Design of generalized CSP-C continuous sampling plan

In this paper, the concept acceptance number has been incorporated to the single level continuous sampling plan CSP-1. The advantage of the proposed plan, designated as the CSP-C plan, is to achieve a reduction in the average fraction inspected at good quality levels. Nomographs for the design of the proposed plan are presented. The expressions of the performance measures for this new plan such as OC, AOQ and AFI are also provided.     

Average outgoing quality of CSP-C continuous sampling plan under short run production processes

A CSP-C continuous sampling plan is a new single-level continuous sampling procedure developed by Govindaraju & Kandasamy (2000) by incorporating the concept of acceptance number to the CSP-1 plan for the application of continuous production processes. In this new plan, the sampling inspection phase is characterized by a maximum allowable number of non-conforming units, c, and a constant sampling rate, f. Govindaraju & Kandasamy (2000) derived the performance measures such as average outgoing quality (AOQ), average fraction inspected (AFI) etc, of the CSP-C plan using a Markov chain model for long run production processes. Yang (1983) has observed that the AOQ and AFI, being long run average measures, are not satisfactory measures of performance for short run production processes. Hence, formulas are derived in this paper, using the renewal theory approach enabling one to compute AOQ and AFI for both long run and short run production processes. Numerical illustrations are also given. By simulation, the accuracy of the short run measures is studied.     

Minimum average fraction inspected for short-run CSP-1 plan

This paper presents details of the calculation of the average outgoing quality limit (AOQL) for a short-run CSP-1 plan based on Y ang's renewal process approach. A solution procedure is developed to find the unique combination (i,f) that will meet the AOQL requirement, while also minimizing the average fraction inspected for the shortrun CSP-1 plan when the process average p (> AOQL) and production run length R are known.     

Minimum average fraction inspected for TCSP-1 plan

This paper presents the calculation of the average outgoing quality limit (AOQL) for the tightened single-level continuous sampling plan (TCSP-1 plan) based on a numerical method. A solution procedure is developed to find the parameters (i, f, k) that will meet the AOQL requirement, while also minimizing the average fraction inspected (AFI) for the TCSP-1 plan when the process average [pbar] (> AOQL) is known.     

Design of a CSP-1 plan based on regret-balanced criterion

This article explores the problem of designing a CSP-1 plan with the specified average outgoing quality limit (AOQL), the acceptable quality level (AQL), and the limiting quality level (LQL) value. By adopting the regret-balanced criterion under the producer's and consumer's interests of quality, we can design the optimal CSP-1 plan.     

Matching Performance of Continuous Sampling Plans with Single Sampling Plans

Single sampling plans are widely used for appraising incoming product quality. However, for situations where a continuous product flow exists, lot-by-lot demarcations may not exist, and it may be necessary to use alternate procedures, such as CSP-1, for continuous processes. In this case, one would like to be able to understand how average performance of the continuous sampling procedures compares to the more commonly used single sampling plans.

In this study, a model is devised which can be used to relate plan performance between single sample lot acceptance procedures and Dodge's(1943) CSP-1 continuous sampling plan. It is shown that it is generally not possible to match up performance based upon operating characteristic curve expressions for the two plans. Instead, the plans are matched by equating expressions for π(p), the long run proportion of product which is accepted, under both procedures. This is shown to be equivalent to matching up properties on an average outgoing quality basis. The methodology may be extended for any derivative plan under MIL-STD-1235B (1982), the military standard for continuous acceptance sampling.     

Tightened single-level continuous sampling plan

In this paper, a new tightening concept has been incorporated into the single-level continuous sampling plan CSP-1, such that quality degradation will warrant sampling inspection to cease beyond a certain number of sampled items, until new evidence of good quality is established. The expressions of the performance measures for this new plan, such as the operating characteristic, average outgoing quality and average fraction inspected, are derived using a Markov chain model. The advantage of the tightened CSP-1 plan is that it is possible to lower the average outgoing quality limit.     

Economic design of continuous sampling plan under linear inspection cost

The article explores the problem of an economically based type I continuous sampling plan (CSP-1 plan) under linear inspection cost. By assuming that the per unit inspection cost is linearly proportional to the average number of inspections per inspection cycle, and by solving the modified Cassady et al.'s model, we not only have the required level of product quality but also obtain the minimum total expected cost per unit produced.     

Modified CSP-C Continuous Sampling Plan for Consumer Protection

Dodge (1943) introduced a single level attribute continuous sampling plan designated as CSP-1 for the application of continuous production processes. Govindaraju & Kandasamy (2000) developed a new single level continuous sampling plan whose sampling inspection phase is characterized by a maximum allowable number of non-conforming units c, and a constant sampling rate f and was designated as CSP-C. In this paper, a modification is proposed on the CSP-C continuous sampling plan. In this modified plan, sampling inspection is continued until the occurrence of c+1 non-conforming units, provided the first m sampled units have been found conforming during the sampling phase. Using a Markov chain model, expressions for the performance measures of the modified CSP-C plan are derived. The main advantage of the modified plan is that it is possible to lower the average outgoing quality limit.     

Design and evaluation of skip-lot sampling plans of type SkSP-3

This paper presents a system of skip-lot sampling inspection plans designated as SkSP-3 based on the principle of a continuous sampling plan of type CSP-2. Expressions for performance measures such as Operating Characteristic function and ASN function are derived by the Markov chain approach. Selection of SkSP-3 with a single sampling plan having acceptance number zero as the reference plan is discussed.     

Selection of CSP-V continuous sampling plans

MIL-STD-1235C establishes standard procedures for the selection and implementation of single- and multi-level continuous sampling plans, such as CSP-1, CSP-F, CSP-2, CSP-T and CSP-V. CSP-V is a single-level continuous sampling procedure which provides for alternating sequences of 100%inspection (either at full or reduced clearance number) and sampling inspection. It requires a return to 100% inspection whenever a non-confirming unit is found during sampling inspection, but provides for a reduced clearance number upon demonstration of superior product quality. The CSP-V procedure serves as an alternative to the CSP-T procedure where a reduction in sampling frequency has no economic merit. In this paper, expressions for the average outgoing quality, the average fraction inspected and the operating characteristic function are derived using a Markov chain model. Four tables are given to enable the selection of CSP-V plans when the acceptable quality level or the limiting quality level and the

average outgoing quality limit are specified.     

Minimum Average Total Inspection of Variable Lot-size Sampling Plan for Continuous Production

This paper explores the problem of minimizing the average total inspection (ATI) of Read & Beattie's variable lot-size sampling plan for continuous production. The solution procedure is developed to find the optimal parameters (n,  c) that will meet the average outgoing quality limit (AOQL) requirement, while also minimizing the ATI for this variable lot-size plan.     

Continuous inspection of Markov processes with a clearance interval

Dodge's continuous sampling plan-1 (CSP-1) with clearance interval zero may be inefficient if there is serial correlation between successive units which are Markov dependent and a clearance interval greater than zero is appropriate. For such a situation, the average outgoing quality limit (AOQL) expression has been obtained and, when the serial correlation coefficient of the Markov chain is assumed to be known a priori, it is numerically demonstrated that smaller AOQL values are achieved numerically for values of the clearance interval from 1 to 4, by improving the perform-ance ofCSP-L     

Optimal bivariate step-stress accelerated life test for Type-I hybrid censored data

This paper presents a step-stress accelerated life test for two stress variables to obtain optimal hold times under a Type-I hybrid censoring scheme. An exponentially distributed life and a cumulative exposure model are assumed. The maximum-likelihood estimates are given, from which the asymptotic variance and the Fisher information matrix are obtained. The optimal test plan is determined for each combination of stress levels by minimizing the asymptotic variance of reliability estimate at a typical operating condition. Finally, simulation results are discussed to illustrate the proposed criteria. Simulation results show that the proposed optimum plan is robust, and the initial estimates have a small effect on optimal values.     

Comments on a simple test for new better than used in expectation1 by borges,proschan and rodrigues

Procedures and tables are givenfor construction and selection of continuous sampling plans of the type CSP-2 for a given pair of conditions.     

Exact Bayesian variable sampling plans for the exponential distribution with progressive hybrid censoring

From the exact distribution of the maximum likelihood estimator of the average lifetime based on progressive hybrid exponential censored sample, we derive an explicit expression for the Bayes risk of a sampling plan when a quadratic loss function is used. The simulated annealing algorithm is then used to determine the optimal sampling plan. Some optimal Bayes solutions under progressive hybrid and ordinary hybrid censoring schemes are presented to illustrate the effectiveness of the proposed method.     

Stratified Double Sampling with Continuous Outcomes: Design and Analysis

We provide a method for estimating the sample mean of a continuous outcome in a stratified population using a double sampling scheme. The stratified sample mean is a weighted average of stratum specific means. It is assumed that the fallible and true outcome data are related by a simple linear regression model in each stratum. The optimal stratified double sampling plan, i.e. , the double sampling plan that minimizes the cost of sampling for fixed variances, or alternatively, minimizes the variance for fixed costs, is found and compared to a standard sampling plan. The design parameters are the total sample size and the number of doubly sampled units in each stratum. We show that the optimal double sampling plan is a function of the between-strata and within-strata cost and variance ratios. The efficiency gains, relative to standard sampling plans, under broad set of conditions, are considerable.     

Designing a variable sampling plan based on Taguchi's loss function

This paper discusses the problem of designing a new variable sampling plan. Suppose that the lot quality characteristic obeys an exponential distribution. Adopting Taguchi's loss function, the objective is to design a plan under which the producer's risk of rejecting a lot that has a specified average loss per item is no greater than alpha, and the consumer's risk of accepting a lot that has a specified average loss per item is no greater than beta. The method of designing this plan is an extension of the method used by Derman and Ross.     

Time-truncated attribute sampling plans using EWMA for Weibull and Burr type X distributions

Acceptance sampling, widely used in various production industries, is a very vital tool of quality control. In this paper, a new attribute acceptance-sampling plan is developed based on the exponentially weighted moving average statistic under a time-truncated life test when the product lifetime follows the Weibull distribution or the Burr type X distribution. The performance measures such as the probability of acceptance and the average sample number are derived. Tables are constructed for the selection of optimal parameters of the proposed sampling plan so as to minimize the average sample number satisfying the producer's and the consumer's risks. Illustrative example is also given for the application of the proposed plan. It is also shown that the proposed plan requires a smaller sample size compared to the single sampling plan.     

Robust integer-valued designs for linear random intercept models

This article considers the robust design problem for linear random intercept models with both departures from fixed effects and correlated errors on a finite design space. Two strategies are proposed. One is a worst-case method minimizing the maximum value of the MSE of estimates for the fixed effects over the departure. The other is an average-case method minimizing the average value of the MSE with respect to some priors for the class of departure functions and correlation structures of random errors. Two examples are given to show robust designs for two polynomial models.