A control chart based on weighted bootstrap with strata

The study proposes a weighted bootstrap control chart based on the strata and determines suitable weights for each stratum by measuring the relative error of estimated Type I risks (Err). In addition to validating the detection effectiveness of the proposed control chart, this study also compares several types of control charts for detecting the Type I, Type II risks, and median run lengths. The proposed control chart shows superior detection effectiveness in six skewed distributions compared to other types of control charts.     

Multivariate CUSUM and EWMA Control Charts for Skewed Populations Using Weighted Standard Deviations

This article proposes a heuristic method of constructing multivariate cumulative sum and exponentially weighted moving average control charts for skewed populations based on the weighted standard deviation method which adjusts the variance–covariance matrix of quality characteristics and approximates the probability density function using several multivariate normal distributions. These control charts, however, reduce to the conventional control charts when the underlying distribution is symmetric. In-control and out-of-control average run lengths of the proposed control charts are compared with those of the conventional control charts for multivariate lognormal and Weibull distributions. Simulation results show that considerable improvements over the standard method can be achieved when the underlying distribution is skewed.     

A new approach for monitoring process variance

ABSTRACT

Control charts are effective tools for signal detection in both manufacturing processes and service processes. Much service data come from a process with variables having non-normal or unknown distributions. The commonly used Shewhart variable control charts, which depend heavily on the normality assumption, should not be properly used in such circumstances. In this paper, we propose a new variance chart based on a simple statistic to monitor process variance shifts. We explore the sampling properties of the new monitoring statistic and calculate the average run lengths (ARLs) of the proposed variance chart. Furthermore, an arcsine transformed exponentially weighted moving average (EWMA) chart is proposed because the ARLs of this modified chart are more intuitive and reasonable than those of the variance chart. We compare the out-of-control variance detection performance of the proposed variance chart with that of the non-parametric Mood variance (NP-M) chart with runs rules, developed by Zombade and Ghute [Nonparametric control chart for variability using runs rules. Experiment. 2014;24(4):1683–1691], and the nonparametric likelihood ratio-based distribution-free exponential weighted moving average (NLE) chart and the combination of traditional exponential weighted moving average (EWMA) mean and EWMA variance (CEW) control chart proposed by Zou and Tsung [Likelihood ratio-based distribution-free EWMA control charts. J Qual Technol. 2010;42(2):174–196] by considering cases in which the critical quality characteristic has a normal, a double exponential or a uniform distribution. Comparison results showed that the proposed chart performs better than the NP-M with runs rules, and the NLE and CEW control charts. A numerical example of service times with a right-skewed distribution from a service system of a bank branch in Taiwan is used to illustrate the application of the proposed variance chart and of the arcsine transformed EWMA chart and to compare them with three existing variance (or standard deviation) charts. The proposed charts show better detection performance than those three existing variance charts in monitoring and detecting shifts in the process variance.     

The Generally Weighted Moving Average Variance Chart

This article extends the generally weighted moving average (GWMA) technique for detecting changes in process variance. The proposed chart is called the generally weighted moving average variance (GWMAV) chart. Simulation is employed to evaluate the average run length (ARL) characteristics of the GWMAV and EWMA control charts. An extensive comparison of these control charts reveals that the GWMAV chart is more sensitive than the EWMA control charts for detecting small shifts in the variance of a process when the shifts are below 1.35 standard deviations. Additionally, the GWMAV control chart performs little better when the variance shifts are between 1.35 and 1.5 standard deviation, and the 2 charts performs similar when the variance shifts are above 1.5 standard deviation. The design of the GWMAV chart is also discussed.     

Combined Exponentially Weighted Moving Average Charts for the Mean and Variance Based on the Predictive Distribution

This article develops combined exponentially weighted moving average (EWMA) charts for the mean and variance of a normal distribution. A Bayesian approach is used to incorporate parameter uncertainty. We first use a Bayesian predictive distribution to construct the control chart, and we then use a sampling theory approach to evaluate it under various hypothetical specifications for the data generation model. Simulations are used to compare the proposed charts for different values of both the weighing constant for the exponentially weighted moving averages and for the size of the calibration sample that is used to estimate the in-statistical-control process parameters. We also examine the separate performance of the EWMA chart for the variance.     

Progressive Variance Control Charts for Monitoring Process Dispersion

In a process, the deviation from location or scale parameters affects the quality of the process and waste resources. So it is essential to monitor such processes for possible changes due to any assignable causes. Control charts are the most famous tool used to meet this intention. It is useless to monitor process location until the assurance that process dispersion is in-control. This study proposes some new two-sided memory control charts named as progressive variance (PV) control charts which are based on sample variance to monitor changes in process dispersion assuming normality of quality characteristic to be monitored. Simulation studies are made, and an example is discussed to evaluate the performance of the proposed charts. The comparison of the proposed chart is made with exponentially weighted moving average- and cumulative sum-type charts for process dispersion. The study shows that performance of the proposed charts are uniformly better than its competitors for detecting positive shifts while for detecting negative shift in the variance their performance is better for small shifts and reasonably good for moderated shifts.     

A weighted likelihood ratio test-based chart for monitoring process mean and variability

In this paper, a new single exponentially weighted moving average (EWMA) control chart based on the weighted likelihood ratio test, referred to as the WLRT chart, is proposed for the problem of monitoring the mean and variance of a normally distributed process variable. It is easy to design, fast to compute, and quite effective for diverse cases including the detection of the decrease in variability and individual observation case. The optimal parameters that can be used as a design aid in selecting specific parameter values based on the average run length (ARL) and the sample size are provided. The in-control (IC) and out-of-control (OC) performance properties of the new chart are compared with some other existing EWMA-type charts. Our simulation results show that the IC run length distribution of the proposed chart is similar to that of a geometric distribution, and it provides quite a robust and satisfactory overall performance for detecting a wide range of shifts in the process mean and/or variability.     

Monitoring simple linear profiles using variable sample size schemes

ABSTRACT

Profile monitoring is one of the new research areas in statistical process control. Most of the control charts in this area are designed with fixed sampling rate which makes the control chart slow in detecting small to moderate shifts. In order to improve the performance of the conventional fixed control charts, adaptive features are proposed in which, one or more design parameters vary during the process. In this paper the variable sample size feature of EWMA₃ and MEWMA schemes are proposed for monitoring simple linear profiles. The EWMA₃ method is based on the combination of three exponentially weighted moving average (EWMA) charts for monitoring three parameters of a simple linear profile separately and the Multivariate EWMA (MEWMA) chart is based on the using a single chart to monitor the coefficients and variance of a general linear profile. Also a two-sided control chart is proposed for monitoring the standard deviation in the EWMA₃ method. The performance of the proposed charts is compared in terms of the average time to signal. Numerical examples show that using adaptive features increase the power of control charts in detecting the parameter shifts. Finally, the performance of the proposed variable sample size schemes is illustrated through a real case in the leather industry.     

A Multivariate Synthetic Control Chart for Monitoring the Process Mean Vector of Skewed Populations Using Weighted Standard Deviations

This article proposes a multivariate synthetic control chart for skewed populations based on the weighted standard deviation method. The proposed chart incorporates the weighted standard deviation method into the standard multivariate synthetic control chart. The standard multivariate synthetic chart consists of the Hotelling's T ² chart and the conforming run length chart. The weighted standard deviation method adjusts the variance–covariance matrix of the quality characteristics and approximates the probability density function using several multivariate normal distributions. The proposed chart reduces to the standard multivariate synthetic chart when the underlying distribution is symmetric. In general, the simulation results show that the proposed chart performs better than the existing multivariate charts for skewed populations and the standard T ² chart, in terms of false alarm rates as well as moderate and large mean shift detection rates based on the various degrees of skewnesses.     

Nonparametric quality control charts based on the sign statistic

Nonparametric control chart are presented for the problem of detecting changes in the process median (or mean), or changes in the process variability when samples are taken at regular time intervals. The proposed procedures are based on sign-test statistics computed for each sample, and are used in Shewhart and cumulative sum control charts. When the process is in control the run length distributions for the proposed nonparametric control charts do not depend on the distribution of the observations. An additional advantage of the non-parametric control charts is that the variance of the process does not need to be established in order to set up a control chart for the mean. Comparisons with the corresponding parametric control charts are presented. It is also shown that curtailed sampling plans can considerably reduce the expected number of observations used in the Shewhart control schemes based on the sign statistic.     

Generally weighted moving average control charts using repetitive sampling

Abstract

Generally weighted moving average (GWMA) control charts have been validated for effective detection of small process shifts, and perform better than exponentially weighted moving average (EWMA) control charts. These charts are available based on single sampling; however, repetitive sampling charts have received less attention. Here, a GWMA control chart based on repetitive sampling (namely an RS-GWMA chart) is proposed for enhancing detectability of small process shifts. Simulations show that the proposed RS-GWMA chart with large design and small adjustment parameters outperforms existing hybrid EWMA (HEWMA) control charts based on repetitive sampling. An in-silico example is considered for demonstrating the applicability of the proposed RS-GWMA chart.     

A nonparametric approach to detecting the difference of survival medians

Some nonparametric methods have been proposed to compare survival medians. Most of them are based on the asymptotic null distribution to estimate the p-value. However, for small to moderate sample sizes, those tests may have inflated Type I error rate, which makes their application limited. In this article, we proposed a new nonparametric test that uses bootstrap to estimate the sample mean and variance of the median. Through comprehensive simulation, we show that the proposed approach can control Type I error rates well. A real data application is used to illustrate the use of the new test.     

New control charts for simultaneous monitoring of the mean vector and covariance matrix of multivariate multiple linear profiles

Simultaneous monitoring of the mean vector and covariance matrix in multivariate processes allows practitioners to avoid the inflated false alarm rate that results from using two independent control charts. In this paper, we extend exponentially weighted moving average semicircle and generally weighted moving average semicircle control charts to monitor the mean vector and covariance matrix of multivariate multiple linear regression profiles in Phase II simultaneously. These new control charts are compared with the existing control charts in the literature in terms of the average run length criterion. Finally, a case is considered to show the application of the proposed charts.     

Monitoring of zero-inflated binomial processes with a DEWMA control chart

Control charts are widely used for monitoring quality characteristics of high-yield processes. In such processes where a large number of zero observations exists in count data, the zero-inflated binomial (ZIB) models are more appropriate than the ordinary binomial models. In ZIB models, random shocks occur with probability θ, and upon the occurrence of random shocks, the number of non-conforming items in a sample of size n follows the binomial distribution with proportion p. In the present article, we study in more detail the exponentially weighted moving average control chart based on ZIB distribution (ZIB-EWMA) and we also propose a new control chart based on the double exponentially weighted moving average statistic for monitoring ZIB data (ZIB-DEWMA). The two control charts are studied in detecting upward shifts in θ or p individually, as well as in both parameters simultaneously. Through a simulation study, we compare the performance of the proposed chart with the ZIB-Shewhart, ZIB-EWMA and ZIB-CUSUM charts. Finally, an illustrative example is also presented to display the practical application of the ZIB charts.     

An exponentially weighted moving average chart controlling false discovery rate

A new control chart is developed by using the exponentially weighted moving average (EWMA) statistics and a multiple testing procedure for controlling false discovery rate. The multiple testing procedure considers not only the current EWMA statistic, but also a given number of previous statistics at the same time. Numerical simulations are accomplished to evaluate the performance of the proposed control chart in terms of the average run length and the conditional expected delay. The results are compared with those of the existing control charts including the X-bar chart, EWMA, and cumulative sum control charts. Case studies with real data-sets are also presented.     

The extended GWMA control chart

This study extends the generally weighted moving average (GWMA) control chart by imitating the double exponentially weighted moving average (DEWMA) technique. The proposed chart is called the double generally weighted moving average (DGWMA) control chart. Simulation is employed to evaluate the average run length characteristics of the GWMA, DEWMA and DGWMA control charts. An extensive comparison of these control charts reveals that the DGWMA control chart with time-varying control limits is more sensitive than the GWMA and the DEWMA control charts for detecting medium shifts in the mean of a process when the shifts are between 0.5 and 1.5 standard deviations. Additionally, the GWMA control chart performs better when the mean shifts are below the 0.5 standard deviation, and the DEWMA control performs better when the mean shifts are above the 1.5 standard deviation. The design of the DGWMA control chart is also discussed.     

Effect of measurement error on exponentially weighted moving average control charts under ranked set sampling schemes

Control charts are a powerful statistical process monitoring tool often used to monitor the stability of manufacturing processes. In quality control applications, measurement errors adversely affect the performance of control charts. In this paper, we study the effect of measurement error on the detection abilities of the exponentially weighted moving average (EWMA) control charts for monitoring process mean based on ranked set sampling (RSS), median RSS (MRSS), imperfect RSS (IRSS) and imperfect MRSS (IMRSS) schemes. We also study the effect of multiple measurements and non-constant error variance on the performances of the EWMA control charts. The EWMA control chart based on simple random sampling is compared with the EWMA control charts based on RSS, MRSS, IRSS and IMRSS schemes. The performances of the EWMA control charts are evaluated in terms of out-of-control average run length and standard deviation of run lengths. It turns out that the EWMA control charts based on MRSS and IMRSS schemes are better than their counterparts for all measurement error cases considered here.     

Robustness to non-normality and autocorrelation of individuals control charts

This paper studies the effects of non-normality and autocorrelation on the performances of various individuals control charts for monitoring the process mean and/or variance. The traditional Shewhart X chart and moving range (MR) chart are investigated as well as several types of exponentially weighted moving average (EWMA) charts and combinations of control charts involving these EWMA charts. It is shown that the combination of the X and MR charts will not detect small and moderate parameter shifts as fast as combinations involving the EWMA charts, and that the performana of the X and MR charts is very sensitive to the normality assumption. It is also shown that certain combinations of EWMA charts can be designed to be robust to non-normality and very effective at detecting small and moderate shifts in the process mean and/or variance. Although autocorrelation can have a significant effect on the in-control performances of these combinations of EWMA charts, their relative out-of-control performances under independence are generally maintained for low to moderate levels of autocorrelation.     

A New Procedure to Monitor the Mean of a Quality Characteristic

The Shewhart, Bonferroni-adjustment, and analysis of means (ANOM) control charts are typically applied to monitor the mean of a quality characteristic. The Shewhart and Bonferroni procedure are utilized to recognize special causes in production process, where the control limits are constructed by assuming normal distribution for known parameters (mean and standard deviation), and approximately normal distribution regarding to unknown parameters. The ANOM method is an alternative to the analysis of variance method. It can be used to establish the mean control charts by applying equicorrelated multivariate non central t distribution. In this article, we establish new control charts, in phases I and II monitoring, based on normal and t distributions having as a cause a known (or unknown) parameter (standard deviation). Our proposed methods are at least as effective as the classical Shewhart methods and have some advantages.     

Economic statistical design of x ¥ control charts for systems with gamma ( 5 ,2) in-control times

In this paper, gamma ( 5 ,2) distribution is considered as a failure model for the economic statistical design of x ¥ control charts. The study shows that the statistical performance of control charts can be improved significantly, with only a slight increase in the cost, by adding constraints to the optimization problem. The use of an economic statistical design instead of an economic design results in control charts that may be less expensive to implement, that have lower false alarm rates, and that have a higher probability of detecting process shifts. Numerical examples are presented to support this proposition. The results of economic statistical design are compared with those of a pure economic design. The effects of adding constraints for statistical performance measures, such as Type I error rate and the power of the chart, are extensively investigated.