Some new construction of circular weakly balanced repeated measurements designs in periods of two different sizes

Abstract

Balanced repeated measurements designs (RMDs) balance out the residual effects. Williams Latin square designs work as minimal combinatorial balanced as well as variance balanced for RMDs for p (period sizes) = v (number of treatments). If minimal balanced RMDs cannot be constructed for the situations where p must be less than v then weakly balanced RMDs should be preferred. In this article, some generators are developed to generate circular weakly balanced RMDs in periods of two different sizes. To obtain the proposed designs, some construction procedures are also described for some of the cases where we could not develop generators.     

Partially efficiency-balanced designs-II

efficiency balanced (£R) and partially efficiency balanced (PEB) designs were studied hy Calinski (1971) and Puri and Higam (1971, 1977a). In tais paper we have studied the dual desinas of two classes of PEB designs. It is shown that the dual of any symmetrical PCS design with HN'=N'H is again a PEB design. Also the dual of a PEB(S) with μ₁ = 0 μ₂ = 0and is shown to the again a PEB(S). The relations between PEB designs and linked and partially linked blocks have heen established. As a conseguence, the analysis of linked Mock and partially linkei block designs can he sinrlififid. Sore useful classes of supplencntcd block designs having simple analysis have also been discussed.     

Non binary partially neighbor balanced designs for circular blocks

ABSTRACT

Neighbor designs are recommended for the cases where the performance of treatment is affected by the neighboring treatments as in biometrics and agriculture. In this paper we have constructed two new series of non binary partially neighbor balanced designs for v = 2n and v = 2n+1 number of treatments, respectively. The blocks in the design are non binary and circular but no treatment is ever a neighbor to itself. The designs proposed here are partially balanced in terms of nearest neighbors. No such series are known in the literature.     

Optimal partially balanced nested row-column designs

A partially balanced nested row-column design, referred to as PBNRC, is defined as an arrangement of v treatments in b p × q blocks for which, with the convention that p q, the information matrix for the estimation of treatment parameters is equal to that of the column component design which is itself a partially balanced incomplete block design. In this paper, previously known optimal incomplete block designs, and row-column and nested row-column designs are utilized to develop some methods of constructing optimal PBNRC designs. In particular, it is shown that an optimal group divisible PBNRC design for v = mn kn treatments in p × q blocks can be constructed whenever a balanced incomplete block design for m treatments in blocks of size k each and a group divisible PBNRC design for kn treatments in p × q blocks exist. A simple sufficient condition is given under which a group divisible PBNRC is Ψ_f-better for all f> 0 than the corresponding balanced nested row-column designs having binary blocks. It is also shown that the construction techniques developed particularly for group divisible designs can be generalized to obtain PBNRC designs based on rectangular association schemes.     

Designs balanced for circular residual effects

Magda (1980) introduced a model for repeated measurements designs with a circular structure of the residual effects. He proved the universal optimality of circular balanced uniform designs over a subclass of the possible designs. We strengthen his result to optimality over the set of all designs with the same number of experimental units, periods and treatments.     

A note on circular neighbor balanced designs

ABSTRACT

This paper describes some methods of constructing circular neighbor balanced and circular partially neighbor balanced block designs for estimation of direct and neighbor effects of the treatments. A class of circular neighbor balanced block designs with unequal block sizes is also proposed.     

Nonproper variance balanced designs and optimality

This communication deals with the construction and optimality of non-proper (unequal block sized) variance balanced (VB) designs obtainable under linear homoscedastic normal model. Several methods of construction of non-proper VB designs have been given. Some constructed designs are universally optimal non-proper variance balanced designs.     

Universally Optimal Designs Balanced for Neighbor Effects

The performance of a treatment is affected by the treatments applied to its adjacent plots, especially in the experiments of agriculture, horticulture, forestry, serology and industry. Neighbor designs ensure that treatment comparisons are least affected by neighbor effects, therefore, this is a rich field of investigation. In this paper, criterion for construction of universally optimal neighbor balanced designs is discussed.     

Minimal circular balanced repeated measurement designs in unequal period sizes

Abstract

Repeated measurement designs (RMDs) are widely used in medicine, pharmacology, animal sciences and psychology. In these fields, there are several situations where these designs should be used in periods of different sizes. With the use of RMD, residual effects or carry over effects may arise and balanced RMDs are solution to this problem. In this article, therefore, some infinite series are developed through method of cyclic shifts to obtain circular balanced repeated measurements designs in periods of two different sizes.     

Balanced 2m factorial designs of resolution v which allow search and estimation of one extra unknown effect, 4 ≤ m ≤ 8

In this paper, we obtain balanced resolution V plans for 2^m factorial experiments (4 ≤ m ≤ 8), which have an additional feature. Instead of assuming that the three factor and higher order effects are all zero, we assume that there is at most one nonnegligible effect among them; however, we do not know which particular effect is nonnegligible. The problem is to search which effect is non-negligible and to estimate it, along with estimating the main effects and two factor interactions etc., as in an ordinary resolution V design. For every value of N (the number of treatments) within a certain practical range, we present a design using which the search and estimation can be carried out. (Of course, as in all statistical problems, the probability of correct search will depend upon the size of “error” or “noise” present in the observations. However, the designs obtained are such that, at least in the noiseless case, this probability equals 1.) It is found that many of these designs are identical with optimal balanced resolution V designs obtained earlier in the work of Srivastava and Chopra.     

Some New Residual Treatment Effects Designs for Comparing Test Treatments with a Control

Pigeon & Raghavarao (1987) introduced control balanced residual treatment effects designs for the situation where one treatment is a control or standard and is to be compared with the v test treatments, and they have also given methods of construction of control balanced residual treatment effects designs and have investigated their efficiencies. In this paper we have developed some new families of control balanced residual treatment effects designs, which are Schur-optimal.     

Construction of Cross-Over Designs for Comparing Test Treatments with Control Using Terraces

Segregated half-and-half and mutually orthogonal power sequence terraces have been used in this article for the construction of some new families of control balanced cross-over designs, which are Schur-optimal. One of the advantages of using terraces is that designs with larger number of treatments can also be constructed with relative ease. Designs up to 17 treatments have been constructed in this article.     

COMPUTER-AIDED CONSTRUCTION OF SMALL (M, S)-OPTIMAL INCOMPLETE BLOCK DESIGNS

A new exchange algorithm for the construction of (M, S)-optimal incomplete block designs (IBDS) is developed. This exchange algorithm is used to construct 973 (M, S)-optimal IBDs (v, k, b) for v= 4,…,12 (varieties) with arbitrary v, k (block size) and b (number of blocks). The efficiencies of the “best” (M, S)-optimal IBDs constructed by this algorithm are compared with the efficiencies of the corresponding nearly balanced incomplete block designs (NBIBDs) of Cheng(1979), Cheng & Wu (1981) and Mitchell & John(1976).     

Optimal repeated measurements designs for comparing test treatments with a control

A-optimal and mv optimal repeated measurments designs for comparing serveral test treatments with a control are considered. the models considered are basically of two types: without preperides and the cirular model. It is shown known that some known strongly balanced uniform repeated measurements designs can be modified to obtain optimal designs for this problem. Some other methods of finding optimal designs are also given.     

Construction of circular partially balanced-Repeated measurement designs using cyclic shifts

Repeated measurement designs are widely used in medicine, pharmacology, animal sciences and psychology. These designs balance out the residual effects. The situations where balanced repeated measurements designs require a large number of the subjects, partially-balanced repeated measurements designs should be used. In this paper some infinite series are developed which provide circular partially-balanced repeated measurement designs for p (periods) even. Catalogues of circular partially-balanced repeated measurement designs are also presented for v (treatments) ≤ 100 with p = 5, 7 & 9.     

Circular balanced repeated measurement designs in periods of three different sizes

Abstract

Repeated measurement designs are widely used in medicine, pharmacology, animal sciences and psychology. If there is a restriction on the total number of treatments, some experimental units can receive on the total length of time while some experimental units can remain in the trial, then repeated measurements designs with unequal period sizes should be used. In this article, some infinite series are developed to generate the minimal balanced repeated measurement designs in periods of three different sizes p₁, p₂ and p₃, where 2?≤?p₃?<?p₂ ≤ 10 and p₂?<?p₁.     

Construction of repeated measurements designs strongly balanced for residual effects

Abstract

Repeated Measurements Designs have been widely used in agriculture, animal husbandry, education, biology, botany and engineering. Balanced or strongly balanced repeated measurements designs are useful to balance out the residual effects. In this article, some new generators and construction procedures are proposed to obtain circular strongly balanced repeated measurements designs in periods of (a) equal sizes, (b) two different sizes, and (c) three different sizes.     

Designs balanced for neighbor effects in circular blocks of size six

The performance of a treatment is affected by the treatments applied to its adjacent plots, especially in the experiments of agriculture, horticulture, forestry, serology and industry. Neighbor designs ensure that treatment comparisons are least affected by neighbor effects, therefore, this is a rich field of investigation in statistics and in combinatorics. In this article, several series of neighbor balanced designs are considered in circular blocks of six units.     

Balanced and partially balanced incomplete block designs with autocorrelation errors

The paper aims to find variance balanced and variance partially balanced incomplete block designs when observations within blocks are autocorrelated and we call them BIBAC and PBIBAC designs. Orthogonal arrays of type I and type II when used as BIBAC designs have smaller average variance of elementary contrasts of treatment effects compared to the corresponding Balanced Incomplete Block (BIB) designs with homoscedastic, uncorrelated errors. The relative efficiency of BIB designs compared to BIBAC designs depends on the block size k and the autocorrelation ρ and is independent of the number of treatments. Further this relative efficiency increases with increasing k. Partially balanced incomplete block designs with autocorrelated errors are introduced using partially balanced incomplete block designs and orthogonal arrays of type I and type II.     

Some new constructions of circular balanced repeated measurements designs

Repeated measurements designs are widely used in medicine, pharmacology, animal sciences, and psychology. In this article, some infinite series are developed to generate the balanced repeated measurements designs for p (periods) even. For p odd, construction procedures are also described. Catalogues of the proposed designs are also presented for p = 5, 7, 9, when v ≤ 100.