A comparison of robust alternatives to Hotelling’s T 2 control chart

Control charts are one of the widest used techniques in statistical process control. In Phase I, historical observations are analysed in order to construct a control chart. Because of the existence of multiple outliers that are undetected by control charts such as Hotelling’s T ² due to the masking effect, robust alternatives to Hotelling’s T ² have been developed based on minimum volume ellipsoid (MVE) estimators, minimum covariance determinant (MCD) estimators, reweighted MCD estimators or trimmed estimators. In this paper, we use a simulation study to analyse the performance of each alternative in various situations and offer guidance for the correct use of each estimator.     

New robust estimators for detecting non-random patterns in multivariate control charts: a simulation approach

In the past decade, different robust estimators have been proposed by several researchers to improve the ability to detect non-random patterns such as trend, process mean shift, and outliers in multivariate control charts. However, the use of the sample mean vector and the mean square successive difference matrix in the T ² control chart is sensitive in detecting process mean shift or trend but less sensitive in detecting outliers. On the other hand, the minimum volume ellipsoid (MVE) estimators in the T ² control chart are sensitive in detecting multiple outliers but less sensitive in detecting trend or process mean shift. Therefore, new robust estimators using both merits of the mean square successive difference matrix and the MVE estimators are developed to modify Hotelling's T ² control chart. To compare the detection performance among various control charts, a simulation approach for establishing control limits and calculating signal probabilities is provided as well. Our simulation results show that a multivariate control chart using the new robust estimators can achieve a well-balanced sensitivity in detecting the above-mentioned non-random patterns. Finally, three numerical examples further demonstrate the usefulness of our new robust estimators.     

Multivariate Control Charts Based on Hybrid Novelty Scores

We propose a new nonparametric multivariate control chart that integrates a novelty score. The proposed control chart uses as its monitoring statistic a hybrid novelty score, calculated based on the distance to local observations as well as on the distance to the convex hull constructed by its neighbors. The control limits of the proposed control chart were established based on a bootstrap method. A rigorous simulation study was conducted to examine the properties of the proposed control chart under various scenarios and compare it with existing multivariate control charts in terms of average run length (ARL) performance. The simulation results showed that the proposed control chart outperformed both the parametric and nonparametric Hotelling's T ² control charts, especially in nonnormal situations. Moreover, experimental results with real semiconductor data demonstrated the applicability and effectiveness of the proposed control chart. To increase the capability to detect small mean shift, we propose an exponentially weighted hybrid novelty score control chart. Simulation results indicated that exponentially weighted hybrid score charts outperformed the hybrid novelty score based control charts.     

Integration of classification algorithms and control chart techniques for monitoring multivariate processes

We propose new multivariate control charts that can effectively deal with massive amounts of complex data through their integration with classification algorithms. We call the proposed control chart the ‘Probability of Class (PoC) chart’ because the values of PoC, obtained from classification algorithms, are used as monitoring statistics. The control limits of PoC charts are established and adjusted by the bootstrap method. Experimental results with simulated and real data showed that PoC charts outperform Hotelling's T ² control charts. Further, a simulation study revealed that a small proportion of out-of-control observations are sufficient for PoC charts to achieve the desired performance.     

Integration of support vector machines and control charts for multivariate process monitoring

Statistical process control tools have been used routinely to improve process capabilities through reliable on-line monitoring and diagnostic processes. In the present paper, we propose a novel multivariate control chart that integrates a support vector machine (SVM) algorithm, a bootstrap method, and a control chart technique to improve multivariate process monitoring. The proposed chart uses as the monitoring statistic the predicted probability of class (PoC) values from an SVM algorithm. The control limits of SVM-PoC charts are obtained by a bootstrap approach. A simulation study was conducted to evaluate the performance of the proposed SVM–PoC chart and to compare it with other data mining-based control charts and Hotelling's T ² control charts under various scenarios. The results showed that the proposed SVM–PoC charts outperformed other multivariate control charts in nonnormal situations. Further, we developed an exponential weighed moving average version of the SVM–PoC charts for increasing sensitivity to small shifts.     

Mixed multivariate EWMA-CUSUM control charts for an improved process monitoring

Multivariate exponential weighted moving average and cumulative sum charts are the most common memory type multivariate control charts. They make use of the present and past information to detect small shifts in the process parameter(s). In this article, we propose two new multivariate control charts using a mixed version of their design setups. The plotting statistics of the proposed charts are based on the cumulative sum of the multivariate exponentially weighted moving averages. The performances of these schemes are evaluated in terms of average run length. The proposals are compared with their existing counterparts, including HotellingT², MCUSUM, MEWMA, and MC1 charts. An application example is also presented for practical considerations using a real dataset.     

Bootstrap-Based T 2 Multivariate Control Charts

Control charts have been used effectively for years to monitor processes and detect abnormal behaviors. However, most control charts require a specific distribution to establish their control limits. The bootstrap method is a nonparametric technique that does not rely on the assumption of a parametric distribution of the observed data. Although the bootstrap technique has been used to develop univariate control charts to monitor a single process, no effort has been made to integrate the effectiveness of the bootstrap technique with multivariate control charts. In the present study, we propose a bootstrap-based multivariate T ² control chart that can efficiently monitor a process when the distribution of observed data is nonnormal or unknown. A simulation study was conducted to evaluate the performance of the proposed control chart and compare it with a traditional Hotelling's T ² control chart and the kernel density estimation (KDE)-based T ² control chart. The results showed that the proposed chart performed better than the traditional T ² control chart and performed comparably with the KDE-based T ² control chart. Furthermore, we present a case study to demonstrate the applicability of the proposed control chart to real situations.     

A Multivariate Synthetic Control Chart for Monitoring the Process Mean Vector of Skewed Populations Using Weighted Standard Deviations

This article proposes a multivariate synthetic control chart for skewed populations based on the weighted standard deviation method. The proposed chart incorporates the weighted standard deviation method into the standard multivariate synthetic control chart. The standard multivariate synthetic chart consists of the Hotelling's T ² chart and the conforming run length chart. The weighted standard deviation method adjusts the variance–covariance matrix of the quality characteristics and approximates the probability density function using several multivariate normal distributions. The proposed chart reduces to the standard multivariate synthetic chart when the underlying distribution is symmetric. In general, the simulation results show that the proposed chart performs better than the existing multivariate charts for skewed populations and the standard T ² chart, in terms of false alarm rates as well as moderate and large mean shift detection rates based on the various degrees of skewnesses.     

Bivariate copulas on the Hotelling's T2 control chart

In this paper, we propose five types of copulas on the Hotelling's T² control chart when observations are from exponential distribution and use the Monte Carlo simulation to compare the performance of the control chart, which is based on the Average Run Length (ARL) for each copula. Five types of copulas function for specifying dependence between random variables are used and measured by Kendall's tau. The results show that the copula approach can be fitted the observation and we can use copula as an option for application on Hotelling's T² control chart.     

One-Class Classification-Based Control Charts for Monitoring Autocorrelated Multivariate Processes

In recent years, statistical process control (SPC) of multivariate and autocorrelated processes has received a great deal of attention. Modern manufacturing/service systems with more advanced technology and higher production rates can generate complex processes in which consecutive observations are dependent and each variable is correlated. These processes obviously violate the assumption of the independence of each observation that underlies traditional SPC and thus deteriorate the performance of its traditional tools. The popular way to address this issue is to monitor the residuals—the difference between the actual value and the fitted value—with the traditional SPC approach. However, this residuals-based approach requires two steps: (1) finding the residuals; and (2) monitoring the process. Also, an accurate prediction model is necessary to obtain the uncorrelated residuals. Furthermore, these residuals are not the original values of the observations and consequently may have lost some useful information about the targeted process. The main purpose of this article is to examine the feasibility of using one-class classification-based control charts to handle multivariate and autocorrelated processes. The article uses simulated data to present an analysis and comparison of one-class classification-based control charts and the traditional Hotelling's T ² chart.     

THE CONTROL CHART FOR INDIVIDUAL OBSERVATIONS FROM A MULTIVARIATE NON-NORMAL DISTRIBUTION

The Hotelling's T²statistic has been used in constructing a multivariate control chart for individual observations. In Phase II operations, the distribution of the T²statistic is related to the F distribution provided the underlying population is multivariate normal. Thus, the upper control limit (UCL) is proportional to a percentile of the F distribution. However, if the process data show sufficient evidence of a marked departure from multivariate normality, the UCL based on the F distribution may be very inaccurate. In such situations, it will usually be helpful to determine the UCL based on the percentile of the estimated distribution for T². In this paper, we use a kernel smoothing technique to estimate the distribution of the T²statistic as well as of the UCL of the T²chart, when the process data are taken from a multivariate non-normal distribution. Through simulations, we examine the sample size requirement and the in-control average run length of the T²control chart for sample observations taken from a multivariate exponential distribution. The paper focuses on the Phase II situation with individual observations.     

A control chart based on sample ranges for monitoring the covariance matrix of the multivariate processes

For the univariate case, the R chart and the S ² chart are the most common charts used for monitoring the process dispersion. With the usual sample size of 4 and 5, the R chart is slightly inferior to the S ² chart in terms of efficiency in detecting process shifts. In this article, we show that for the multivariate case, the chart based on the standardized sample ranges, we call the RMAX chart, is substantially inferior in terms of efficiency in detecting shifts in the covariance matrix than the VMAX chart, which is based on the standardized sample variances. The user's familiarity with sample ranges is a point in favor of the RMAX chart. An example is presented to illustrate the application of the proposed chart.     

Applying State Space to SPC: Monitoring Multivariate Time Series

Monitoring cross-sectional and serially interdependent processes has become a new issue in statistical process control (SPC). In up-to-date SPC literature, Kalman filtering was reported to monitor univariate autocorrelated processes. This paper applies a Kalman filter or state-space method for SPC to monitoring multivariate time series. We use Aoki's approach to estimate the parameter matrices of a state-space model. Multivariate Hotelling T ² control charts are employed to monitor the residuals of the state-space. Examples of this approach are illustrated.     

Single Attribute Control Charts for a Markovian-Dependent Process

In a production process, sequence of observations related to the quality of a process need not be independent. In such situations, control charts based on the assumption of independence of the observations are not appropriate. When the characteristic under study is qualitative, the Markovian model serves as a simple model to account for the dependency of the observations. In this article, we develop two attribute control charts for a Markovian dependent process: the first is based on controlling the error probabilities; the second is based on minimizing the average time to get a correct signal.

The charts are developed under uniform sampling. Under uniform sampling, the two consecutive samples are far enough apart, so that for all practical purposes, two consecutive samples can be considered as if they are being independent. Optimal values of the design parameters of both the control charts are obtained. A procedure to estimate the values of the in-control parameters is also described. The chart's performance is evaluated using the probability of detecting shift. When we implement the proposed charts for the data simulated under given manufacturing environments, the charts exhibit the desired properties of error probabilities and average time to signal.     

A Multivariate Synthetic Control Chart for Monitoring Process Mean Vector

In this article, a multivariate synthetic control chart is developed for monitoring the mean vector of a normally distributed process. The proposed chart is a combination of the Hotelling's T ² chart and Conforming Run Length chart. The operation, design, and performance of the chart are described. Average run length comparisons between some other existing control charts and the synthetic T ² chart are presented. They indicate that the synthetic T ² chart outperforms Hotelling's T ² chart and T ² chart with supplementary runs rules.     

A robust R control chart based on a two-step estimator of the process dispersion

ABSTRACT

Control charts are the frequently used tools for monitoring and controlling the processes. Classical control charts are sensitive to existing contaminated data which may be presented in the data collected from the processes. Thus, these charts are not able to control the processes precisely when the data are contaminated. Robust control charts are those which are less sensitive to contamination. Some robust control charts for monitoring the process variability were proposed in the past which are robust to some sorts of contamination. In this paper a new robust R control chart is proposed which is less sensitive to wide range of contaminations, i.e. general and local contaminations. Simulation studies are performed to compare the performance of the proposed control chart with some classical and robust control charts, using ARL and MSD as criteria for comparisons purposes. The simulation results show a very good performance of the proposed chart when both types of contaminations exist.     

Multivariate Control Chart Based on Multivariate Smirnov Test

Robust control charts are useful in statistical process control (SPC) when there is limited knowledge about the underlying process distribution, especially for multivariate observations. This article develops a new robust and self-starting multivariate procedure based on multivariate Smirnov test (MST), which integrates a multivariate two-sample goodness-of-fit (GOF) test based on multivariate empirical distribution function (MEDF) and the change-point model. As expected, simulation results show that our proposed control chart is robust to nonnormally distributed data, and moreover, it is efficient in detecting process shifts, especially large shifts, which is one of the main drawbacks of most robust control charts in the literature. As it avoids the need for a lengthy data-gathering step, the proposed chart is particularly useful in start-up or short-run situations. Comparison results and a real data example show that our proposed chart has great potential for application.     

Identification of out of control quality characteristics in a multivariate manufacturing environment

There are many instances in which the quality of a product or constancy of a process is determined by the joint levels of several attributes or properties. During the conduct of such a process or the production of such a product, one wishes to detect as quickly as possible any departure from a satisfactory state, while at the same time identifying which attributes are responsible for the deviation. In most cases of practical interest, however, there exist correlations among the several properties of interest; this makes it advisable to monitor certain aggregate characteristics of the process, rather than observing its various components separately. When the mean vector of the quality attributes is the major concern, this aggregate monitoring function is most commonly implemented via a T ² chart. The dependencies among attributes, however, complicate the determination of which are responsible when a deviation occurs. This paper presents an approach to help identify aberrant variables when Shewhart type multivariate control charts based on Hotelling's T ² are in use.     

The Design and Performance of the Multivariate Synthetic-T 2 Control Chart

One of the objectives of research in statistical process control is to obtain control charts that show few false alarms but, at the same time, are able to detect quickly the shifts in the distribution of the quality variables employed to monitor a productive process. In this article, the synthetic-T ² control chart is developed, which consists of the simultaneous use of a CRL chart and a Hotelling's T ² control chart. The ARL is calculated employing Markov chains for steady and zero-state scenarios. A procedure of optimization has been developed to obtain the optimum parameters of the synthetic-T ², for zero and steady cases, given the values of in-control ARL and magnitude of shift which needs to be detected rapidly. A comparison between (standard T ², MEWMA, T ² with variable sample size, and T ² with double sampling) charts reveals that the synthetic-T ² chart always performs better than the standard T ² chart. The comparison with the remaining charts demonstrate in which cases the performance of this new chart makes it interesting to employ in real applications.