Variable selection in heteroscedastic single-index quantile regression

We propose a new algorithm for simultaneous variable selection and parameter estimation for the single-index quantile regression (SIQR) model . The proposed algorithm, which is non iterative , consists of two steps. Step 1 performs an initial variable selection method. Step 2 uses the results of Step 1 to obtain better estimation of the conditional quantiles and , using them, to perform simultaneous variable selection and estimation of the parametric component of the SIQR model. It is shown that the initial variable selection method consistently estimates the relevant variables , and the estimated parametric component derived in Step 2 satisfies the oracle property.     

Variable selection in finite mixture of semi-parametric regression models

Abstract

In this paper we are concerned with variable selection in finite mixture of semiparametric regression models. This task consists of model selection for non parametric component and variable selection for parametric part. Thus, we encountered separate model selections for every non parametric component of each sub model. To overcome this computational burden, we introduced a class of variable selection procedures for finite mixture of semiparametric regression models using penalized approach for variable selection. It is shown that the new method is consistent for variable selection. Simulations show that the performance of proposed method is good, and it consequently improves pervious works in this area and also requires much less computing power than existing methods.     

Component selection in additive quantile regression models

Nonparametric additive models are powerful techniques for multivariate data analysis. Although many procedures have been developed for estimating additive components both in mean regression and quantile regression, the problem of selecting relevant components has not been addressed much especially in quantile regression. We present a doubly-penalized estimation procedure for component selection in additive quantile regression models that combines basis function approximation with a ridge-type penalty and a variant of the smoothly clipped absolute deviation penalty. We show that the proposed estimator identifies relevant and irrelevant components consistently and achieves the nonparametric optimal rate of convergence for the relevant components. We also provide an accurate and efficient computation algorithm to implement the estimator and demonstrate its performance through simulation studies. Finally, we illustrate our method via a real data example to identify important body measurements to predict percentage of body fat of an individual.     

Bayesian LASSO-Regularized quantile regression for linear regression models with autoregressive errors

Quantile regression (QR) is a natural alternative for depicting the impact of covariates on the conditional distributions of a outcome variable instead of the mean. In this paper, we investigate Bayesian regularized QR for the linear models with autoregressive errors. LASSO-penalized type priors are forced on regression coefficients and autoregressive parameters of the model. Gibbs sampler algorithm is employed to draw the full posterior distributions of unknown parameters. Finally, the proposed procedures are illustrated by some simulation studies and applied to a real data analysis of the electricity consumption.     

Adaptive LASSO for linear regression models with ARMA-GARCH errors

The linear regression models with the autoregressive moving average (ARMA) errors (REGARMA models) are often considered, in order to reflect a serial correlation among observations. In this article, we focus on an adaptive least absolute shrinkage and selection operator (LASSO) (ALASSO) method for the variable selection of the REGARMA models and extend it to the linear regression models with the ARMA-generalized autoregressive conditional heteroskedasticity (ARMA-GARCH) errors (REGARMA-GARCH models). This attempt is an extension of the existing ALASSO method for the linear regression models with the AR errors (REGAR models) proposed by Wang et al. in 2007 Wang, H., Li, G., Tsai, C. (2007). Regression coefficient and autoregressive order shrinkage and selection via the lasso. Journal of the Royal Statistical Society: Series B 69:63–78. [Google Scholar]. New ALASSO algorithms are proposed to determine important predictors for the REGARMA and REGARMA-GARCH models. Finally, we provide the simulation results and real data analysis to illustrate our findings.     

Variable selection in finite mixture of regression models using the skew-normal distribution

Variable selection in finite mixture of regression (FMR) models is frequently used in statistical modeling. The majority of applications of variable selection in FMR models use a normal distribution for regression error. Such assumptions are unsuitable for a set of data containing a group or groups of observations with asymmetric behavior. In this paper, we introduce a variable selection procedure for FMR models using the skew-normal distribution. With appropriate choice of the tuning parameters, we establish the theoretical properties of our procedure, including consistency in variable selection and the oracle property in estimation. To estimate the parameters of the model, a modified EM algorithm for numerical computations is developed. The methodology is illustrated through numerical experiments and a real data example.     

Variable selection in additive quantile regression using nonconcave penalty

This paper considers variable selection in additive quantile regression based on group smoothly clipped absolute deviation (gSCAD) penalty. Although shrinkage variable selection in additive models with least-squares loss has been well studied, quantile regression is sufficiently different from mean regression to deserve a separate treatment. It is shown that the gSCAD estimator can correctly identify the significant components and at the same time maintain the usual convergence rates in estimation. Simulation studies are used to illustrate our method.     

Estimation and variable selection in single-index composite quantile regression

In this article, a new composite quantile regression estimation approach is proposed for estimating the parametric part of single-index model. We use local linear composite quantile regression (CQR) for estimating the nonparametric part of single-index model (SIM) when the error distribution is symmetrical. The weighted local linear CQR is proposed for estimating the nonparametric part of SIM when the error distribution is asymmetrical. Moreover, a new variable selection procedure is proposed for SIM. Under some regularity conditions, we establish the large sample properties of the proposed estimators. Simulation studies and a real data analysis are presented to illustrate the behavior of the proposed estimators.     

Variable selection and weighted composite quantile estimation of regression parameters with left-truncated data

In this paper, we consider the weighted composite quantile regression for linear model with left-truncated data. The adaptive penalized procedure for variable selection is proposed. The asymptotic normality and oracle property of the resulting estimators are also established. Simulation studies are conducted to illustrate the finite sample performance of the proposed methods.     

Model selection in quantile regression models

Lasso methods are regularisation and shrinkage methods widely used for subset selection and estimation in regression problems. From a Bayesian perspective, the Lasso-type estimate can be viewed as a Bayesian posterior mode when specifying independent Laplace prior distributions for the coefficients of independent variables [32 T. Park, G. Casella, The Bayesian Lasso, J. Amer. Statist. Assoc. 103 (2008), pp. 681–686. doi: 10.1198/016214508000000337[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]]. A scale mixture of normal priors can also provide an adaptive regularisation method and represents an alternative model to the Bayesian Lasso-type model. In this paper, we assign a normal prior with mean zero and unknown variance for each quantile coefficient of independent variable. Then, a simple Markov Chain Monte Carlo-based computation technique is developed for quantile regression (QReg) models, including continuous, binary and left-censored outcomes. Based on the proposed prior, we propose a criterion for model selection in QReg models. The proposed criterion can be applied to classical least-squares, classical QReg, classical Tobit QReg and many others. For example, the proposed criterion can be applied to rq(), lm() and crq() which is available in an R package called Brq. Through simulation studies and analysis of a prostate cancer data set, we assess the performance of the proposed methods. The simulation studies and the prostate cancer data set analysis confirm that our methods perform well, compared with other approaches.     

Weighted composite quantile regression for partially linear varying coefficient models

Partially linear varying coefficient models (PLVCMs) with heteroscedasticity are considered in this article. Based on composite quantile regression, we develop a weighted composite quantile regression (WCQR) to estimate the non parametric varying coefficient functions and the parametric regression coefficients. The WCQR is augmented using a data-driven weighting scheme. Moreover, the asymptotic normality of proposed estimators for both the parametric and non parametric parts are studied explicitly. In addition, by comparing the asymptotic relative efficiency theoretically and numerically, WCQR method all outperforms the CQR method and some other estimate methods. To achieve sparsity with high-dimensional covariates, we develop a variable selection procedure to select significant parametric components for the PLVCM and prove the method possessing the oracle property. Both simulations and data analysis are conducted to illustrate the finite-sample performance of the proposed methods.     

Variable selection in quantile regression via Gibbs sampling

Due to computational challenges and non-availability of conjugate prior distributions, Bayesian variable selection in quantile regression models is often a difficult task. In this paper, we address these two issues for quantile regression models. In particular, we develop an informative stochastic search variable selection (ISSVS) for quantile regression models that introduces an informative prior distribution. We adopt prior structures which incorporate historical data into the current data by quantifying them with a suitable prior distribution on the model parameters. This allows ISSVS to search more efficiently in the model space and choose the more likely models. In addition, a Gibbs sampler is derived to facilitate the computation of the posterior probabilities. A major advantage of ISSVS is that it avoids instability in the posterior estimates for the Gibbs sampler as well as convergence problems that may arise from choosing vague priors. Finally, the proposed methods are illustrated with both simulation and real data.     

Sparsity identification in ultra-high dimensional quantile regression models with longitudinal data

Abstract

In this paper, we propose a variable selection method for quantile regression model in ultra-high dimensional longitudinal data called as the weighted adaptive robust lasso (WAR-Lasso) which is double-robustness. We derive the consistency and the model selection oracle property of WAR-Lasso. Simulation studies show the double-robustness of WAR-Lasso in both cases of heavy-tailed distribution of the errors and the heavy contaminations of the covariates. WAR-Lasso outperform other methods such as SCAD and etc. A real data analysis is carried out. It shows that WAR-Lasso tends to select fewer variables and the estimated coefficients are in line with economic significance.     

Variable selection for mode regression

From the prediction viewpoint, mode regression is more attractive since it pay attention to the most probable value of response variable given regressors. On the other hand, high-dimensional data are very prevalent as the advance of the technology of collecting and storing data. Variable selection is an important strategy to deal with high-dimensional regression problem. This paper aims to propose a variable selection procedure for high-dimensional mode regression via combining nonparametric kernel estimation method with sparsity penalty tactics. We also establish the asymptotic properties under certain technical conditions. The effectiveness and flexibility of the proposed methods are further illustrated by numerical studies and the real data application.     

Penalized weighted composite quantile regression in the linear regression model with heavy-tailed autocorrelated errors

In this paper, a penalized weighted composite quantile regression estimation procedure is proposed to estimate unknown regression parameters and autoregression coefficients in the linear regression model with heavy-tailed autoregressive errors. Under some conditions, we show that the proposed estimator possesses the oracle properties. In addition, we introduce an iterative algorithm to achieve the proposed optimization problem, and use a data-driven method to choose the tuning parameters. Simulation studies demonstrate that the proposed new estimation method is robust and works much better than the least squares based method when there are outliers in the dataset or the autoregressive error distribution follows heavy-tailed distributions. Moreover, the proposed estimator works comparably to the least squares based estimator when there are no outliers and the error is normal. Finally, we apply the proposed methodology to analyze the electricity demand dataset.     

Variable screening for ultrahigh dimensional censored quantile regression

Quantile regression is a flexible approach to assessing covariate effects on failure time, which has attracted considerable interest in survival analysis. When the dimension of covariates is much larger than the sample size, feature screening and variable selection become extremely important and indispensable. In this article, we introduce a new feature screening method for ultrahigh dimensional censored quantile regression. The proposed method can work for a general class of survival models, allow for heterogeneity of data and enjoy desirable properties including the sure screening property and the ranking consistency property. Moreover, an iterative version of screening algorithm has also been proposed to accommodate more complex situations. Monte Carlo simulation studies are designed to evaluate the finite sample performance under different model settings. We also illustrate the proposed methods through an empirical analysis.     

A new model selection procedure based on dynamic quantile regression

In this article, we propose a novel robust data-analytic procedure, dynamic quantile regression (DQR), for model selection. It is robust in the sense that it can simultaneously estimate the coefficients and the distribution of errors over a large collection of error distributions even those that are heavy-tailed and may not even possess variances or means; and DQR is easy to implement in the sense that it does not need to decide in advance which quantile(s) should be gathered. Asymptotic properties of related estimators are derived. Simulations and illustrative real examples are also given.     

Adaptive elastic net-penalized quantile regression for variable selection

Abstract

There has been much attention on the high-dimensional linear regression models, which means the number of observations is much less than that of covariates. Considering the fact that the high dimensionality often induces the collinearity problem, in this article, we study the penalized quantile regression with the elastic net (EnetQR) that combines the strengths of the quadratic regularization and the lasso shrinkage. We investigate the weak oracle property of the EnetQR under mild conditions in the high dimensional setting. Moreover, we propose a two-step procedure, called adaptive elastic net quantile regression (AEnetQR), in which the weight vector in the second step is constructed from the EnetQR estimate in the first step. This two-step procedure is justified theoretically to possess the weak oracle property. The finite sample properties are performed through the Monte Carlo simulation and a real-data analysis.