Sliced inverse moment regression using weighted chi-squared tests for dimension reduction

We propose a new method for dimension reduction in regression using the first two inverse moments. We develop corresponding weighted chi-squared tests for the dimension of the regression. The proposed method considers linear combinations of sliced inverse regression (SIR) and the method using a new candidate matrix which is designed to recover the entire inverse second moment subspace. The optimal combination may be selected based on the p-values derived from the dimension tests. Theoretically, the proposed method, as well as sliced average variance estimate (SAVE), is more capable of recovering the complete central dimension reduction subspace than SIR and principle Hessian directions (pHd). Therefore it can substitute for SIR, pHd, SAVE, or any linear combination of them at a theoretical level. Simulation study indicates that the proposed method may have consistently greater power than SIR, pHd, and SAVE.     

Sparse Sufficient Dimension Reduction for Markov Blanket Discovery

In this article, we propose to use sparse sufficient dimension reduction as a novel method for Markov blanket discovery of a target variable, where we do not take any distributional assumption on the variables. By assuming sparsity on the basis of the central subspace, we developed a penalized loss function estimate on the high-dimensional covariance matrix. A coordinate descent algorithm based on an inverse regression is used to get the sparse basis of the central subspace. Finite sample behavior of the proposed method is explored by simulation study and real data examples.     

Dimension Reduction in Regressions through Weighted Variance Estimation

Because sliced inverse regression (SIR) using the conditional mean of the inverse regression fails to recover the central subspace when the inverse regression mean degenerates, sliced average variance estimation (SAVE) using the conditional variance was proposed in the sufficient dimension reduction literature. However, the efficacy of SAVE depends heavily upon the number of slices. In the present article, we introduce a class of weighted variance estimation (WVE), which, similar to SAVE and simple contour regression (SCR), uses the conditional variance of the inverse regression to recover the central subspace. The strong consistency and the asymptotic normality of the kernel estimation of WVE are established under mild regularity conditions. Finite sample studies are carried out for comparison with existing methods and an application to a real data is presented for illustration.     

A mixture model for dimension reduction

The existence of a dimension reduction (DR) subspace is a common assumption in regression analysis when dealing with high-dimensional predictors. The estimation of such a DR subspace has received considerable attention in the past few years, the most popular method being undoubtedly the sliced inverse regression. In this paper, we propose a new estimation procedure of the DR subspace by assuming that the joint distribution of the predictor and the response variables is a finite mixture of distributions. The new method is compared through a simulation study to some classical methods.     

NON-PARAMETRIC ESTIMATION OF DIRECTION IN SINGLE-INDEX MODELS WITH CATEGORICAL PREDICTORS

This paper proposes a general dimension‐reduction method targeting the partial central subspace recently introduced by Chiaromonte, Cook & Li. The dependence need not be confined to particular conditional moments, nor are restrictions placed on the predictors that are necessary for methods like partial sliced inverse regression. The paper focuses on a partially linear single‐index model. However, the underlying idea is applicable more generally. Illustrative examples are presented.     

Estimating the structural dimension of regressions via parametric inverse regression

A new estimation method for the dimension of a regression at the outset of an analysis is proposed. A linear subspace spanned by projections of the regressor vector X , which contains part or all of the modelling information for the regression of a vector Y on X , and its dimension are estimated via the means of parametric inverse regression. Smooth parametric curves are fitted to the p inverse regressions via a multivariate linear model. No restrictions are placed on the distribution of the regressors. The estimate of the dimension of the regression is based on optimal estimation procedures. A simulation study shows the method to be more powerful than sliced inverse regression in some situations.     

Dimension reduction for the conditional kth moment in regression

The idea of dimension reduction without loss of information can be quite helpful for guiding the construction of summary plots in regression without requiring a prespecified model. Central subspaces are designed to capture all the information for the regression and to provide a population structure for dimension reduction. Here, we introduce the central k th-moment subspace to capture information from the mean, variance and so on up to the k th conditional moment of the regression. New methods are studied for estimating these subspaces. Connections with sliced inverse regression are established, and examples illustrating the theory are presented.     

Dimension reduction transfer function model

The dimension reduction in regression is an efficient method of overcoming the curse of dimensionality in non-parametric regression. Motivated by recent developments for dimension reduction in time series, an empirical extension of central mean subspace in time series to a single-input transfer function model is performed in this paper. Here, we use central mean subspace as a tool of dimension reduction for bivariate time series in the case when the dimension and lag are known and estimate the central mean subspace through the Nadaraya–Watson kernel smoother. Furthermore, we develop a data-dependent approach based on a modified Schwarz Bayesian criterion to estimate the unknown dimension and lag. Finally, we show that the approach in bivariate time series works well using an expository demonstration, two simulations, and a real data analysis such as El Niño and fish Population.     

Sufficient dimension reduction via distance covariance with multivariate responses

In this article, we propose a new method for sufficient dimension reduction when both response and predictor are vectors. The new method, using distance covariance, keeps the model-free advantage, and can fully recover the central subspace even when many predictors are discrete. We then extend this method to the dual central subspace, including a special case of canonical correlation analysis. We illustrated estimators through extensive simulations and real datasets, and compared to some existing methods, showing that our estimators are competitive and robust.     

Extending the Scope of Inverse Regression Methods in Sufficient Dimension Reduction

In the area of sufficient dimension reduction, two structural conditions are often assumed: the linearity condition that is close to assuming ellipticity of underlying distribution of predictors, and the constant variance condition that nears multivariate normality assumption of predictors. Imposing these conditions are considered as necessary trade-off for overcoming the “curse of dimensionality”. However, it is very hard to check whether these conditions hold or not. When these conditions are violated, some methods such as marginal transformation and re-weighting are suggested so that data fulfill them approximately. In this article, we assume an independence condition between the projected predictors and their orthogonal complements which can ensure the commonly used inverse regression methods to identify the central subspace of interest. The independence condition can be checked by the gridded chi-square test. Thus, we extend the scope of many inverse regression methods and broaden their applicability in the literature. Simulation studies and an application to the car price data are presented for illustration.     

A Shrinkage Estimation of Central Subspace in Sufficient Dimension Reduction

Sliced regression is an effective dimension reduction method by replacing the original high-dimensional predictors with its appropriate low-dimensional projection. It is free from any probabilistic assumption and can exhaustively estimate the central subspace. In this article, we propose to incorporate shrinkage estimation into sliced regression so that variable selection can be achieved simultaneously with dimension reduction. The new method can improve the estimation accuracy and achieve better interpretability for the reduced variables. The efficacy of proposed method is shown through both simulation and real data analysis.     

Sufficient dimension reduction and prediction through cumulative slicing PFC

In this article, a new method named cumulative slicing principle fitted component (CUPFC) model is proposed to conduct sufficient dimension reduction and prediction in regression. Based on the classical PFC methods, the CUPFC avoids selecting some parameters such as the specific basis function form or the number of slices in slicing estimation. We develop the estimator of the central subspace in the CUPFC method under three error-term structures and establish its consistency. The simulations investigate the effectiveness of the new method in prediction and reduction estimation with other competitors. The results indicate that the new proposed method generally outperforms the existing PFC methods no matter how the predictors are truly related to the response. The application to real data also verifies the validity of the proposed method.     

An Improved Estimation in Regression Parameter Matrix in Multivariate Regression Model

We consider shrinkage and preliminary test estimation strategies for the matrix of regression parameters in multivariate multiple regression model in the presence of a natural linear constraint. We suggest a shrinkage and preliminary test estimation strategies for the parameter matrix. The goal of this article is to critically examine the relative performances of these estimators in the direction of the subspace and candidate subspace restricted type estimators. Our analytical and numerical results show that the proposed shrinkage and preliminary test estimators perform better than the benchmark estimator under candidate subspace and beyond. The methods are also applied on a real data set for illustrative purposes.     

Sliced inverse regression for multivariate response regression

We consider a regression analysis of multivariate response on a vector of predictors. In this article, we develop a sliced inverse regression-based method for reducing the dimension of predictors without requiring a prespecified parametric model. Our proposed method preserves as much regression information as possible. We derive the asymptotic weighted chi-squared test for dimension. Simulation results are reported and comparisons are made with three methods—most predictable variates, k-means inverse regression and canonical correlation approach.     

Chi-squared tests in kth-moment sufficient dimension reduction

We present a novel approach to sufficient dimension reduction for the conditional kth moments in regression. The approach provides a computationally feasible test for the dimension of the central kth-moment subspace. In addition, we can test predictor effects without assuming any models. All test statistics proposed in the novel approach have asymptotic chi-squared distributions.     

Multiple-index approach to multiple autoregressive time series model

Time series which have more than one time dependent variable require building an appropriate model in which the variables not only have relationships with each other, but also depend on previous values in time. Based on developments for a sufficient dimension reduction, we investigate a new class of multiple time series models without parametric assumptions. First, for the dependent and independent time series, we simply use a univariate time series central subspace to estimate the autoregressive lags of the series. Secondly, we extract the successive directions to estimate the time series central subspace for regressors which include past lags of dependent and independent series in a mutual information multiple-index time series. Lastly, we estimate a multiple time series model for the reduced directions. In this article, we propose a unified estimation method of minimal dimension using an Akaike information criterion, for situations in which the dimension for multiple regressors is unknown. We present an analysis using real data from the housing price index showing that our approach is an alternative for multiple time series modeling. In addition, we check the accuracy for the multiple time series central subspace method using three simulated data sets.     

Sufficient dimension reduction through informative predictor subspace

The purpose of this paper is to define the central informative predictor subspace to contain the central subspace and to develop methods for estimating the former subspace. Potential advantages of the proposed methods are no requirements of linearity, constant variance and coverage conditions in methodological developments. Therefore, the central informative predictor subspace gives us the benefit of restoring the central subspace exhaustively despite failing the conditions. Numerical studies confirm the theories, and real data analyses are presented.     

Nonparametric approach to intervention time series modeling

Time series are often affected by interventions such as strikes, earthquakes, or policy changes. In the current paper, we build a practical nonparametric intervention model using the central mean subspace in time series. We estimate the central mean subspace for time series taking into account known interventions by using the Nadaraya–Watson kernel estimator. We use the modified Bayesian information criterion to estimate the unknown lag and dimension. Finally, we demonstrate that this nonparametric approach for intervened time series performs well in simulations and in a real data analysis such as the Monthly average of the oxidant.     

On distribution-weighted partial least squares with diverging number of highly correlated predictors

Summary.  Because highly correlated data arise from many scientific fields, we investigate parameter estimation in a semiparametric regression model with diverging number of predictors that are highly correlated. For this, we first develop a distribution-weighted least squares estimator that can recover directions in the central subspace, then use the distribution-weighted least squares estimator as a seed vector and project it onto a Krylov space by partial least squares to avoid computing the inverse of the covariance of predictors. Thus, distrbution-weighted partial least squares can handle the cases with high dimensional and highly correlated predictors. Furthermore, we also suggest an iterative algorithm for obtaining a better initial value before implementing partial least squares. For theoretical investigation, we obtain strong consistency and asymptotic normality when the dimension p of predictors is of convergence rate O { n ^1/2/ log ( n )} and o ( n ^1/3) respectively where n is the sample size. When there are no other constraints on the covariance of predictors, the rates n ^1/2 and n ^1/3 are optimal. We also propose a Bayesian information criterion type of criterion to estimate the dimension of the Krylov space in the partial least squares procedure. Illustrative examples with a real data set and comprehensive simulations demonstrate that the method is robust to non-ellipticity and works well even in 'small n –large p ' problems.     

Extending Save and PHD

SAVE and PHD are effective methods in dimension reduction problems. Both methods are based on two assumptions: linearity condition and constant covariance condition. But in the situation where constant covariance condition fails, even if linearity condition holds, SAVE and PHD often pick the directions which are out side of the central subspace (CS) or central mean subspace (CMS). In this article, we generalize the SAVE and PHD under weaker conditions. This generalization make it possible to get the correct estimates of central subspace (CS) and central mean subspace (CMS).