A comparison of random balance and two-stage group screening designs: A case study

In this paper we focus on the problem of supersaturated (fewer runs than factors) screening experiments. We consider two major types of designs which have been proposed in this situ¬ation: random balance and two-stage group screening. We discuss the relative merits and demerits of each strategy. In addition, we compare the performance of these strategies by means of a case study in which 100 factors are screened in 20,42,62, and 84 runs.     

A class of new pbib designs

Two series of PBIB designs, one with three associate classes and theother with four associate classes ars developed. Efficiency factors for two designs are computed.     

On the construction of orthogonal factorial designs of resolution 11

A new method of construction of orthogonal resolution IV designs for symmetrical and asymmetrical factorials has been presented. Many new series of orthogonal factorial designs of resolution IV can be obtained by the above general method.     

A new variable selection method for uniform designs

As an important class of space-filling designs, uniform designs (UDs) choose a set of points over a certain domain such that these points are uniformly scattered, under a specific discrepancy measure. They have been applied successfully in many industrial and scientific experiments since they appeared in 1980. A noteworthy and practical advantage is their ability to investigate a large number of high-level factors simultaneously with a fairly economical set of experimental runs. As a result, UDs can be properly used as experimental plans that are intended to derive the significant factors from a list of many potential ones. To this end, a new screening procedure is introduced via penalized least squares. A simulation study is conducted to support the proposed method, which reveals that it can be considered quite promising and expedient, as judged in terms of Type I and Type II error rates.     

A method for constructing supersaturated designs and its Es2 optimality

A lower bound for the Es² value of an arbitrary supersaturated design is derived. A general method for constructing supersaturated designs is proposed and shown to produce designs with n runs and m = k(n — 1) factors that achieve the lower bound for Es² and are thus optimal with respect to the Es² criterion. Within the class of designs given by the construction method, further discrimination can be made by minimizing the pairwise correlations and using the generalized D and A criteria proposed by Wu (1993). Efficient designs of 12, 16, 20 and 24 runs are constructed by following this approach.     

Some new construction of circular weakly balanced repeated measurements designs in periods of two different sizes

Abstract

Balanced repeated measurements designs (RMDs) balance out the residual effects. Williams Latin square designs work as minimal combinatorial balanced as well as variance balanced for RMDs for p (period sizes) = v (number of treatments). If minimal balanced RMDs cannot be constructed for the situations where p must be less than v then weakly balanced RMDs should be preferred. In this article, some generators are developed to generate circular weakly balanced RMDs in periods of two different sizes. To obtain the proposed designs, some construction procedures are also described for some of the cases where we could not develop generators.     

Orthogonal blocking of response surface split-plot designs

When all experimental runs cannot be performed under homogeneous conditions, blocking can be used to increase the power for testing the treatment effects. Orthogonal blocking provides the same estimator of the polynomial effects as the one that would be obtained by ignoring the blocks. In many real-life design scenarios, there is at least one factor that is hard to change, leading to a split-plot structure. This paper shows that for a balanced ordinary least square–generalized least square equivalent split-plot design, orthogonal blocking can be achieved. Orthogonally blocked split-plot central composite designs are constructed and a catalog is provided.     

On the existence of linear trend free block designs

We present a class of counerexamples for a conjecture on the existence or linear trend free block designs we will also prove a considerably weakened version of this conjecture which will determine all combinations of designs parmetres for which the class of linear trend free block designs is non empty.     

Orthogonal three-level parallel flats designs for user-specified resolution

Orthogonal factorial and fractional factorial designs are very popular in many experimental studies, particularly the two-level and three-level designs used in screening experiments. When an experimenter is able to specify the set of possibly nonnegligible factorial effects, it is sometimes possible to obtain an orthogonal design belonging to the class of parallel flats designs, that has a smaller run-size than a suitable design from the class of classical fractional factorial designs belonging to the class of single flat designs. Sri-vastava and Li (1996) proved a fundamental theorem of orthogonal s-level, s being a prime, designs of parallel flats type for the user-specified resolution. They also tabulated a series of orthogonal designs for the two-level case. No orthogonal designs for three-level case are available in their paper. In this paper, we present a simple proof for the theorem given in Srivastava and Li (1996) for the three-level case. We also give a dual form of the theorem, which is more useful for developing an algorithm for construction of orthogonal designs. Some classes of three-level orthogonal designs with practical run-size are given in the paper.     

Efficient three-level screening designs using weighing matrices

Screening is the first stage of many industrial experiments and is used to determine efficiently and effectively a small number of potential factors among a large number of factors which may affect a particular response. In a recent paper, Jones and Nachtsheim [A class of three-level designs for definitive screening in the presence of second-order effects. J. Qual. Technol. 2011;43:1–15] have given a class of three-level designs for screening in the presence of second-order effects using a variant of the coordinate exchange algorithm as it was given by Meyer and Nachtsheim [The coordinate-exchange algorithm for constructing exact optimal experimental designs. Technometrics 1995;37:60–69]. Xiao et al. [Constructing definitive screening designs using conference matrices. J. Qual. Technol. 2012;44:2–8] have used conference matrices to construct definitive screening designs with good properties. In this paper, we propose a method for the construction of efficient three-level screening designs based on weighing matrices and their complete foldover. This method can be considered as a generalization of the method proposed by Xiao et al. [Constructing definitive screening designs using conference matrices. J. Qual. Technol. 2012;44:2–8]. Many new orthogonal three-level screening designs are constructed and their properties are explored. These designs are highly D-efficient and provide uncorrelated estimates of main effects that are unbiased by any second-order effect. Our approach is relatively straightforward and no computer search is needed since our designs are constructed using known weighing matrices.     

On the construction of optimal designs

Two strategies for specifying additional data to be included with the data of a non-orthogonal design are presented. The additional data increase the magnitude of the information matrix X′X and the orthogonality of the design matrix. Sequentially, the new points are augmented to the original design, such that each new point optimally increases the smallest eigenvalue of X′X. The new runs are created in a predefined spherical region and a rectangular region. Optimum number of additional observations is presented in order to orthogonalize the design matrix X and optimize some functions of the information matrix X′X. Comparisons of the results acquired with the proposed methods versus the most commonly used procedures for data augmentation are carried out. In addition, the advantages of the use of our techniques over the studied methods to solve the augmenting data problems are discussed.     

Super-simple cyclic designs with small values

Super-simple cyclic designs are useful on constructing codes and designs such as superimposed codes, perfect hash families and optical orthogonal codes with index two. In this paper, we show that there exists a super-simple cyclic (v,4,λ)$(v,4,\lambda )$ for 7?v?41$7?v?41$ and all admissible λ$\lambda$ with two definite exceptions of (v,λ)=(9,3),(13,5)$(v,\lambda )=(9,3),(13,5)$ and one possible exception of (v,λ)=(39,18)$(v,\lambda )=(39,18)$. Some useful algorithms are explained for computer search and new designs are displayed.     

Some new constructions of circular balanced repeated measurements designs

Repeated measurements designs are widely used in medicine, pharmacology, animal sciences, and psychology. In this article, some infinite series are developed to generate the balanced repeated measurements designs for p (periods) even. For p odd, construction procedures are also described. Catalogues of the proposed designs are also presented for p = 5, 7, 9, when v ≤ 100.     

The performance of multistage group screening designs

This article deals with multistage group screening in which group-factors contain the same number of factors. A usual assumption of this procedure is that the directions of possible effects are known. In practice, however, this assumption i s often unreasonable. This paper examines, in the case of no errors in observations, the performance of multistage group screening when this assumption is false . This enails consideration of cancellation effects within group-factors.     

A note on the connectivity of generalized cyclic designs

A necessary and sufficient condition is given to ensure that a generating blook of a generalized cyclic design will give rise to a connected design. The use of disconnected designs is briefly discussed.     

Mixture designs with orthogonal blocks

Constructions of blocked mixture designs are considered in situations where BLUEs of the block effect contrasts are orthogonal to the BLUEs of the regression coefficients. Orthogonal arrays (OA), Balanced Arrays (BAs), incidence matrices of balanced incomplete block designs (BIBDs), and partially balanced incomplete block designs (PBIBDs) are used. Designs with equal and unequal block sizes are considered. Also both cases where the constants involved in the orthogonality conditions depend and do not depend on the factors have been taken into account. Some standard (already available) designs can be obtained as particular cases of the designs proposed here.     

Sure independence screening for analyzing supersaturated designs

ABSTRACT

Supersaturated designs (SSDs) constitute a large class of fractional factorial designs which can be used for screening out the important factors from a large set of potentially active ones. A major advantage of these designs is that they reduce the experimental cost dramatically, but their crucial disadvantage is the confounding involved in the statistical analysis. Identification of active effects in SSDs has been the subject of much recent study. In this article we present a two-stage procedure for analyzing two-level SSDs assuming a main-effect only model, without including any interaction terms. This method combines sure independence screening (SIS) with different penalty functions; such as Smoothly Clipped Absolute Deviation (SCAD), Lasso and MC penalty achieving both the down-selection and the estimation of the significant effects, simultaneously. Insights on using the proposed methodology are provided through various simulation scenarios and several comparisons with existing approaches, such as stepwise in combination with SCAD and Dantzig Selector (DS) are presented as well. Results of the numerical study and real data analysis reveal that the proposed procedure can be considered as an advantageous tool due to its extremely good performance for identifying active factors.     

Optimum covariate designs in split-plot and strip-plot design set-ups

The problem considered is that of finding optimum covariate designs for estimation of covariate parameters in standard split-plot and strip-plot design set-ups with the levels of the whole-plot factor in r randomised blocks. Also an extended version of a mixed orthogonal array has been introduced, which is used to construct such optimum covariate designs. Hadamard matrices, as usual, play the key role for such construction.     

On the construction of group divisible incomplete block designs

In this paper a method of constructing group-divisible incomplete block designs has been suggested. A series of balanced incomplete block designs has also been obtained.     

A review of optimal designs in survey sampling

Results in five areas of survey sampling dealing with the choice of the sampling design are reviewed. In Section 2, the results and discussions surrounding the purposive selection methods suggested by linear regression superpopulation models are reviewed. In Section 3, similar models to those in the previous section are considered; however, random sampling designs are considered and attention is focused on the optimal choice of π_j. Then in Section 4, systematic sampling methods obtained under autocorrelated superpopulation models are reviewed. The next section examines minimax sampling designs. The work in the final section is based solely on the randomization. In Section 6 methods of sample selection which yield inclusion probabilities π_j = n/N and π_ij = n(n - 1)/N(N - 1), but for which there are fewer than _NC_n possible samples, are mentioned briefly.