smirnov test under ranked set sampling and simple random sampling

Many studies have been used to compare the power of several goodness-of-fit (GOF) tests under simple random sampling (SRS) and ranked set sampling (RSS). In our study, a different design procedure and ranking process in RSS are thoroughly investigated. A simulation study is conducted to compare the power of the Kolmogorov–Smirnov test under SRS and RSS with different sets and cycle sizes for several distributions. Level-2 sampling design and partially rank-ordered sets are used. Also, we benefited from auxiliary variables in the ranking process. Finally, results are presented with tables and figures. Under these conditions we show that the RSS has better performance against the SRS in finite population.     

Robust extreme ranked set sampling

In this paper, a robust extreme ranked set sampling (RERSS) procedure for estimating the population mean is introduced. It is shown that the proposed method gives an unbiased estimator with smaller variance, provided the underlying distribution is symmetric. However, for asymmetric distributions a weighted mean is given, where the optimal weights are computed by using Shannon's entropy. The performance of the population mean estimator is discussed along with its properties. Monte Carlo simulations are used to demonstrate the performance of the RERSS estimator relative to the simple random sample (SRS), ranked set sampling (RSS) and extreme ranked set sampling (ERSS) estimators. The results indicate that the proposed estimator is more efficient than the estimators based on the traditional sampling methods.     

Efficient estimators with categorical ranked set samples: estimation procedures for osteoporosis

Ranked set sampling (RSS) design as a cost-effective sampling is a powerful tool in situations where measuring the variable of interest is costly and time-consuming; however, ranking information about sampling units can be obtained easily through inexpensive and easy to measure characteristics at little or no cost. In this paper, we study RSS data for analysis of an ordinal population. First, we compare the problem of non-representative extreme samples under RSS and commonly-used simple random sampling. Using RSS data with tie information, we propose non-parametric and maximum likelihood estimators for population parameters. Through extensive numerical studies, we investigate the effect of various factors including ranking ability, tie generating mechanisms, the number of categories and population setting on the performance of the estimators. Finally, we apply the proposed methods to the bone disorder data to estimate the proportions of patients with osteopenia and osteoporosis status.     

Two-stage cluster sampling with hybrid ranked set sampling in the secondary sampling frame

In surveys of natural resources in agriculture, ecology, fisheries, forestry, environmental management, etc., cost-effective sampling methods are of major concern. In this paper, we propose a two-stage cluster sampling (TSCS) in integration with the hybrid ranked set sampling (HRSS)—named TSCS-HRSS—in the second stage of sampling for estimating the population mean. The TSCS-HRSS scheme encompasses several existing ranked set sampling (RSS) schemes and may help in selecting a smaller number of units to rank. It is shown both theoretically and numerically that the TSCS-HRSS provides an unbiased estimator of the population mean and it is more precise than the mean estimators based on TSCS with SRS and RSS schemes. An unbiased estimator of the variance of the proposed mean estimator is also derived. A similar trend is observed when studying the impact of imperfect rankings on the performance of the TSCS-HRSS based mean estimator.