Dual Nonparametric CUSUM Control Chart Based on Ranks

In this article, we provide a sequential rank-based dual nonparametric CUSUM (DNC) control chart for detecting arbitrary magnitude of shifts in the location parameter. It is a self-starting scheme and thus can be used to monitor processes at the start-up stages. Moreover, we do not require any prior knowledge of the underlying distribution. A simulation study demonstrates that the proposed control chart not only performs robustly for different distributions, but also is efficient in detecting various magnitudes of shifts. An illustrative example is given to introduce the implementation of our proposed DNC control chart. It is easy to construct and fast to compute.     

Multivariate Control Chart Based on Multivariate Smirnov Test

Robust control charts are useful in statistical process control (SPC) when there is limited knowledge about the underlying process distribution, especially for multivariate observations. This article develops a new robust and self-starting multivariate procedure based on multivariate Smirnov test (MST), which integrates a multivariate two-sample goodness-of-fit (GOF) test based on multivariate empirical distribution function (MEDF) and the change-point model. As expected, simulation results show that our proposed control chart is robust to nonnormally distributed data, and moreover, it is efficient in detecting process shifts, especially large shifts, which is one of the main drawbacks of most robust control charts in the literature. As it avoids the need for a lengthy data-gathering step, the proposed chart is particularly useful in start-up or short-run situations. Comparison results and a real data example show that our proposed chart has great potential for application.     

A Sequential Rank-Based Nonparametric Adaptive EWMA Control Chart

Nonparametric control chart is useful when the underlying distribution is unknown, or is not likely to be normal. In this article, we provide a sequential rank-based nonparametric adaptive EWMA (NAE) control chart for detecting the persistent shift in the location parameter. This NAE chart is a self-starting scheme and thus can be used to monitor processes at the start-up stages rather than waiting for the accumulation of sufficiently large calibration samples. Moreover, we do not require any prior knowledge of the underlying distribution, and to prespecify any tuning parameter either. A Markov chain model is suggested to calibrate the run-length distribution of NAE, which is shown to have approximate tail probability as a geometric distribution. A simulation study demonstrates that the proposed control chart not only performs robustly for different distributions, but also is efficient in detecting various magnitude of shifts. A real-data example from manufacturing shows that it performs quite well in practical applications.     

A non parametric CUSUM control chart based on the Mann–Whitney statistic

We consider a novel univariate non parametric cumulative sum (CUSUM) control chart for detecting the small shifts in the mean of a process, where the nominal value of the mean is unknown but some historical data are available. This chart is established based on the Mann–Whitney statistic as well as the change-point model, where any assumption for the underlying distribution of the process is not required. The performance comparisons based on simulations show that the proposed control chart is slightly more effective than some other related non parametric control charts.     

The Synthetic Mean Square Error Control Chart

A synthetic mean square error (MSE) control chart is presented in this study for monitoring the changes in the mean and standard deviation of a normally distributed process. The synthetic MSE control chart is a combination of the standard MSE control chart and the conforming run length (CRL) control chart. From the numerical comparisons, the synthetic MSE control chart is always more efficient than the standard MSE control chart in detecting shifts in the process mean and standard deviation. The synthetic MSE chart also performs better than the exponentially weighted moving average-semicircle (EWMA-SC) chart, except for some cases where the process mean shifts are small.     

Economic design of non parametric sign control chart

An economic design of sign chart to control the median is proposed. Since the sign chart is distribution free, it can easily be applied to any process without prior knowledge of process quality distribution. The effect on loss cost observed for different shifts in location shows that the sign chart performs better for large shifts. The economic statistical performance study reveals that statistical performance of sign chart can be improved sufficiently for moderate shifts in the process. Sensitivity study shows that design is more sensitive for change in values of penalty loss cost and time required for search and repair of an assignable cause.     

Multivariate Change Point Control Chart Based on Data Depth for Phase I Analysis

A multivariate change point control chart based on data depth (CPDP) is considered for detecting shifts in either the mean vector, the covariance matrix, or both of the processes for Phase I. The proposed chart is preferable from a robustness point of view, has attractive detection performance, and can be especially useful in Phase I analysis setting, where there is limited information about the underlying process. Comparison results and an illustrative example show that our CPDP chart has great potential for Phase I analysis of multivariate individual observations. The application of CPDP chart is illustrated in a real data example.     

Monitoring process mean using generally weighted moving average chart for exponentially distributed characteristics

In this article, we will present a control chart using normal transformation and generally weighted moving average (GWMA) statistic when the quality characteristic follows the exponential distribution. We will develop the necessary measures to monitor the mean of the process using GWMA statistic and analyze the performance using simulation. The average run lengths for monitoring process average are given for various process shifts. The performance of the proposed chart is examined and compared with the existing control chart. The proposed control chart is effective for the monitoring of small shifts in the mean process. The application of the proposed chart is illustrated with the help of simulated data.     

A median loss control chart for monitoring quality loss under skewed distributions

The quality and loss of products are crucial factors separating competitive companies in global market. Firms widely employ a loss function to measure the loss caused by a deviation of the quality variable from the target value. Monitoring this deviation from the process target value is important from the view of Taguchi’s philosophy. In reality, there are many situations where the distribution of the quality variable may not be normal but skewed. This paper aims at developing a median loss (ML) control chart for monitoring quality loss under skewed distributions. Both the cases with fixed and variable sampling intervals are considered. Numerical results show that the ML chart with (optimal) variable sampling intervals performs better than the ML chart in detecting small to moderate shifts in the process loss centre or in the difference of mean and target and/or variance of a process variable. The ML chart and the ML chart with variable sampling intervals also illustrate the best performance in detection out-of-control process for a process quality variable with a left-skewed distribution. A numerical example illustrates the application of the proposed control chart.     

A new double sampling control chart for monitoring process mean using auxiliary information

Statistical quality control charts have been widely accepted as a potentially powerful process monitoring tool because of their excellent speed in tracking shifts in the underlying process parameter(s). In recent studies, auxiliary-information-based (AIB) control charts have shown superior run length performances than those constructed without using it. In this paper, a new double sampling (DS) control chart is constructed whose plotting-statistics requires information on the study variable and on any correlated auxiliary variable for efficiently monitoring the process mean, namely AIB DS chart. The AIB DS chart also encompasses the classical DS chart. We discuss in detail the construction, optimal design, run length profiles, and the performance evaluations of the proposed chart. It turns out that the AIB DS chart performs uniformly better than the DS chart when detecting different kinds of shifts in the process mean. It is also more sensitive than the classical synthetic and AIB synthetic charts when detecting a particular shift in the process mean. Moreover, with some realistic beliefs, the proposed chart outperforms the exponentially weighted moving average chart. An illustrative example is also presented to explain the working and implementation of the proposed chart.     

An optimal design of CUSUM control charts for binomial counts

The Shewhart p-chart or np-chart is commonly used for monitoring the counts of non-conforming items which are usually well modelled by a binomial distribution with parameters n and p where n is the number of items inspected each time and p is the process fraction of non-conforming items produced. It is well known that the Shewhart chart is not sensitive to small shifts in p. The cumulative sum (CUSUM) chart is a far more powerful charting procedure for detecting small shifts in p and only marginally less powerful in detecting large shifts in p. The choice of chart parameters of a Shewhart chart is well documented in the quality control literature. On the other hand, very little has been done for the more powerful CUSUM chart, possibly due to the fact that the run length distribution of a CUSUM chart is much harder to compute. An optimal design strategy is given here which allows the chart parameters of an optimal CUSUM chart to be determined easily. Optimal choice of n and the relationship between the CUSUM chart and the sequential probability ratio test are also investigated.     

Optimal design of the adaptive exponentially weighted moving average control chart over a range of mean shifts

The adaptive exponentially weighted moving average (AEWMA) control chart is a smooth combination of the Shewhart and exponentially weighted moving average (EWMA) control charts. This chart was proposed by Cappizzi and Masarotto (2003) to achieve a reasonable performance for both small and large shifts. Cappizzi and Masarotto (2003) used a pair of shifts in designing their control chart. In this study, however, the process mean shift is considered as a random variable with a certain probability distribution and the AEWMA control chart is optimized for a wide range of mean shifts according to that probability distribution and not just for a pair of shifts. Using the Markov chain technique, the results show that the new optimization design can improve the performance of the AEWMA control chart from an overall point of view relative to the various designs presented by Cappizzi and Masarotto (2003). Optimal design parameters that achieve the desired in-control average run length (ARL) are computed in several cases and formulas used to find approximately their values are given. Using these formulas, the practitioner can compute the optimal design parameters corresponding to any desired in-control ARL without the need to apply the optimization procedure. The results obtained by these formulas are very promising and would particularly facilitate the design of the AEWMA control chart for any in-control ARL value.     

Short run spc based upon the second order dynamic linear model for trend detection

Recently, several new applications of control chart procedures for short production runs have been introduced. Bothe (1989) and Burr (1989) proposed the use of control chart statistics which are obtained by scaling the quality characteristic by target values or process estimates of a location and scale parameter. The performance of these control charts can be significantly affected by the use of incorrect scaling parameters, resulting in either an excessive "false alarm rate," or insensitivity to the detection of moderate shifts in the process. To correct for these deficiencies, Quesenberry (1990, 1991) has developed the Q-Chart which is formed from running process estimates of the sample mean and variance. For the case where both the process mean and variance are unknown, the Q-chaxt statistic is formed from the standard inverse Z-transformation of a t-statistic. Q-charts do not perform correctly, however, in the presence of special cause disturbances at process startup. This has recently been supported by results published by Del Castillo and Montgomery (1992), who recommend the use of an alternative control chart procedure which is based upon a first-order adaptive Kalman filter model Consistent with the recommendations by Castillo and Montgomery, we propose an alternative short run control chart procedure which is based upon the second order dynamic linear model (DLM). The control chart is shown to be useful for the early detection of unwanted process trends. Model and control chart parameters are updated sequentially in a Bayesian estimation framework, providing the greatest degree of flexibility in the level of prior information which is incorporated into the model. The result is a weighted moving average control chart statistic which can be used to provide running estimates of process capability. The average run length performance of the control chart is compared to the optimal performance of the exponentially weighted moving average (EWMA) chart, as reported by Gan (1991). Using a simulation approach, the second order DLM control chart is shown to provide better overall performance than the EWMA for short production run applications     

Economic design of VSI X̄ control chart with correlated non-normal data under multiple assignable causes

It has been recently revealed that the Shewhart control charts with variable sampling interval (VSI) perform better than the traditional Shewhart chart with the fixed sampling interval in detecting shifts in the process. In most of these research works, the normality and independency of the process data or measurements are assumed and that the process is subjected to only one assignable cause. While, in practice, these assumptions usually do not hold, some recent studies are focused on working with only one or two of these violations. In this paper, the situation in which the process data are correlated and follow a non-normal distribution and that there is multiplicity of assignable causes in the process is considered. For this case, a cost model for the economic design of the VSI X? control chart is developed, where the Burr distribution is employed to represent the non-normal distribution of the process data. To obtain the optimal values of the design parameters, a genetic algorithm is employed in which the response surface methodology is applied. A numerical example is presented to show the applicability and effectiveness of the proposed methodology. Sensitivity analysis is also carried out to evaluate the effects of cost and input parameters on the performance of the chart.     

Robust algorithms for economic designing of a nonparametric control chart for abrupt shift in location

The existing statistical process control procedures typically rely on the fundamental assumption of a parametric distribution of the quality characteristic. However, when there is a lack of knowledge about the underlying distribution (as full knowledge is not available in practice), the performance of these parametric charts is very likely to be heavily degraded. Motivated by this problem, a one-sided nonparametric monitoring procedure using the single sample sign statistic is proposed for detecting a shift in the location parameter of a continuous distribution. An economic model of the control chart is developed to optimize the sample size, sampling interval, and control limits. Three data-dependent estimation approaches for the unknown parameter are evaluated and discussed. Simulation results exhibit that our proposed procedure generally performs well under a great variety of continuous distributions and hence it is recommended as an alternative scheme especially when the knowledge of the underlying distribution is imperfect. Furthermore, beneficial recommendations of estimation approach selection are provided for practical implementation of the control chart.     

On designing new optimal synthetic Tukey’s control charts

Tukey’s control chart is generally used for monitoring the processes where the measurement process physically damages the product. It is based on single observation and robust to outliers. In this paper, two optimal synthetic Tukey’s control charts are proposed by integrating the conforming run length chart with the Tukey’s control chart and its modification. The performance comparison of the proposed charts with the existing Tukey’s control charts is made by using out-of-control average run length and extra quadratic loss as performance metrics. The proposed charts offer better protection against the process shifts as compare to the existing Tukey’s control charts when the underlying process distribution is symmetric or asymmetric. Simulation studies also establish the supremacy of the proposed control charts over the existing Tukey’s control charts. In the end, an illustrative example based on a real data set of the combined cycle power plant is provided for practical implementation.     

A new nonparametric synthetic EWMA control chart for monitoring process mean

The exponentially weighted moving average (EWMA) control charts are widely used in chemical and process industries because of their excellent speed in catching small to moderate shifts in the process target. In usual practice, many data come from a process where the monitoring statistic is non-normally distributed or it follows an unknown probability distribution. This necessitates the use of distribution-free/nonparametric control charts for monitoring the deviations from the process target. In this paper, we integrate the existing EWMA sign chart with the conforming run length chart to propose a new synthetic EWMA (SynEWMA) sign chart for monitoring the process mean. The SynEWMA sign chart encompasses the synthetic sign and EWMA sign charts. Monte Carlo simulations are used to compute the run length profiles of the SynEWMA sign chart. Based on a comprehensive comparison, it turns out that the SynEWMA sign chart is able to perform substantially better than the existing EWMA sign chart. Both real and simulated data sets are used to explain the working and implementation of existing and proposed control charts.     

Robustness of the EWMA and the combined X¯–EWMA control charts with variable sampling intervals to non-normality

The exponentially weighted moving average (EWMA) control charts with variable sampling intervals (VSIs) have been shown to be substantially quicker than the fixed sampling intervals (FSI) EWMA control charts in detecting process mean shifts. The usual assumption for designing a control chart is that the data or measurements are normally distributed. However, this assumption may not be true for some processes. In the present paper, the performances of the EWMA and combined X¯–EWMA control charts with VSIs are evaluated under non-normality. It is shown that adding the VSI feature to the EWMA control charts results in very substantial decreases in the expected time to detect shifts in process mean under both normality and non-normality. However, the combined X¯–EWMA chart has its false alarm rate and its detection ability is affected if the process data are not normally distributed.     

A mixed control chart for monitoring failure times under accelerated hybrid censoring

In an accelerated hybrid censoring scheme several stress factors can be accelerated to make the products to respond to fail more quickly than under normal operating conditions. In such situations, the control charts available in the literature cover the attribute characteristics only to monitor the performance of the process over time. This study extends the idea by proposing an optimal mixed attribute-variable control chart for Weibull distribution under an accelerated hybrid censoring scheme keeping the advantages of both attribute and variable control charts. It first monitors the number of defectives under accelerated conditions and switches to the variable control chart to investigate the mean failure times when the process stability is dubious. The performance of the proposed chart is evaluated by using run-length characteristics, and the optimality of the design parameter is achieved by minimizing the out-of-control average run length. The simulation study depicted better performance of the proposed control chart than the traditional charts in detecting shifts in the process. A real-life application is also included.KEYWORDS: Mixed control chart, attribute chart, variable chart, Weibull distribution, accelerated hybrid censoring     

Ewma control chart under linear drift

An accurate numerical procedure is presented for computing the average run length (ARL) of an exponentially weighted moving average (EWMA) chart under a linear drift in the process mean. The performance of an EWMA chart is then evaluated under a linear drift in the mean. In processes where gradual linear drifts rather than abrupt changes in the mean model the shifts in the mean more accurately, an evaluation of the performance of an EWMA chart under a linear drift is more appropriate. Tables of optimal smoothing parameters and control chart limits are given which make the design of EWMA charts easy.