R-Symmetry and the Power Functions of the Tests for Inverse Gaussian Means

The two-parameter Inverse Gaussian (IG) distribution is often appropriate for modeling non negative right-skewed data due to the striking similarities with the Gaussian distribution in its basic properties and inference methods. There are about 40 such G-IG analogies developed in literature and were most recently tabulated by Mudholkar and Wang. Of these, the earliest and most commonly noted similarities are the significance tests based on student's t and F distribution for the homogeneity of one, two or several means of the IG populations. However, unlike the corresponding tests in Gaussian theory, little is known about the power function of the basic tests. In this article, we employ the IG-related root-reciprocal IG distribution and a notion of Reciprocal Symmetry to establish the monotonicity of the power function of the test of significance for the IG mean.     

Monte Carlo comparison of five exponentiality tests using different entropy estimates

The paper studies five entropy tests of exponentiality using five statistics based on different entropy estimates. Critical values for various sample sizes determined by means of Monte Carlo simulations are presented for each of the test statistics. By simulation, we compare the power of these five tests for various alternatives and sample sizes.     

Tests of fit for the Gumbel distribution: EDF-based tests against entropy-based tests

In this article, we propose some tests of fit based on sample entropy for the composite Gumbel (Extreme Value) hypothesis. The proposed test statistics are constructed using different entropy estimates. Through a Monte Carlo simulation, critical values of the test statistics for various sample sizes are obtained. Since the tests based on the empirical distribution function (EDF) are commonly used in practice, the power values of the entropy-based tests with those of the EDF tests are compared against various alternatives and different sample sizes. Finally, two real data sets are modeled by the Gumbel distribution.KEYWORDS: Entropy estimator, Gumbel distribution, Monte Carlo simulation, test power     

Entropy-based tests of uniformity: A Monte Carlo power comparison

In this article, we consider different entropy estimators and propose some entropy-based tests of uniformity. Critical values of the proposed test statistics are obtained by Monte Carlo simulation. Then the power values of the tests for various alternatives and sample sizes are compared. Finally, some recommendations for the application of the proposed tests in practice are presented.     

Estimation of Parameters of a Mixed Failure Time Distribution Which is a Mixture of Degenerate (Degenerate at Zero) and I. G. Distribution

The problem of estimation of parameters of a mixture of degenerate (at zero) and exponential distribution is considered by Jayade and Prasad (1990). The sampling scheme proposed in it is extended in this paper to a mixture of degenerate and Inverse Gaussian distribution. The Inverse Gaussian distribution is very relevant for studying reliability and life-testing problems. The inverse Gaussian being the first passage time distribution for Wiener process makes it particularly appropriate for failure or reaction time data analysis.     

Estimation of the parameters of the Gompertz distribution under the first failure-censored sampling plan

This article presents the goodness-of-fit tests for the Laplace distribution based on its maximum entropy characterization result. The critical values of the test statistics estimated by Monte Carlo simulations are tabulated for various window and sample sizes. The test statistics use an entropy estimator depending on the window size; so, the choice of the optimal window size is an important problem. The window sizes for yielding the maximum power of the tests are given for selected sample sizes. Power studies are performed to compare the proposed tests with goodness-of-fit tests based on the empirical distribution function. Simulation results report that entropy-based tests have consistently higher power than EDF tests against almost all alternatives considered.     

On the linear combinations of the means of inverse gaussian distributions

Consider the two parameter Inverse Gaussian distribution with mean μ and scale parameter λ.

Suppose one is interested in testing a problem on a linear combination for the means of Inverse Gaussian distributions. For this problem a test and confidence intervals are proposed when: (1) λ’s are known and; (2) λ’s are unknown.

Finally an application of the procedures is illustrated with a data set of failure times of high-speed turbine bearings.     

An entropy-based test for goodness of fit of the von mises distribution

The maximum entropy characterization of the von Mises distribution on the circle is exploited to derive a consistent goodness of fit test for the von Mises distribution. Monte Carlo simulation results are tabulated giving critical values of the test statistic for various sample sizes and values of the concentration parameter. A power analysis is presented for various alternative hypotheses, comparing this entropy statistic to two other competing goodness of fit statistics. The entropy statistic is shown to compare favorably and may be more attractive, especially considering its ease of computation.     

Goodness-of-Fit Tests Based on Correcting Moments of Entropy Estimators

In this article, we consider the entropy estimator introduced by Alizadeh Noughabi and Arghami (2010) and derive the nonparametric distribution function corresponding to our estimator as a piece-wise uniform distribution. We use the results to introduce goodness-of-fit tests for the normal and the exponential distributions. The critical values and powers for some alternatives are obtained by simulation. The powers of the proposed tests under various alternatives are compared with the competitors.     

Efficiency of ranked set sampling in entropy estimation and goodness-of-fit testing for the inverse Gaussian law

When measuring units are expensive or time consuming, while ranking them is relatively easy and inexpensive, it is known that ranked set sampling (RSS) is preferable to simple random sampling (SRS). Many authors have suggested several extensions of RSS. As a variation, Al-Saleh and Al-Kadiri [Double ranked set sampling, Statist. Probab. Lett. 48 (2000), pp. 205–212] introduced double ranked set sampling (DRSS) and it was extended by Al-Saleh and Al-Omari [Multistage ranked set sampling, J. Statist. Plann. Inference 102 (2002), pp. 273–286] to multistage ranked set sampling (MSRSS). The entropy of a random variable (r.v.) is a measure of its uncertainty. It is a measure of the amount of information required on the average to determine the value of a (discrete) r.v.. In this work, we discuss entropy estimation in RSS design and aforementioned extensions and compare the results with those in SRS design in terms of bias and root mean square error (RMSE). Motivated by the above observed efficiency, we continue to investigate entropy-based goodness-of-fit test for the inverse Gaussian distribution using RSS. Critical values for some sample sizes determined by means of Monte Carlo simulations are presented for each design. A Monte Carlo power analysis is performed under various alternative hypotheses in order to compare the proposed testing procedure with the existing methods. The results indicate that tests based on RSS and its extensions are superior alternatives to the entropy test based on SRS.     

Entropy estimation and goodness-of-fit tests for the inverse Gaussian and Laplace distributions using paired ranked set sampling

ABSTRACT

In this paper, Vasicek [A test for normality based on sample entropy. J R Stat Soc Ser B. 1976;38:54–59] entropy estimator is modified using paired ranked set sampling (PRSS) method. Also, two goodness-of-fit tests using PRSS are suggested for the inverse Gaussian and Laplace distributions. The new suggested entropy estimator and goodness-of-fit tests using PRSS are compared with their counterparts using simple random sampling (SRS) via Monte Carlo simulations. The critical values of the suggested tests are obtained, and the powers of the tests based on several alternatives hypotheses using SRS and PRSS are calculated. It turns out that the proposed PRSS entropy estimator is more efficient than the SRS counterpart in terms of root mean square error. Also, the proposed PRSS goodness-of-fit tests have higher powers than their counterparts using SRS for all alternative considered in this study.     

Bayes Estimator of Inverse Gaussian Parameters Under General Entropy Loss Function Using Lindley's Approximation

In this article, we obtained Bayes estimators of parameters of Inverse Gaussian distributions under asymmetric loss function using Lindley's Approximation (L-Approximation). The proposed estimators have been compared with the corresponding estimators obtained under symmetric loss function and MLE for their risks. This comparison is illustrated using Monte-Carlo study of 2,000 simulated sample from the Inverse Gaussian distribution.     

Statistical inference for the extended generalized inverse Gaussian model

This paper deals with the extended generalized inverse Gaussian (EGIG) distribution which has more than one turning point of the failure rate for certain values of the parameters. The EGIG model is a versatile model for analysing lifetime data and has one additional parameter, δ, than the GIG model's three parameters [B. Jorgensen, Statistical Properties of the Generalized Inverse Gaussian Distribution, Springer-Verlag, New York, 1982]. For the EGIG model, the maximum-likelihood estimation of the four parameters is discussed and a score test is developed for testing the importance of the additional parameter, δ. A non-central chi-square approximation to the power of the score test is provided. Simulation studies are carried out to examine the performance of the score test and the Wald confidence intervals. Finally, an example discussed by Jorgensen [5] is provided to illustrate that the EGIG model fits the data better than the GIG of Jorgensen [5]. Three other examples are presented and the power comparisons are displayed for each.     

Moments of nonparametric probability density functions of entropy estimators applied to testing the inverse Gaussian distribution

The inverse Gaussian (IG) distribution is widely used to model data and then it is important to develop efficient goodness of fit tests for this distribution. In this article, we introduce some new test statistics for examining the IG goodness of fit based on correcting moments of nonparametric probability density functions of entropy estimators. These tests are consistent against all alternatives. Critical points and power of the tests are explored by simulation. We show that the proposed tests are more powerful than competitor tests. Finally, the proposed tests are illustrated by real data examples.     

POWER FUNCTION FOR INVERSE GAUSSIAN REGRESSION MODELS

Inverse Gaussian regression models are useful for data where both the independent and dependent variable are nonnegative and the variance of the dependent variable depends on the independent variable. Zero intercept inverse Gaussian regression models are presented with nonconstant variance, constant ratio of variance to the mean and constant coefficient of variation. The power function for testing hypotheses about the slope is given for all of these models.     

Calibration for inverse gaussian regression

Inverse Gaussian regression models are useful for regression data where both variables are nonnegative and the variance of the dependent variable depends on the independent variable, Zero intercept inverse Gaussian regression models are presented with non-constant variance, constant ratio of variance to the mean and constant coefficient of variation, For purposes of calibration, the prediction band is used to give point and interval estimators for the independent variable, The results are illustrated with a real data set.     

A density-based empirical likelihood ratio goodness-of-fit test for the Rayleigh distribution and power comparison

The Rayleigh distribution has been used to model right skewed data. Rayleigh [On the resultant of a large number of vibrations of the some pitch and of arbitrary phase. Philos Mag. 1880;10:73–78] derived it from the amplitude of sound resulting from many important sources. In this paper, a new goodness-of-fit test for the Rayleigh distribution is proposed. This test is based on the empirical likelihood ratio methodology proposed by Vexler and Gurevich [Empirical likelihood ratios applied to goodness-of-fit tests based on sample entropy. Comput Stat Data Anal. 2010;54:531–545]. Consistency of the proposed test is derived. It is shown that the distribution of the proposed test does not depend on scale parameter. Critical values of the test statistic are computed, through a simulation study. A Monte Carlo study for the power of the proposed test is carried out under various alternatives. The performance of the test is compared with some well-known competing tests. Finally, an illustrative example is presented and analysed.     

Estimation of a process capability index for inverse gaussian distribution

In this article, interval estimates of Clements' process capability index are studied through bootstrapping when the underlying distribution is Inverse Gaussian. The standard bootstrap, the percentile bootstrap, and the bias-corrected percentile bootstrap confidence intervals are compared.     

Fitting Generalized Hyperbolic processes - New insights for generating initial values

The fitting of Lévy processes is an important field of interest in both option pricing and risk management. In literature, a large number of fitting methods requiring adequate initial values at the start of the optimization procedure exists. A so-called simplified method of moments (SMoM) generates by assuming a symmetric distribution these initial values for the Variance Gamma process, whereby the idea behind can be easily transferred to the Normal Inverse Gaussian process. However, the characteristics of the Generalized Hyperbolic process prevent such an easy adaption. Therefore, we provide by applying a Taylor series approximation for the modified Bessel function of the third kind, a Tschirnhaus transformation and a symmetric distribution assumption, a SMOM for the Generalized Hyperbolic distribution. Our simulation study compares the results of our SMoM with the results of the maximum likelihood estimation. The results show that our proposed approach is an appropriate and useful way for estimating Generalized Hyperbolic process parameters and significantly reduces estimation time.     

Graphical Tests for the Assumption of Gamma and Inverse Gaussian Frailty Distributions

The common choices of frailty distribution in lifetime data models include the Gamma and Inverse Gaussian distributions. We present diagnostic plots for these distributions when frailty operates in a proportional hazards framework. Firstly, we present plots based on the form of the unconditional survival function when the baseline hazard is assumed to be Weibull. Secondly, we base a plot on a closure property that applies for any baseline hazard, namely, that the frailty distribution among survivors at time t has the same form as the original distribution, with the same shape parameter but different scale parameter. We estimate the shape parameter at different values of t and examine whether it is constant, that is, whether plotted values form a straight line parallel to the time axis. We provide simulation results assuming Weibull baseline hazard and an example to illustrate the methods.