Economic design of quick switching sampling system for assuring Weibull distributed mean life

In this paper, we propose the quick switching sampling system for assuring mean life of a product under time truncated life test where the lifetime of the product follows the Weibull distribution and the mean life is considered as the quality of the product. The optimal parameters of the proposed system are determined using two points on the operating characteristic curve approach for various combinations of consumer's risk and ratio of true mean life time and specified life time. Tables are constructed to determine the optimal parameters for specified acceptable quality level and limiting quality level along with the corresponding probabilities of acceptance. The proposed system is compared with other existing sampling plans under Weibull lifetime model. In addition, an economical design of the proposed system is also discussed.     

A new policy for designing acceptance sampling plan based on Bayesian inference in the presence of inspection errors

The purpose of this article is to present a new policy for designing an acceptance sampling plan based on the minimum proportion of the lot that should be inspected in the presence of inspection errors. It is assumed that inspection is not perfect and every defective item cannot be detected with complete certainty. The Bayesian method is used for obtaining the probability distribution function of the number of defective items in the lot. To design this model, two constraints of producer risk and consumer risk are considered during the inspection process by using two specified points on operating characteristic curve. In order to illustrate the application of the proposed model, an example is presented. In addition, a sensitivity analysis is performed to analyze the model performance under different scenarios of process parameters and the results are elaborated. Finally, the efficiency of the proposed model is compared with the sampling method of Spencer and Kevan de Lopez (2017) at the same conditions.     

Bayesian Design of Special Type of Double Sampling Plans for Compliance Testing

Bayesian acceptance sampling plans, which utilize prior information on the process variation, can be employed as an alternative to conventional types of plans for taking decisions on the disposition of submitted lots. A special type of double sampling inspection plans by attributes with small acceptance numbers using Bayesian methodology is presented in this paper emphasizing its significance over small acceptance number single sampling plans. The procedures for designing such sampling plans for specified degree of discrimination which would ensure protection to the producer and consumer are discussed with illustrations under the conditions for the application of gamma-Poisson distribution.     

Attribute-variable Inspection Policy for Lots Using Resampling Based on EWMA

A new mixed sampling plan which is a combination of the attribute single sampling plan and variables resampling scheme based on EWMA statistic is proposed in this paper. The operating characteristic function of the proposed plan is derived and the plan parameters are determined such that the probability of acceptance of good lot is larger than the specified producer's confidence level and the bad lot acceptance probability is smaller than the consumer's confidence level. The efficiency and the advantages of the proposed plan are discussed over the existing attribute sampling plan. The extensive tables are provided for industrial applications. The use of tables is discussed with the help of a real-time industrial example.     

Double and group acceptance sampling plan for truncated life test based on inverse log-logistic distribution

This paper introduces a double and group acceptance sampling plans based on time truncated lifetimes when the lifetime of an item follows the inverse log-logistic (ILL) distribution with known shape parameter. The operating characteristic function and average sample number (ASN) values of the double acceptance sampling inspection plan are provided. The values of the minimum number of groups and operating characteristic function for various quality levels are obtained for a group acceptance sampling inspection plan. A comparative study between single acceptance sampling inspection plan and double acceptance sampling inspection plan is carried out in terms of sample size. One simulated example and four real-life examples are discussed to show the applicability of the proposed double and group acceptance sampling inspection plans for ILL distributed quality parameters.     

SkSP-R sampling plan based on process capability index

In this paper, we present an optimal designing methodology for the skip-lot sampling plan (SkSP) of type SkSP-R based on the most widely used process capability index (PCI) C_pk. The SkSP-R plan is one of the SkSPs that incorporate the provision of the reinspection concept. In order to design the optimal parameters, we consider both symmetric and asymmetric fraction non conforming cases. Tables are also constructed to determine the optimal parameters by formulating an optimization problem. The advantages of the proposed plan over the existing plan are also discussed. Application of the plan is explained with a real-life example.     

Economic design of quick switching sampling system for resubmitted lots

This paper proposes a quick switching sampling system for the inspection of attributes quality characteristics for resubmitted lots. The optimal parameters for both fraction non conforming items and fraction non conformities of the proposed sampling system are determined using an optimization procedure so that producer’s risk and consumer’s risk are simultaneously satisfied. Tables are also constructed for the selection of parameters for specified AQL and LQL. The advantage of the proposed plan over the existing plan is discussed and illustrate. An economic design of the proposed sampling system is also discussed and shown that the proposed sampling system has minimum total cost and average total inspection compared to other existing sampling plans.     

Designing of variables quick switching sampling system by considering process loss functions

This paper proposes a variables quick switching system where the quality characteristic of interest follows a normal distribution and the quality characteristic is evaluated through a process loss function. Most of the variables sampling plans available in the literature focus only on the fraction non-conforming and those plans do not distinguish between the products that fall within the specification limits. The products that fall within specification limits may not be good if their mean is too away from the target value. So developing a sampling plan by considering process loss is inevitable in these situations. Based on this idea, we develop a variables quick switching system based on the process loss function for the application of the processes requiring low process loss. Tables are also constructed for the selection of parameters of variables quick switching system for given acceptable quality level and limiting quality level. The results are explained with examples.     

Optimal designing of skip-lot sampling plan of type SkSP-2 with group acceptance sampling plan as reference plan under Burr-type XII distribution

In this paper, skip-lot sampling plan of type SkSP-2 with group acceptance sampling plans is proposed when the lifetime of the product follows the Burr-type XII distributions. The optimal parameters of the proposed plan are determined when two points on operating characteristics curve namely acceptable quality level and limiting quality level and the number of testers are specified. We also considered the Burr-type XII distribution to find the plan parameters. Several tables are given for practical use. We compare the results of proposed plan with the existing plans. Results are explained using real-world examples.     

Optimal design of repetitive group sampling plans for Weibull and gamma distributions with applications and comparison to the Birnbaum–Saunders distribution

In this paper, we propose a multiple deferred state repetitive group sampling plan which is a new sampling plan developed by incorporating the features of both multiple deferred state sampling plan and repetitive group sampling plan, for assuring Weibull or gamma distributed mean life of the products. The quality of the product is represented by the ratio of true mean life and specified mean life of the products. Two points on the operating characteristic curve approach is used to determine the optimal parameters of the proposed plan. The plan parameters are determined by formulating an optimization problem for various combinations of producer's risk and consumer's risk for both distributions. The sensitivity analysis of the proposed plan is discussed. The implementation of the proposed plan is explained using real-life data and simulated data. The proposed plan under Weibull distribution is compared with the existing sampling plans. The average sample number (ASN) of the proposed plan and failure probability of the product are obtained under Weibull, gamma and Birnbaum–Saunders distributions for a specified value of shape parameter and compared with each other. In addition, a comparative study is made between the ASN of the proposed plan under Weibull and gamma distributions.     

Designing an economically optimal repetitive group-sampling plan based on loss functions

Acceptance sampling is a quality assurance tool, which provides a rule for the producer and the consumer to make acceptance or rejection decision about a lot. This paper attempts to develop a more efficient sampling plan, variables repetitive group sampling plan, based on the total loss to the producer and consumer. To design this model, two constraints are considered to satisfy the opposing priorities and requirements of the producer and the consumer by using Acceptable quality level (AQL) and Limiting quality level (LQL) points on operating characteristic (OC) curve. The objective function of this model is constructed based on the total expected loss. In order to illustrate the application of the proposed model, an example is presented. In addition, the effects of process parameters on the optimal solution and the total expected loss are studied by performing a sensitivity analysis. Finally, the efficiency of the proposed model is compared with the variables single sampling plan, the variables double sampling plan and the repetitive group sampling plan of Balamurali and Jun (2006) in terms of average sample number, total expected loss and its difference with ideal OC curve.     

Two-Stage Variables Acceptance Sampling Plans Using Process Loss Functions

In this article, a variable two-stage acceptance sampling plan is developed when the quality characteristic is evaluated through a process loss function. The plan parameters of the proposed plan are determined by using the two-point approach and tabulated according to various quality levels. Two cases are discussed when the process mean lies at the target value and when it does not, respectively. Extensive tables are provided for both cases and the results are explained with examples. The advantage of the proposed plan is compared with the existing variable single acceptance sampling plan using the process loss function.     

A variables repetitive group sampling plan under failure-censored reliability tests for Weibull distribution

We propose a variables repetitive group sampling plan under type-II or failure-censored life testing when the lifetime of a part follows a Weibull distribution with a known shape parameter. The acceptance criteria do not involve unknown scale parameter differently from the existing plans. To determine the design parameters of the proposed plan, the usual approach of using two points on the operating characteristic curve is adopted and an optimization problem is formulated so as to minimize the average number of failures observed. Tables for design parameters are constructed when the quality of parts is represented by the unreliability or the ratio of the mean lifetime to the specified life. It is found that the proposed sampling plan can reduce the sample size significantly than do the single sampling plan.     

Multiple dependent state repetitive sampling plans with or without auxiliary variable

In this article, a new variable acceptance sampling plan has been developed using the multiple dependent state repetitive sampling scheme for the normal distribution. The plan parameters have been determined so as to minimize the average sample number while satisfying the producer's and the consumer's risks under the operating characteristic function. The multiple dependent state repetitive sampling scheme has also been extended to the case of utilizing an auxiliary variable. The proposed sampling plans are compared with the existing sampling plans.     

Acceptance Sampling Plans from Truncated Life Tests Based on the Birnbaum–Saunders Distribution for Percentiles

Time to failure due to fatigue is one of the common quality characteristics in material engineering applications. In this article, acceptance sampling plans are developed for the Birnbaum–Saunders distribution percentiles when the life test is truncated at a pre-specified time. The minimum sample size necessary to ensure the specified life percentile is obtained under a given customer's risk. The operating characteristic values (and curves) of the sampling plans as well as the producer's risk are presented. The R package named spbsq is developed to implement the developed sampling plans. Two examples with real data sets are also given as illustration.     

Acceptance Sampling Plans from Truncated Life Tests Based on the Generalized Birnbaum–Saunders Distribution

In this article, we develop acceptance sampling plans when the life test is truncated at a pre-fixed time. The minimum sample size necessary to ensure the specified median life is obtained by assuming that the lifetimes of the test units follow a generalized Birnbaum–Saunders distribution. The operating characteristic values of the sampling plans as well as producer's risk are presented. Two examples are also given to illustrate the procedure developed here, with one of them being based on a real data from software reliability.     

A Design of Attributes Double Sampling Plans for Three-class Products

In this article, a new attributes double sampling plan for three-class products (ADSPTP) is presented, and the corresponding operating characteristic function is constructed based on the given procedure of performing ADSPTP. Average sample numbers (ASN) for complete inspection and curtailed inspection of the second sample are derived and the extreme point is discussed on the three-dimensional ASN surface. In addition, the differences arising from different parameters are studied. Sampling plans are designed by a nonlinear optimization model. Finally, numerical examples and discussions are given to illustrate the obtained results, and tables of the designed plans under various conditions are provided.     

Predictive design of single sampling attribute plans

The design of a sampling inspection plan is usually based on the properties of the operating characteristic curve. This approach ensures that the plan has adequate power to discriminate a lot of acceptable quality from a lot rejectable quality. However, the designed plan need not necessarily have adequate predictive power when the sentenced lot is re-inspected using the same sampling plan. The paper introduces a new design approach for the single sampling attributes plan ensuring the decision of acceptance or rejection is consistent for both current and any future inspection of the lot. The proposed design controls the risks of a future sample leading to a contradictory decision of acceptance or rejection of the lot. An increase in sample size is required to achieve the required predictive power if the true lot quality fails to be at very low fraction non-conforming levels. A Bayesian analysis is also provided.     

A new sampling plan under the exponential distribution

This article considers a sampling plan when the quality characteristic follows the exponential distribution. We provide the exact approach and propose an approximated approach. In the proposed approximation, a new statistic combined with a Weibull transformation is used for the normal approximation. The plan parameters are obtained through the two-point approach at the acceptable quality level (AQL) and the limiting quality level (LQL). The tables for plan parameters are reported according to various values of the AQL and the LQL when the producer's and the consumer's risks are given. A real example is given to illustrate the proposed approximation approach.     

Minimum Size Double Sampling Plans for Large Isolated Lots

A common approach to the design of an acceptance sampling plan is to require that the operating characteristic (OC) curve should pass through two designated points that would fix the curve in accordance with a desired degree of discrimination. This paper presents a search procedure for the selection of double sampling inspection plans of type DSP - (0, 1) for specified two points on the OC curve, namely acceptance quality limit, producer's risk, limiting quality and consumer's risk. Selection of the plans is discussed for both the cases of fraction non-conforming and the number of non-conformities per unit.