Testing for parameter constancy in the time series direction in panel data models

We propose tests for parameter constancy in the time series direction in panel data models. We construct a locally best invariant test based on Tanaka [Time series analysis: nonstationary and noninvertible distribution theory. New York: Wiley; 1996] and an asymptotically point optimal test based on Elliott and Müller [Efficient tests for general persistent time variation in regression coefficients. Rev Econ Stud. 2006;73:907–940]. We derive the limiting distributions of the test statistics as T→∞ while N is fixed, and calculate the critical values by applying numerical integration and response surface regression. Simulation results show that the proposed tests perform well if we apply them appropriately.     

Default Bayesian goodness-of-fit tests for the skew-normal model

In this paper we propose a series of goodness-of-fit tests for the family of skew-normal models when all parameters are unknown. As the null distributions of the considered test statistics depend only on asymmetry parameter, we used a default and proper prior on skewness parameter leading to the prior predictive p-value advocated by G. Box. Goodness-of-fit tests, here proposed, depend only on sample size and exhibit full agreement between nominal and actual size. They also have good power against local alternative models which also account for asymmetry in the data.     

Testing homogeneity of control and treatment populations — local optimality and related issues

Durairajan and Raman (1996 a, b) studied the robustness of Locally most powerful invariant (LMPI) tests for compound normal model in control and treatment populations. In the present paper, the Locally most powerful (LMP) tests are constructed for no contamination in normal mixture model through testing the parameter of mixture of distributions and the mixing proportion. The expected performance of LMP tests are compared using Efron's Statistical Curvature on the lines of Sen Gupta and Pal (1991). The Locally most powerful similar (LMPS) tests for the equality of control and treatment populations in the presence of nuisance parameters are also constructed. Further, the null and non-null distributions of the test statistics are derived and some power computations are made. Received: September 1, 1999; revised version: August 31, 2000     

Pareto analysis based on records

Estimation of the parameters of an exponential distribution based on record data has been treated by Samaniego and Whitaker [On estimating population characteristics from record-breaking observations, I. Parametric results, Naval Res. Logist. Q. 33 (1986), pp. 531–543] and Doostparast [A note on estimation based on record data, Metrika 69 (2009), pp. 69–80]. Recently, Doostparast and Balakrishnan [Optimal record-based statistical procedures for the two-parameter exponential distribution, J. Statist. Comput. Simul. 81(12) (2011), pp. 2003–2019] obtained optimal confidence intervals as well as uniformly most powerful tests for one- and two-sided hypotheses concerning location and scale parameters based on record data from a two-parameter exponential model. In this paper, we derive optimal statistical procedures including point and interval estimation as well as most powerful tests based on record data from a two-parameter Pareto model. For illustrative purpose, a data set on annual wages of a sample of production-line workers in a large industrial firm is analysed using the proposed procedures.     

Approximations to the p-values of tests for a change-point under non-standard conditions

Three test statistics for a change-point in a linear model, variants of those considered by Andrews and Ploberger [Optimal tests when a nusiance parameter is present only under the alternative. Econometrica. 1994;62:1383–1414]: the sup-likelihood ratio (LR) statistic; a weighted average of the exponential of LR-statistics and a weighted average of LR-statistics, are studied. Critical values for the statistics with time trend regressors, obtained via simulation, are found to vary considerably, depending on conditions on the error terms. The performance of the bootstrap in approximating p-values of the distributions is assessed in a simulation study. A sample approximation to asymptotic analytical expressions extending those of Kim and Siegmund [The likelihood ratio test for a change-point in simple linear regression. Biometrika. 1989;76:409–423] in the case of the sup-LR test is also assessed. The approximations and bootstrap are applied to the Quandt data [The estimation of a parameter of a linear regression system obeying two separate regimes. J Amer Statist Assoc. 1958;53:873–880] and real data concerning a change-point in oxygen uptake during incremental exercise testing and the bootstrap gives reasonable results.     

Performance of the shrinkage preliminary test ridge regression estimators based on the conflicting of W,LR and LM tests

The shrinkage preliminary test ridge regression estimators (SPTRRE) based on the Wald (W), the likelihood ratio (LR) and the Lagrangian multiplier (LM) tests are considered in this paper. The bias and the risk functions of the proposed estimators are derived. The regions of optimality of the estimators are determined under the quadratic risk function. Under the null hypothesis, the SPTRRE based on LM test has the smallest risk, followed by the estimators based on LR and W tests. However, the SPTRRE based on W test performs the best followed by the LR and LM based estimators when the parameter moves away from the subspace of the restrictions. The conditions of superiority of the proposed estimator for both ridge and departure parameters are discussed. The optimum choice of the level of significance becomes the traditional choice by using the W test for all non-negative ridge parameters.     

Nonparametric predictive inference for diagnostic test thresholds

Abstract

Measuring the accuracy of diagnostic tests is crucial in many application areas including medicine, machine learning and credit scoring. The receiver operating characteristic (ROC) curve and surface are useful tools to assess the ability of diagnostic tests to discriminate between ordered classes or groups. To define these diagnostic tests, selecting the optimal thresholds that maximize the accuracy of these tests is required. One procedure that is commonly used to find the optimal thresholds is by maximizing what is known as Youden’s index. This article presents nonparametric predictive inference (NPI) for selecting the optimal thresholds of a diagnostic test. NPI is a frequentist statistical method that is explicitly aimed at using few modeling assumptions, enabled through the use of lower and upper probabilities to quantify uncertainty. Based on multiple future observations, the NPI approach is presented for selecting the optimal thresholds for two-group and three-group scenarios. In addition, a pairwise approach has also been presented for the three-group scenario. The article ends with an example to illustrate the proposed methods and a simulation study of the predictive performance of the proposed methods along with some classical methods such as Youden index. The NPI-based methods show some interesting results that overcome some of the issues concerning the predictive performance of Youden’s index.     

Tests for homogeneity of extreme value scale parameters

It is often assumed in situations in which life data from Weibull or extreme-value distributions are involved that data in different samples come from extreme-value distributions with the same scale parameter (equivalently, Weibull distributions with the same shape parameter). This paper proposes a number of tests for homogeneity for extreme-value scale parameters, based on a number of commonly used estimators for these scale parameters. Previous theoretical work and some simulation results provided here indicate that the null distributions of the test statistics proposed are well approximated by the x2 distribution under a wide range of conditions     

Optimal design of accelerated degradation tests based on Wiener process models

Optimal accelerated degradation test (ADT) plans are developed assuming that the constant-stress loading method is employed and the degradation characteristic follows a Wiener process. Unlike the previous works on planning ADTs based on stochastic process models, this article determines the test stress levels and the proportion of test units allocated to each stress level such that the asymptotic variance of the maximum-likelihood estimator of the qth quantile of the lifetime distribution at the use condition is minimized. In addition, compromise plans are also developed for checking the validity of the relationship between the model parameters and the stress variable. Finally, using an example, sensitivity analysis procedures are presented for evaluating the robustness of optimal and compromise plans against the uncertainty in the pre-estimated parameter value, and the importance of optimally determining test stress levels and the proportion of units allocated to each stress level are illustrated.     

Forecasting Macroeconomic Variables Under Model Instability

We compare different approaches to accounting for parameter instability in the context of macroeconomic forecasting models that assume either small, frequent changes versus models whose parameters exhibit large, rare changes. An empirical out-of-sample forecasting exercise for U.S. gross domestic product (GDP) growth and inflation suggests that models that allow for parameter instability generate more accurate density forecasts than constant-parameter models although they fail to produce better point forecasts. Model combinations deliver similar gains in predictive performance although they fail to improve on the predictive accuracy of the single best model, which is a specification that allows for time-varying parameters and stochastic volatility. Supplementary materials for this article are available online.     

On optimal tests for general interval-hypotheses

Optimal statistical tests, using the normality assumptions for general interval hypotheses including equivalence testing and testing for nonzero difference (or for non-unit) are presented. These tests are based on the decision theory for Polya Type distributions and are compared with usual confidence tests and with ’two one-sided tests’- procedures. A formal relationship between some optimal tests and the Anderson and Hauck procedure as well as a procedure recommended by Patel and Gupta is given. A new procedure for a generalisation of Student's test as well as for equivalence testing for thet-statistics is shown.     

Designing a Degradation Test with a Two-Parameter Exponential Lifetime Distribution

Degradation testing (DT) is a useful approach to assessing the reliability of highly reliable products which are not likely to fail under the traditional life tests or accelerated life tests. There have been a great number of excellent studies investigating the estimation of the failure time distribution and the optimal design (e.g., the optimal setting of the inspection frequency, the number of measurement, and the termination time) for DTs. However, the lifetime distributions considered in the studies mentioned above are all those without failure-free life. Here, failure-free life is characterized by a threshold parameter below which no failure is possible. The main purpose of this article is to deal with the optimal design of a DT with a two-parameter exponential lifetime distribution. More specifically, with respect to a DT where a linearized degradation model is used to model the degradation process and the lifetime is assumed to follow a two-parameter exponential distribution, under the constraint that the total experimental cost does not exceed a predetermined budget, the optimal combination of the inspection frequency, the sample size, and the termination time are determined by minimizing the mean squared error of the estimated 100p-th percentile of the lifetime distribution of the product. An example is provided to illustrate the proposed method and the corresponding sensitivity analysis is also discussed.     

One-sample location tests for multilevel data

In this paper, we consider testing the location parameter with multilevel (or hierarchical) data. A general family of weighted test statistics is introduced. This family includes extensions to the case of multilevel data of familiar procedures like the t, the sign and the Wilcoxon signed-rank tests. Under mild assumptions, the test statistics have a null limiting normal distribution which facilitates their use. An investigation of the relative merits of selected members of the family of tests is achieved theoretically by deriving their asymptotic relative efficiency (ARE) and empirically via a simulation study. It is shown that the performance of a test depends on the clusters configurations and on the intracluster correlations. Explicit formulas for optimal weights and a discussion of the impact of omitting a level are provided for 2 and 3-level data. It is shown that using appropriate weights can greatly improve the performance of the tests. Finally, the use of the new tests is illustrated with a real data example.     

Two-sample spatial rank test using projection

This paper explores in high-dimensional settings how to test the equality of two location vectors. We introduce a rank-based projection test under elliptical symmetry. Optimal projection direction is derived according to asymptotically and locally best power criteria. Data-splitting strategy is used to estimate optimal projection and construct test statistics. The limiting null distribution and power function of the proposed statistics are thoroughly investigated under some mild assumptions. The test is shown to keep type I error rates pretty well and outperforms several existing methods in a broad range of settings, especially in the presence of large correlation structures. Simulation studies are conducted to confirm the asymptotic results and a real data example is applied to demonstrate the advantage of the proposed procedure.     

Ratio tests of a unit root

Based on the maximal invariant principle, we derive two ratio tests (locally best invariant test and point optimal test) for a unit root and compare them with previously proposed ratio tests. We also show that our ratio tests tend to have better powers than the Dickey-Fuller test and the modified Dickey-Fuller test.     

Preliminary test Liu-type estimators based on W,LR, and LM test statistics in a regression model

This article discusses the preliminary test approach for the regression parameter in multiple regression model. The preliminary test Liu-type estimators based on the Wald (W), Likelihood ratio (LR), and Lagrangian multiplier(LM) tests are presented, when it is supposed that the regression parameter may be restricted to a subspace. We also give the bias and mean squared error of the proposed estimators and the superior of the proposed estimators is also discussed.     

The Use of Permutation Tests for Variance Components in Linear Mixed Models

Standard asymptotic chi-square distribution of the likelihood ratio and score statistics under the null hypothesis does not hold when the parameter value is on the boundary of the parameter space. In mixed models it is of interest to test for a zero random effect variance component. Some available tests for the variance component are reviewed and a new test within the permutation framework is presented. The power and significance level of the different tests are investigated by means of a Monte Carlo simulation study. The proposed test has a significance level closer to the nominal one and it is more powerful.     

A GEE approach to estimating accuracy and its confidence intervals for correlated data

In this paper, we provide a method for constructing confidence interval for accuracy in correlated observations, where one sample of patients is being rated by two or more diagnostic tests. Confidence intervals for other measures of diagnostic tests, such as sensitivity, specificity, positive predictive value, and negative predictive value, have already been developed for clustered or correlated observations using the generalized estimating equations (GEE) method. Here, we use the GEE and delta‐method to construct confidence intervals for accuracy, the proportion of patients who are correctly classified. Simulation results verify that the estimated confidence intervals exhibit consistent/appropriate coverage rates.     

Preliminary Test Estimators Induced by Three Large Sample Tests for Stochastic Constraints in a Regression Model with Multivariate Student-t Error

In this article, we consider the preliminary test approach to the estimation of the regression parameter in a multiple regression model with multivariate Student-t distribution. The preliminary test estimators (PTE) based on the Wald (W), Likelihood Ratio (LR), and Lagrangian Multiplier (LM) tests are given under the suspicion of stochastic constraints occurring. The bias, mean square error matr ix (MSEM), and weighted mean square error (WMSE) of the proposed estimators are derived and compared. The conditions of superiority of the proposed estimators are obtained. Finally, we conclude that the optimum choice of the level of significance becomes the traditional choice by using the W test.