Construction of neighbor designs of block size 4 for all values of v ≥ 5 by using the method of addition

In this article, a general method of construction of neighbor block designs is given. The designs are constructed using variation of a simple method which we refer to as the method of addition (renamed as the method of cyclic shifts). We give complete solution of neighbor balanced designs for k = 4 for any value of v. We also give many series of generalized neighbor designs (GNDs). In the last section, we have constructed GNDs in a sequential manner (as Did John 1981) for v ≤ 50 and r is multiple of k.     

Non binary partially neighbor balanced designs for circular blocks

ABSTRACT

Neighbor designs are recommended for the cases where the performance of treatment is affected by the neighboring treatments as in biometrics and agriculture. In this paper we have constructed two new series of non binary partially neighbor balanced designs for v = 2n and v = 2n+1 number of treatments, respectively. The blocks in the design are non binary and circular but no treatment is ever a neighbor to itself. The designs proposed here are partially balanced in terms of nearest neighbors. No such series are known in the literature.     

Neighbor-Balanced Row-column Designs

In this article, row-column designs incorporating directional neighbor effects have been studied. A row-column design is said to be neighbor balanced if every treatment has all other treatments appearing as a neighbor a constant number of times. We considered here three different situations under row-column setup incorporating neighbor effects viz., row-column design with one-sided neighbor effect, two-sided neighbor effect, and four-sided neighbor effect. The information matrices for all the situations for estimating the direct and neighbor effects of treatments have been derived. Methods of constructing neighbor-balanced row-column designs have been developed and its characterization properties have been studied.     

Non-binary neighbor balance circular designs for v=2n and λ=2

Neighbor balance designs were first introduced by Rees (1967) in circular blocks for the use in serological research. Subsequently several researchers have defined the neighbor designs in different ways. In this paper, neighbor balance circular designs for (k≤v) block size are constructed for even number of treatments i.e. v=2n. No such series of designs is known in literature. Two theorems are developed for circular designs. Theorem 1 gives the non-binary circular blocks, whereas Theorem 2 generates binary circular blocks when n≤4 and non-binary blocks for n>4. In suggested designs no treatment is ever a neighbor of itself. Blocks are constructed in such a way that each treatment is a right and left neighbor of every other treatment for a fixed number of times say λ. Sizes of initial circular blocks are not same. One main guiding principle for such designs is to ensure economy in material use.     

Computer-Generated Neighbor Designs

Neighbor designs are useful to remove the neighbor effects. In this article, an algorithm is developed and is coded in Visual C + +to generate the initial block for possible first, second,…, and all order neighbor designs. To get the required design, a block (0, 1, 2,…, k ? 1) is then augmented with (v ? 1) blocks obtained by developing the initial block cyclically mod (v ? 1).     

Neighbor-Balanced Bipartite Block Designs

This article deals with the neighbor-balanced block design setting when there are two disjoint sets of treatments, one set consisting of test treatments and the other of control treatments. The interest here is to estimate the contrasts pertaining to test treatments vs. control treatments (with respect to direct and neighbors) with as high precision as possible. Some series of neighbor-balanced block designs for comparing a set of test treatments to a set of control treatments have been developed. The designs obtained are totally balanced in the sense that all the contrasts among test treatments for direct and neighbor effects are estimated with same variance and all the contrasts pertaining to test vs. control for direct and neighbor effects are estimated with the same variance.     

Generalized neighbor designs with block size 3

A generalized neighbor design relaxes the equality condition on the number of times two treatments as neighbors in the design. In this article, we have considered the construction of some classes of generalized neighbor designs with block size k=3 by using the method of cyclic shifts. The distinguishing feature of this construction method is that the properties of a design can easily be obtained from the sets of shifts instead of constructing the actual blocks of the design. A catalog of generalized neighbor designs with block size k=3 is compiled for v∈{5,6,…,18} treatments and for different replications. We provide the reader with a simpler method of construction, and in general the catalog that gives an open choice to the experimenter for selecting any class of neighbor designs.     

A note on circular neighbor balanced designs

ABSTRACT

This paper describes some methods of constructing circular neighbor balanced and circular partially neighbor balanced block designs for estimation of direct and neighbor effects of the treatments. A class of circular neighbor balanced block designs with unequal block sizes is also proposed.     

REDUCED RESIDUE CLASSES CYCLIC PBIB DESIGNS

A new general class of m-class cyclic association scheme is defined for v treatments, where v is a composite number. A simple method of construction of PBIB designs having this association scheme using more than one initial block and some methods using only one initial block are proposed. A complete analysis of this type of PBIB designs is given. Also given is a list of 39 useful PBIB designs of this type having v≤15 and r≤10 and having only three associate classes together with their efficiency factors for all types of comparisons and over all efficiency factors.     

On the E-optimality of complete block designs under a mixed interference model

In experiments in which the response to a treatment can be affected by other treatments, the interference model with neighbor effects is usually used. It is known that circular neighbor balanced designs (CNBDs) are universally optimal under such a model if the neighbor effects are fixed (Druilhet, 1999) or random (4 and 7). However, such designs cannot exist for every combination of design parameters. In the class of block designs with the same number of treatments as experimental units per block, a CNBD cannot exist if the number of blocks, b  , is equal to p(t−1)±1$p(t-1)\pm 1$, where p is a positive integer and t is the number of treatments. Filipiak et al. (2008) gave the structure of the left-neighboring matrix of E-optimal complete block designs with p  =1 under the model with fixed neighbor effects. The purpose of this paper is to generalize E-optimality results for designs with p∈N$p\in \mathbb{N}$ assuming random neighbor effects.     

Hypercubic designs and applications

In this paper we develop relatively easy methods for constructing hypercubic designs from symmetrical factorial experiments for t=v ^m treatments with v=2, 3. The proposed methods are easy to use and are flexible in terms of choice of possible block sizes.     

Some new construction of circular weakly balanced repeated measurements designs in periods of two different sizes

Abstract

Balanced repeated measurements designs (RMDs) balance out the residual effects. Williams Latin square designs work as minimal combinatorial balanced as well as variance balanced for RMDs for p (period sizes) = v (number of treatments). If minimal balanced RMDs cannot be constructed for the situations where p must be less than v then weakly balanced RMDs should be preferred. In this article, some generators are developed to generate circular weakly balanced RMDs in periods of two different sizes. To obtain the proposed designs, some construction procedures are also described for some of the cases where we could not develop generators.     

On Universal Optimality of Circular Weakly Neighbor Balanced Designs Under an Interference Model

In this article, the optimal design problem in a fixed effects interference model with left-neighbor effects is studied. It is known (Druilhet, 1999 Druilhet , P. ( 1999 ). Optimality of circular neighbor balanced designs . J. Statist. Plann. Infer. 81 : 141 – 152 .[Crossref], [Web of Science ®] , [Google Scholar]) that circular neighbor balanced designs (CNBDs) are universally optimal in such a model. We prove the universal optimality of circular weakly neighbor balanced designs (CWNBDs), which require a smaller number of blocks than CNBDs. CWNBDs with the number of blocks smaller than the number of treatments belong to the class of partially neighbor balanced designs (PNBDs) defined by Wilkinson et al. (1983 Wilkinson , G. N. , Eckert , R. , Hancock , T. W. , Mayo , O. ( 1983 ). Nearest neighbour (NN) analysis of field experiments . J. Roy. Statist. Soc. Ser. B 45 : 151 – 210 . [Google Scholar]). We give a construction method for some CWNBDs, with examples.     

Construction of circular partially balanced-Repeated measurement designs using cyclic shifts

Repeated measurement designs are widely used in medicine, pharmacology, animal sciences and psychology. These designs balance out the residual effects. The situations where balanced repeated measurements designs require a large number of the subjects, partially-balanced repeated measurements designs should be used. In this paper some infinite series are developed which provide circular partially-balanced repeated measurement designs for p (periods) even. Catalogues of circular partially-balanced repeated measurement designs are also presented for v (treatments) ≤ 100 with p = 5, 7 & 9.     

Simple constructions for minimal neighbor and GN2 designs in linear blocks

Minimal neighbor designs and GN₂ designs in linear blocks are constructed for all admissible parameter sets. The method is straightforward and uses subsequences of the LWW terrace as initial blocks from which the remaining blocks are generated.     

Serial arrays and change-over designs

Consider change-over designs for the comparison of v treatments. Each application has a direct effect and up to n?1 residual and/or interaction effects. An array is defined to be a serial array if: (1) all treatments occur equally often in each row and (2) reading down columns, all possible permutations of n consecutive treatments occur equally often in the array. A method of constructing (λv+n?1) Xv^{n ?1}, λ integral, serial arrays is given. Use of these arrays as change-over designs is discussed with emphasis on the inclusion of interaction effects.     

Optimal block designs comparing treatments with a control when the errors are correlated

The efficient design of experiments for comparing a control with v new treatments when the data are dependent is investigated. We concentrate on generalized least-squares estimation for a known covariance structure. We consider block sizes k equal to 3 or 4 and approximate designs. This method may lead to exact optimal designs for some v, b, k, but usually will only indicate the structure of an efficient design for any particular v, b, k, and yield an efficiency bound, usually unattainable. The bound and the structure can then be used to investigate efficient finite designs.     

Construction of Neighbor-Balanced Designs in Linear Blocks

Neighbor-balanced designs are useful to remove the neighbor effects in experiments where the performance of a treatment is affected by the treatments applied to its adjacent neighbors. In this article, neighbor-balanced designs are constructed in linear blocks of (i) equal sizes and (ii) two different sizes k ₁ and k ₂.     

Estimation of regression parameters in missing data problems

Let Y be a response variable, possibly multivariate, with a density function f (y|x, v; β) conditional on vectors x and v of covariates and a vector β of unknown parameters. The authors consider the problem of estimating β when the values taken by the covariate vector v are available for all observations while some of those taken by the covariate x are missing at random. They compare the profile estimator to several alternatives, both in terms of bias and standard deviation, when the response and covariates are discrete or continuous.     

TABLES OF SMALL OPTIMAL REPEATED MEASUREMENTS DESIGNS

This paper presents tables of the optimal repeated measurements designs for the estimation of direct effects and of residual effects for a model with independent errors, for up to n = 10 experimental units, for t= 2 treatments and p= 2, 3 or 4 periods, and for t= 3 treatments and p= 2 or 3 periods.