The relative importance of planning and control systems in achieving good delivery performance

Amongst factors such as quick changeovers and workforce flexibility, managers in 533 UK manufacturing plants ranked a responsive planning and control system as the most important facilitator of good delivery performance on products made-to-order or assembled-to-order. The rankings indicate greater importance to companies in the Household and Engineering sectors than in Process and Electronics, where other factors are dominant. These results are combined with data such as customer lead times and item variety, to characterize and explain differences between the plants in these four sectors. Collectively the results indicate considerable differences in the production planning and control tasks. This implies that general statements on the importance of planning and control systems are inadequate. Practitioners need contextual information in order to ascertain when research is applicable to their circumstances.     

Selection and implementation of a PPC system

There are many computer-aided production planning and control (PPC) systems available on the market which can provide a solution to the complex task of production planning and control. However, the question remains, how can a company find an optimal system from the vast amount of available systems? This article proposes that a company, having decided to buy one of the available systems, starts a project for selection and implementation of the PPC system.     

Simple systems for computer-aided production management

Future production concepts where workshop employees responsibly carry through planning and scheduling tasks call for new principles ofcomputer-aided production management (CAPM). With the aid of a critical analysis ofdifferent planning and scheduling mechanisms it will first be laid down why the field of computer-aided production management is suited for a dialogue-oriented planning support based on simple models rather than for the objective of automation with the aid of refined optimization algorithms. Consequently, an alternative design is proposed. This is a prototypically realized concept aiming at computer-aided support of production management of production teams.     

Production planning and control tools

There are numerous tools available to be used for production planning and control purposes. The number of tools is ever increasing, and so are the levels of sophistication as well as complexity. For the specific manufacturing firm, the task of selecting the most appropriate set of tools is not trivial. However, in recent years, the understanding of the relationship between tools and manufacturing environments for which they are suitable has increased. The purpose of this paper is to provide an overview of production planning and control tools available today, as well as new trends, issues and ideas.     

Genetic algorithm to production planning and scheduling problems for manufacturing systems

Fundamental and extended multi-objective (MO) models are designed to address earliness/tardiness production scheduling planning (ETPSP) problems with multi-process capacity balance, multi-product production and lot-size consideration. A canonical genetic algorithm (GA) approach and a prospective multi-objective GA (MOGA) approach are proposed as solutions for different practical problems. Simulation results as well as comparisons with other techniques demonstrate the effectiveness of the MOGA approach, which is a noted improvement to any of the existing techniques, and also in practice provides a new trend of integrating manufacturing resource planning (MRPII) with just-in-time (JIT) in the production planning procedure.     

A framework for production control in health care organizations

The paper presents a hierarchical framework for production control of hospitals which deals with the balance between service and efficiency, at all levels of planning and control. The framework is based on an analysis of the design requirements for hospital production control systems. These design requirements are translated into the control functions at different levels of planning required for hospital production control. The framework consists of five levels of planning and control: patient planning and control, patient group planning and control, resources planning and control, patient volumes planning and control and strategic planning, though this last level does not make part of production control as such. Each of the levels of the framework is further elaborated in terms of the decisions made regarding patient flows and resources, and the co-ordination of the different planning levels. Implications of the framework are discussed by describing some points where current practice deviates from assumptions made in our approach. Recommendations for future research and development of the planning framework are formulated.     

Real-time scheduling and control of one-of-a kind production

Due to the great diversity of product types in one-of-a-kind production (OKP), the production scheduling and control in OKP is much more difficult than production scheduling and control of other production systems, e.g. mass production and batch production. Hence, the production efficiency in OKP companies is relatively lower. To improve productivity in OKP, a dynamic hierarchy production control system is presented. Using this control structure, a production system in an OKP company can be flexibly organized or re-organized according to the structure of a customized product (or an OKP product). Production synchronizing and scheduling algorithms for OKP shop floor production control are presented. Using these algorithms, a cybernetic model can be developed for shop floor control in OKP. The algorithms are applied to two alternate production scheduling goals in OKP, namely ASAP (as soon as possible) production and JIT (just in time) production.     

Development of an integrated information management model: A case of textile industry

For past two decades many organisations have tried to implement integrated information management systems for better production management based on co-ordination of information and therefore activities of different departments. Although Enterprise Resource Planning systems have been in the market for the past decade, many industries find it difficult to implement such systems due to the amount of work involved in streamlining the documentation, customisation and of high costs reported in implementation. An attempt is made through this paper to propose an integrated model, which can be easily understood by production personnel, with specific emphasis on the textile sector.     

A neural network clustering model for miscellaneous components production planning

The growing importance of providing service to customers, e.g. post-sale assistance, supplying of spare parts, upgrading and integration of new elements in installed systems, enhances the importance of planning and management of upgrading parts in most manufacturing industries. These parts are generally characterized by high technical heterogeneity and have a highly variable and difficult to forecast demand. In some areas (especially the most dynamic, e.g. high-tech products), these kinds of components are quite common, and represent a very strong relation between the manufacturing firm and the market. These parts are generally too many to be efectively supported on a planning database system with individual records and too heterogeneous ( and sometimes with a too high value) to be supported all together in a single record. In this paper, we want to study the application of adaptive techniques for the clustering of these components in classes based on the similarities in their market behaviour in order to build an optimal database for planning production and supplying of these components.     

Decision support systems for production scheduling tasks- Part I of a case study: Analysis and task redesign

The first three steps of a new design method for decision support systems in production scheduling tasks are applied to a large bulk terminal. The operational characteristics of the company largely correspond with those of typical semiprocess industries. The design model used consists of five steps: production analysis, task analysis, task redesign, decision support design and decision support implementation. The results of the application of the design model up to the task redesign step are described.     

Experimental earliness/tardiness production planning with the due window system

In order to use the philosophy of JIT to improve the production planning method of MRP-II, we propose the experimental software system of the earliness/tardiness produc tion planning problem with due window. By means of the approaches and model reported in this paper, the optimal production planning can be achieved. The recommended model extends the problem of due window from the shop scheduling level into the aggregated planning level of mass manufacturing systems. Simulation results have demonstrated that the experimental software is a useful tool for the production management of repetitive manufacturing enterprises.     

Multi-site aggregate production planning with multiple objectives: A goal programming approach

This paper addresses the problem of aggregate production planning (APP) for a multinational lingerie company in Hong Kong. The multi-site production planning problem considers the production loading plans among manufacturing factories subject to certain restrictions, such as production import/export quotas imposed by regulatory requirements of different nations, the use of manufacturing factories/locations with regard to customers' preferences, as well as production capacity, workforce level, storage space and resource conditions of the factories. In this paper, a multi-objective model is developed to solve the production planning problems, in which the profit is maximized but production penalties resulting from going over/under quotas and the change in workforce level are minimized. To enhance the practical implications of the proposed model, different managerial production loading plans are evaluated according to changes in future policy and situation. Numerical results demonstrate the robustness and effectiveness of the developed model.     

A general approach to disassembly planning and control

Closing product and material cycles have emerged as a paradigm for industry in the 21st century, and are directed towards an economical and responsible use of our limited resources. Disassembly plays a key role in recycling. It enables the recovery of functioning components for re-use of pure materials for re-utilization and the separation of harmful substances. Major challenges are presented by the enormous variety of products to be disassembled, by uncertainty as to quantity and by their unknown properties. An appropriate planning and control of disassembly processes is essential for an economic disassembly. Based on an investigation of the suitability of common production planning and control (PPC) methods for disassembly, a specific disassembly planning and control concept (DPC) is outlined.     

User Perceptions of Decision Support Effectiveness: Two Production Planning Experiments*

Decision support systems continue to be very popular in business, despite mixed research evidence as to their effectiveness. We hypothesize that what-if analysis, a prominent feature of most decision support systems, creates an “illusion of control” causing users to overestimate its effectiveness. Two experiments involving a production planning task are reported which examine decision makers' perceptions of the effectiveness of what-if analysis relative to the alternatives of unaided decision making, and quantitative decision rules. Experiment 1 found that almost all subjects believed what-if analysis was superior to unaided decision making, although using what-if analysis had no significant effect on performance. Experiment 2 found that decision makers were indifferent between what-if analysis and a quantitative decision rule which, if used, would have led to significant cost savings. Thus, what-if analysis did create an illusion of control: decision makers perceived performance differences where none existed, and did not detect large differences when they were present. In both experiments, decision makers exhibited difficulty realizing that their positive beliefs about what-if analysis were exaggerated. Such misjudgments could lead people to continue using what-if analysis even when it is not beneficial and to avoid potentially superior decision support technologies.     

Flexible reasoning using sensible agent-based systems: A case study in job flow scheduling

Planning and control systems for highly dynamic and uncertain manufacturing environments require adaptive flexibility and decision-making capabilities. Modern distributed manufacturing systems assess the utility of planning and executing solutions for both system goals (e.g. minimize manufacturing production time for all parts or minimize WIP) and local goals (e.g. expedite part A production schedule or maximize machine X utilization). Sensible Agents have the ability to alter their autonomy levels to choose among a set of decision models in order to handle the differences between local and system goals. In this paper, Sensible Agents are applied to a production planning and control problem in the context of job shop scheduling and decision model theory. Sensible Agents provide for trade-off reasoning mechanisms among system and local utilities that are flexible and responsive to an agent's abilities, situational context and position in the organizational structure of the system.     

An icon-based data image construction method for production data visualization

Visualization takes advantage of human's rapid and flexible pattern recognition capacity to provide a powerful information-processing environment. It is especially suitable for identifying patterns that are difficult, or impossible, to be defined by a mathematical or computer model. This paper presents an icon-based method for constructing images to visualize the abstract, multidimensional production data stored in tables. The method employs a simple, topology-preserving mapping to convert numbers in a table to icons. This mapping strategy not only makes the meaning of the resulted data image easy to understand, but also makes the maximum number of dimensions and data items that could be displayed be virtually unlimited. Visual patterns in the data image are formed by adjacent icons that have similar grey scales. The area sampling techniques could be applied to reduce the size of the data image while still retaining its visual patterns. The proposed visualization method has been applied to several production planning and control activities, including analysing WIP patterns, production indices, and the machine idle cost performance of production plans. These industrial case studies demonstrate that the ability to quickly and easily examine large amount of manufacturing data through visualization is critical for manufacturing companies to understand their performance, discover possible problems and take necessary actions so that they could remain competitive in the market.     

Design requirements for health care production control systems

This paper addresses the issue of determining design requirements for production control in health care organizations, with a restriction to the internal production control of hospitals. Hospital management has limited possibilities to control hospital production, as hospital production processes are driven by medical specialists who, however, do not manage that process. We consider therefore the hospital as a virtual organization, consisting of a number of relatively independent businesses in a common framework. Each business unit functions as a focused factory for a range of more or less homogeneous products. Production control principles can be applied to each of these businesses, but not to the system as a whole. A number of elements from classical production control theory can be also applied to health care, i.e. the use of decoupling points, the bottleneck-oriented approach, and the operational control between production and market. However, important factors that need to be considered in health production control are that often specifications on quality are not available at the start of the process, and that there is strong interaction between the patient and the process. Our conclusion is that a dedicated framework for approaching hospital production control is necessary. The specific characteristics of hospital care and its state of production control development are the main arguments for this dedicated framework.     

Resource-constrained materials requirements planning- MRP rc

Computerized MRP systems used in industrial practice have been criticized by researchers as well as industrial users with respect to their limited ability to generate feasible production schedules. In this paper the lot size planning stage of a typical MRP system is considered. Several modelling alternatives for multi-level lot sizing are discussed with the help of a small example. A resourceconstrained approach to lot sizing- called MRP rc- is presented that cooperates with standard production planning and control systems. In this approach the item-by-item lot size planning is substituted by the heuristic solution of a multi-level multi-item dynamic capacitated lot sizing problem with setup times for general product structures.     

Computational complexity of algorithms for MRP and JIT production planning problems in enterprise resource planning systems

An enterprise resource planning system (ERP) is the information backbone of many manufacturing companies. At the core of ERP is a conventional material requirements planning (MRP) production planning system or a variation of MRP when just-in-time (JIT) principles are used in manufacturing. MRP and JIT both organize production planning into a hierarchy of long-, medium- and short-range problems. In all there are eight different problems. Some are common to MRP and JIT, others are specialized for a particular system. This paper analyses the computational requirements of these problems. This is important for ERP because it plans for large numbers of products (e.g. 50 000 products at 3M Company and 44 000 products at States Industries in Oregon) at large numbers of locations (e.g. 82 locations in 21 countries for Visteon Automotive Systems of Michigan and 19 locations at Boeing). We show that adequate algorithms exist for some problems, but better algorithms are needed for other problems if ERP is to provide useful production plans.     

Simplest strategies method for manufacturing workcell restoration

We consider the production process of a manufacturing workcell. Production items obtained from an outside supplier are not processed adequately as far as their quality is concerned. Production items meeting the required quality depend on the workcell state, which degrades according to the number of produced items. The workcell is completely restored by some restoring operations leading to its as-new condition. The method of deriving the restoration period, which leads to the maximum probability that produced items meet the required quality, is introduced. It is based on the nontraditional approach, i.e. on the simplest strategies method for the formulation of the problem presented here. The implementation of this optimization approach is illustrated with an example.