Optimal statistical designs with circular string property

This paper develops an approximate theory for D- and A-optlmal statistical designs with a circular string property. It is shown how the problems of deriving optimal designs can be reduced to non-linear programming problems involving small numbers of decision variables. The results are seen to be helpful in dealing with the exact design problem with a finite number of obser vations.     

E- and R-optimality of block designs for treatment-control comparisons

Abstract

We study optimal block designs for comparing a set of test treatments with a control treatment. We provide the class of all E-optimal approximate block designs, which is characterized by simple linear constraints. Based on this characterization, we obtain a class of E-optimal exact designs for unequal block sizes. In the studied model, we provide a statistical interpretation for wide classes of E-optimal designs. Moreover, we show that all approximate A-optimal designs and a large class of A-optimal exact designs for treatment-control comparisons are also R-optimal. This reinforces the observation that A-optimal designs perform well even for rectangular confidence regions.     

Optimal Designs for Binary Logistic Regression with a Qualitative Classifier with Independent Levels

Dose response studies arise in many medical applications. Often, such studies are considered within the framework of binary-response experiments such as success-failure. In such cases, popular choices for modeling the probability of response are logistic or probit models. Design optimality has been well studied for the logistic model with a continuous covariate. A natural extension of the logistic model is to consider the presence of a qualitative classifier. In this work, we explore D-, A-, and E-optimal designs in a two-parameter, binary logistic regression model after introducing a binary, qualitative classifier with independent levels.     

D-optimal weighing designs and optimal chemical balance weighing designs for estimating the total weight

This paper provides D-optimal spring balance designs for estimating individual weights when the number of objects to be weighed in each weighing, B, is fixed. D-optimal chemical balance designs for estimating total weight under both homogeneous and nonhomogeneous error variances are found when the number of objects weighed in each weighing is ≥ B, a fixed number.

We indicate the restriction used in Chacko & Dey(1978) and Kageyama(1988), i.e. that chemical designs X be restricted to designs in which exactly “a” objects are replaced on the left pan and exactly “b” on the right pan in each of the weighings for a, b > 0, is unnecessary.     

D-optimal statistical designs with restricted string property

This paper applies Frechet derivatives to derive asymp-totically D-optimal statistical designs where the designmatrix is a (O,l)-matrix having exactly one run [of length at most k(, the number of parameters) of l's in each row. These asymptotic results have been utilized in dealing with the more intractable design problem with a finite number of observations. The problemof E-optimality has also been considered.     

Optimal designs for additive mixture model with heteroscedastic errors

This paper presents a study of D- and A-optimality of direct sum designs for additive mixture models when the errors are heteroscedastic. Sufficient conditions are given so that D- and A-optimal designs for additive mixture models can be constructed from the D- and A-optimal designs for homogeneous models in sub-mixture systems.     

Optimal orthogonal block designs for four-mixture components in two blocks based on F-squares for Becker's models and K-model

Orthogonal block designs in mixture experiments have been extensively studied by various authors. Aggarwal et al. [M.L. Aggarwal, P. Singh, V. Sarin, and B. Husain, Mixture designs in orthogonal blocks using F-squares, METRON – Int. J. Statist. LXVII(2) (2009), pp. 105–128] considered the case of components assuming the same volume fractions and obtained mixture designs in orthogonal blocks using F-squares. In this paper, we have used the class of designs presented by Aggarwal et al. and have obtained D-, A- and E-optimal orthogonal block designs for four components in two blocks for Becker's mixture models and K-model, respectively. Orthogonality conditions for the considered models are also given.     

Optimal designs for generalized linear models

Summary This paper solves some D-optimal design problems for certain Generalized Linear Models where the mean depends on two parameters and two explanatory variables. In all of the cases considered the support point of the optimal designs are found to be independent of the unknown parameters. While in some cases the optimal design measures are given by two points with equal weights, in others the support is given by three point with weights depending on the unknown parameters, hence the designs are locally optimal in general. Empirical results on the efficiency of the locally optimal designs are also given. Some of the designs found can also be used for planning D-optimal experiments for the normal linear model, where the mean must be positive. This research was carried out in part at University College, London as an M.Sc. project. Thanks are due to Prof. I. Ford (University of Glasgow) and Prof. A. Giovagnoli (University of Perugia) for their valuable suggestions and critical observations.     

Optimal two-stage group-sequential designs

We derive optimal two-stage adaptive group-sequential designs for normally distributed data which achieve the minimum of a mixture of expected sample sizes at the range of plausible values of a normal mean. Unlike standard group-sequential tests, our method is adaptive in that it allows the group size at the second look to be a function of the observed test statistic at the first look. Using optimality criteria, we construct two-stage designs which we show have advantage over other popular adaptive methods. The employed computational method is a modification of the backward induction algorithm applied to a Bayesian decision problem.     

D-optimal designs for beta regression models with single predictor

The problem of construction of D-optimal designs for beta regression models involving one predictor is considered for the mean-precision parameterization suggested by Ferrari and Cribari-Neto [Beta regression for modelling rates and proportions. J Appl Stat. 2004;31:799–815]. Here we use the logit link function for the mean sub-model. These designs are presented and discussed for unrestricted as well as restricted design regions by considering the precision parameter as (1) a known constant and (2) an unknown constant. Efficiency comparison of obtained designs with commonly used equi-weighted, equi-spaced designs is made to recommend designs for practical use. Real-life applications are given to show the usefulness of these designs.     

Optimal designs for threshold-determining limiting dilution assays

In common with other non-linear models, the optimal design for a limiting dilution assay (LDA) depends on the value of the unknown parameter, θ$\theta$, in the model. Consequently optimal designs cannot be specified unless some assumptions are made about the possible values of θ$\theta$. If a prior distribution can be specified then a Bayesian approach can be adopted. A proper specification of the Bayesian approach requires the aim of the experiment to be described and quantified through an appropriate utility function. This paper addresses the problem of finding optimal designs for LDAs when the aim is to determine whether θ$\theta$ is above or below a specified threshold, _θ0${\theta }_0$.     

Optimal progressive interval censoring plan under accelerated life test with limited budget

In this paper, we investigate some inference and design problems related to multiple constant-stress accelerated life test with progressive type-I interval censoring. A Weibull lifetime distribution at each stress-level combination is considered. The scale parameter of Weibull distribution is assumed to be a log-linear function of stresses. We obtain the estimates of the unknown parameters through the method of maximum likelihood, and also derive the Fisher's information matrix. The optimal number of test units, number of inspections, and length of the inspection interval are determined under D-optimality, T-optimality, and E-optimality criteria with cost constraint. An algorithm based on nonlinear mixed-integer programming is proposed to the optimal solution. The sensitivity of the optimal solution to changes in the values of the different parameters is studied.     

On the optimality of chemical balance weighing designs

In this paper we consider the problem of optimally weighing n objects with N weighings on a chemical balance. Several previously known results are generalized. In particular, the designs shown by Ehlich (1964a) and Payne (1974) to be D-optimal in various classes of weighing designs where N≡2 (mod4) are shown to be optimal with respect to any optimality criterion of Type I as defined in Cheng (1980). Several results on the E-optimality of weighing designs are also given.     

Optimal selection and ordering of columns in supersaturated designs

Two methods to select columns for assigning factors to work on supersaturated designs are proposed. The focus of interest is the degree of non-orthogonality between the selected columns. One method is the exhaustive enumeration of selections of p columns from all k columns to find the exact optimality, while the other is intended to find an approximate solution by applying techniques used in the corresponding analysis, aiming for ease of use as well as a reduction in the large computing time required for large k with the first method. Numerical illustrations for several typical design matrices reveal that the resulting “approximately” optimal assignments of factors to their columns are exactly optimal for any p. Ordering the columns in E(s²)-optimal designs results in promising new findings including a large number of E(s²)-optimal designs.     

Optimal designs for response functions with a downturn

In many toxicological assays, interactions between primary and secondary effects may cause a downturn in mean responses at high doses. In this situation, the typical monotonicity assumption is invalid and may be quite misleading. Prior literature addresses the analysis of response functions with a downturn, but so far as we know, this paper initiates the study of experimental design for this situation. A growth model is combined with a death model to allow for the downturn in mean doses. Several different objective functions are studied. When the number of treatments equals the number of parameters, Fisher information is found to be independent of the model of the treatment means and on the magnitudes of the treatments. In general, A- and D_A-optimal weights for estimating adjacent mean differences are found analytically for a simple model and numerically for a biologically motivated model. Results on c-optimality are also obtained for estimating the peak dose and the EC₅₀ (the treatment with response half way between the control and the peak response on the increasing portion of the response function). Finally, when interest lies only in the increasing portion of the response function, we propose composite D-optimal designs.     

Φp-optimal second order designs for symmetric regions

Designs for quadratic regression on a cube, on a cube with truncated vertices and on a ball are studied in terms of a family of criteria, introduced by Kiefer (1974, 1975), that includes A-, D- and E-optimality. Both theoretical and numerical results on structure and performance are presented. In particular, D- and E-optimal designs are described and a procedure of construction of nearly robust (under variation of criterion) integer designs is suggested. Some examples are given for dimensions 4, 5 and 6.     

Optimal paired comparison designs for first-order interactions

In many fields of applications paired comparisons are used in which either full or partial profiles of the alternatives are presented. For this situation we introduce an appropriate model and derive optimal designs in the presence of interactions when all attributes have the same number of levels.     

Experimental designs for binary data in switching measurements on superconducting Josephson junctions

Summary.  We study the optimal design of switching measurements of small Josephsonjunction circuits which operate in the macroscopic quantum tunnelling regime. In the experiment, sequences of current pulses are applied to the Josephson junction sample, while the voltage over the structure is monitored. The appearance of a voltage pulse to a single applied current pulse, being governed by the laws of quantum mechanics, is purely random. Starting from the D -optimality criterion we derive the optimal design for the estimation of the unknown parameters of the underlying Gumbel-type distribution. As a practical method for the measurements, we propose a sequential design that combines heuristic search for initial estimates and maximum likelihood estimation. The design presented has immediate applications in the area of superconducting electronics, implying faster data acquisition. The experimental results presented confirm the usefulness of the method.     

Optimal block designs comparing treatments with a control when the errors are correlated

The efficient design of experiments for comparing a control with v new treatments when the data are dependent is investigated. We concentrate on generalized least-squares estimation for a known covariance structure. We consider block sizes k equal to 3 or 4 and approximate designs. This method may lead to exact optimal designs for some v, b, k, but usually will only indicate the structure of an efficient design for any particular v, b, k, and yield an efficiency bound, usually unattainable. The bound and the structure can then be used to investigate efficient finite designs.