A Modification of a Percentile Estimation Procedure Based on Generalized Polya Urns

Adaptive designs find an important application in the estimation of unknown percentiles for an underlying dose-response curve. A nonparametric adaptive design was suggested by Mugno et al. (2004 Mugno, R.A., Zhus, W., Rosenberger, W.F. (2004). Adaptive urn designs for estimating several percentiles of a dose-response curve. Statist. Med. 23(13):2137–2150.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]) to simultaneously estimate multiple percentiles of an unknown dose-response curve via generalized Polya urns. In this article, we examine the properties of the design proposed by Mugno et al. (2004 Mugno, R.A., Zhus, W., Rosenberger, W.F. (2004). Adaptive urn designs for estimating several percentiles of a dose-response curve. Statist. Med. 23(13):2137–2150.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]) when delays in observing responses are encountered. Using simulations, we evaluate a modification of the design under varying group sizes. Our results demonstrate unbiased estimation with minimal loss in efficiency when compared to the original compound urn design.     

On generalized exponential chain ratio estimators under stratified two-phase random sampling

Sanaullah et al. (2014 Sanaullah, A., Ali, H.M., Noor ul Amin, M., Hanif, M. (2014). Generalized exponential chain ratio estimators under stratified two-phase random sampling. Appl. Math. Comput. 226:541–547.[Crossref], [Web of Science ®] , [Google Scholar]) have suggested generalized exponential chain ratio estimators under stratified two-phase sampling scheme for estimating the finite population mean. However, the bias and mean square error (MSE) expressions presented in that work need some corrections, and consequently the study based on efficiency comparison also requires corrections. In this article, we revisit Sanaullah et al. (2014 Sanaullah, A., Ali, H.M., Noor ul Amin, M., Hanif, M. (2014). Generalized exponential chain ratio estimators under stratified two-phase random sampling. Appl. Math. Comput. 226:541–547.[Crossref], [Web of Science ®] , [Google Scholar]) estimator and provide the correct bias and MSE expressions of their estimator. We also propose an estimator which is more efficient than several competing estimators including the classes of estimators in Sanaullah et al. (2014 Sanaullah, A., Ali, H.M., Noor ul Amin, M., Hanif, M. (2014). Generalized exponential chain ratio estimators under stratified two-phase random sampling. Appl. Math. Comput. 226:541–547.[Crossref], [Web of Science ®] , [Google Scholar]). Three real datasets are used for efficiency comparisons.     

Using the Inverse Maximum Ratio-Λ as a Technique to Quantify Surface Uniformity

Techniques used in variability assessment are subsequently used to draw conclusions regarding the “spread”/uniformity of data curves. Due to the limitations of these techniques, they are not adequate for circumstances where data manifest with multiple peaks. Examples of these manifestations (in three-dimensional space) include under-foot pressure distributions recorded for different types of footwear (Becerro-de-Bengoa-Vallejo et al., 2014 Biau, D.J. (2011). In brief: Standard deviation and standard error. Clinical Orthopaedics and Related Research 469(9):2661–2664.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]; Cibulka et al., 1994 Cibulka, M.T., Sinacore, D.R., Mueller, M.J. (1994). Shin splints and forefoot contact running: A case report. Journal of Orthopaedic &; Sports Physical Therapy 20(2):98–102.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]; Davies et al., 2003 Davies, M.B., Betts, R.P., Scott, I.R. (2003). Optical plantar pressure analysis following internal fixation for displaced intra-articular os calcis fractures. Foot &; Ankle International 24(11):851–856.[PubMed], [Web of Science ®] , [Google Scholar]), surface textures and interfaces designed to impact friction, and and and molecular surface structures such as viral epitopes (Torras and Garcia-Valls, 2004 Torras, C., Garcia-Valls, R. (2004). Quantification of membrane morphology by interpretation of scanning electron microscopy images. Journal of Membrane Science 233(1–2):119–127.[Crossref], [Web of Science ®] , [Google Scholar]; Pacejka, 1997; Fustaffson, 1997). This article proposes a technique for generating a single variable – Λ that will quantify the uniformity of such surfaces. We define and validate this technique using several mathematical and graphical models.     

On weighted cumulative residual entropy

In analogy with the weighted Shannon entropy proposed by Belis and Guiasu (1968 Belis, M., Guiasu, S. (1968). A quantitative-qualitative measure of information in cybernetic systems. IEEE Trans. Inf. Th. IT-4:593–594.[Crossref], [Web of Science ®] , [Google Scholar]) and Guiasu (1986 Guiasu, S. (1986). Grouping data by using the weighted entropy. J. Stat. Plann. Inference 15:63–69.[Crossref], [Web of Science ®] , [Google Scholar]), we introduce a new information measure called weighted cumulative residual entropy (WCRE). This is based on the cumulative residual entropy (CRE), which is introduced by Rao et al. (2004 Rao, M., Chen, Y., Vemuri, B.C., Wang, F. (2004). Cumulative residual entropy: a new measure of information. IEEE Trans. Info. Theory 50(6):1220–1228.[Crossref], [Web of Science ®] , [Google Scholar]). This new information measure is “length-biased” shift dependent that assigns larger weights to larger values of random variable. The properties of WCRE and a formula relating WCRE and weighted Shannon entropy are given. Related studies of reliability theory is covered. Our results include inequalities and various bounds to the WCRE. Conditional WCRE and some of its properties are discussed. The empirical WCRE is proposed to estimate this new information measure. Finally, strong consistency and central limit theorem are provided.     

An efficient use of moment's ratios of scrambling variables in a randomized response technique

This paper aimed at providing an efficient new unbiased estimator for estimating the proportion of a potentially sensitive attribute in survey sampling. The suggested randomization device makes use of the means, variances of scrambling variables, and the two scalars lie between “zero” and “one.” Thus, the same amount of information has been used at the estimation stage. The variance formula of the suggested estimator has been obtained. We have compared the proposed unbiased estimator with that of Kuk (1990 Kuk, A.Y.C. (1990). Asking sensitive questions inderectely. Biometrika 77:436–438.[Crossref], [Web of Science ®] , [Google Scholar]) and Franklin (1989 Franklin, L.A. (1989). A comparision of estimators for randomized response sampling with continuous distribution s from a dichotomous population. Commun. Stat. Theor. Methods 18:489–505.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]), and Singh and Chen (2009 Singh, S., Chen, C.C. (2009). Utilization of higher order moments of scrambling variables in randomized response sampling. J. Stat. Plann. Inference. 139:3377–3380.[Crossref], [Web of Science ®] , [Google Scholar]) estimators. Relevant conditions are obtained in which the proposed estimator is more efficient than Kuk (1990 Kuk, A.Y.C. (1990). Asking sensitive questions inderectely. Biometrika 77:436–438.[Crossref], [Web of Science ®] , [Google Scholar]) and Franklin (1989 Franklin, L.A. (1989). A comparision of estimators for randomized response sampling with continuous distribution s from a dichotomous population. Commun. Stat. Theor. Methods 18:489–505.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) and Singh and Chen (2009 Singh, S., Chen, C.C. (2009). Utilization of higher order moments of scrambling variables in randomized response sampling. J. Stat. Plann. Inference. 139:3377–3380.[Crossref], [Web of Science ®] , [Google Scholar]) estimators. The optimum estimator (OE) in the proposed class of estimators has been identified which finally depends on moments ratios of the scrambling variables. The variance of the optimum estimator has been obtained and compared with that of the Kuk (1990 Kuk, A.Y.C. (1990). Asking sensitive questions inderectely. Biometrika 77:436–438.[Crossref], [Web of Science ®] , [Google Scholar]) and Franklin (1989 Franklin, L.A. (1989). A comparision of estimators for randomized response sampling with continuous distribution s from a dichotomous population. Commun. Stat. Theor. Methods 18:489–505.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) estimator and Singh and Chen (2009 Singh, S., Chen, C.C. (2009). Utilization of higher order moments of scrambling variables in randomized response sampling. J. Stat. Plann. Inference. 139:3377–3380.[Crossref], [Web of Science ®] , [Google Scholar]) estimator. It is interesting to mention that the “optimum estimator” of the class of estimators due to Singh and Chen (2009 Singh, S., Chen, C.C. (2009). Utilization of higher order moments of scrambling variables in randomized response sampling. J. Stat. Plann. Inference. 139:3377–3380.[Crossref], [Web of Science ®] , [Google Scholar]) depends on the parameter π under investigation which limits the use of Singh and Chen (2009 Singh, S., Chen, C.C. (2009). Utilization of higher order moments of scrambling variables in randomized response sampling. J. Stat. Plann. Inference. 139:3377–3380.[Crossref], [Web of Science ®] , [Google Scholar]) OE in practice while the proposed OE in this paper is free from such a constraint. The proposed OE depends only on the moments ratios of scrambling variables. This is an advantage over the Singh and Chen (2009 Singh, S., Chen, C.C. (2009). Utilization of higher order moments of scrambling variables in randomized response sampling. J. Stat. Plann. Inference. 139:3377–3380.[Crossref], [Web of Science ®] , [Google Scholar]) estimator. Numerical illustrations are given in the support of the present study when the scrambling variables follow normal distribution. Theoretical and empirical results are very sound and quite illuminating in the favor of the present study.     

On the optimal allocation of active redundancies in series system

This paper studies the allocations of two non identical active redundancies in series systems in terms of the reversed hazard rate order and hazard rate order, which generalizes some results built in Valdés and Zequeira (2003 Valdés, J. E., and R. I. Zequeira 2003. On the optimal allocation of an active redundancy in a two-component series system. Stat. Probab. Lett. 63:325–32.[Crossref], [Web of Science ®] , [Google Scholar], 2006 Valdés, J. E., and R. I. Zequeira 2006. On the optimal allocation of two active redundancies in a two-component series system. Oper. Res. Lett. 34:49–52.[Crossref], [Web of Science ®] , [Google Scholar]).     

Buffered Autoregressive Models With Conditional Heteroscedasticity: An Application to Exchange Rates

This article introduces a new model called the buffered autoregressive model with generalized autoregressive conditional heteroscedasticity (BAR-GARCH). The proposed model, as an extension of the BAR model in Li et al. (2015 Li, G.D., Guan, B., Li, W.K., and Yu, P. L.H. (2015), “Hysteretic Autoregressive Time Series Models,” Biometrika, 102, 717–723.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]), can capture the buffering phenomena of time series in both the conditional mean and variance. Thus, it provides us a new way to study the nonlinearity of time series. Compared with the existing AR-GARCH and threshold AR-GARCH models, an application to several exchange rates highlights the importance of the BAR-GARCH model.     

Multiple dependent state repetitive sampling plans based on one-sided process capability indices

In this research, multiple dependent state and repetitive group sampling are used to design a variable sampling plan based on one-sided process capability indices, which consider the quality of the current lot as well as the quality of the preceding lots. The sample size and critical values of the proposed plan are determined by minimizing the average sample number while satisfying the producer's risk and consumer's risk at corresponding quality levels. In addition, comparisons are made with the existing sampling plans [Pearn and Wu (2006a Pearn, W. L., and C. W. Wu. 2006a. Critical acceptance values and sample sizes of a variables sampling plan for very low fraction of defectives. Omega: International Journal of Management Science 34 (1):90–101.[Crossref], [Web of Science ®] , [Google Scholar]), Yen et al. (2015 Yen, C. H., C. H. Chang, and M. Aslam. 2015. Repetitive variable acceptance sampling plan for one-sided specification. Journal of Statistical Computation and Simulation 85 (6):1102–16.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar])] in terms of average sample number and operating characteristic curve. Finally, an example is provided to illustrate the proposed plan.     

On extreme order statistics from heterogeneous beta distributions with applications

This paper treats the problem of stochastic comparisons for the extreme order statistics arising from heterogeneous beta distributions. Some sufficient conditions involved in majorization-type partial orders are provided for comparing the extreme order statistics in the sense of various magnitude orderings including the likelihood ratio order, the reversed hazard rate order, the usual stochastic order, and the usual multivariate stochastic order. The results established here strengthen and extend those including Kochar and Xu (2007 Kochar, S.C., Xu, M. (2007). Stochastic comparisons of parallel systems when components have proportional hazard rates. Probab. Eng. Inf. Sci. 21:597–609.[Crossref], [Web of Science ®] , [Google Scholar]), Mao and Hu (2010 Mao, T., Hu, T. (2010). Equivalent characterizations on orderings of order statistics and sample ranges. Probab. Eng. Inf. Sci. 24:245–262.[Crossref], [Web of Science ®] , [Google Scholar]), Balakrishnan et al. (2014 Balakrishnan, N., Barmalzan, G., Haidari, A. (2014). On usual multivariate stochastic ordering of order statistics from heterogeneous beta variables. J. Multivariate Anal. 127:147–150.[Crossref], [Web of Science ®] , [Google Scholar]), and Torrado (2015 Torrado, N. (2015). On magnitude orderings between smallest order statistics from heterogeneous beta distributions. J. Math. Anal. Appl. 426:824–838.[Crossref], [Web of Science ®] , [Google Scholar]). A real application in system assembly and some numerical examples are also presented to illustrate the theoretical results.     

An objective Bayesian estimation in a two-period crossover design

Two-period crossover design is one of the commonly used designs in clinical trials. But, the estimation of treatment effect is complicated by the possible presence of carryover effect. It is known that ignoring the carryover effect when it exists can lead to poor estimates of the treatment effect. The classical approach by Grizzle (1965 Grizzle, J.E. (1965). The two-period change-over design and its use in clinical trials. Biometrics 21:467–480. See Grizzle (1974) for corrections.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]) consists of two stages. First, a preliminary test is conducted on carryover effect. If the carryover effect is significant, analysis is based only on data from period one; otherwise, analysis is based on data from both periods. A Bayesian approach with improper priors was proposed by Grieve (1985 Grieve, A.P. (1985). A Bayesian analysis of the two-period crossover design for clinical trials. Biometrics 41:979–990.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]) which uses a mixture of two models: a model with carryover effect and another without. The indeterminacy of the Bayes factor due to the arbitrary constant in the improper prior was addressed by assigning a minimally discriminatory value to the constant. In this article, we present an objective Bayesian estimation approach to the two-period crossover design which is also based on a mixture model, but using the commonly recommended Zellner–Siow g-prior. We provide simulation studies and a real data example and compare the numerical results with Grizzle (1965 Grizzle, J.E. (1965). The two-period change-over design and its use in clinical trials. Biometrics 21:467–480. See Grizzle (1974) for corrections.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar])’s and Grieve (1985 Grieve, A.P. (1985). A Bayesian analysis of the two-period crossover design for clinical trials. Biometrics 41:979–990.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar])’s approaches.     

A Bayesian control chart for a common coefficient of variation

By using the medical data analyzed by Kang et al. (2007 Kang, C.W., Lee, M.S., Seong, Y.J., Hawkins, D.M. (2007). A control chart for the coefficient of variation. J. Qual. Technol. 39(2):151–158.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]), a Bayesian procedure is applied to obtain control limits for the coefficient of variation. Reference and probability matching priors are derived for a common coefficient of variation across the range of sample values. By simulating the posterior predictive density function of a future coefficient of variation, it is shown that the control limits are effectively identical to those obtained by Kang et al. (2007 Kang, C.W., Lee, M.S., Seong, Y.J., Hawkins, D.M. (2007). A control chart for the coefficient of variation. J. Qual. Technol. 39(2):151–158.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) for the specific dataset they used. This article illustrates the flexibility and unique features of the Bayesian simulation method for obtaining posterior distributions, predictive intervals, and run-lengths in the case of the coefficient of variation. A simulation study shows that the 95% Bayesian confidence intervals for the coefficient of variation have the correct frequentist coverage.     

Matrix mean squared error comparisons of some biased estimators with two biasing parameters

To deal with multicollinearity problem, the biased estimators with two biasing parameters have recently attracted much research interest. The aim of this article is to compare one of the last proposals given by Yang and Chang (2010 Yang, H., and X. Chang. 2010. A new two-parameter estimator in linear regression. Communications in Statistics: Theory and Methods 39 (6):923–34.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) with Liu-type estimator (Liu 2003 Liu, K. 2003. Using Liu-type estimator to combat collinearity. Communications in Statistics: Theory and Methods 32 (5):1009–20.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) and k ? d class estimator (Sakallioglu and Kaciranlar 2008 Sakallioglu, S., and S. Kaciranlar. 2008. A new biased estimator based on ridge estimation. Statistical Papers 49:669–89.[Crossref], [Web of Science ®] , [Google Scholar]) under the matrix mean squared error criterion. As well as giving these comparisons theoretically, we support the results with the extended simulation studies and real data example, which show the advantages of the proposal given by Yang and Chang (2010 Yang, H., and X. Chang. 2010. A new two-parameter estimator in linear regression. Communications in Statistics: Theory and Methods 39 (6):923–34.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) over the other proposals with increasing multicollinearity level.     

Improved Exponential Type Estimators of the Mean of a Sensitive Variable in the Presence of Nonsensitive Auxiliary Information

Recently, Koyuncu et al. (2013 Koyuncu, N., Gupta, S., Sousa, R. (2014). Exponential type estimators of the mean of a sensitive variable in the presence of non-sensitive auxiliary information. Communications in Statistics- Simulation and Computation[PubMed], [Web of Science ®] , [Google Scholar]) proposed an exponential type estimator to improve the efficiency of mean estimator based on randomized response technique. In this article, we propose an improved exponential type estimator which is more efficient than the Koyuncu et al. (2013 Koyuncu, N., Gupta, S., Sousa, R. (2014). Exponential type estimators of the mean of a sensitive variable in the presence of non-sensitive auxiliary information. Communications in Statistics- Simulation and Computation[PubMed], [Web of Science ®] , [Google Scholar]) estimator, which in turn was shown to be more efficient than the usual mean estimator, ratio estimator, regression estimator, and the Gupta et al. (2012 Gupta, S., Shabbir, J., Sousa, R., Corte-Real, P. (2012). Regression estimation of the mean of a sensitive variable in the presence of auxiliary information. Communications in Statistics – Theory and Methods 41:2394–2404.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) estimator. Under simple random sampling without replacement (SRSWOR) scheme, bias and mean square error expressions for the proposed estimator are obtained up to first order of approximation and comparisons are made with the Koyuncu et al. (2013 Koyuncu, N., Gupta, S., Sousa, R. (2014). Exponential type estimators of the mean of a sensitive variable in the presence of non-sensitive auxiliary information. Communications in Statistics- Simulation and Computation[PubMed], [Web of Science ®] , [Google Scholar]) estimator. A simulation study is used to observe the performances of these two estimators. Theoretical findings are also supported by a numerical example with real data. We also show how to, extend the proposed estimator to the case when more than one auxiliary variable is available.     

Bayesian Estimation for Linear Functions of Poisson Rates

The probability matching prior for linear functions of Poisson parameters is derived. A comparison is made between the confidence intervals obtained by Stamey and Hamilton (2006 Stamey, J., Hamilton, C. (2006). A note on confidence intervals for a linear function of Poisson rates. Commun. Statist. Simul. &; Computat. 35(4):849–856.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]), and the intervals derived by us when using the Jeffreys’ and probability matching priors. The intervals obtained from the Jeffreys’ prior are in some cases fiducial intervals (Krishnamoorthy and Lee, 2010 Krishnamoorthy, K., Lee, M. (2010). Inference for functions of parameters in discrete distributions based on fiducial approach: Binomial and Poisson cases. J. Statist. Plann. Infere. 140(5):1182–1192.[Crossref], [Web of Science ®] , [Google Scholar]). A weighted Monte Carlo method is used for the probability matching prior. The power and size of the test, using Bayesian methods, is compared to tests used by Krishnamoorthy and Thomson (2004 Krishnamoorthy, K., Thomson, J. (2004). A more powerful test for comparing two Poisson means. J. Statist. Plann. Infere. 119(1):23–35.[Crossref], [Web of Science ®] , [Google Scholar]). The Jeffreys’, probability matching and two other priors are used.     

A modified Hosmer–Lemeshow test for large data sets

The Hosmer–Lemeshow test is a widely used method for evaluating the goodness of fit of logistic regression models. But its power is much influenced by the sample size, like other chi-square tests. Paul, Pennell, and Lemeshow (2013 Paul, P., M. L. Pennell, and S. Lemeshow. 2013. Standardizing the power of the Hosmer–Lemeshow goodness of fit test in large data sets. Statistics in Medicine 32:67–80.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]) considered using a large number of groups for large data sets to standardize the power. But simulations show that their method performs poorly for some models. In addition, it does not work when the sample size is larger than 25,000. In the present paper, we propose a modified Hosmer–Lemeshow test that is based on estimation and standardization of the distribution parameter of the Hosmer–Lemeshow statistic. We provide a mathematical derivation for obtaining the critical value and power of our test. Through simulations, we can see that our method satisfactorily standardizes the power of the Hosmer–Lemeshow test. It is especially recommendable for enough large data sets, as the power is rather stable. A bank marketing data set is also analyzed for comparison with existing methods.     

On dynamic weighted survival entropy of order α

Recently, Abbasnejad et al. (2010 Abbasnejad, M., Arghami, N.R., Morgenthaler, S., Mohtashami Borzadaran, G.R. (2010). On the dynamic survival entropy. Stat. Probab. Lett. 80:1962–1971.[Crossref], [Web of Science ®] , [Google Scholar]) proposed a measure of uncertainty based on survival function, called the survival entropy of order α. A dynamic form of the survival entropy of order α is also proposed by them. In this paper, we derive the weighted form of these measures. The properties of the new measures are also discussed.     

Performance of some ridge regression estimators for the multinomial logit model

This article considers several estimators for estimating the ridge parameter k for multinomial logit model based on the work of Khalaf and Shukur (2005 Khalaf, G., and G. Shukur. 2005. Choosing ridge parameters for regression problems. Commun. Statist. Theor. Meth., 34:1177–1182.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]), Alkhamisi et al. (2006 Alkhamisi, M., G. Khalaf, and G. Shukur. 2006. Some modifications for choosing ridge parameters. Commun. Statist. Theor. Meth. 35:2005–2020.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]), and Muniz et al. (2012 Muniz, G., B. M. G. Kibria, K. Månsson, and G. Shukur. 2012. On developing ridge regression parameters: A graphical investigation. in SORT. 36: 115–138.[Web of Science ®] , [Google Scholar]). The mean square error (MSE) is considered as the performance criterion. A simulation study has been conducted to compare the performance of the estimators. Based on the simulation study we found that increasing the correlation between the independent variables and the number of regressors has negative effect on the MSE. However, when the sample size increases the MSE decreases even when the correlation between the independent variables is large. Based on the minimum MSE criterion some useful estimators for estimating the ridge parameter k are recommended for the practitioners.     

Some extensions of circular balanced and circular strongly balanced repeated measurements designs

Repeated measurement designs are widely used in medicine, pharmacology, animal sciences, and psychology. In this paper the works of Iqbal and Tahir (2009 Iqbal, I., and M. H. Tahir. 2009. Circular strongly balanced repeated measurements designs. Communications in Statistics—Theory and Methods 38:3686–96.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) and Iqbal, Tahir, and Ghazali (2010 Iqbal, I., M. H. Tahir, and S. S. A. Ghazali. 2010. Circular first- and second-order balanced repeated measurements designs. Communications in Statistics—Theory and Methods 39:228–40.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) are generalized for the construction of circular-balanced and circular strongly balanced repeated measurements designs through the method of cyclic shifts for three periods.     

Characterization results based on dynamic Tsallis cumulative residual entropy

In this article, the concept of cumulative residual entropy (CRE) given by Rao et al. (2004 Rao, M., Chen, Y., Vemuri, B.C., Wang, F. (2004). Cumulative residual entropy: A new measure of information. IEEE Trans. Inf. Theory 50:1220–1228.[Crossref], [Web of Science ®] , [Google Scholar]) is extended to Tsallis entropy function and dynamic version, both residual and past of it. We study some properties and characterization results for these generalized measures. In addition, we provide some characterization results of the first-order statistic based on the Tsallis survival entropy.     

Linear transformation models for survival analysis with tumor growth information in cancer screening study

The complication in analyzing tumor data is that the tumors detected in a screening program tend to be slowly progressive tumors, which is the so-called left-truncated sampling that is inherent in screening studies. Under the assumption that all subjects have the same tumor growth function, Ghosh (2008 Ghosh, D. (2008). Proportional hazards regression for cancer studies. Biometrics 64:141–148.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]) developed estimation procedures for the Cox proportional hazards model. Shen (2011a Shen, P.-S. (2011a). Proportional hazards regression for cancer screening data. J. Stat. Comput. Simul. 18:367–377.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) demonstrated that Ghosh (2008 Ghosh, D. (2008). Proportional hazards regression for cancer studies. Biometrics 64:141–148.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar])'s approach can be extended to the case when each subject has a specific growth function. In this article, under linear transformation model, we present a general framework to the analysis of data from cancer screening studies. We developed estimation procedures under linear transformation model, which includes Cox's model as a special case. A simulation study is conducted to demonstrate the potential usefulness of the proposed estimators.