A Note on the Regression of Order Statistics

This paper examines the relationships between the mean residual life functions of parallel and k-out-of-n systems with the regression of order statistics. Using these relationships, the results and properties about the mean residual life function of those systems can be used for the regression of order statistics and vice versa. Finally, the paper proposes a definition for the mean residual life function of a k-out-of-n system when the number of failed components of the system is known.     

Dynamic Reliability Evaluation of Consecutive-k-Within-m-Out-of-n:F System

A consecutive k-within-m-out-of-n:F system consists of n linearly ordered components and fails if and only if there are m consecutive components which include among them at least k failed components. This system model generalizes both consecutive k-out-of-n:F and k-out-of-n:F systems. In this article, we study the dynamic reliability properties of consecutive k-within-m-out-of-n:F system consisting of exchangeable dependent components. We also obtain some stochastic ordering results and use them to get simple approximation formulae for the survival function and mean time to failure of this system.     

On capacity evaluation for multi-state weighted k-out-of-n system

ABSTRACT

Weighted k-out-of-n system has been widely used in various engineering areas. Performance of such system is characterized by the total capacity of the components. Therefore, capacity evaluation is of great importance for research on the behavior of the system over time. Capacity evaluation for binary weighted k-out-of-n system has been reported in the literature. In this paper, to shorten computational time, we first develop a multiplication method for capacity evaluation of binary weighted k-out-of-n system. We then generalize capacity evaluation to multi-state weighted k-out-of-n system. Recursive algorithm and multiplication algorithm are developed for capacity evaluation for such system. Comparison is made of the two methods in different aspects. An illustrative example of an oil transmission system is presented to demonstrate the implementation of the proposed methods.     

Failure Data Analysis with Extended Weibull Distribution

A consecutive k-out-of-n: G system consists of n linearly ordered components functions if and only if at least k consecutive components function. In this article we investigate the consecutive k-out-of-n: G system in a setup of multicomponent stress-strength model. Under this setup, a system consists of n components functions if and only if there are at least k consecutive components survive a common random stress. We consider reliability and its estimation of such a system whenever there is a change and no change in strength. We provide minimum variance unbiased estimation of system reliability when the stress and strength distributions are exponential with unknown scale parameters. A nonparametric minimum variance unbiased estimator is also provided.     

Reliability Evaluation for a Multi-State System Under Stress-Strength Setup

The two most commonly used reliability models in engineering applications are binary k-out-of-n:G and consecutive k-out-of-n:G systems. Multi-state k-out-of-n:G and multi-state consecutive k-out-of-n:G systems have been proposed as an extension of these systems and they have been found to be more flexible tool for modeling engineering systems. In this article, multi-state systems, in particular, multi-state k-out-of-n:G and multi-state consecutive k-out-of-n:G, are considered in a stress-strength setup. The states of the system are classified considering the number of components whose strengths above (below) the multiple stresses available in an environment. The exact state probabilities are provided and the results are illustrated for various stress-strength distributions. Maximum likelihood estimators of state probabilities are also presented.     

Some Properties of Order Statistics When the Sample Size Is Random

ABSTRACT

The study of r-out-of-n systems is of utmost importance in reliability theory. In this note, we study closure of different partial orders under the formation of r-out-of-N and (N ? s)-out-of-N systems when the number of components N, forming the system, is a random variable having support {k, k + 1,…}, where k is a fixed positive integer, r ∈ {1,…, k} and s ∈ {0, 1,…, k ? 1}. This generalizes quite a few results already known in the literature. We also study the closure of different partial orders when two systems are formed out of different random number of components.     

Reliability and Some Characteristics of Circular Consecutive-k-Within-m-Out-of-n:F System

A system can be classified with respect to the physical arrangement of its components and the functioning principle. A circular consecutive k-within-m-out-of-n:F system consists of n circularly ordered components and fails if and only if there are m consecutive components that include among them at least k failed components. A circular consecutive k-within-m-out-of-n:F system turns into circular consecutive k-out-of-n:F for m = k and k-out-of-n:F system for m = n. In this study, signature-based analysis of circular consecutive k-within-m-out-of-n:F system is performed. A new approximation to this system is provided based on maximum number of failed components and an illustrative example is given for different values of n, m, k to compare the approximate results with simulated and exact results.     

On the Mean Remaining Strength of the k-Out-of-n:F System with Exchangeable Components

In this article, we consider the mean remaining strength of a k-out-of-n:F system in the stress–strength setup for the exchangeable components. We provide some results for parallel and series systems under this setup, where X₁, X₂, …, X_n are the strengths of the components designed under the common stress. An illustrative example is given for the k-out-of- n:F system using the multivariate FGM distribution.     

Extremum sieve estimation in k-out-of-n systems

This article considers the non parametric estimation of absolutely continuous distribution functions of independent lifetimes of non identical components in k-out-of-n systems, 2 ? k ? n, from the observed “autopsy” data. In economics, ascending “button” or “clock” auctions with n heterogeneous bidders with independent private values present 2-out-of-n systems. Classical competing risks models are examples of n-out-of-n systems. Under weak conditions on the underlying distributions, the estimation problem is shown to be well-posed and the suggested extremum sieve estimator is proven to be consistent. This article considers the sieve spaces of Bernstein polynomials which allow to easily implement constraints on the monotonicity of estimated distribution functions.     

Number of Working Components in Consecutive k-out-of-n System While It Is Working

In this article we study the distribution and expected value of the number of working components at time t in a consecutive k-out-of-n system under the condition that it is working at time t. We provide the exact distribution of the corresponding conditional random variable and compute its expected value for the system consisting of exchangeable dependent components. The results are also extended to any coherent system by the aid of system signature. Finally, we present illustrative and computational results for some systems having Lomax components.     

Mean Time to Failure of Weighted k-out-of-n: G Systems

The purpose of this article is to develop a Monte-Carlo simulation algorithm for computing mean time to failure (MTTF) of weighted-k-out-of-n:G and linear consecutive-weighted-k-out-of-n:G systems. Our algorithm is based on the use of appropriately defined stochastic process which represents the total weight of the system at time t. These stochastic processes are explicitly defined and used along with the ordered component lifetimes to simulate MTTF of the systems with weighted components.     

Reliability of weighted k-out-of-n: G systems consisting of two types of components and a cold standby component

In this article, the influence of a cold standby component to the reliability of weighted k-out-of-n: G systems consisting of two different types of components is studied. Weighted k-out-of-n: G systems are generalization of k-out-of-n systems that has attracted substantial interest in reliability theory because of their various applications in engineering. A method based on residual lifetimes of mixed components is presented for computing reliability of weighted k-out-of-n: G systems with two types of components and a cold standby component. Reliability and mean time to failure of different structured systems have been computed. Moreover, obtained results are used for defining optimal system configurations that can minimize the overall system costs.     

Some representation theorems in terms of mean residual lifetime and mean inactivity time of coherent systems

Abstract

In this paper, we consider a k-out-of-n system consisting of n identical components with independent lifetimes. We show that when the underlying distribution function F(t) is absolutely continuous, then it can be univocally determined by some particular mean residual lives or mean inactivity times of the system. It is then shown that these results may be extended to coherent (or mixed) systems.     

The mean general residual lifetime of (n − k + 1)-out-of-n systems with exchangeable components

The study of the reliability properties of (n ? k + 1)-out-of-n systems has gained a great deal of attention, from both theoretical and practical perspectives. In this article, we consider (n ? k + 1)-out-of-n systems with exchangeable components and study the stochastic properties of two forms of residual lifetimes of such systems under the following conditions: n ? r + 1 (r ? k) components of the system are operating at time t > 0, and/or the rth (r < k) component has failed, but the system is working at time t. In addition, some results relating to the functions of the mean general residual lifetimes (MGRL) are derived for these systems. Finally, in accordance with the generalized Farlie–Gumbel–Morgenstern model, we present the reliability properties of the general residual lifetime of (n ? k + 1)-out-of-n systems and investigate the asymptotic behavior of the proposed MGRL functions with exponential marginals.     

Reliability analysis of systems with components having two dependent subcomponents

In this article, a system that consists of n independent components each having two dependent subcomponents (A_i, B_i), i = 1, …, n is considered. The system is assumed to compose of components that have two correlated subcomponents (A_i, B_i), and functions iff both systems of subcomponents A₁, A₂, …, A_n and B₁, B₂, …, B_n work under certain structural rules. The expressions for reliability and mean time to failure of such systems are obtained. A sufficient condition to compare two systems of bivariate components in terms of stochastic ordering is also presented.     

A note on the mean past and the mean residual life of a (n − k + 1)-out-of-n system under multi monitoring

In the study of the reliability of technical systems, k-out-of-n systems play an important role. In the present paper, we consider a (n − k + 1)-out-of-n system consisting of n identical components such that the lifetimes of components are independent and have a common distribution function F. It is assumed that the number of monitoring is l and the total number of failures of the components at time t _i is m _i , i = 1, . . . , l − 1. Also at time t _l (t ₁ < . . . < t _l ) the system have failed or the system is still working. Under these conditions, the mean past lifetime, the mean residual lifetime of system and their properties are investigated.     

On residual lifetimes in sequential (n ? k?+?1)-out-of-n systems

Sequential order statistics is an extension of ordinary order statistics. They model the successive failure times in sequential k-out-of-n systems, where the failures of components possibly affect the residual lifetimes of the remaining ones. In this paper, we consider the residual lifetime of the components after the kth failure in the sequential (n − k + 1)-out-of-n system. We extend some results on the joint distribution of the residual lifetimes of the remaining components in an ordinary (n − k + 1)-out-of-n system presented in Bairamov and Arnold (Stat Probab Lett 78(8):945–952, 2008) to the case of the sequential (n − k + 1)-out-of-n system.     

A Sensitivity Analysis for System Reliability

In terms of the relationship between the lower confidence limits of reliabilities for system and component, using the finite Markov chain imbedding approach, we analyze the sensitivity of reliability for a linear consecutive-k-out-of-n:F system, a circular consecutive-k-out-of-n:F system, and a k-within-consecutive-r-out-of-n:F system. The analysis is based on two parameters: the number of experiments and the number of failed components.     

On the Failure Probability of Used Coherent Systems

In analyzing the lifetime properties of a coherent system, the concept of “signature” is a useful tool. Let T be the lifetime of a coherent system having n iid components. The signature of the system is a probability vector s=(s₁, s₂, …, s_n), such that s_i=P(T=X_i:n), where, X_i:n, i=1, 2, …, n denote the ordered lifetimes of the components. In this note, we assume that the system is working at time t>0. We consider the conditional signature of the system as a vector in which the ith element is defined as p_i(t)=P(T=X_i:n|T>t) and investigate its properties as a function of time.