Continuous single attribute control chart for Markov-dependent processes

Most of the times, the observations related to the quality characteristic of a process do not need to be independent. In such cases, control charts based on the assumption of independence of the observations are not appropriate. When the characteristic under study is qualitative, Markov model serves as a simple model to account for the dependency of the observations. For this purpose, we develop an attribute control chart under 100% inspection for a Markov dependent process by controlling the error probabilities. This chart consists of two sub-charts. For a given sample, depending upon the state of the last observation of previous sample (if any), one of these two will be used. Optimal values of the design parameters of the control chart are obtained. Chart’s performance is studied by using its capability (probability) of detecting a shift in process parameters.     

Phase II Monitoring of Nonlinear Profiles

In many practical cases, the quality of a product or process is characterized by multiple measurements constituting a line or curve that is referred to as a profile. In this article, we develop two approaches for monitoring process and product nonlinear profiles. The first approach consists of control chart methods to monitor nonlinear profiles using parametric estimates of regression model. In order to avoid the problems arising from complexity of coefficient estimation of nonlinear profiles, the second approach, which consists of using metrics to measure deviation from a reference curve, is proposed. The performance of the methods is evaluated through a numerical example using average run length criterion. The effect of sample size on the performance of both approaches is also investigated in this article.     

Considering Taguchi loss function on statistically constrained economic sum of squares exponentially weighted moving average charts

In this paper, Duncan's cost model combined Taguchi's quadratic loss function is applied to develop the economic-statistical design of the sum of squares exponentially weighted moving average (SS-EWMA) chart. The genetic algorithm is applied to search for the optimal decision variables of SS-EWMA chart such that the expected cost is minimized. Sensitivity analysis reveals that the optimal sample size and sampling interval decrease; optimal smoothing constant and control limit increase as the mean and/or variance increases. Moreover, the combination of optimal parameter levels in orthogonal array experiment plays an important guideline for monitoring the process mean and/or variance.     

Economic design of quick switching sampling system for assuring Weibull distributed mean life

In this paper, we propose the quick switching sampling system for assuring mean life of a product under time truncated life test where the lifetime of the product follows the Weibull distribution and the mean life is considered as the quality of the product. The optimal parameters of the proposed system are determined using two points on the operating characteristic curve approach for various combinations of consumer's risk and ratio of true mean life time and specified life time. Tables are constructed to determine the optimal parameters for specified acceptable quality level and limiting quality level along with the corresponding probabilities of acceptance. The proposed system is compared with other existing sampling plans under Weibull lifetime model. In addition, an economical design of the proposed system is also discussed.     

Designing of variables quick switching sampling system by considering process loss functions

This paper proposes a variables quick switching system where the quality characteristic of interest follows a normal distribution and the quality characteristic is evaluated through a process loss function. Most of the variables sampling plans available in the literature focus only on the fraction non-conforming and those plans do not distinguish between the products that fall within the specification limits. The products that fall within specification limits may not be good if their mean is too away from the target value. So developing a sampling plan by considering process loss is inevitable in these situations. Based on this idea, we develop a variables quick switching system based on the process loss function for the application of the processes requiring low process loss. Tables are also constructed for the selection of parameters of variables quick switching system for given acceptable quality level and limiting quality level. The results are explained with examples.     

Design of adaptive s control charts

The Shewhart s chart has been widely used to monitor the standard deviation of a process. However, the main disadvantage of an s chart is its slowness to signal small increases in the variability. In this paper, ideas of adaptive control charts are extended to the Shewhart s chart for improving the efficiency in signalling increases in the standard deviation. A Markov chain model is applied to evaluate its performances and compares its performances with combined double sampling and variable sampling intervals s chart, variable parameters (VP) R chart, exponentially weighted moving average and Cusum charts. The statistical performances show that the VP s chart is more sensitive to increases in standard deviation.     

Two-Stage Variables Acceptance Sampling Plans Using Process Loss Functions

In this article, a variable two-stage acceptance sampling plan is developed when the quality characteristic is evaluated through a process loss function. The plan parameters of the proposed plan are determined by using the two-point approach and tabulated according to various quality levels. Two cases are discussed when the process mean lies at the target value and when it does not, respectively. Extensive tables are provided for both cases and the results are explained with examples. The advantage of the proposed plan is compared with the existing variable single acceptance sampling plan using the process loss function.     

Optimal designing of skip-lot sampling plan of type SkSP-2 with group acceptance sampling plan as reference plan under Burr-type XII distribution

In this paper, skip-lot sampling plan of type SkSP-2 with group acceptance sampling plans is proposed when the lifetime of the product follows the Burr-type XII distributions. The optimal parameters of the proposed plan are determined when two points on operating characteristics curve namely acceptable quality level and limiting quality level and the number of testers are specified. We also considered the Burr-type XII distribution to find the plan parameters. Several tables are given for practical use. We compare the results of proposed plan with the existing plans. Results are explained using real-world examples.     

Identification of out of control quality characteristics in a multivariate manufacturing environment

There are many instances in which the quality of a product or constancy of a process is determined by the joint levels of several attributes or properties. During the conduct of such a process or the production of such a product, one wishes to detect as quickly as possible any departure from a satisfactory state, while at the same time identifying which attributes are responsible for the deviation. In most cases of practical interest, however, there exist correlations among the several properties of interest; this makes it advisable to monitor certain aggregate characteristics of the process, rather than observing its various components separately. When the mean vector of the quality attributes is the major concern, this aggregate monitoring function is most commonly implemented via a T ² chart. The dependencies among attributes, however, complicate the determination of which are responsible when a deviation occurs. This paper presents an approach to help identify aberrant variables when Shewhart type multivariate control charts based on Hotelling's T ² are in use.     

A new sampling plan under the exponential distribution

This article considers a sampling plan when the quality characteristic follows the exponential distribution. We provide the exact approach and propose an approximated approach. In the proposed approximation, a new statistic combined with a Weibull transformation is used for the normal approximation. The plan parameters are obtained through the two-point approach at the acceptable quality level (AQL) and the limiting quality level (LQL). The tables for plan parameters are reported according to various values of the AQL and the LQL when the producer's and the consumer's risks are given. A real example is given to illustrate the proposed approximation approach.     

A group acceptance sampling plan for truncated life test having Weibull distribution

In this paper, a group acceptance sampling plan for a truncated life test is proposed when a multiple number of items as a group can be tested simultaneously in a tester, assuming that the lifetime of a product follows the Weibull distribution with a known shape parameter. The design parameters such as the number of groups and the acceptance number will be determined by satisfying the producer's and the consumer's risks at the specified quality levels, while the termination time and the number of testers are specified. The results are explained with tables and examples.     

Monitoring process mean using generally weighted moving average chart for exponentially distributed characteristics

In this article, we will present a control chart using normal transformation and generally weighted moving average (GWMA) statistic when the quality characteristic follows the exponential distribution. We will develop the necessary measures to monitor the mean of the process using GWMA statistic and analyze the performance using simulation. The average run lengths for monitoring process average are given for various process shifts. The performance of the proposed chart is examined and compared with the existing control chart. The proposed control chart is effective for the monitoring of small shifts in the mean process. The application of the proposed chart is illustrated with the help of simulated data.     

A new non-parametric multivariate EWMA sign control chart for monitoring process dispersion

In this paper, a new non-parametric multivariate exponentially weighted moving average (NMEWMA) sign chart is proposed for monitoring the process dispersion. The run length characteristics of the NMEWMA sign chart are computed with the help of Markov chain and Monte Carlo simulations. Moreover, the NMEWMA sign chart is also used to detect changes in the process mean and dispersion simultaneously. An illustrative example is also used to explain the implementation of proposed control chart.     

ARL Performance of the Tukey's Control Chart

A Tukey's control chart was designed to monitor single observation data. Its easy control-limits setting and simple statistical concept are the most important advantages. In this study, we setup the Tukey's control chart based on known probability distribution and construct its average run length calculator. ARL performance of the Tukey's control chart is evaluated under a normal distribution and non normal distributions, respectively. The comparison of ARL performance reveals that Tukey's control chart is not sensitive to shift detection when the process heavily violates the normal assumption. The number of observations needed for Tukey's control chart setup is less than Shewhart's control chart. Tukey's control chart is a better choice for the process mean monitoring.     

Bootstrap-Based T 2 Multivariate Control Charts

Control charts have been used effectively for years to monitor processes and detect abnormal behaviors. However, most control charts require a specific distribution to establish their control limits. The bootstrap method is a nonparametric technique that does not rely on the assumption of a parametric distribution of the observed data. Although the bootstrap technique has been used to develop univariate control charts to monitor a single process, no effort has been made to integrate the effectiveness of the bootstrap technique with multivariate control charts. In the present study, we propose a bootstrap-based multivariate T ² control chart that can efficiently monitor a process when the distribution of observed data is nonnormal or unknown. A simulation study was conducted to evaluate the performance of the proposed control chart and compare it with a traditional Hotelling's T ² control chart and the kernel density estimation (KDE)-based T ² control chart. The results showed that the proposed chart performed better than the traditional T ² control chart and performed comparably with the KDE-based T ² control chart. Furthermore, we present a case study to demonstrate the applicability of the proposed control chart to real situations.     

Study of a Markov model for a high-quality dependent process

For high-quality processes, non-conforming items are seldom observed and the traditional p (or np) charts are not suitable for monitoring the state of the process. A type of chart based on the count of cumulative conforming items has recently been introduced and it is especially useful for automatically collected one-at-a-time data. However, in such a case, it is common that the process characteristics become dependent as items produced one after another are inspected. In this paper, we study the problem of process monitoring when the process is of high quality and measurement values possess a certain serial dependence. The problem of assuming independence is examined and a Markov model for this type of process is studied, upon which suitable control procedures can be developed.     

Skewness Reduction Approach in Multi-Attribute Process Monitoring

Since the product quality of many industrial processes depends upon more than one dependent variable or attribute, they are either multivariate or multi-attribute in nature. Although multivariate statistical process control is receiving increased attention in the literature, little work has been done to deal with multi-attribute processes. In this article, we develop a new methodology to monitor multi-attribute processes. To do this, first we transform multi-attribute data in a way that their marginal probability distributions have almost zero skewness. Then, we estimate the transformed covariance matrix and apply the well-known T ² control chart. In order to illustrate the proposed method and evaluate its performance, we use two simulation experiments and compare the results with the ones from both MNP chart and the χ² control chart.     

An adaptive exponentially weighted moving average control chart for monitoring process variances

The exponentially weighted moving average (EWMA) control chart is efficient in detecting small changes in process parameters but less efficient when the changes are relatively large, due to what is known as the inertia problem. To diminish the inertia, an adaptive EWMA (AEWMA) chart has been proposed for monitoring process locations to improve over the traditional EWMA charts. The basic idea of the AEWMA scheme is to dynamically weight the past observations according to a suitable function of the current prediction error. This article extends the idea of the AEWMA chart for monitoring process locations to the case of monitoring process dispersion. A Markov chain model is established to analyze and design the suggested chart. It is shown that the AEWMA dispersion chart performs better than the EWMA and other dispersion charts in terms of its ability to perform relatively well at both small and large changes in process dispersion.     

Exponentially weighted moving average control charts for three-level products

In this paper, exponentially weighted moving average (EWMA) control charts for multinomial data are developed with a three-level classification scheme. The lower and upper control limits of the proposed EWMA control chart are evaluated using Markov chain approximation. Compared with the three-level Shewhart control chart, numerical results indicate that the proposed EWMA control chart is relatively sensitive to small shifts in a three-level multinomial process. A figure and a table are provided for practitioners to select the value of chart limit coefficient that gives the desired in-control average run length.