Generalised Rank Regression Estimator with Standard Error Adjusted Lasso

One of the standard variable selection procedures in multiple linear regression is to use a penalisation technique in least‐squares (LS) analysis. In this setting, many different types of penalties have been introduced to achieve variable selection. It is well known that LS analysis is sensitive to outliers, and consequently outliers can present serious problems for the classical variable selection procedures. Since rank‐based procedures have desirable robustness properties compared to LS procedures, we propose a rank‐based adaptive lasso‐type penalised regression estimator and a corresponding variable selection procedure for linear regression models. The proposed estimator and variable selection procedure are robust against outliers in both response and predictor space. Furthermore, since rank regression can yield unstable estimators in the presence of multicollinearity, in order to provide inference that is robust against multicollinearity, we adjust the penalty term in the adaptive lasso function by incorporating the standard errors of the rank estimator. The theoretical properties of the proposed procedures are established and their performances are investigated by means of simulations. Finally, the estimator and variable selection procedure are applied to the Plasma Beta‐Carotene Level data set.     

Robust ridge and robust Liu estimator for regression based on the LTS estimator

In the multiple linear regression analysis, the ridge regression estimator and the Liu estimator are often used to address multicollinearity. Besides multicollinearity, outliers are also a problem in the multiple linear regression analysis. We propose new biased estimators based on the least trimmed squares (LTS) ridge estimator and the LTS Liu estimator in the case of the presence of both outliers and multicollinearity. For this purpose, a simulation study is conducted in order to see the difference between the robust ridge estimator and the robust Liu estimator in terms of their effectiveness; the mean square error. In our simulations, the behavior of the new biased estimators is examined for types of outliers: X-space outlier, Y-space outlier, and X-and Y-space outlier. The results for a number of different illustrative cases are presented. This paper also provides the results for the robust ridge regression and robust Liu estimators based on a real-life data set combining the problem of multicollinearity and outliers.     

A MORE GENERAL CRITERION FOR SUBSET SELECTION IN MULTIPLE LINEAR REGRESSION

ABSTRACT

In this article, we propose a more general criterion called S_p -criterion, for subset selection in the multiple linear regression Model. Many subset selection methods are based on the Least Squares (LS) estimator of β, but whenever the data contain an influential observation or the distribution of the error variable deviates from normality, the LS estimator performs ‘poorly’ and hence a method based on this estimator (for example, Mallows’ C_p -criterion) tends to select a ‘wrong’ subset. The proposed method overcomes this drawback and its main feature is that it can be used with any type of estimator (either the LS estimator or any robust estimator) of β without any need for modification of the proposed criterion. Moreover, this technique is operationally simple to implement as compared to other existing criteria. The method is illustrated with examples.     

Performance of Kibria's Method for the Heteroscedastic Ridge Regression Model: Some Monte Carlo Evidence

It is common for a linear regression model that the error terms display some form of heteroscedasticity and at the same time, the regressors are also linearly correlated. Both of these problems have serious impact on the ordinary least squares (OLS) estimates. In the presence of heteroscedasticity, the OLS estimator becomes inefficient and the similar adverse impact can also be found on the ridge regression estimator that is alternatively used to cope with the problem of multicollinearity. In the available literature, the adaptive estimator has been established to be more efficient than the OLS estimator when there is heteroscedasticity of unknown form. The present article proposes the similar adaptation for the ridge regression setting with an attempt to have more efficient estimator. Our numerical results, based on the Monte Carlo simulations, provide very attractive performance of the proposed estimator in terms of efficiency. Three different existing methods have been used for the selection of biasing parameter. Moreover, three different distributions of the error term have been studied to evaluate the proposed estimator and these are normal, Student's t and F distribution.     

A new modified Jackknifed estimator for the Poisson regression model

The Poisson regression is very popular in applied researches when analyzing the count data. However, multicollinearity problem arises for the Poisson regression model when the independent variables are highly intercorrelated. Shrinkage estimator is a commonly applied solution to the general problem caused by multicollinearity. Recently, the ridge regression (RR) estimators and some methods for estimating the ridge parameter k in the Poisson regression have been proposed. It has been found that some estimators are better than the commonly used maximum-likelihood (ML) estimator and some other RR estimators. In this study, the modified Jackknifed Poisson ridge regression (MJPR) estimator is proposed to remedy the multicollinearity. A simulation study and a real data example are provided to evaluate the performance of estimators. Both mean-squared error and the percentage relative error are considered as the performance criteria. The simulation study and the real data example results show that the proposed MJPR method outperforms the Poisson ridge regression, Jackknifed Poisson ridge regression and the ML in all of the different situations evaluated in this paper.     

A simulation study on SPSS ridge regression and ordinary least squares regression procedures for multicollinearity data

This study compares the SPSS ordinary least squares (OLS) regression and ridge regression procedures in dealing with multicollinearity data. The LS regression method is one of the most frequently applied statistical procedures in application. It is well documented that the LS method is extremely unreliable in parameter estimation while the independent variables are dependent (multicollinearity problem). The Ridge Regression procedure deals with the multicollinearity problem by introducing a small bias in the parameter estimation. The application of Ridge Regression involves the selection of a bias parameter and it is not clear if it works better in applications. This study uses a Monte Carlo method to compare the results of OLS procedure with the Ridge Regression procedure in SPSS.     

Two-parameter ridge estimator in the binary logistic regression

The binary logistic regression is a commonly used statistical method when the outcome variable is dichotomous or binary. The explanatory variables are correlated in some situations of the logit model. This problem is called multicollinearity. It is known that the variance of the maximum likelihood estimator (MLE) is inflated in the presence of multicollinearity. Therefore, in this study, we define a new two-parameter ridge estimator for the logistic regression model to decrease the variance and overcome multicollinearity problem. We compare the new estimator to the other well-known estimators by studying their mean squared error (MSE) properties. Moreover, a Monte Carlo simulation is designed to evaluate the performances of the estimators. Finally, a real data application is illustrated to show the applicability of the new method. According to the results of the simulation and real application, the new estimator outperforms the other estimators for all of the situations considered.     

The small sample properties of the restricted principal component regression estimator in linear regression model

In regression analysis, to deal with the problem of multicollinearity, the restricted principal components regression estimator is proposed. In this paper, we compared the restricted principal components regression estimator, the principal components regression estimator, and the ordinary least-squares estimator with each other under the Pitman's closeness criterion. We showed that the restricted principal components regression estimator is always superior to the principal components regression estimator, under certain conditions the restricted principal components regression estimator is superior to the ordinary least-squares estimator under the Pitman's closeness criterion and under certain conditions the principal components regression estimator is superior to the ordinary least-squares estimator under the Pitman's closeness criterion.     

A new estimator combining the ridge regression and the restricted least squares methods of estimation

It is well-known in the literature on multicollinearity that one of the major consequences of multicollinearity on the ordinary least squares estimator is that the estimator produces large sampling variances, which in turn might inappropriately lead to exclusion of otherwise significant coefficients from the model. To circumvent this problem, two accepted estimation procedures which are often suggested are the restricted least squares method and the ridge regression method. While the former leads to a reduction in the sampling variance of the estimator, the later ensures a smaller mean square error value for the estimator. In this paper we have proposed a new estimator which is based on a criterion that combines the ideas underlying these two estimators. The standard properties of this new estimator have been studied in the paper. It has also been shown that this estimator is superior to both the restricted least squares as well as the ordinary ridge regression estimators by the criterion of mean sauare error of the estimator of the regression coefficients when the restrictions are indeed correct. The conditions for superiority of this estimator over the other two have also been derived for the situation when the restrictions are not correct.     

New Shrinkage Parameters for the Liu-type Logistic Estimators

The binary logistic regression is a widely used statistical method when the dependent variable has two categories. In most of the situations of logistic regression, independent variables are collinear which is called the multicollinearity problem. It is known that multicollinearity affects the variance of maximum likelihood estimator (MLE) negatively. Therefore, this article introduces new shrinkage parameters for the Liu-type estimators in the Liu (2003) in the logistic regression model defined by Huang (2012) in order to decrease the variance and overcome the problem of multicollinearity. A Monte Carlo study is designed to show the goodness of the proposed estimators over MLE in the sense of mean squared error (MSE) and mean absolute error (MAE). Moreover, a real data case is given to demonstrate the advantages of the new shrinkage parameters.     

Efficiency of the QR class estimator in semiparametric regression models to combat multicollinearity

There are some classes of biased estimators for solving the multicollinearity among the predictor variables in statistical literature. In this research, we propose a modified estimator based on the QR decomposition in the semiparametric regression models, to combat the multicollinearity problem of design matrix which makes the data to be less distorted than the other methods. We derive the properties of the proposed estimator, and then, the necessary and sufficient condition for the superiority of the partially generalized QR-based estimator over partially generalized least-squares estimator is obtained. In the biased estimators, selection of shrinkage parameters plays an important role in data analysing. We use generalized cross-validation criterion for selecting the optimal shrinkage parameter and the bandwidth of the kernel smoother. Finally, the Monté-Carlo simulation studies and a real application related to bridge construction data are conducted to support our theoretical discussion.     

Preliminary phi-divergence test estimators for linear restrictions in a logistic regression model

The problem of estimation of the parameters in a logistic regression model is considered under multicollinearity situation when it is suspected that the parameter of the logistic regression model may be restricted to a subspace. We study the properties of the preliminary test based on the minimum ϕ -divergence estimator as well as in the ϕ -divergence test statistic. The minimum ϕ -divergence estimator is a natural extension of the maximum likelihood estimator and the ϕ -divergence test statistics is a family of the test statistics for testing the hypothesis that the regression coefficients may be restricted to a subspace.     

Multivariate regression analysis and canonical variates

A method called FICYREG of estimating regression coefficients is introduced. This is a generalization to the multivariate regression problem of the James-Stein estimator. When suitably représentés FICYREG emerges as a rule in which the canonical variates and canonical correlations have an intrinsic role to play. By exploiting these objects FICYREG is able to achieve stability against the influence of the “noise” present in problems where the responses are correlated so that some of the response vector's canonical variates will be essentially independent of all others including the predictors. The least squares (LS) estimator is, by contrast, highly sensitive to this noise. The use of FICYREG is illustrated in terms of an example, and its peformance is compared to the LS estimator when a quadratic loss function is assumed. The cases of both fixed and random predictors are considered. Overall, FICYREG outperforms the LS estimator.     

On the performance of some new Liu parameters for the gamma regression model

The maximum likelihood (ML) method is used to estimate the unknown Gamma regression (GR) coefficients. In the presence of multicollinearity, the variance of the ML method becomes overstated and the inference based on the ML method may not be trustworthy. To combat multicollinearity, the Liu estimator has been used. In this estimator, estimation of the Liu parameter d is an important problem. A few estimation methods are available in the literature for estimating such a parameter. This study has considered some of these methods and also proposed some new methods for estimation of the d. The Monte Carlo simulation study has been conducted to assess the performance of the proposed methods where the mean squared error (MSE) is considered as a performance criterion. Based on the Monte Carlo simulation and application results, it is shown that the Liu estimator is always superior to the ML and recommendation about which best Liu parameter should be used in the Liu estimator for the GR model is given.     

Robust Linearized Ridge M-estimator for Linear Regression Model

In the multiple linear regression, multicollinearity and outliers are commonly occurring problems. They produce undesirable effects on the ordinary least squares estimator. Many alternative parameter estimation methods are available in the literature which deals with these problems independently. In practice, it may happen that the multicollinearity and outliers occur simultaneously. In this article, we present a new estimator called as Linearized Ridge M-estimator which combats the problem of simultaneous occurrence of multicollinearity and outliers. A real data example and a simulation study is carried out to illustrate the performance of the proposed estimator.     

Robust two parameter ridge M-estimator for linear regression

The problem of multicollinearity and outliers in the data set produce undesirable effects on the ordinary least squares estimator. Therefore, robust two parameter ridge estimation based on M-estimator (ME) is introduced to deal with multicollinearity and outliers in the y-direction. The proposed estimator outperforms ME, two parameter ridge estimator and robust ridge M-estimator according to mean square error criterion. Moreover, a numerical example and a Monte Carlo simulation experiment are presented.     

Developing a Liu estimator for the negative binomial regression model: method and application

This paper introduces a new shrinkage estimator for the negative binomial regression model that is a generalization of the estimator proposed for the linear regression model by Liu [A new class of biased estimate in linear regression, Comm. Stat. Theor. Meth. 22 (1993), pp. 393–402]. This shrinkage estimator is proposed in order to solve the problem of an inflated mean squared error of the classical maximum likelihood (ML) method in the presence of multicollinearity. Furthermore, the paper presents some methods of estimating the shrinkage parameter. By means of Monte Carlo simulations, it is shown that if the Liu estimator is applied with these shrinkage parameters, it always outperforms ML. The benefit of the new estimation method is also illustrated in an empirical application. Finally, based on the results from the simulation study and the empirical application, a recommendation regarding which estimator of the shrinkage parameter that should be used is given.     

On the Principal Component Liu-type Estimator in Linear Regression

In this article, we present a principal component Liu-type estimator (LTE) by combining the principal component regression (PCR) and LTE to deal with the multicollinearity problem. The superiority of the new estimator over the PCR estimator, the ordinary least squares estimator (OLSE) and the LTE are studied under the mean squared error matrix. The selection of the tuning parameter in the proposed estimator is also discussed. Finally, a numerical example is given to explain our theoretical results.     

A new kind of stochastic restricted biased estimator for logistic regression model

In the logistic regression model, the variance of the maximum likelihood estimator is inflated and unstable when the multicollinearity exists in the data. There are several methods available in literature to overcome this problem. We propose a new stochastic restricted biased estimator. We study the statistical properties of the proposed estimator and compare its performance with some existing estimators in the sense of scalar mean squared criterion. An example and a simulation study are provided to illustrate the performance of the proposed estimator.KEYWORDS: Logistic regression, maximum likelihood estimator, mean squared error matrix, ridge regression, simulation study, stochastic restricted estimatorMathematics Subject Classifications: Primary 62J05, Secondary 62J07     

An alternative local polynomial estimator for the error-in-variables problem

We consider the problem of estimating a regression function when a covariate is measured with error. Using the local polynomial estimator of Delaigle et al. [(2009), ‘A Design-adaptive Local Polynomial Estimator for the Errors-in-variables Problem’, Journal of the American Statistical Association, 104, 348–359] as a benchmark, we propose an alternative way of solving the problem without transforming the kernel function. The asymptotic properties of the alternative estimator are rigorously studied. A detailed implementing algorithm and a computationally efficient bandwidth selection procedure are also provided. The proposed estimator is compared with the existing local polynomial estimator via extensive simulations and an application to the motorcycle crash data. The results show that the new estimator can be less biased than the existing estimator and is numerically more stable.