Partially A-optimal blocked multi-factor designs

In this paper, we propose a partially A-optimal criterion for block designs where multiple factors are arranged. The number of levels of each factor is assumed to be arbitrary and unequal block sizes are allowed. A sufficient condition is derived for a design to be partially A-optimal among all feasible designs. Then the properties of the selected design and its relation with orthogonal arrays are studied. Methods of constructing designs satisfying the sufficient condition are also given.     

A-optimal design measures for one-way layouts with additive regression

For linear models with one discrete factor and additive general regression term the problem of characterizing A-optimal design measures for inference on (i) treatment effects, (ii) the regression parameters and (iii) all parameters will be considered. In any of these problems product designs can be found which are optimal among all designs, and equal weigth 1/J may be given to each of the J levels of the discrete factor. For problem (i) and (ii) the allocation of the continuous factors for the regression term should follow a suitable optimal design for the corresponding pure regression model, whereas for problem (iii) this would not give an A-optimal product design. For this problem an equivalence theorem for A-optimal product designs will be given. An example will illustrate these results. Finally, by analyzing a model with two discrete factors it will be shown that for enlarged models the best product designs may not be A-optimal.     

Optimal regression designs in the presence of random block effects

A- and D-optimal regression designs under random block-effects models are considered. We first identify certain situations where D- and A-optimal designs do not depend on the intra-block correlation and can be obtained easily from the optimal designs under uncorrelated models. For example, for quadratic regression on [−1,1], this covers D-optimal designs when the block size is a multiple of 3 and A-optimal designs when the block size is a multiple of 4. In general, the optimal designs depend on the intra-block correlation. For quadratic regression, we provide expressions for D-optimal designs for any block size. A-optimal designs with blocks of size 2 for quadratic regression are also obtained. In all the cases considered, robust designs which do not depend on the intrablock correlation can be constructed.     

On Exact K-optimal Designs Minimizing the Condition Number

A new design criterion based on the condition number of an information matrix is proposed to construct optimal designs for linear models, and the resulting designs are called K-optimal designs. The relationship between exact and asymptotic K-optimal designs is derived. Since it is usually hard to find exact optimal designs analytically, we apply a simulated annealing algorithm to compute K-optimal design points on continuous design spaces. Specific issues are addressed to make the algorithm effective. Through exact designs, we can examine some properties of the K-optimal designs such as symmetry and the number of support points. Examples and results are given for polynomial regression models and linear models for fractional factorial experiments. In addition, K-optimal designs are compared with A-optimal and D-optimal designs for polynomial regression models, showing that K-optimal designs are quite similar to A-optimal designs.     

A-optimal diallel crosses for test versus control comparisons

A-optimality of block designs for control versus test comparisons in diallel crosses is investigated. A sufficient condition for designs to be A-optimal is derived. Type S₀ designs are defined and A-optimal type S₀ designs are characterized. A lower bound to the A-efficiency of type S₀ designs is also given. Using the lower bound to A-efficiency, type S₀ designs are shown to yield efficient designs for test versus control comparisons.     

Computing A-optimal and E-optimal designs for regression models via semidefinite programming

In semidefinite programming (SDP), we minimize a linear objective function subject to a linear matrix being positive semidefinite. A powerful program, SeDuMi, has been developed in MATLAB to solve SDP problems. In this article, we show in detail how to formulate A-optimal and E-optimal design problems as SDP problems and solve them by SeDuMi. This technique can be used to construct approximate A-optimal and E-optimal designs for all linear and nonlinear regression models with discrete design spaces. In addition, the results on discrete design spaces provide useful guidance for finding optimal designs on any continuous design space, and a convergence result is derived. Moreover, restrictions in the designs can be easily incorporated in the SDP problems and solved by SeDuMi. Several representative examples and one MATLAB program are given.     

Bayes A-optimal designs for comparing test treatments with a control

The problem of comparing v test treatments simultaneously with a control treatment when k, v ⩾ 3 is considered. Following the work of Majumdar (1992), we use exact design theory to derive Bayes A-optimal block designs and optimal Г-minimax designs for a more general prior assumption for the one-way elimination of heterogeneity model. Examples of robust optimal designs, highly efficient designs, and the comparisons of the approximate optimal designs that are derived by our methods and by some other existing rounding-off schemes when using Owen's procedure are also provided.     

A-Optimal Block Designs with Additional Singly Replicated Treatments

Block designs to which have been added a number of singly-replicated treatments, known as secondary treatments, are particularly useful for experiments where only small amounts of material are available for some treatments, for example new plant varieties. The designs are of particular use in the microarray situation. Such designs are known as 'augmented designs'. This paper obtains the properties of these designs and shows that, with an equal number of secondary treatments in each block, the A-optimal design is obtained by using the A-optimal design for the original block design. It develops formulae for the variance of treatment comparisons, for both the primary and the secondary treatments. A number of examples are used to illustrate the results.     

Optimum designs for parameter estimation in a mixture experiment with two correlated responses

In this paper, we investigate a mixture problem with two responses, which are functions of the mixing proportions, and are correlated with known dispersion matrix. We obtain D- and A-optimal designs for estimating the parameters of the response functions, when none or some of the regression coefficients of the two functions are the same. It is shown that when no prior knowledge about the regression coefficients is available, the D-optimal design is independent of the dispersion matrix, while the A-optimal design depends on it, provided the response functions are of different degree. On the other hand, when some of the regression coefficients are known to be the same for both the functions, the D-optimal design depends on the dispersion matrix when the two response functions are not of the same degree.     

Some as-optimal designs and their a-efficiencies

For polynomial regression over spherical regions, the d-th order As-optimal designs for γ-th order models are derived for 4 ≥ d > γ≥l. Efficiencies of these designs with respect to the γ-th order A-optimal designs are obtained. Furthermore, the effects of estimating intermediate m-th order models on these efficiencies are examined for d > m > γ     

Connectedness of complete block designs under an interference model

We consider an experiment with fixed number of blocks, in which a response to a treatment can be affected by treatments from neighboring units. For such experiment the interference model with neighbor effects is studied. Under this model we study connectedness of binary complete block designs. Assuming the circular interference model with left-neighbor effects we give the condition for minimal number of blocks necessary to obtain connected design. For a specified class of binary, complete block designs, we show that all designs are connected. Further we present the sufficient and necessary conditions of connectedness of designs with arbitrary, fixed number of blocks.     

A-optimal partially balanced fractional 2m1+m2 factorial designs of resolution V,with 4≤m1>+m2≤6

By use of the algebraic structure, we obtain an explicit expression for the characteristic polynomial of the information matrix of a partially balanced fractional 2^m₁+m₂ factorial design of resolution V derived from a partially balanced array. For 4≤m₁+m₂≤6, A-optimal designs considered here are also presented for reasonable number of assemblies.     

Minimax designs for estimating slopes in a trigonometric regression model

Abstract

Designs for the first order trigonometric regression model over an interval on the real line are considered for the situation where estimation of the slope of the response surface at various points in the factor space is of primary interest. Minimization of the variance of the estimated slope at a point maximized over all points in the region of interest is taken as the design criterion. Optimal designs under the minimax criterion are derived for the situation where the design region and the region of interest are identical and a symmetric “partial cycle”. Some comparisons of the minimax designs with the traditional D- and A-optimal designs are provided. Efficiencies of some exact designs under the minimax criterion are also investigated.     

The A-optimal non-saturated weighing designs for n = 15 observations

The problem of constructing A-optimal weighing and first order fractional factorial designs for n ≡ 3 mod 4 observations is considered. The non-existence of the weighing design matrices for n = 15 observations and k = 13, 14 factors, for which the corresponding information matrices have inverses with minimum trace, is proved. These designs are the first non-saturated cases (k < n) in which the unattainability of Sathe and Shenoy's (1989) lower bound on A-optimality is shown. Using an algorithm proposed in Farmakis (1991) we construct 15 × k (+1, −1)-matrices for k = 13, 14 and we prove their A-optimality using the improved (higher) lower bounds on A-optimality established by Chadjiconstantinidis and Kounias (1994). Also the A-optimal designs for n = 15, k ⩽ 12 are given.     

Optimal blocked main effects plans

In this paper, we consider the construction of optimal blocked main effects designs where m two-level factors are to be studied in N runs which are partitioned into b blocks of equal size. For N ≡ 2±od4 sufficient conditions are derived for a design to be Φ _f optimal among all designs having main effects occurring equally often at their high and low levels within blocks and then this result is extended to the class of all designs for the case when the block size is two. Methods of constructing designs satisfying the sufficient conditions derived are also given.     

Regular A-optimal design matrices X = (xij) with xij = ?1, 0, 1

New construction methods of the regular A-optimal design matrices with elements −1, 0, 1 are presented, under assumption of nonhomogeneity of variance error. The presented constructions are based on the incidence matrices of the balanced bipartite weighing designs.     

Strategies for Cohort Sampling Under the Cox Proportional Hazards Model,Application to an AIDS Clinical Trial

In some studies that relate covariates to times of failure it is not feasible to observe all covariates for all subjects. For example, some covariates may be too costly in terms of time, money, or effect on the subject to record for all subjects. This paper considers the relative efficiencies of several designs for sampling a portion of the cohort on which the costly covariates will be observed. Such designs typically measure all covariates for each failure and control for covariates of lesser interest. Control subjects are sampled either from risk sets at times of observed failures or from the entire cohort. A new design in which the sampling probability for each individual depends on the amount of information that the individual can contribute to estimated coefficients is shown to be superior to other sampling designs under certain conditions. Primary focus of our designs is on time-invariant covariates, but some methods easily generalize to the time-varying setting. Data from a study conducted by the AIDS Clinical Trials Group are used to illustrate the new sampling procedure and to explore the relative efficiency of several sampling schemes.     

Optimum covariate designs in partially balanced incomplete block (PBIB) design set-ups

The use of covariates in block designs is necessary when the covariates cannot be controlled like the blocking factor in the experiment. In this paper, we consider the situation where there is some flexibility for selection in the values of the covariates. The choice of values of the covariates for a given block design attaining minimum variance for estimation of each of the parameters has attracted attention in recent times. Optimum covariate designs in simple set-ups such as completely randomised design (CRD), randomised block design (RBD) and some series of balanced incomplete block design (BIBD) have already been considered. In this paper, optimum covariate designs have been considered for the more complex set-ups of different partially balanced incomplete block (PBIB) designs, which are popular among practitioners. The optimum covariate designs depend much on the methods of construction of the basic PBIB designs. Different combinatorial arrangements and tools such as orthogonal arrays, Hadamard matrices and different kinds of products of matrices viz. Khatri–Rao product, Kronecker product have been conveniently used to construct optimum covariate designs with as many covariates as possible.     

Weighted A-optimality for fractional 2m factorial designs of resolution V

A weighted A-optimality (WA-optimality) criterion is discussed for selecting a fractional 2^m factorial design of resolution V. A WA-optimality criterion having one weight may be considered for designs. It is shown that designs derived from orthogonal arrays are WA-optimal for any weight. From a WA-optimal design, a procedure for finding WA-optimal designs for various weights is given. WA-optimal balanced designs are presented for 4 ⩽ m ⩽ 7 and for the values of n assemblies in certain ranges. It is pointed out that designs for m = 7 and for n = 41, 42 given in Chopra and Srivastava (1973a) or in the corrected paper by Chopra et al. (1986), are not A-optimal.     

Optimal repeated measurements designs for comparing test treatments with a control

A-optimal and mv optimal repeated measurments designs for comparing serveral test treatments with a control are considered. the models considered are basically of two types: without preperides and the cirular model. It is shown known that some known strongly balanced uniform repeated measurements designs can be modified to obtain optimal designs for this problem. Some other methods of finding optimal designs are also given.