Option pricing under model and parameter uncertainty using predictive densities

The theoretical price of a financial option is given by the expectation of its discounted expiry time payoff. The computation of this expectation depends on the density of the value of the underlying instrument at expiry time. This density depends on both the parametric model assumed for the behaviour of the underlying, and the values of parameters within the model, such as volatility. However neither the model, nor the parameter values are known. Common practice when pricing options is to assume a specific model, such as geometric Brownian Motion, and to use point estimates of the model parameters, thereby precisely defining a density function.We explicitly acknowledge the uncertainty of model and parameters by constructing the predictive density of the underlying as an average of model predictive densities, weighted by each model's posterior probability. A model's predictive density is constructed by integrating its transition density function by the posterior distribution of its parameters. This is an extension to Bayesian model averaging. Sampling importance-resampling and Monte Carlo algorithms implement the computation. The advantage of this method is that rather than falsely assuming the model and parameter values are known, inherent ignorance is acknowledged and dealt with in a mathematically logical manner, which utilises all information from past and current observations to generate and update option prices. Moreover point estimates for parameters are unnecessary. We use this method to price a European Call option on a share index.     

Identification of parametric Rasch-type models

In modern Item Response Theory, the Rasch model is viewed as a Generalized Linear Mixed Model, where the item parameters correspond to the fixed-effects, whereas the person specific parameters are the random-effects. The statistical model, bearing on the observable variables only, is obtained after integrating out the random-effects. Although it is widely accepted that the parameters of this model are identified, it is hard to find a correct justification. Furthermore, the meaning of the parameters of the Rasch model – as well as of its extensions – is typically based on the fixed-effects specification of the model, that is, when the person specific parameters are also treated as fixed-effects. The contribution of this paper is to provide an explicit proof of the identification of the random-effects Rasch model. The proof is valid for a large class of Rasch-type models. It is also shown that such a proof can be applied to analyze the identification of Explanatory Rasch Models. Finally, the meaning of the parameters of interest with respect to the different data generating process is discussed.     

Design issues for population growth models

We briefly review and discuss design issues for population growth and decline models. We then use a flexible growth and decline model as an illustrative example and apply optimal design theory to find optimal sampling times for estimating model parameters, specific parameters and interesting functions of the model parameters for the model with two real applications. Robustness properties of the optimal designs are investigated when nominal values or the model is mis-specified, and also under a different optimality criterion. To facilitate use of optimal design ideas in practice, we also introduce a website for generating a variety of optimal designs for popular models from different disciplines.     

Application of Dirichlet mixture of normals in growth curve models

In this paper, we present growth curve models with an auxiliary variable which contains an uncertain data distribution based on mixtures of standard components, such as normal distributions. The multimodality of the auxiliary random variable motivates and necessitates the use of mixtures of normal distributions in our model. We have observed that Dirichlet process priors, composed of discrete and continuous components, are appropriate in addressing the two problems of determining the number of components and estimating the parameters simultaneously and are especially useful in the aforementioned multimodal scenario. A model for the application of Dirichlet mixture of normals (DMN) in growth curve models under Bayesian formulation is presented and algorithms for computing the number of components, as well as estimating the parameters are also rendered. The simulation results show that our model gives improved goodness of fit statistics over models without DMN and the estimates for the number of components and for parameters are reasonably accurate.     

A recursive approach to parameter estimation in regression and time series models

In this paper we discuss the recursive (or on line) estimation in (i) regression and (ii) autoregressive integrated moving average (ARIMA) time series models. The adopted approach uses Kalman filtering techniques to calculate estimates recursively. This approach is used for the estimation of constant as well as time varying parameters. In the first section of the paper we consider the linear regression model. We discuss recursive estimation both for constant and time varying parameters. For constant parameters, Kalman filtering specializes to recursive least squares. In general, we allow the parameters to vary according to an autoregressive integrated moving average process and update the parameter estimates recursively. Since the stochastic model for the parameter changes will "be rarely known, simplifying assumptions have to be made. In particular we assume a random walk model for the time varying parameters and show how to determine whether the parameters are changing over time. This is illustrated with an example.     

A proportional hazards regression model with change-points in the baseline function

In this article, we consider a new regression model for counting processes under a proportional hazards assumption. This model is motivated by the need of understanding the evolution of the booking process of a railway company. The main novelty of the approach consists in assuming that the baseline hazard function is piecewise constant, with unknown times of jump (these times of jump are estimated from the data as model parameters). Hence, the parameters of the model can be separated into two different types: parameters that measure the influence of the covariates, and parameters from a multiple change-point model for the baseline. Cox??s semiparametric regression can be seen as a limit case of our model. We develop an iterative procedure to estimate the different parameters, and a test procedure that allows to perform change-point detection in the baseline. Our technique is supported by simulation studies and a real data analysis, which show that our model can be a reasonable alternative to Cox??s regression model, particularly in the presence of tied event times.     

SVJD-LIBOR随机动态模型的市场校准估计与实证模拟

针对跳跃扩散LIBOR市场模型（JD-LIBOR）与随机波动率LIBOR市场模型（SVJD-LMM）各自应用局限,首先将正态跳跃扩散与Heston随机波动率同时引入标准化LIBOR市场模型中,建立一类新型双重驱动非标准化LIBOR市场模型（SVJD-LMM）。其次,运用Cap、Swaption等利率衍生产品市场数据和Black逆推校准方法,对模型的局部波动参数与瞬间相关性参数进行有效市场校准;并运用自适应马尔科夫链蒙特卡罗模拟方法（此后简称A-MCMC）对模型的随机波动率、跳跃扩散等其他主要参数进行有效理论估计与实证模拟。最后,针对六月期美元Libor远期利率实际数据,对上述三类市场模型进行了模拟比较分析。研究结论认为,若在单因子Libor利率市场模型基础上引入跳跃扩散过程,并且联立波动率的随机微分方程,则可极大地提高利率模型的解释力;加入随机波动率和跳跃扩散过程的模拟计算结果与实际利率的误差更小,从而更接近现实情况。     

Deletion diagnostics for marginal mean and correlation model parameters in estimating equations

Regression diagnostics are introduced for parameters in marginal association models for clustered binary outcomes in an implementation of generalized estimating equations. Estimating equations for intracluster correlations facilitate computational formulae for one-step deletion diagnostics in an extension of earlier work on diagnostics for parameters in the marginal mean model. The proposed diagnostics measure the influence of an observation or a cluster of observations on the estimated regression parameters and on the overall fit of the model. The diagnostics are applied to data from four research studies from public health and medicine.     

Calibrated imputation in surveys under a quasi-model-assisted approach

Summary.  We propose to use calibrated imputation to compensate for missing values. This technique consists of finding final imputed values that are as close as possible to preliminary imputed values and are calibrated to satisfy constraints. Preliminary imputed values, potentially justified by an imputation model, are obtained through deterministic single imputation. Using appropriate constraints, the resulting imputed estimator is asymptotically unbiased for estimation of linear population parameters such as domain totals. A quasi-model-assisted approach is considered in the sense that inferences do not depend on the validity of an imputation model and are made with respect to the sampling design and a non-response model. An imputation model may still be used to generate imputed values and thus to improve the efficiency of the imputed estimator. This approach has the characteristic of handling naturally the situation where more than one imputation method is used owing to missing values in the variables that are used to obtain imputed values. We use the Taylor linearization technique to obtain a variance estimator under a general non-response model. For the logistic non-response model, we show that ignoring the effect of estimating the non-response model parameters leads to overestimating the variance of the imputed estimator. In practice, the overestimation is expected to be moderate or even negligible, as shown in a simulation study.     

Estimation for the parameters of the generalized half-normal distribution

As an applicable and flexible lifetime model, the two-parameter generalized half-normal (GHN) distribution has been received wide attention in the field of reliability analysis and lifetime study. In this paper maximum likelihood estimates of the model parameters are discussed and we also proposed corresponding bias-corrected estimates. Unweighted and weighted least squares estimates for the parameters of the GHN distribution are also presented for comparison purpose. Moreover, the likelihood ratio test is provided as complementary. Simulation study and illustrative examples are provided to compare the performance of the proposed methods.     

Optimal designs for the power logistic model

We investigate non-sequential designs for estimating model parameters in a power logistic model when the power is assumed to be approximately known and only the ranges for the other two parameters are available. The sensitivity of these designs to nominal values of all the three parameters are studied and our proposed optimal designs are shown to be reasonably robust under moderate deviation from the assumed model. An application to a toxicity experiment involving adult beetles is discussed, including the benefits of using an optimal design.     

Likelihood estimation for exchangeable multinomial data

In this article, maximum likelihood estimates of an exchangeable multinomial distribution using a parametric form to model the parameters as functions of covariates are derived. The non linearity of the exchangeable multinomial distribution and the parametric model make direct application of Newton Rahpson and Fisher's scoring algorithms computationally infeasible. Instead parameter estimates are obtained as solutions to an iterative weighted least-squares algorithm. A completely monotonic parametric form is proposed for defining the marginal probabilities that results in a valid probability model.     

Inference for longitudinal data from complex sampling surveys: An approach based on quadratic inference functions

We propose a survey weighted quadratic inference function method for the analysis of data collected from longitudinal surveys, as an alternative to the survey weighted generalized estimating equation method. The procedure yields estimators of model parameters, which are shown to be consistent and have a limiting normal distribution. Furthermore, based on the inference function, a pseudolikelihood ratio type statistic for testing a composite hypothesis on model parameters and a statistic for testing the goodness of fit of the assumed model are proposed. We establish their asymptotic distributions as weighted sums of independent chi‐squared random variables and obtain Rao‐Scott corrections to those statistics leading to a chi‐squared distribution, approximately. We examine the performance of the proposed methods in a simulation study.     

Some linear model techniques for analyzing small-circle spherical data

The author investigates least squares as a method for fitting small-circle models to a sample of unit vectors in R³. He highlights a local linear model underlying the estimation of the parameters of a circle. This model is used to construct an estimation algorithm and regression-type inference procedures for the parameters of a circle. It makes it possible to compare the fit of a small circle with that of a spherical ellipse. The limitations of the least-squares approach are emphasized: when the errors are bounded away from 0, the least-squares estimators are not consistent as the sample size goes to infinity. Two examples, concerned with the migration of elephant seals and with the classification of geological folds, are analyzed using the linear model techniques proposed in this work.     

Approximate conditional inference and the linear functional model

Approximate conditional inference is developed for the slope parameter of the linear functional model with two variables. It is shown that the model can be transformed so that the slope parameter becomes an angle and nuisance parameters are radial distances. If the nuisance parameters are known an exact confidence interval based on a location-type conditional distribution is available for the angle. More gen¬erally, confidence distributions are used to average the conditional distribution over the nuisance parameters yielding an approximate conditional confidence interval that reflects the precision indicated by the data. An example is analyzed.     

Weibull accelerated life tests when there are competing causes of failure

Accelerated life testing of a product under more severe than normal conditions is commonly used to reduce test time and costs. Data collected at such accelerated conditions are used to obtain estimates of the parameters of a stress translation function. This function is then used to make inference about the product's life under normal operating conditions. We consider the problem of accelerated life tests when the product of interest is a p component series system. Each of the components is assumed to have an independent Weibull time to failure distribution with different shape parameters and different scale parameters which are increasing functions stress. A general model i s used for the scale parameter includes the standard engineering models as special This model also has an appealing biological interpretation     

Exact inference for a simple step-stress model with competing risks for failure from exponential distribution under Type-II censoring

In reliability analysis, accelerated life-testing allows for gradual increment of stress levels on test units during an experiment. In a special class of accelerated life tests known as step-stress tests, the stress levels increase discretely at pre-fixed time points, and this allows the experimenter to obtain information on the parameters of the lifetime distributions more quickly than under normal operating conditions. Moreover, when a test unit fails, there are often more than one fatal cause for the failure, such as mechanical or electrical. In this article, we consider the simple step-stress model under Type-II censoring when the lifetime distributions of the different risk factors are independently exponentially distributed. Under this setup, we derive the maximum likelihood estimators (MLEs) of the unknown mean parameters of the different causes under the assumption of a cumulative exposure model. The exact distributions of the MLEs of the parameters are then derived through the use of conditional moment generating functions. Using these exact distributions as well as the asymptotic distributions and the parametric bootstrap method, we discuss the construction of confidence intervals for the parameters and assess their performance through Monte Carlo simulations. Finally, we illustrate the methods of inference discussed here with an example.     

A Mixed Model for Double Checking Fallible Auditors

This article discusses the problem of a fallible auditor who assesses the values of sampled records, but may make mistakes. To detect these mistakes, a subsample of the checked elements is checked again, now by an infallible expert.

We propose a model for this kind of double check, which takes into account that records are often correct; however, if they are incorrect, the errors can take on many different values—as is often the case in audit practice. The model therefore involves error probabilities as well as distributional parameters for error sizes.

We derive maximum likelihood estimators for these model parameters and derive from them an estimator for the mean size of the errors in the population. A simulation study shows that the latter outperforms some other—previously introduced—estimators.     

Bayesian inference for dynamic social network data

We consider a continuous-time model for the evolution of social networks. A social network is here conceived as a (di-) graph on a set of vertices, representing actors, and the changes of interest are creation and disappearance over time of (arcs) edges in the graph. Hence we model a collection of random edge indicators that are not, in general, independent. We explicitly model the interdependencies between edge indicators that arise from interaction between social entities. A Markov chain is defined in terms of an embedded chain with holding times and transition probabilities. Data are observed at fixed points in time and hence we are not able to observe the embedded chain directly. Introducing a prior distribution for the parameters we may implement an MCMC algorithm for exploring the posterior distribution of the parameters by simulating the evolution of the embedded process between observations.     

Semiparametric Analysis of Truncated Data

Randomly truncated data are frequently encountered in many studies where truncation arises as a result of the sampling design. In the literature, nonparametric and semiparametric methods have been proposed to estimate parameters in one-sample models. This paper considers a semiparametric model and develops an efficient method for the estimation of unknown parameters. The model assumes that K populations have a common probability distribution but the populations are observed subject to different truncation mechanisms. Semiparametric likelihood estimation is studied and the corresponding inferences are derived for both parametric and nonparametric components in the model. The method can also be applied to two-sample problems to test the difference of lifetime distributions. Simulation results and a real data analysis are presented to illustrate the methods.