On block designs arising from rank 3 graphs

In this paper a criterion showing when the orbit of a subgraph of a given rank 3 graph forms a block design, is given. As an application several classes of block designs are derived from the triangular graph T(n) and the lattice graph L₂(n).     

Note on Draper and Lin's article “capacity considerations for two-level fractional factorial designs”

In Table 4 of Draper and Lin (1990) the authors present eleven 2^{k − p}_R designs for which doubt is expressed as to whether they are saturated. This note removes doubt on nine of these designs indicating that they are indeed saturated. Some observations are made in terms of the resolution of a design for the remaining two designs among the 11. The conclusions are derived by properly interpreting an updated table of binary linear codes of Verhoeff (1987).     

Optimal designs for approximating the path of a stochastic process

We consider a centered stochastic process {X(t):t ∈ T} with known and continuous covariance function. On the basis of observations X(t₁), …, X(t_n) we approximate the whole path by orthogonal projection and measure the performance of the chosen design d = (t₁, …, t_n)′ by the corresponding mean squared L²-distance. For covariance functions on T² = [0, 1]², which satisfy a generalized Sacks-Ylvisaker regularity condition of order zero, we construct asymptotically optimal sequences of designs. Moreover, we characterize the achievement of a lower error bound, given by Micchelli and Wahba (1981), and study the question of whether this bound can be attained.     

Incomplete block designs for symmetrical parallel line assays

New series of incomplete block designs for symmetrical parallel lines are proposed. From these designs important contrasts like L_p, L₁ and L′₁ are estimated free from block effects. In addition to these, other odd order contrasts are also estimated orthogonal to block effects. The designs are shown to have simple analysis.     

Comparison of rotatable designs for regression on balls,I (quadratic)

Designs for quadratic and cubic regression are considered when the possible choices of the controlable variable are points x=( x₁,x₂,…,x_q) in the q-dimensional. Full of radius R, B_q(R) ={x:Σ⁴_ix²_i?R²}. The designs that are optimum among rotatable designs with respect to the D-, A-, and E-optimality criteria are compared in their performance relative to these and other criteria, including extrapolation. Additionally, the performance of a design optimum for one value of R, when it is implemented for a different value of R, is investigated. Some of the results are developed algebraically; others, numerically. For example, in quadratic regression the A-optimum design appears to be fairly robust in its efficiency, under variation of criterion.     

Nonlinear orthogonal series estimates for random design regression

Let (X,Y) be a pair of random variables with supp(X)⊆[0,1] and EY²<∞. Let m be the corresponding regression function. Estimation of m from i.i.d. data is considered. The L₂ error with integration with respect to the design measure μ (i.e., the distribution of X) is used as an error criterion.Estimates are constructed by estimating the coefficients of an orthonormal expansion of the regression function. This orthonormal expansion is done with respect to a family of piecewise polynomials, which are orthonormal in L₂(μ_n), where μ_n denotes the empirical design measure.It is shown that the estimates are weakly and strongly consistent for every distribution of (X,Y). Furthermore, the estimates behave nearly as well as an ideal (but not applicable) estimate constructed by fitting a piecewise polynomial to the data, where the partition of the piecewise polynomial is chosen optimally for the underlying distribution. This implies e.g., that the estimates achieve up to a logarithmic factor the rate n^−2p/(2p+1), if the underlying regression function is piecewise p-smooth, although their definition depends neither on the smoothness nor on the location of the discontinuities of the regression function.     

Weighted A-optimality for fractional 2m factorial designs of resolution V

A weighted A-optimality (WA-optimality) criterion is discussed for selecting a fractional 2^m factorial design of resolution V. A WA-optimality criterion having one weight may be considered for designs. It is shown that designs derived from orthogonal arrays are WA-optimal for any weight. From a WA-optimal design, a procedure for finding WA-optimal designs for various weights is given. WA-optimal balanced designs are presented for 4 ⩽ m ⩽ 7 and for the values of n assemblies in certain ranges. It is pointed out that designs for m = 7 and for n = 41, 42 given in Chopra and Srivastava (1973a) or in the corrected paper by Chopra et al. (1986), are not A-optimal.     

2<Superscript><Emphasis Type="Italic">m</Emphasis></Superscript>4<Superscript>1</Superscript> designs with minimum aberration or weak minimum aberration

For measuring the goodness of 2 ^m 4¹ designs, Wu and Zhang (1993) proposed the minimum aberration (MA) criterion. MA 2 ^m 4¹ designs have been constructed using the idea of complementary designs when the number of two-level factors, m, exceeds n/2, where n is the total number of runs. In this paper, the structures of MA 2 ^m 4¹ designs are obtained when m>5n/16. Based on these structures, some methods are developed for constructing MA 2 ^m 4¹ designs for 5n/16<m<n/2 as well as for n/2≤m<n. When m≤5n/16, there is no general method for constructing MA 2 ^m 4¹ designs. In this case, we obtain lower bounds for A ₃₀ and A ₃₁, where A ₃₀ and A ₃₁ are the numbers of type 0 and type 1 words with length three respectively. And a method for constructing weak minimum aberration (WMA) 2 ^m 4¹ designs (A ₃₀ and A ₃₁ achieving the lower bounds) is demonstrated. Some MA or WMA 2 ^m 4¹ designs with 32 or 64 runs are tabulated for practical use, which supplement the tables in Wu and Zhang (1993), Zhang and Shao (2001) and Mukerjee and Wu (2001).     

Many (22, 44, 14, 7, 4) — and (15, 42, 14, 5, 4)-balanced incomplete block designs

A Balanced Incomplete Block Design (BIBD) is a pair (V, B) where V is a v-set and B is a collection of b k-subsets of V, called blocks, such that every element of V occurs in exactly r of the k-subsets and every 2-subset of V occurs in exactly λ of the blocks. The number of non-isomorphic designs of a BIBD (22, 44, 14, 7, 4) whose automorphism group is divisible by 7 or 11 are investigated. From this work, results are obtained on the number of non-isomorphic BIBDs (15, 42, 14, 5, 4).     

Addition of runs to a two-level supersaturated design

The purpose of this article is to introduce a new class of extended E(s²)-optimal two level supersaturated designs obtained by adding runs to an existing E(s²)-optimal two level supersaturated design. The extended design is a union of two optimal SSDs belonging to different classes. New lower bound to E(s²) has been obtained for the extended supersaturated designs. Some examples and a small catalogue of E(s²)-optimal SSDs are also included.     

A Lower Bound for the Wrap-around L2-discrepancy on Combined Designs of Mixed Two- and Three-level Factorials

The objective of this article is to study the issue of employing the uniformity criterion measured by wrap-around L₂-discrepancy to assess the optimal foldover plans. For mixed two- and three-level fractional factorials as the original designs, general foldover plan and combined design under a foldover plan are defined, and the equivalence between any foldover plan and its complementary foldover plan is investigated. A lower bound of wrap-around L₂-discrepancy of combined designs under a general foldover plan is obtained, which can be used as a benchmark for searching optimal foldover plans. Moreover, it also provides a theoretical justification for optimal foldover plans in terms of uniformity criterion.     

Non-isomorphic solutions of group divisible designs with k = 3 and λ1 = 0

Some regular and semi-regular group divisible designs with block size three are constructed through triple systems to provide new non-isomorphic solutions, most of which are α-resolvable for α ϵ {2, 3, 4}.     

An effective construction method for multi-level uniform designs

Uniform designs are widely used in various applications. However, it is computationally intractable to construct uniform designs, even for moderate number of runs, factors and levels. We establish a linear relationship between average squared centered L₂-discrepancy and generalized wordlength pattern, and then based on it, we propose a general method for constructing uniform designs with arbitrary number of levels. The main idea is to choose a generalized minimum aberration design and then permute its levels. We propose a novel stochastic algorithm and obtain many new uniform designs that have smaller centered L₂-discrepancies than the existing ones.     

On optimality properties of simple block designs in the approximate design theory

Optimality properties of approximate block designs are studied under variations of (1) the class of competing designs, (2) the optimality criterion, (3) the parametric function of interest, and (4) the statistical model. The designs which are optimal turn out to be the product of their treatment and block marginals, and uniform designs when the support is specified in advance. Optimality here means uniform, universal, and simultaneous j_p-optimality. The classical balanced incomplete block designs are embedded into this approach, and shown to be simultaneously j_p-optimal for a maximal system of identifiable parameters. A geometric account of universal optimality is given which applies beyond the context of block designs.     

A general construction of E(fNOD)-optimal multi-level supersaturated designs

The present paper deals with E(f_NOD)-optimal multi-level supersaturated designs. We present a new technique for the construction of supplementary difference sets. Based on the new supplementary difference sets, we also provide E(f_NOD)-optimal multi-level supersaturated designs with a large number of columns when compared with other designs. Moreover, these designs retain the equal occurrence property.     

2m fractional factorial designs of resolution V with high A-efficiency, 7 ⩽ m ⩽ 10

We present 111 2^m fractional factorial designs of resolution V for 7 ⩽ m ⩽ 10. These designs are the best known to the authors with respect to the A-optimality criterion (as of October 1995).     

Uniformity in factorial designs with mixed levels

The uniformity can be utilized as a measure for comparing factorial designs. Fang and Mukerjee (Biometrika 87 (2000) 193–198) and Fang et al. (in: K.T. Fang, F.J. Hickernell, H. Niederreiter (Eds.), Monte Carlo and Quasi-Monte Carlo Methods 2000, Springer, Berlin, 2002) found links among uniformity in terms of some non-uniformity measures, orthogonality and aberration for regular symmetric factorials. In this paper we extend their results to asymmetric factorials by considering a so-called wrap-around L₂-discrepancy to evaluate the uniformity of factorials. Furthermore, a lower bound of wrap-around L₂-discrepancy is obtained for asymmetric factorials and two new ways of construction of factorial designs with mixed levels are proposed.     

Characterization by invariance under length-biasing and random scaling

A positive random variable X with law L(X) and finite moment of order r > 0 has an induced length-biased law of order r, denoted by L(X_r). Let V ⩾ 0 be independent of X_r. A characterization problem seeks solution pairs (L(X), L(V)) for the “in-law” equation X ≅ VX_r, where ≅ denotes equality in law. A renewal process interpretation asks when is the random rescaling of the stationary total lifetime VX₁ equal in law to a typical lifetime X? Solutions are known in special cases.A comprehensive existence/uniqueness theory is presented, and many consequences are explored. Unique solutions occur when − log X and − log V have spectrally positive infinitely divisible laws. Particular cases are explored.Connections with the stationary lifetime law of renewal theory also are investigated.     

Minimax regression designs for approximately linear models with autocorrelated errors

We study the construction of regression designs, when the random errors are autocorrelated. Our model of dependence assumes that the spectral density g(ω) of the error process is of the form g(ω) = (1 − α)g₀(ω) + αg₁(ω), where g₀(ω) is uniform (corresponding to uncorrelated errors), α ϵ [0, 1) is fixed, and g₁(ω) is arbitrary. We consider regression responses which are exactly, or only approximately, linear in the parameters. Our main results are that a design which is asymptotically (minimax) optimal for uncorrelated errors retains its optimality under autocorrelation if the design points are a random sample, or a random permutation, of points from this distribution. Our results are then a partial extension of those of Wu (Ann. Statist. 9 (1981), 1168–1177), on the robustness of randomized experimental designs, to the field of regression design.