Ergonomic evaluation of the preparation of cuttings and minicuttings for eucalyptus seedling production, with the use of scissors

This study was conducted in a nursery for eucalyptus seedling production in a forest Company, located in the southern state of Bahia, Brazil. It aimed to evaluate the ergonomic conditions of the preparation of cuttings and mini-cuttings with scissors for Eucalyptus seedling production to increase well-being, satisfaction and safety and minimizing the occurrence of occupational diseases, also improving the process efficiency and final product quality. Environmental conditions, levels of noise, postures, RSI risk and physical workload were assessed. The environmental conditions complied with the recommended norms, except at certain times of day, when workers should make compensation breaks. The workers that collect minicuttings presented postures classified as normal by OWAS. On the other hand, the posture of workers dealing with cutting preparation requires corrections in a short run. The workers were subjected to moderate RSI risk due to the high degree of repeatability found. The physical workload was classified as mild, with no need for ergonomic interventions.     

Multi dimensional system for evaluating preventive program for upper extremity disorders among computer operators

Typing is associated with musculoskeletal complaints (MSCs), caused by multiple risk factors. Although a wide variety of ergonomic intervention programs were conducted to reduce risk factors and MSC's, only few of them were found evidence based. This study aimed to test the efficacy of a workplace intervention in reducing MSC's among computer workers. 66 computer workers were assigned randomly to one of three intervention programs: ergonomic intervention including biofeedback, intervention without biofeedback and control group without intervention. The efficacy was tested by advanced assessment including; pain location and severity, posture at work, upper extremity 3D kinematics, muscle activity and psychosocial status. Working hypothesis; significant score differences will be found between the study groups which underwent ergonomic intervention and the control group on the following measures: pain complaints, upper extremity kinematics, muscle activity and psychosocial status. Significant differences were found between pre and post intervention and between research groups and the control group in pain, posture and motion. The ergonomic intervention with biofeedback had no unique contribution in comparison to other interventions. In conclusion; the proposed intervention program was found efficient for reducing pain among computer workers.     

Ergonomic intervention in aonla pricking operation during preserve preparation in food processing industries

Aonla is an important Indian fruit crop with great potential for processing into various quality products. Aonla preserve making is an important economic activity in our country. The pricking methods are age old, hence a hand operated aonla pricking machine was introduced in preserve making industries to speed up the pricking task. OWAS and RULA two of the most commonly used ergonomic assessment tools were evaluated for their efficacy in the assessment pricking along with Rating of perceived exertion scale. Analysis of working posture using RULA revealed that the pricking task with existing methods i.e. fork and hand tool requires immediate investigation and changes in working posture while with machine pricking investigations and changes are required soon. The results of OWAS indicated that the posture maintained while pricking with existing methods need to be changed in future planning while with machine was acceptable. The subjective assessment revealed that machine pricking was less exerting activity as compared to the existing methods. The preserve prepared from machine pricked fruit was most acceptable among consumers. Hence, in the form of machine ergonomic intervention was brought about in preservation industries which have proved beneficial for workers in terms of their safety and productivity.     

Ergonomic recommendations and their impact on child care workers' health

The purpose of this study was to determine the impact ergonomics has had on the occurrence of musculoskeletal symptoms and injuries among child care workers in Wisconsin using a Classroom and Work Methods Survey developed for this investigation. Information on perceived need for and knowledge of ergonomic interventions, the extent to which ergonomic interventions had been introduced to child care settings, and barriers to implementation of ergonomic recommendations was gathered. Two hundred and fifty-eight respondents completed the survey. The majority of respondents was aware of most (18 of 20) of the recommended ergonomic interventions for child care centers and did not perceive a need to make ergonomic changes. Although the majority of respondents had implemented 15 out of the 20 recommendations, they were currently experiencing musculoskeletal pain while performing their jobs. The results of this study highlight the need for further analysis of specific child care tasks and identification of more effective methods to reduce the risk for musculoskeletal pain and injuries.     

Ergonomic risk assessment with DesignCheck to evaluate assembly work in different phases of the vehicle development process

Occupational hazards exist, if the design of the work situation is not in accordance with ergonomic design principles. At assembly lines ergonomics is applied to the design of work equipment and tasks and to work organisation. The ignoring of ergonomic principles in planning and design of assembly work leads to unfavourable working posture, action force and material handling. Disorders of the musculoskeletal system are of a common occurrence throughout Europe. Musculoskeletal disorders are a challenge against the background of disabled workers. The changes in a worker's capability have to be regarded in the conception of redesigned and new assembly lines. In this way ergonomics becomes progressively more important in planning and design of vehicles: The objective of ergonomic design in different stages of the vehicles development process is to achieve an optimal adaptation of the assembly work to workers. Hence the ergonomic screening tool "Design Check" (DC) was developed to identify ergonomic deficits in workplace layouts. The screening-tool is based on the current ergonomic state of the art in the design of physical work and relevant EU legal requirements. It was tested within a federal German research project at selected work stations at the assembly lines at Dr.-Ing. h.c. F. Porsche AG / Stuttgart. Meanwhile the application of the screening-tool DC is transferred in other parts of the Porsche AG, Stuttgart. It is also realized as an ergonomic standard method to perform assembly work in different phases of the vehicle development process.     

Analysis of the compensatory postures adopted by day caregivers through OWAS-Ovako Working Posture Analysing System

The Ergonomic Work Analysis reports that there are many activities performed by the professional caregivers and that they are exposed to physical and psychological overload. This situation favors the emergence of pain which influences the quality of life in the work place. In this way, the objective of this study was to verify the main postural constraints adopted by caregivers in public day cares. Visits were conducted in 28 day cares aiming at performing an interview to 126 caregivers who have been working for more than 4 years. From the questionnaire it was found that 80% of the participants refer some sort of pain, being 42% in the trunk, 33% in the shoulder and 25% in the lower limbs. The data from OWAS method showed that from the total of 30 postures performed during the work One could see that the main postures adopted by the caregivers were: flexion, lateral inclination and rotation of the trunk and most of the time they are standing. These movements, when bad performed, can lead to injuries in the lower limbs, upper limbs and trunk. It's necessary more attention to these workers.Thought preventive ergonomic actions to reduce pain symptoms and promote a work in health and safety.     

Evaluation of an upper extremity student-role functioning scale using item response theory

Millions of workers suffer from upper extremity (musculoskeletal) disorders. Many of these workers are predisposed to upper extremity musculoskeletal disorders because of early exposure to ergonomic risks as students. Computer usage for four or more hours remains the greatest risk for upper extremity musculoskeletal disorders for workers and students alike. Developing preventative methods to reduce student exposure, and thus protect future workers from upper extremity musculoskeletal disorders later in life, requires an appropriate measure for upper extremity musculoskeletal disorder prevalence and related limitations for student functioning. Item response theory analysis was used to evaluate and further develop a upper extremity functioning scale for the student role.     

A controlled case study of supervisor training to optimize response to injury in the food processing industry

The role of supervisors to aid injured workers, access health care, and provide reasonable accommodation may prevent prolonged disability among workers reporting musculoskeletal pain. Although supervisor training has been a common element of broad-based ergonomic interventions to prevent injuries, the impact of supervisor training alone to improve injury response has not been studied. In a controlled design, 11 supervisors in an intervention group and 12 supervisors in a delayed intervention control group from the same plant were provided a 4-hour training workshop. The workshop emphasized communication skills and ergonomic accommodation for workers reporting injuries or health concerns. Workers' compensation claims data in the 7 months before and after the workshop showed a 47% reduction in new claims and an 18% reduction in active lost-time claims versus 27% and 7%, respectively, in the control group. Improving the response of frontline supervisors to employees' work-related health and safety concerns may produce sustainable reductions in injury claims and disability costs.     

Perspectives on workplace disability management: a review of the literature

Work-related musculoskeletal injuries represent a major source of work disability. While many employers recognize the importance of workplace disability management approaches and are assuming greater responsibility for preventing and minimizing work-related disability, questions about the effectiveness of these interventions exist. The purposes of this article are to: 1) describe the essential components of workplace disability management programs related to musculoskeletal injuries; 2) review the literature on disability management practices based on research evidence by focussing on workplace-based interventions and the role of the workplace; and 3) provide recommendations for disability management in the prevention and reduction of disability, and the rehabilitation of injured workers with musculoskeletal work injuries. The literature suggests that employer participation, a supportive work climate and cooperation between labour and management are crucial factors in facilitating return to work. Given the complexity of the disability management process and the numbers of individuals involved, it is essential that all workplace parties work together to achieve the goal of safe and early return to work.     

Effect of ergonomic and workstyle risk factors on work related musculoskeletal disorders among IT professionals in India

'Workstyle' can be described as a mechanism by which ergonomic and psychosocial risk factors interact to affect the development, exacerbation and/or maintenance of upper limb pain and functional limitations. Workstyle is associated with the increase in the work demand. In today's life use of computer in the workplace is very common and it causes to increase the work demand among the workers who are working with computer. As work demand increase, according to the characteristic of workstyle, risk of the development of musculoskeletal disorders also increased. This study aimed at to findout the association between ergonomics risk factors, workstyle and WRMSD. Two hundred IT professionals participated in this study. Result revealed that most prevalenet body regions were lower back (20%), Upper back (16%) and shoulder (14%). Study result says that there is a positive association between workstyle score with musculoskeletal pain (r=0.85). Also it revealed that posture and regional pain is associated (r=0.62), per day use of computer and musculoskeletal pain (r=0.46), micro breaks and pain (r=0.87) and productivity and the pain (r=0.95). This study further validates these observations and extends support for the assessment of working postures and workstyle behaviors during the design of WMSD treatment.     

The reality of the women who make our lives easier: experience in a company that assemblies electric motors in Venezuela

Objective: intervene a workline throughout ergonomic approach to diminish incidence of Carpal Tunnel Syndrome (CTS). Methods and Materials: an ergonomic intervention study was developed in workstations with highest index of musculoskeletal disorder (MED) associated to cumulative trauma. The Deparis method, Reba and Ocra check list methods were used, also morbility reviewes. National and international ethics criteria were carried out. Results: workers identified 3 fundamental issues using the Deparis method: repetitive activities, postures adopted and uncomfortable furniture. The analysis of the workstation with Reba and Ocra methods before the changes, evidenciated that 56% of postures adopted were high risk postures, the 44% remaining were medium and low-risk. Following the active pause program (APP), furniture changes and work rhythm decrease, was noted that the risk of suffering MED decreased. The morbility review, drop in consults of musculoskeletal system (MES) related to CTS observed. The APP was well accepted by women, but not initially men. Discussion: the research show that when the work rhythm decreases, the symptom of MES related to CTS have a remarkable decrease, also that changes in the furniture, generate great ergonomic differences and changes in the work environment are not possible if workers don't empower the tools to make-it.     

Using process evaluation to determine effectiveness of participatory ergonomics training interventions in construction

The construction industry continues to experience high rates of musculoskeletal injuries despite the widespread promotion of ergonomic solutions. Participatory ergonomics (PE) has been suggested as one approach to engage workers and employers for reducing physical exposures from work tasks but a systematic review of participatory ergonomics programs showed inconclusive results.. A process evaluation is used to monitor and document the implementation of a program and can aid in understanding the relationship between the program elements and the program outcomes. The purpose of this project is to describe a proposed process evaluation for use in a participatory ergonomic training program in construction workers and to evaluate its utility in a demonstration project among floor layers.     

Study of musculoskeletal risks of the office-based surgeries

Due to the cost and time benefits associated with patients and physicians, outpatient surgeries continue to become more and more popular over time. With the increase in the number of office-based surgical procedures, the prevalence of work-related musculoskeletal disorders (WMSDs) associated with office-based surgeries has been reported. The purpose of this pilot study is to ergonomically evaluate the risk of work-related musculoskeletal disorders of physicians/surgeons performing office-based surgery (OBS). Ergonomic assessment tools included Questionnaire, the BodyMap and the Rapid Upper Limb Assessment for measuring potential ergonomic concerns. The findings have shown that the ergonomic issues of greatest concerns were the discomforts in the neck, shoulders, arms/wrists, and back. Some additional comments were provided by the participants regarding the duration of discomfort or clarification on the frequency of their body discomfort. This study suggests that there is a considerable risk of musculoskeletal injuries of physicians/surgeons performing the OBS tasks. By properly using the ergonomic assessment techniques, valuable information on ergonomic OBS workplace design and selection could assist in the early interventions of WMSD prevention.     

Biomechanical analysis of loading/unloading a ladder on a truck

Loading/unloading a ladder on vehicles are frequent tasks and involve overhead handling that may expose workers to risk factors of shoulder musculoskeletal disorders. The objective of the present study was to evaluate posture, forces required and perceived exertion when loading and unloading the ladder on a utility truck. Thirteen male overhead line workers from an electric utility in Brazil participated in this study. Shoulder elevation angle was measured using inclinometers. The required force to load/unload the ladder was measured by dynamometer. Subjective assessment of the perceived exertion was recorded to compare the exertion reported during the test conditions to the field conditions. The task of loading/unloading the ladder presented risks of shoulder musculoskeletal disorders (MSDs) to workers because it requires high levels of force (approximately 60% of the maximal force) combined with overhead posture of the shoulders (more than 100° from the neutral posture). Age and height presented to interfere in biomechanical risks presented in load/unload task. There was no significant difference between the subjective exertion during the test conditions and handling the ladder in the field. Ergonomic intervention is recommended to reduce these risks for shoulder MSDs.     

Postural analysis of workers in a typical meat processing company in Brazil

Companies have increasingly sought strategies that will ensure a more competitive position in the marketplace. Among these strategies adopted by companies include the health and welfare of the worker, factors currently valued by consumers, especially those of most demanding market. Thus, the postural analysis is of great importance and interest because it is the study of positioning related to body parts like head, torso and limbs, capable of producing loads that may be excessive or insufficient causing disturbances in the muscle skeletal system worker. The aim of this study was to perform a postural analysis of the main sectors of workers (slaughter, cutting room, special cuts, packaging and dispatch) of a typical refrigerator pig industry in Brazil during the execution of their daily activities as well as developing proposals to minimize and/or eliminate the diseases and accidents. The study followed the safety norms of Brazilian Ministry of Labor and Employment. The posture analysis used the OWAS (Ovako Working Posture Analyzing System) methodology. The postures assumed by workers in the sector of packaging were as the most in need of emergency and quick action.     

Ergonomic evaluation of conventional and improved methods of aonla pricking with women workers

Conventional and improved methods of aonla pricking were evaluated ergonomically on an experiment conducted for 20 minute with women workers. The working heart rate, energy expenditure rate, total cardiac cost of work and physiological cost of work with conventional tools varied from 93-102 beats.min-1, 6-7.5 kJ.min-1, 285-470 beats, 14 -23 beats.min-1 while with machine varied from 96-105 beats.min-1, 6.5-8 kJ.min-1 , 336-540 beats, 16-27 beats.min-1 respectively. OWAS score for conventional method was 2 indicating corrective measures in near future while with machine was 1 indicating no corrective measures. Result of Nordic Musculoskeletal Questionnaire revealed that subjects complaint of pain in back, neck, right shoulder and right hand due to unnatural body posture and repetitive movement with hand tool. Moreover pricking was carried out in improper lighting conditions (200-300 lux) resulting into finger injuries from sharp edges of hand tool, whereas with machine no such problems were observed. Output with machine increased thrice than hand pricking in a given time. Machine was found useful in terms of saving time, increased productivity, enhanced safety and comfort as involved improved posture, was easy to handle and operate, thus increasing efficiency of the worker leading to better quality of life.     

An office chair to influence the sitting behavior of office workers

Since the introduction of ergonomic guidelines in the design of office chairs, a lot of effort has been put in designing these office chairs accordingly. Because these features all have to be adjusted in different ways (mostly a knob underneath the seat surface), and because every office chair offers different solutions, often users do not use all of the adjustments, and thus do not use the office chair an the optimal ergonomic way. The aim of this paper is to study the influence of feedback on sitting habits of office workers in a field test during 4 weeks. 40 office workers were selected for this test (13 male, 27 female). They were divided in three groups. A control group, a group that received a sitting instruction and a group that received sitting instruction and feedback on their posture every hour that they sit. The results show that there is an effect in average increase in basic posture on both the group that received instruction and the group that received feedback. This effect decreases over time. There was no effect in the control group.     

Preventing work-related musculoskeletal disorders in VDT users: a comprehensive health promotion program

As we enter the 21st century, technology has revolutionized the workplace, as nearly half of the working population in the United States currently uses a computer at work. Although computers continue to effectively improve productivity in the workplace, the adverse effects of prolonged computer use on the musculoskeletal system cannot go unnoticed. The astounding rise in computer use in the last decade has been paralleled by a rise in work-related musculoskeletal disorders due to repetitive typing or key entry. Because national ergonomic standards aimed at reducing these injuries have not yet been enforced, the prevention of this national health problem lies in the hands of health care professionals. The following will outline a comprehensive health promotion program, based on Green and Kreuter's PRECEDE-PROCEED model, to serve as an example of how health professionals across the nation can begin to effectively prevent this astronomical problem.     

Workplace safety assessment and injury prevention in hospital settings

Work-related injuries are becoming increasingly prevalent in hospital settings. These injuries are impacting all professionals providing services in the health care arena including nurses, physicians, and household cleaning employees. In order to reduce the number of worksite injuries, the hospital setting may benefit from ergonomic assessments, as well as safety education and prevention strategies. This paper describes the incidence and type of injuries as well as the related risks encountered by hospital personnel. Employers and employees may benefit from participating in the recommended ergonomic process in order to identify potential at-risk situations and prevent musculoskeletal injuries.     

Biomechanical modelling and evaluation of construction jobs for performance improvement

Occupational risk factors, such as awkward posture, repetition, lack of rest, insufficient illumination and heavy workload related to construction-related MMH activities may cause musculoskeletal disorders and poor performance of the workers, ergonomic design of construction worksystems was a critical need for improving their health and safety wherein a dynamic biomechanical models were required to be empirically developed and tested at a construction site of Tata Steel, the largest steel making company of India in private sector. In this study, a comprehensive framework is proposed for biomechanical evaluation of shovelling and grinding under diverse work environments. The benefit of such an analysis lies in its usefulness in setting guidelines for designing such jobs with minimization of risks of musculoskeletal disorders (MSDs) and enhancing correct methods of carrying out the jobs leading to reduced fatigue and physical stress. Data based on direct observations and videography were collected for the shovellers and grinders over a number of workcycles. Compressive forces and moments for a number of segments and joints are computed with respect to joint flexion and extension. The results indicate that moments and compressive forces at L5/S1 link are significant for shovellers while moments at elbow and wrist are significant for grinders.